WELCO M E
We would like to personally thank you for choosing Xtant Technologies equip-
ment. Our mission is to continually provide you with the best mobile audio – any-
where. Our goal is to exceed your expectations. Our driving concepts are superior-
ity through simplicity, flexibility, compatibility, reliability, efficiency, and ease of
system expansion. We began with a clean slate. We challenged all the assumptions.
We enlisted a dream team of audio specialists; manufacturers, installers, designers
and audiophiles. We all became excited about the possibilities. We listened. We are
still listening.
We Listen to your recommendations, opinions, and needs .
We Listen to our fellow supporting manufacturers to ensure that our products
interface well with a wide variety of products.
We Listen to our equipment with sensitive and critical ears to provide the finest
mobile audio components on the planet.
We have created Xtant because we respect the music, and the people who want
to really listen. The result has expanded the expectations of extraordinarily vivid
mobile audio. Vivid mobile audio, a continuing evolution of the art of listing and
hearing, well. We believe that music deserves the maximum accuracy in reproduc-
tion. We have united art of the technology and the technology of the art to create the
magic. Xtant is only available through the finest specialized mobile audio retailers.
Your Xtant Select Dealer was chosen by us because of their passion for excellence
and their commitment to expanding their expertise. Please remember, exceptional
audio requires professional installation. Your Xtant Dealer will optimize your sys-
tem and your level of satisfaction.
Whether you are a professional competitor in auto sound or a privately passion-
ate connoisseur of fine music, we salute you, and appreciate your investment in
quality mobile audio. If you have a problem or a suggestion please give us a call or
write us. Thanks for having the faith in the music and the faith in us.
We look forward to a long and enduring relationship!
Welcome to Xtant!
TABLE O F CO N TEN TS
Sa f e g u a r d s
4
5
6
7
8
9
Xt a n t 220 0 ix
Sp e c if ic a t io n s
El e c t r o n ic Cr o sso v e r
O p t io n a l Ac c e sso r y M o d u l e s
M a in t e n a n c e
Cu st o m er Rel a t io n s / Tech n ica l Ser v ices 10
Wa r r a n t y
11
O w n e r ’s In st a l l a t io n Lo g
12
In st a l l e r ’s Re f e r e n c e
In se r t
SAFEGUARDS
Please take the time to read this Owners Manual.
The following guidelines are designed to assure a safe and
properly installed Xtant Mobile Audio System.
All Xtant amplifiers and accessories are intended to be installed by a certified
professional mobile audio installation specialist. It is the recommendation of
Xtant Technologies that your new Xtant product(s) and all of your mobile
audio products be installed by your Authorized Xtant Select Dealer.
In st a l l e r ’s Re f e r e n c e (in se r t )
The Installer’s Reference is an insert included in this manual. It is designed to
assist your Authorized Xtant Select Dealer ’s professional installer.
Installation techniques critical to the creation of a high-performance mobile
audio sound system, (procedures for running wires, basic safety rules, and
system layout concepts) are not presented in this owners manual. All
Authorized Xtant Select Dealers have been chosen for their expertise in sys-
tem design and advanced installation capabilities and Xtant highly recom-
mends that you have all of your mobile audio products professionally
installed. If, however, you choose to install your Xtant amplifier yourself,
please refer to the Installer’s Reference prior to installation.
Wir in g Re q u ir e m e n t s
All Xtant amplifiers have minimum wire gauge requirements for Power,
Ground, Remote Turn-On, and Speaker cables. Please refer to the Installer’s
Reference for recommended wire gauges.
Fu sin g Re q u ir e m e n t s
All Xtant amplifiers have on-board power fuses. However, it is recommend-
ed that a fuse of like value be installed at the positive terminal of the battery.
In the case of a multi-amp system, use a fuse value equal to the combined
value of all (system amplifier’s) on-board power fuses.
Wa t e r a n d M o ist u r e
Install all Xtant amplifiers and accessories in a location free of
moisture or exposure to water.
4
The 2200ix is a 2 channel amplifier designed to provide
exceptional flexibility and outstanding performance in a low
profile package. It can be utilized to operate a complete system
or, with its on-board crossover, dedicated to operate any specific section of a
multi-amp mobile audio system.
By utilizing the on-board crossover’s RCA line outputs, you can steer specif-
ic frequency ranges to additional amplifiers, thus, eliminating the need for
external, active crossover components in many system designs.
As part of the Xtant “ix” Series, the 2200ix incorporates the latest proprietary
technology in Thermal Management and exclusive Transitional Power
Supply, each working in harmony to improve amplifier efficiency. This
increased efficiency translates to less current draw while producing rated
power.
St a n d a r d Fe a t u r e s
Bo n d ed Fin Co o l in g : Aerospace technology with
forced con v ection coolin g for en h a n ced th er m a l
p er for m a n ce.
Tr a n sit io n a l Su ppl y : Fully regulated, high efficien-
cy power supply provides lower current draw at rated out-
put power.
Cr o sso v er : 18 dB per octave “Butterworth” filter network with selectable
Bypass (Full Range), High Pass, Band Pass, or Low Pass modes of operation.
Frequency Selection is via a 12 pin Frequency Module (SIP). The amplifier is
shipped with a 90 Hz SIP installed, 13 other frequencies are available from your
Xtant Dealer. Refer to page 7 of this manual for a list of the available frequencies.
N o ise Ga t e: Provides deep muting when no musical signal is present.
Features include adjustable threshold and bypass switch.
Ba l a n c ed / Fl o a t in g In pu t : All “ix” Series amplifiers are supplied
with Balanced / Floating inputs. This circuitry helps to eliminate “system
noise” associated with “ground-loops”.
M o d u l a r Ex pa n sio n Po r t : Xtant amplifiers are supplied with a
modular port used for docking any of Xtant’s signal processing modules.
Pr o t ec t io n Cir c u it r y : Both Thermal and Overcurrent protection has
been incorporated into all Xtant amplifiers. In the event of a problem, the
amplifier will reduce its power to maintain operation.
St a t u s LEDs: Four LEDs, visible through the cover, indicate operational
status of all Xtant amplifiers. The red LED illuminates when the amplifier is
“ON”, the green LED indicates when the noise gate is open, the yellow LED
indicates that overcurrent protection is employed and the orange LED indi-
cates that the thermal protection circuit is operational.
5
Xt a n t 220 0 i x SP ECIFICATIO N S
Frequency Response
5 Hz to 50 kHz +/ – 1 dB
Number of Channels
Watts per Channel @ 4Ω
Watts per Channel @ 2Ω
Bridged Mono @ 4Ω
Recommended Load (Ω)
Distortion (THD)
2
2 x 100
2 x 200
1 x 400
2Ω Stereo / > 4Ω Bridged
< .04%
MEASURED: 20 HZ TO 20 KHZ AT RATED POWER, ALL CHANNELS DRIVEN 4Ω
Signal to Noise Ratio
> 100 dB
MEASURED: A-WEIGHTED IN 20 KHZ NOISE BANDWIDTH @ 1 VOLT SENSITIVITY
Damping Factor
Input Sensitivity
> 200 @ 100 Hz with 4Ω load
100 mV to 8.5 V RMS Unbalanced Source
100 mV to 17 V RMS Balanced Source
Input to Line Output Gain 0 dB +/ – 20 dB, Selectable in 10 dB steps
On-Board Crossover
Module Port(s)
Power Supply
Operational Voltage
Fusing
18 dB per Octave “Butterworth”
1 - Accessory Port
Fully Regulated, “Transitional”
11 to 15 Volts
50 Amp
Warranty
Limited 4 year Parts and Labor
S E E P A G E 11 O F T H I S M A N U A L F O R C O M P L E T E D E T A I L S
6
O N -BO ARD ELECTRO N IC CRO SSO VER
The 22001X features a three-way electronic crossover. The
crossover is tied to a set of inputs and controls the frequency range
of the associated Channels. Independent frequency selection is provided for
both the High and Low Pass sections. A set of selectable RCA line outputs (to
feed additional components) are included with the crossover. In addition, the
crossover features two on-board header jumpers (one for the amplifier and
one for the RCA line outputs) which allows you to select Bypass (Full Range),
High Pass, Low Pass, and/ or Band Pass mode. When chosen, the Band Pass
selection is available via the Low Pass jumper position for the RCA line out-
puts.
The following Frequency Modules (SIPs)* are available from your Xtant
Dealer: 50 Hz, 70 Hz, 80 Hz, 90 Hz, 120 Hz, 150 Hz, 300 Hz, 500 Hz, 700 Hz,
1 kHz, 3 kHz, 4 kHz, and 5 kHz.
Please refer to the Installer’s Reference (insert) for the Frequency Module recep-
tacle(s) location and chart of frequency/ SIP value code numbers
* SIP: an acronym referring to multiple resistors in a Single In-Line Package
7
O P TIO N AL ACCESSO RY M O DULES
Xtant optional accessory modules are easily and quickly
installable by your Authorized Xtant Dealer. The upgrade
modules snap into place on the amplifiers PC board when the top of the unit
is removed. These accessories enhance your entire system, expanding and
customizing performance for your unique applications.
PARAM ETRIC EQ UALIZATIO N M O DULE – PQ M 1
The PQM-1 is a precision tuning instrument, designed to be
adjusted with the use of a Real-Time-Analyzer. This true,
fully adjustable, one band parametric equalizer provides
individual frequency, Q/ bandwidth, and +/ - 18dB gain adjust-
ment controls. By utilizing one of three (3) frequency modules included, any
frequency from 20 Hz to 20kHz can be chosen. The “Q” ranges from 1 to 10
in value, allowing a wide variety of bandwidth adjustment to address the
subtle tuning requirements common to mobile audio systems. All 2-channel
Xtant amplifiers can accept one PQM-1. All 3/ 4-channel amplifiers will
accept two PQM-1 modules if desired (one PQM-1 per 2 channels of input).
24 DB / O CTAVE CRO SSO VER M O DULE – CM 24 X
The CM 24X upgrades the standard on-board crossovers
provided on all Xtant “ix” and “x” Series amplifiers with a
24 dB per octave “Linkwitz - Riley” filter. The CM 24x mod-
ule improves loudspeaker polar response while its steeper
slope provides enhanced system design flexibility.
8
M AIN TEN AN CE
Re c o m m e n d e d Cl e a n in g Pr o c e d u r e s
Cl e a n i n g t h e f a n / Ci r c u i t Bo a r d – Ev e r y 9 0 D a y s
A.
The internal fan in all Xtant amplifiers need periodic cleaning.
If you are in a high dust environment, every 30 days is
recommended. We recommend that your dealer remove
the cover and clean the fan blades with a soft brush. Loose
dust can be removed with a vacuum hose.
Ca u t io n :
Have your dealer check the fan for obstructions if your
amplifier over heats. When the Thermal Protection Circuit
is engaged, the orange LED will be illuminated and power
may be reduced.
B.
Have your dealer check the circuit board for dust. If
present, use a low pressure air source to blow-off the dust
particles. DO NOT use a high-pressure source, brush or
any similar device to clean the circuit board!
Cl e a n in g t h e Am p l if ie r – Ev e r y 30 d a y s
A.
Clean the stainless steel cover with a light dust cloth. For a
more thorough cleaning, use window cleaner that is
ammonia free. Apply the cleaner to the cloth (not the
amplifier) and wipe the surface. Take care not to catch the
cloth on the copper mesh.
Ca u t io n :
B.
Do not allow liquids to touch the circuit board.
To polish the stainless steel cover Xtant recommends the
use of WD 40™. It is important to note that stainless steel
has a (directional) grain. As a rule of thumb, always polish
with the grain. Apply the WD40™ to the cloth (not the
amplifier) and wipe the surface. Take care not to catch
the cloth on the copper mesh.
9
CUSTO M ER RELATIO N S
TECH N ICAL SERVICES
STATEM EN T O F PURPO SE
Our customer’s satisfaction is our purpose. You repre-
sent our present and our future. It is our goal to create
and nurture relationships based upon trust and respect.
This commitment is not taken lightly or just for today; it
is our way of doing business. We believe there is no
other way.
Xtant’s policies and procedures are designed, in the
event of a problem, to minimize the amount of your
“down-time” and inconvenience. It is our commitment
that the product will be at our facility for no more than
four (4) days. Please consider weekends or holidays
(which may fall within the time period) when estimat-
ing the return date of serviced product.
For technical assistance and information regarding
products and/ or installation, please contact Xtant’s
Customer Service Department from 8:00 am to 5:00 pm
MST– Monday thru Friday at:
P h o n e :
Fa x :
U.s.a . t o l l f r ee:
(6 0 2 ) 4 31 8 6 8 6
(60 2) 431 8 60 0
(8 8 8 ) 449 8 268
10
LIMITED U.S.A. WARRANTY
This w arranty gives you specific legal rights, and you may also have other
rights w hich vary from state to state. Xtant Technologies (Xtant) w arrants its
products to be free from defects in materials and w orkmanship under normal
use and service w hen the unit is installed by an Authorized Xtant Dealer as
folow s: electronics (4) four years from original purchase date; speakers/sub-
w oofers (3) three years from original purchase date. Non-Authorized Dealer installed
products carry a one (1) year parts and labor limited w arranty. The extent and conditions of Xtant’s
Limited Warranty are as follow s:
1. Authorized Xtant Dealer Installed Products: Xtant w ill repair at no charge, to the original pur-
chaser, any unit w hich Xtant’s examination discloses to be defective and under w arranty, provided
the defect occurs w ithin the w arranty period and the product is returned immediately to Xtant. This
w arranty is not transferable.
2. Non-Authorized Xtant Dealer Installed Products: Xtant w ill repair at no charge, to the original
purchaser, any unit w hich Xtant’s examination discloses to be defective and under w arranty, pro-
vided the defect occurs w ithin one (1) year from the date of purchase and the product is returned
immediately to Xtant. This w arranty is not transferable.
3. The date of purchase an d proof of Authorized Dealer In stallation of an Xtan t product m ust be
established by an origin al (or copy of the origin al) sales receipt w hich m ust accom pan y the arti-
cle bein g return ed for w arran ty w ork.
4. This w arranty shall NOT apply to any Xtant unit found to have the original factory serial number
removed or defaced. All products received (by Xtant) for in w arranty or out of w arranty repair, w ith
their original serial numbers removed or defaced, w ill NOT be repaired and w ill be returned to
sender, freight collect.
5. The provisions of this w arranty shall not apply to any Xtant unit used for a purpose for w hich it
is not designed, w hich has been repaired or altered in any w ay, or w hich has been connected,
installed, or adjusted other than in accordance w ith the instructions furnished in Xtant’s ow ner’s
manual. Nor shall this w arranty apply to any part w hich has been subject to misuse, neglect, or
accident.
6. Xtant does not authorize any other persons to assume any other liability in connection w ith its
products. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY MADE BY XTANT APPLICABLE
TO ITS PRODUCTS. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE APPLICABLE TO XTANT’S AMPLIFIERS AND OR ACCESSORIES IS LIMITED
IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. XTANT SHALL NOT BE LIABLE
FOR THE INCIDENTAL, CONSEQUENTIAL, OR COMMERCIAL DAMAGES RESULTING FROM THE
BREACH OF THIS WRITTEN WARRANTY. Some states or provinces do not allow the exclusion or
limitation of incidental or consequential damages or limitations on how long an implied w arranty
lasts; so the above limitations or exclusions may not apply to you.
7. Your unit w ill be serviced on an in-w arranty basis w ithin the w arranty period for the correction
of w arranted defects. If improper operation of your Xtant product should occur, contact your
Authorized Xtant Dealer for assistance w ith the return and factory repair of your Xtant product. If
an Authorized Xtant Dealer is not available, please contact Xtan t’s Custom er Service Departm en t
for assistan ce.
ELECTRONICS
SPEAKERS
Xt a n t Te c h n o l o g i e s
7676 South 46th Street
Phoen ix, Arizon a 85040
888-449-8268
Xt a n t Te c h n o l o g i e s
805 Woodm an Ave.
Win slow, Il 61089
800-556-2888
TO RETURN XTANT PRODUCTS OUT OF WARRANTY: Contact Xtant’s Warranty Department at
(602) 431 8686 from 8:00 am to 5:00 pm (MST) for a Return Authorization Number. Return the unit,
postage prepaid, in the original protective carton. Please include a description of the problem and,
if desired, a request for an estimate of repair costs. Unless a request for an estimate is included, the
unit w ill be repaired as necessary. Repaired unit w ill be returned w ith an itemized statement,
C.O.D. certified or Visa/MC. Xtant provides a 90 day w arranty on all repairs serviced as non-w ar-
ranty units.
11
O WN ER’S IN STALLATIO N LO G
Upon installation of your mobile audio sound system, your
Authorized Xtant Select Dealer will complete this log. Keep
this owners manual with your vehicle as a reference for all
amplifier settings.
O WN ERS N AM E:
VEH ICLE: M AKE/ M ODEL:
XTAN T AM PLIFIER SERIAL #
CRO SSO VER SETTIN GS:
YEAR:
JUM PER SETTIN GS:
SIP H IGH PASS
VALUE CODE:
FQ
FQ
AM PLIFIER: (cir cl e set t in g )
ALL
H IGH
LO W
BAN D PASS
SIP LO W PASS
RCA O UTPUTS
VALUE CODE:
ALL
H IGH
LO W
IN PUT SEN SITIVITY JUM PER
OUTPUT GAIN ADJUSTMENT
RIGH T
LEFT
–20 dB
–10 dB
0 dB
+10 dB
+20 dB
(DRAW ARRO W PO SITIO N )
ACCESSO RY M O DULES
N O ISE GATE ADJUSTM EN T
SWITCH :
THRESHOLD POSITION
O N
O FF
CM 24X
PQ M -1
YES
YES
N O
N O
PQ M -1 CH IP FREQ UEN CY
(DRAW ARRO W PO SITIO N )
XTAN T SELECT DEALER:
PH O N E:
IN STALLATIO N SPECIALIST:
DATE IN STALLED:
12
|