4.Remote controller
A:operations of remote controller
Rear view 6” TFT-LCD Monitor
MODE
2
3
5
1
4
1.Power: power on/of(when the monitor is powered on,press
POWER button to close menu,press and hold it for
1 second to power it off)
MENU
2.Mode: change the Av1 or Av2
1.Parts list
3.Menu: menu options (press MENU to shift different menus
4. :Analog +/- (adjust brightness,contrast,color,pos:DN
Normal (reverse image),etc.)
5. :Analog +/-(adjust brightness,contrast,color,pos:DN
Normal (reverse image),etc.)
MODE
MENU
B:Installation of batteries
A.6” TFT monitor
B.Remote controller
C.User’s manual
1
1
1
Back of remote controller
Battery slot
2.Diagram of installation
A:
Battery
Card bolt
5.Specification
Figure (1)
Figure (2)
Model
Display resolution
VTM600M
520(W)*288(H)
B:Connection
Red wire connects anode +12v
Black wire grounded
blue wire connects to reversing lamp 12v
System
PAL/NTSC
Video Av1 connects VCD/DVD signal input
Video Av2 connects camera singnal input
Power consumption
Monitor dimension
Storage temperature
Operation Voltage
8W (MAX)
10.46”(W)*4.17”(H)*1.03”(D)
3.Functions of Button
-4 F ~ ++149 F
DC12V
1.Menu: menu options (press MENU to shift different menus
2. :Analog +/- (adjust brightness,contrast,color,pos:DN Normal
(reverse image),etc.)
3.Power: power on/of(when the monitor is powered on,press
POWER button to close menu,press and hold it for
1 second to power it off)
Care instruction
1.We strongly recommend have qualified technician or maintenance to install this device.
2.If this monitor does not work well, please check the connection first.
4. :Analog +/-(adjust brightness,contrast,color,pos:DN Normal
(reverse image),etc.)
1 2 34 5
5.AV: change the Av1 or Av2
3.For your safety, please do not watch the monitor entertainment while you are driving
-2-
-1-
|