Sylvania DVD Player DVL100D User Manual

OWNER’S  
MANUAL  
DVD PLAYER  
DVL100D  
:
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE.  
The lightning flash with arrowhead symbol, within  
CAUTION  
an equilateral triangle, is intended to alert the  
user to the presence of uninsulated dangerous  
RISK OF ELECTRIC SHOCK  
voltagewithin the products enclosure that may  
DO NOT OPEN  
be of sufficient magnitude to constitute a risk of  
electric shock to persons.  
:
CAUTION  
The exclamation point within an equilateral trian-  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
gle is intended to alert the user to the presence of  
important operating and maintenance (servicing)  
instructions in the literature accompanying the  
appliance.  
IMPORTANT SAFEGUARDS  
1) Read Instructions - All the safety and operating instructions  
should be read before the product is operated.  
or against them, paying particular attention to cords at plugs, conve-  
nience receptacles, and the point where they exit from the product.  
14)Lightning - For added protection for this product during a light-  
ning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect  
the antenna or cable system. This will prevent damage to the  
product due to lightning and power-line surges.  
15)Power lines - An outside antenna system should not be locat-  
ed in the vicinity of overhead power lines or other electric light  
or power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system, extreme  
care should be taken to keep from touching such power lines  
or circuits as contact with them might be fatal.  
2) Retain Instructions - The safety and operating instructions  
should be retained for future reference.  
3) Heed Warnings - All warnings on the product and in the oper-  
ating instructions should be adhered to.  
4) Follow Instructions - All operating and use instructions should  
be followed.  
5) Cleaning - Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
6) Attachments - Do not use attachments not recommended by  
the product manufacturer as they may cause hazards.  
7) Water and Moisture - Do not use this product near water - for  
example, near a bath tub, wash bowl, kitchen sink, or laundry  
tub; in a wet basement; or near a swimming pool; and the like.  
8) Accessories - Do not place this product on an unstable cart,  
stand, tripod, bracket, or table. The product may fall, causing  
serious injury to a child or adult, and serious damage to the  
product. Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the product.  
Any mounting of the product should follow the manufacturer’s  
instructions, and should use a mounting accessory recom-  
16)Overloading - Do not overload wall outlets, extension cords, or  
integral convenience receptacles as this can result in a risk of  
fire or electric shock.  
17)Object and Liquid Entry - Never push objects of any kind into  
this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
18)Servicing - Do not attempt to service this product yourself as  
opening or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service personnel.  
19)Damage Requiring Service - Unplug this product from the wall  
outlet and refer servicing to qualified service personnel under  
the following conditions:  
mended by the manufacturer.  
9) A product and cart combination should be  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
moved with care. Quick stops, excessive  
force, and uneven surfaces may cause the  
product and cart combination to overturn.  
10)Ventilation - Slots and openings in the cabi-  
net are provided for ventilation and to  
ensure reliable operation of the product and  
to protect it from overheating, and these  
a) When the power-supply cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper adjust-  
ment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore  
the product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance  
- this indicates a need for service.  
S3125A  
openings must not be blocked or covered.  
The openings should never be blocked by placing the product  
on a bed, sofa, rug, or other similar surface. This product  
should not be placed in a built-in installation such as a book-  
case or rack unless proper ventilation is provided or the manu-  
facturer's instructions have been adhered to.  
11)Power Sources - This product should be operated only from the type  
of power source indicated on the marking label. If you are not sure  
of the type of power supply to your home, consult your product deal-  
er or local power company. For products intended to operate from  
battery power, or other sources, refer to the operating instructions.  
12)Grounding or Polarization - This product may be equipped with  
a polarized alternating-current line plug (a plug having one blade  
wider than the other). This plug will fit into the power outlet only  
one way. This is a safety feature. If you are unable to insert the  
plug fully into the outlet, try reversing the plug. If the plug should  
still fail to fit, contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the polarized plug.  
13)Power-Cord Protection - Power-supply cords should be routed so that  
they are not likely to be walked on or pinched by items placed upon  
20)Replacement Parts - When replacement parts are required, be  
sure the service technician has used replacement parts speci-  
fied by the manufacturer or have the same characteristics as  
the original part. Unauthorized substitutions may result in fire,  
electric shock, or other hazards.  
21)Safety Check - Upon completion of any service or repairs to this  
product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
22)Heat - The product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
If you need additional assistance for set-up or operating  
after reading owner’s manual, please call  
-
-
TOLL FREE : 1 800 968-3429  
Please read before using this equipment.  
 
TABLE OF CONTENTS  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 10  
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 10  
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 10  
REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
REPEAT A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . 11  
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Programmed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Changing the On-Screen Display . . . . . . . . . . . . . . . . . 12  
Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
PARENTAL LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . 13  
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 13  
CONTROL LEVELS. . . . . . . . . . . . . . . . . . . . . . . . . 13  
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 13  
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 4  
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 6  
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
REAR VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . . 7  
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
HOOK UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Connecting to a TV using a VIDEO OUT Jack  
or a S-VIDEO OUT Jack . . . . . . . . . . . . . . . . . . . . . . . . 7  
Connecting to an Amplifier Equipped with Digital Input  
Jacks such as MD deck or DAT deck . . . . . . . . . . . . . . . 8  
Connecting to a Dolby Digital decoder . . . . . . . . . . . . . . 8  
Connecting to a TV or a Stereo TV that has Component  
VIDEO In Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
CALLING UP A MENU SCREEN DURING  
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 15  
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
INDICE  
CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 17  
PANEL DELANTERO / VISTA TRASERA . . . . . . . . . 17  
MANDO A DISTANCIA. . . . . . . . . . . . . . . . . . . . . . . 17  
Visualización . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Visualizaciones Durante la Operación . . . . . . . . . . . . . 18  
Instalación de las Pilas . . . . . . . . . . . . . . . . . . . . . . . . 18  
Conexión a un Descodificador Dolby Digital . . . . . . . . . 18  
Conexión a un Televisor o a un Televisor Estéreo Que  
tenga tomas Component Video in . . . . . . . . . . . . . . . . 18  
REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 19  
Reproducción de un DVD de Vídeo o un CD de Audio . 19  
CONEXIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Conexión a un Televisor. . . . . . . . . . . . . . . . . . . . . . . . 18  
Conexión a un Amplificador Equipado con tomas de  
Entrada Digital, Platina MD o Platina DAT . . . . . . . . . . 18  
EN  
3
 
INTRODUCTION  
Supplied Accessories  
Symbols Used in this Manual  
Remote control  
Two AA batteries  
Owners Manual  
VIDEO/AUDIO cables  
RETURN STOP SHEET  
The following symbols appear below in some headings and  
notes in this manual, with the following meanings!  
DVD-V  
: Description refers to playback of DVD video discs.  
CD  
Manufactured under license from Dolby Laboratories.  
Dolbyand the double-D symbol are trademarks of  
Dolby Laboratories.  
: Description refers to playback of audio CDs.  
MP3  
: Description refers to playback of MP3 discs.  
QUICK  
: Description refers to the items to be set in the QUICK  
mode.  
ABOUT THE DISCS  
Playable Discs  
The following discs can be played back on this DVD player.  
¡
¡
¡
¡
¡
¡
DVD video  
DVD+R/RW*  
CD-R/RW*  
DVD-R/RW*  
Audio CD  
MP3*  
*Depending on the types or the writing method of the medium some discs can not be played.  
Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs made on personal computers, or on DVD recorders may not be played  
back properly due to the factors such as scratches, dirt or special properties of the disc.  
Discs made on personal computers may not be played back properly due to the different environment or the settings of the  
application you use. We recommend always to use the standardized, rightly formatted discs. (Please contact the sales  
agency for more detail).  
This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as PAL or SECAM.  
Some discs include region codes as shown below.  
1
The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be  
played back on DVD player with the same region code.  
For Customer Use:  
Read carefully the information located at the bottom of your DVD player and enter below the Serial No.Retain this informa-  
tion for future reference.  
Model No. DVD player  
Serial No. __________________________  
The following discs cannot be played back on this DVD player.  
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
DVD with region codes other than 1 or ALL.  
DVD-ROM  
DVD-RAM (Never play back, otherwise malfunction may result.)  
CD-ROM  
VSD  
CDV (Only plays back the audio part.)  
CD-G (Only plays back the sound.)  
CD-I (Never play back, otherwise malfunction may result.)  
SACD  
Photo CD (Never play back, otherwise malfunction may result.)  
Video CD (Never play back, otherwise malfunction may result.)  
Any other discs without compatibility indications.  
EN  
4
 
ABOUT THE DISCS  
Disc Types  
[DVD]  
[MP3]  
Data on a DVD is divided into sections called "titles", and then  
into subsections called "chapters", each of which is given a title  
or chapter number. Playback conditions are preset on some  
DVD video discs, and these playback conditions take priority  
over user operations on this player. If a function you selected do  
not run as desired, refer to the manual accompanying the disc.  
Data on a MP3 is divided into sections called "groups", and  
then into subsections called "tracks", each of which is given  
a group or track number.  
Example  
Group 1  
Group 2  
Example  
Track 1  
Track 2  
Track 3  
Track 4  
Track 1  
Track 2  
Title 1  
Title 2  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2  
[Audio CD]  
Data on an audio CD is divided into sections called tracks,  
each of which is given a track number.  
Example  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
Track 6  
FEATURES  
Information about the current operation can be displayed  
on a TV screen, allowing you to confirm the currently  
active functions (such as program playback), on the TV  
screen using the remote control.  
¡Dolby Digital sound  
This player can handle Dolby Digital surround sound hav-  
ing 5.1 channels when connected to a Dolby Digital  
decoder.  
¡Search  
¡Still/fast/slow/step playback  
Chapter search / Title search / Track search / Time search  
¡Repeat  
Chapter / Title / Track / Group / All / A-B  
¡Random playback for audio CD and MP3  
¡Program playback for audio CD and MP3  
¡DVD menus in a desired language  
¡Screen saver/Auto power-off functions  
The screen saver program starts when there is no input from  
the player for five minutes in the stop mode. When the  
screen saver program is activated for 30 minutes, the power  
is automatically turned off.  
¡Zoom  
¡Marker  
The part designated by user can be called back.  
¡Resume Play  
¡Virtual Surround  
¡Subtitles in a desired language  
¡Selecting a camera angle  
¡Choices for audio language and sound mode  
¡Parental lock  
¡Automatic detection of discs  
This player automatically detects if a loaded disc is DVD,  
audio CD or MP3 on disc.  
¡Playing an MP3 disc  
¡Direct Search  
¡Component Video Out Jacks  
Jacks located on the back of the DVD Player which are  
used to send high-quality video to a TV via Component  
Video In Jacks.  
¡Dimmer  
¡Bit rate indication  
¡DRC (Dynamic range control)  
You can control the range of sound volume.  
¡Black Level Setting  
¡On-screen display  
EN  
5
 
FUNCTIONAL OVERVIEW  
FRONT PANEL  
2
3
4
5
[Fig. 1]  
[Fig. 2]  
9
8
7
6
1
REAR VIEW  
AUDIO OUT  
L
Y
Cr  
COMPONENT  
VIDEO OUT  
DIGITAL AUDIO OUT  
BITSTREAM  
PCM  
/
S-VIDEO OUT  
VIDEO  
OUT  
COAXIAL  
R
Cb  
12 14  
11 13  
15  
10  
1. POWER  
to switch the player to ON or OFF  
2. Disc tray  
10. MAIN (AC Power Cord)  
connect to a standard AC outlet  
11. COAXIAL (Digital audio out)  
3. OPEN/CLOSE  
to open/close the disc tray  
4. PLAY  
connect to AUDIO inputs of a digital (coaxial) audio  
equipment  
12. AUDIO OUT (Left/Right)  
connect to AUDIO inputs of an amplifier, receiver or  
stereo system  
to start or resume disc playback  
5. STOP  
to stop playback  
6. SKIP G / SEARCH  
13. VIDEO OUT  
g
connect to the Video Input of a TV.  
goes to next chapter or track during playback; press and 14. COMPONENT VIDEO OUT  
hold for 1.5 seconds for a forward search  
7. SKIP H / SEARCH  
connect to a TV with Component video in jacks.  
h
15. S-VIDEO OUT  
goes to previous chapter or track during playback; press  
and hold for 1.5 seconds for a reverse search  
connect to a TV with S-Video inputs  
Caution: Do not touch the inner pins of the jacks on the  
rear panel. Electrostatic discharge may cause permanent  
damage to the player.  
8. PAUSE  
to pause the current disc operation  
9. Display  
9. PAUSE  
REMOTE CONTROL  
pause playback temporarily / frame-by-frame playback  
10. REVh  
1
25  
24  
to view DVD picture in fast reverse motion  
11. PLAY  
SEARCH  
MODE  
OPEN/  
CLOSE  
POWER DISPLAY  
2
3
4
5
6
AUDIO  
to start a DVD disc playback  
12. SETUP  
1
2
5
8
0
3
6
SUB  
TITLE  
4
to access or remove the DVD setup menu  
13. MODE  
ANGLE  
23  
7
9
REPEAT  
A-B  
CLEAR  
+10  
to set up programmed or random playback (Audio CD)  
to set the black level and virtual surround during DVD  
playback  
PAUSE  
SKIP  
7
8
22  
21  
20  
19  
PLAY  
9
REV  
FWD  
14. ZOOM  
10  
11  
12  
13  
14  
STOP  
enlarge DVD video image  
15. TITLE  
SETUP  
MODE  
ZOOM  
TITLE  
MENU  
to display title menu of a disc  
16. ENTER  
ENTER  
18  
17  
16  
RETURN  
acknowledge menu selection  
17. RETURN  
[Fig. 3]  
15  
1. DISPLAY  
to return previous or remove setup menu  
to access or remove the display screen during DVD or  
Audio CD playback  
18. Arrow (s  
B
K
L)  
(left/right/up/down) select an item in the menu  
19. MENU  
to display the menu of the DVD disc  
20. STOP  
to stop a DVD disc playback  
21. FWDg  
to view DVD picture in fast forward motion  
22. SKIP H,G  
2. POWER  
switch DVD player ON or OFF  
3. AUDIO  
to choose audio languages or sound modes  
4. SUBTITLE  
subtitle language DVD selector  
5. ANGLE  
select DVD camera angle  
6. REPEAT  
to skip chapter/tracks  
23. 0-9 numerical buttons  
select numbered items in a menu  
+10  
repeat chapter, track, title, all.  
7. REPEAT A-B  
repeat a specific segment  
8. CLEAR  
use this button to enter number 10 and above  
24. OPEN/CLOSE  
to reset the setting  
to open/close the disc tray  
25. SEARCH MODE  
to locate a desired point  
EN  
6 –  
 
FUNCTIONAL OVERVIEW  
Display  
Stays on when repeat chapter function is on.  
Stays on when repeat track function is on.  
Stays on when repeat  
title function is on.  
Stays on when  
Lights up when a DVD  
is inserted on the tray.  
the repeat function is on.  
Stays on when  
the A-B repeat  
function is on.  
Lights up when a CD is  
inserted on the tray.  
Stays on when the inserted  
disc is being played back.  
Displays how long a current title or track has been  
played back. When a chapter or track has switched,  
the number of a new title, chapter or track is displayed.  
Lights up when the  
inserted disc comes  
to a pause.  
[Fig. 4]  
Displays During Operation  
Loading the Batteries  
1. Open the battery compartment cover.  
Power on  
No disc inserted or  
playing DVD Menu  
2. Insert two AA batteries, with each one  
oriented correctly.  
Tray open  
Tray closed  
3. Close the cover.  
Loading the Disc  
Power off  
NOTES  
Do not mix alkaline and manganese batteries.  
Do not mix old and new batteries.  
HOOK UPS  
CAUTION:  
Be sure to turn off the Player and equipment to be connected before connecting.  
Read through the operation manual for the equipment to be connected.  
Be sure that the colors of the jacks and plugs match up when using VIDEO/AUDIO cables.  
Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it  
may cause electrical interference when you are watching television programs.  
Connecting to a TV using a VIDEO OUT Jack or a S-VIDEO OUT Jack  
Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures at higher quality.  
AUDIO OUT  
L
Y
Cr  
COMPONENT  
VIDEO OUT  
To Right (red) and  
Left (white)  
DIGITAL AUD
PCM / BITSM  
AUDIO OUT jacks  
A/V-compatible or  
wide screen TV  
S-VIDEO OUT  
COAXIAL  
R
VIDEO Cb  
OUT  
To Right (red) and Left (white)  
AUDIO INPUT jacks  
To VIDEO INPUT jack  
or  
To VIDEO OUT jack  
[Fig. 5]  
To S-VIDEO INPUT jack  
To S-VIDEO OUT jack  
AUDIO OUT  
L
Y
Cr  
COMPONENT  
VIDEO OUT  
To Right (red) and  
Left (white) AUDIO  
OUT jacks  
DIGITAL AT  
Stereo system  
PCM  
/
BITSM  
S-VIDEO OUT  
COAXIAL  
R
VIDEO Cb  
OUT  
A/V-compatible  
To S-VIDEO  
OUT jack  
To S-VIDEO  
INPUT jack  
or  
wide screen TV  
or  
To Right (red) and Left (white)  
ANALOG AUDIO INPUT jacks  
To VIDEO OUT jack  
To VIDEO INPUT jack  
[Fig. 6]  
EN  
7
 
HOOK UPS  
NOTES:  
Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the  
copy protection system.  
Be sure to turn off the power to all components in the system before connecting another component.  
Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player.  
Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck  
Use an audio coaxial digital cables (not included) for the audio connections. Connecting to an amplifier equipped with digital  
input jacks such as MD Deck or Dat Deck.  
AUDIO OUT  
L
Y
Cr  
COMPONENT  
VIDEO OUT  
DIGITAL AUDIO OUT  
PCM  
/
BITSTREAM  
Amplifier equipped with digital  
input jacks, MD deck,  
DAT deck, etc.  
S-VIDEO OUT  
COAXIAL  
R
VIDEO Cb  
OUT  
A/V-compatible  
or  
wide screen TV  
To COAXIAL DIGITAL  
AUDIO OUT jack  
To S-VIDEO  
OUT jack  
To S-VIDEO  
INPUT jack  
or  
To COAXIAL DIGITAL  
AUDIO INPUT jack  
To VIDEO OUT jack  
To VIDEO INPUT jack  
[Fig. 7]  
NOTES:  
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD  
or DAT deck.  
Set Dolby Digital to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise dis-  
tortion, and may also damage the speakers.(See page 13 to set ON for Dolby Digital)  
Connecting to a Dolby Digital decoder  
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital  
data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy  
a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can  
be heard in movie theaters.  
Use an audio coaxial digital cables (not included) for the audio connections.  
Front  
speaker  
(left)  
Front  
speaker  
(right)  
Center speaker  
AUDIO OUT  
L
Y
Cr  
COMPONENT  
VIDEO OUT  
DIGITAL AUDIO OUT  
PCM  
/
BITSTREAM  
S-VIDEO OUT  
COAXIAL  
R
VIDEO Cb  
OUT  
A/V-compatible  
or  
wide screen TV  
Dolby Digital  
decoder  
To COAXIAL DIGITAL  
AUDIO INPUT jack  
To S-VIDEO  
OUT jack  
To S-VIDEO  
INPUT jack  
To COAXIAL  
DIGITAL AUDIO  
OUT jack  
or  
To VIDEO OUT jack  
To VIDEO INPUT jack  
[Fig. 8]  
Surround  
speaker  
(right)  
Surround  
speaker  
(left)  
Subwoofer  
NOTES:  
If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup mode.  
Unless connected to a Dolby Digital decoder, set Dolby Digital to off for audio output in the setup mode. Playing a DVD  
using incorrect settings may generate noise distortion, and may also damage the speakers.  
Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks  
AUDIO OUT  
L
Y
Cr  
COMPONENT  
VIDEO OUT  
To Right (red) and  
Left (white)  
AUDIO OUT jacks  
DIGITAL AUT  
PCM  
/
BITSM  
To COMPONENT  
VIDEO OUT jack  
S-VIDEO OUT  
A/V-compatible  
or  
wide screen TV  
COAXIAL  
R
VIDEO Cb  
OUT  
Stereo system  
To Right (red) and Left (white)  
ANALOG AUDIO INPUT jacks  
To COMPONENT  
VIDEO INPUT jack  
[Fig. 9]  
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS  
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TVs 75-ohm coaxi-  
al antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD  
player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked  
TO TV) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.  
If your TVs 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your  
TVs antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked ANT IN), then con-  
nect the RF modulator to your TVs antenna terminal as described above.  
NOTE  
The picture quality from DVD discs will not be as good if the DVD player is connected to the TVs antenna terminal through an RF Modulator.  
EN  
8
 
PLAYING A DISC  
Basic Playback  
Disc Menus  
DVD-V CD  
DVD-V  
1
2
3
Press MENU.  
Getting started  
Turn on the power of the TV, amplifier and any other com-  
The DVD main menu will appear.  
If the feature is not available,  
appear on the TV screen.  
If disc menu is available on the disc, audio lan-  
guage, subtitle options, chapters for the title and  
other options will appear for selection.  
ponents which are connected to the DVD.  
Make sure the TV and audio receiver (commercially avail-  
able) are set to the correct channel.  
Press POWER.  
• “P-ONwill appear briefly on the display panel.  
Press OPEN/CLOSE to open disc  
loading tray.  
Place the chosen disc in the tray,  
with the label facing up.  
symbol may  
1
2
3
4
4
Press Arrow ( L / K / B / s ) to select an item, and  
ENTER to confirm selection.  
Press PLAY.  
Title Menu  
The tray will close automatically, and  
playback will then start from the first chapter or track of  
the disc. If the playback does not start automatically,  
press PLAY.  
DVD-V  
1
2
3
Press TITLE.  
The title menu will appear.  
If the feature is not available,  
appear on the TV screen.  
Press Arrow ( L / K / B / s ) to select an item, and  
ENTER to confirm selection.  
Playback will begin at the selected Title.  
When you playback the DVD which a title menu is  
recorded, it may appear on the screen. In this case,  
refer to TITLE MENU.  
Press STOP to stop playback.  
symbol may  
5
NOTES:  
A prohibited iconmay appear at the top-  
right on the TV screen during operation,  
warning that a prohibited operation has  
been encountered by the DVD player or  
the disc.  
CALLING UP A MENU SCREEN DURING PLAYBACK  
With DVDs that use some titles for playback program  
signals, playback may start from the second title, or it  
may skip these titles.  
During the playback of two layered disc, pictures may  
stop for a moment. This happens when the 1st layer  
switches to the 2nd layer. This is not a malfunction.  
DVD-V  
Press MENU to call up the DVD main menu.  
Press TITLE to call up the title menu.  
NOTE:  
Contents of menus and corresponding menu opera-  
tions may vary between discs. Refer to the manual  
accompanying the disc for details.  
General Features  
DVD may contain menus to navigate the disc and access  
special features. Press the appropriate numerical key or use  
Arrow ( L / K / B / s ) to highlight your selection in the DVD  
main menu and press ENTER to confirm.  
Step by Step Playback  
DVD-V  
NOTE:  
1
2
3
During playback, press PAUSE.  
Unless stated, all operations described are based on  
remote control use. Some operations can be carried  
out using the menu bar on the TV screen.  
Playback will pause and sound will be muted.  
The disc goes forward by one frame each time  
PAUSE is pressed.  
To exit step by step playback, press PLAY.  
Pause  
Resume  
DVD-V CD  
1
2
During playback, press PAUSE.  
Playback will pause and sound will be muted.  
To continue playback, press PLAY.  
DVD-V CD  
1
2
During playback, press STOP.  
Resume message will appear on the TV screen.  
Press PLAY, playback will resume from the point  
at which playback was stopped.  
To cancel resume, press STOP twice.  
EN  
9
 
PLAYING A DISC  
Fast Forward / Reverse Search  
DVD-V CD  
During playback, press FWDg or REVh repeated-  
ly to select the required forward or reverse speed: x2, x8,  
2
Within 30 seconds, select a desired track number using  
numerical buttons. For single digits press 0first.  
Playback will start at the selected track.  
MP3  
1
2
Using the SKIP  
H G  
SKIP  
x50, x100.  
During playback, press  
G to move to the next track.  
If you are using SKIP G / SEARCH g on the front  
panel, press and hold it for more than 1.5 sec (the  
longer you hold it, the faster the speed will be). When  
you reach the desired speed, release the button.  
For audio CDs, the speed is fixed at x16.  
For MP3, the speed is fixed at x8.  
Press it repeatedly to skip subsequent tracks. Press  
H
SKIP  
to go back to the beginning of the current track. Press it repeat-  
edly to go to the previous tracks  
Track number will appear briefly on the DVD display panel.  
.
If SKIP is pressed while the playback is paused, the  
playback will be paused again after skipping to the next  
track.  
To return to normal playback, press PLAY.  
NOTE:  
SKIP  
H
G are not available when playback is stopped.  
Title / Chapter Search  
Slow Forward / Slow Reverse  
DVD-V  
DVD-V  
1
2
1
2
During playback, press PAUSE.  
Press SEARCH MODE once for the Chapter search,  
twice for the Title search during playback.  
Press FWDg or REVh .  
Slow motion playback will begin and sound will be muted.  
3
Press FWDg or REVh repeatedly to select  
the required speed: 1/16, 1/8, 1/2 of the normal  
/2  
playback.  
If you are using SKIP H / SEARCH h on the front  
panel, press and hold it for more than 1.5 sec (the  
longer you hold it, the slower the speed will be). When  
you reach the desired speed, release the button.  
Enter the desired chapter/title number using  
numerical buttons.  
4
To return to normal playback, press PLAY.  
Zoom  
Time Search  
DVD-V  
DVD-V CD  
The Zoom function allows you to enlarge the video image  
1
2
3
During playback, press SEARCH MODE three times  
(CD: twice) to display the Time Search on the TV  
screen.  
Within 30 seconds, enter a desired disc time using  
numerical buttons.  
Playback will start at the specified time.  
Press CLEAR to erase the incorrect input.  
and to pan through the enlarged image.  
1
2
3
4
Press ZOOM during playback.  
Playback will continue.  
Press ZOOM repeatedly to select the required  
zoom factor: x2, x4 or OFF.  
Use Arrow ( L / K / B / s ) to move the zoomed  
picture across the screen.  
To exit zoom mode, press ZOOM to OFF.  
Repeat  
NOTES:  
Zooming function does not work while disc menu is  
REPEAT are available only during playback.  
shown.  
x4 zoom is not available on some discs.  
REPEAT TITLE / CHAPTER  
DVD-V  
Track  
To activate the repeat function, press REPEAT during playback.  
CD  
The repeat mode changes as described below every time  
you press the button.  
There are three ways to begin playback on an Audio CD at a  
specific Track.  
Using the Numerical buttons  
CHAPTER  
(current chapter repeat) (current title repeat)  
TITLE  
OFF  
(repeat off)  
1
Press numerical buttons to enter the desired  
Track number.  
Playback will start at the selected track.  
For single digit tracks (1-9), press a single number (eg.  
track 3, press 3).  
NOTES:  
Repeat Title/Chapter is not available with some scenes.  
The REPEAT setting will be cleared when moving to  
other title or chapter.  
To play track 26, press +10, 2, 6 on the numerical button.  
Using the SEARCH MODE  
1
Press SEARCH MODE.  
The track search display appears.  
EN  
Download from Www.Somanuals.co1m0. All Manuals Search And Download.  
PLAYING A DISC  
REPEAT TRACK  
Random Playback  
CD  
CD  
To activate the repeat function, press REPEAT during playback.  
This shuffles the playing order of tracks instead of playback  
in the sequence.  
The repeat mode changes as described below every time  
you press the button.  
1
2
In stop mode, press  
MODE twice.  
RANDOM  
CD [AUDIO]  
Total 00:45:55  
TRACK  
ALL  
OFF  
RANDOM screen appears.  
RANDOM PROGRAM  
no indication  
(repeat off)  
(current track repeat)  
(entire disc repeat)  
Press PLAY to start ran-  
dom playback.  
PLAY  
NOTES:  
NOTES:  
If you like to repeat the cur-  
rent track in the random  
selection, press REPEAT repeatedly until  
The REPEAT setting will be cleared when moving to other track.  
Repeat playback does not function during repeat A-B playback.  
TRACK  
appears during playback. If you like to repeat the entire ran-  
dom selection press REPEAT repeatedly until  
ALL  
REPEAT A-B  
appears during playback.  
DVD-V CD  
MP3 Playback  
1
2
Press REPEAT A-B at your chosen starting point.  
A- appears briefly on the TV screen.  
Press REPEAT A-B again at your chosen end point.  
A-B appears briefly on the TV screen, and the repeat  
sequence begins.  
To exit the sequence, press REPEAT A-B.  
MP3  
When a CD with MP3 files is inserted in the DVD player, the  
MP3 menu will appear on the TV screen, and number of  
tracks is displayed on the front panel.  
1
In stop mode, press K or L to select the desired  
3
group or track.  
If a group is selected, press  
the track selection  
B
or ENTER to go on to  
NOTES:  
The repeat A-B section can only be set within the current  
screen. Press K or L to  
choose a track, then  
press PLAY or ENTER.  
If a track is selected,  
press PLAY or ENTER to  
start playing tracks.  
Starting from the one  
youve just chosen the  
subsequent tracks will be  
played.  
title (for DVDs), or current track (for audio CDs).  
Repeat A-B is not available with some scenes in DVD.  
To cancel the A point which was set, press CLEAR.  
Repeat A-B playback does not function during title, chap-  
ter, track or all repeat playback.  
FILE LIST  
DISC NAME  
FIRST PLAY  
FOLDER  
MP3  
folder name  
folder name  
folder name  
folder name  
folder name  
folder name  
ENTER  
PLAY  
1/2  
FIRST PLAY  
Program  
CD  
Choose FIRST PLAY to start playback from the begin-  
You may determine the order in which tracks will play.  
1
ning of the listed tracks.  
Press TITLE to return to the first item.  
Press STOP to stop playback.  
In stop mode press MODE.  
2
The PROGRAM screen  
will appear.  
Press L or M to select a  
track, then press ENTER.  
Press CLEAR to erase  
the The most recently  
entered program.  
PROGRAM  
CD [AUDIO]  
NOTES:  
Total 00:45:55  
3:30  
2
Folders are known as Groups; files are known as Tracks.  
1
1
3:30  
2
3
4
5
6
7
4:30  
5:00  
3:10  
5:10  
1:30  
2:30  
3
MP3 files are accompanied by  
icon.  
Maximum of 255 folders can be recognized.  
Maximum of 256 files can be recognized.  
Up to 8 hierarchies can be created.  
ENTER  
1/2  
1/1  
PLAY  
1
3:30  
CLEAR  
3
Press PLAY to play the  
programmed tracks.  
This player recommends the use of files recorded at the below spec-  
ifications  
:
NOTES:  
Sampling frequency: 44.1kHz or 48kHz  
Constant bit rate: 112kbps ~ 320kbps.  
While the program is being played back, the STOP works as follows.  
Press STOP once and then PLAY again, playback will restart  
from the point where STOP was pressed. (Program continued)  
Press STOP twice and then PLAY again, playback will restart  
from the track in the usual way. (Program cleared)  
On-Screen Information  
MP3  
Up to 99 programs can be entered.  
If you like to repeat the current track in the program, press  
You can check the MP3 files during playback.  
REPEAT repeatedly until  
back. If you like to repeat the entire program press  
REPEAT repeatedly until ALL appears during playback.  
TRACK appears during play-  
1
Press DISPLAY.  
The name of the file currently in play will be displayed.  
Press DISPLAY again to show the track number,  
the elapsed time, the repeat status, and the play-  
back status at the top of the screen.  
2
will be displayed when the repeat play has been  
selected.  
T - indicates Track repeat  
G- indicates Group (folder) repeat  
A - indicates Disc repeat  
Press DISPLAY again to exit.  
3
EN  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
PLAYING A DISC  
Track Selection  
Subtitle Language  
MP3  
DVD-V  
The DVD player allows you to select a language for subtitle  
1
2
Press SEARCH MODE during playback.  
The FILE LIST will appear.  
Select a desired track using Arrow (L/K/B/s).  
during DVD disc (if available) playback.  
1
2
Press SUBTITLE during playback.  
Press SUBTITLE repeatedly to select your desired  
subtitle language.  
Press  
Press  
B
s
when you want to go to the next hierarchy.  
when you want to go back to the previous  
The selected language will be displayed on the display  
hierarchy.  
Press PLAY to start playing  
bar at the top of the screen.  
3
3
To turn off subtitles, press SUBTITLE repeatedly  
until OFF appears.  
NOTES:  
Press SEARCH MODE to EXIT.  
Some selections may take a while to be recognized.  
NOTES:  
Pressing AUDIO may not work on some DVDs with multiple  
audio languages (e.g. DVDs which allow audio language set-  
ting on the disc menu).  
Some discs allow audio language setting/subtitle language  
setting on the disc menu. (Operation varies between discs,  
so refer to the manual accompanying the disc.)  
Random Playback  
If the desired language is not shown after pressing SUBTITLE  
several times, the disc does not have subtitles in that language.  
If you choose a Language that has a 3 letter language  
code, the code will be displayed every time you change the  
Subtitle language setting. If you choose any other lan-  
guages, ---will be displayed instead. (Refer to page 14.)  
MP3  
1
2
Press MODE twice while playback is stopped.  
Press PLAY to play the tracks in random order.  
Program  
Camera Angle  
MP3  
DVD-V  
This feature allows you to program a mp3 disc to play in a  
Some DVD discs contain scenes which have been shot simulta-  
neously from various angles. You can change the camera angle  
desired sequence.  
1
2
Press MODE during playback is stopped.  
The PROGRAM screen will appear.  
Press K or L to select a track, then press ENTER,  
to save it in a program.  
when the (  
) icon appears on the screen.  
1
Press ANGLE during playback.  
The selected angle will be displayed on the display bar  
at the top of the screen.  
Press CLEAR to erase the incorrect input.  
Press PLAY to start programmed playback.  
2
Press ANGLE repeatedly to select your desired angle  
.
3
Changing the On-Screen Display  
Audio Language  
DVD-V  
You can check information about the current disc by pressing  
DVD-V  
DISPLAY on the remote control.  
1
Press DISPLAY during play-  
back to show current Chapter  
The elapsed and remaining  
The DVD player allows you to select a language during DVD  
9/49  
0:00:00 -0:00:00  
disc (if multi language available) playback.  
1
2
.
Press AUDIO during playback.  
Press AUDIO repeatedly to select your desired  
language.  
playing time of the current chapter will be displayed.  
Press DISPLAY again to show current Title.  
The elapsed and remaining playing time of the current  
title will be displayed.  
Press DISPLAY the third time.  
2
3
Stereo Sound Mode  
The BIT RATE and the current repeat setting will be  
displayed.  
CD  
1
Press AUDIO repeatedly during playback to select  
If you are playing a dual layered disc, the layer number  
will also be displayed ( L0: Layer 0 is playing. L1: Layer  
1 is playing).  
between STEREO, L-CH or R-CH.  
STEREO - both right and left channels are active (stereo)  
L-CH - only left channel is active  
R-CH - only right channel is active  
4
1
Press DISPLAY the fourth time to remove the display.  
CD  
Press DISPLAY during playback, the current Track  
will be displayed on the TV screen.  
The elapsed and remaining playing time of the current  
NOTE:  
If the Virtual Surround setting is ON, the sound mode will  
be fixed to STEREO, and can not be changed.  
track will be displayed.  
Press DISPLAY again to show current Total Track.  
The elapsed and remaining playing time of the current  
total track will be displayed.  
Press DISPLAY the third time to remove the display.  
2
3
EN  
Download from Www.Somanuals.co1m2. All Manuals Search And Download.  
PLAYING A DISC  
Parental Control  
CONTROL LEVELS  
ALL  
All parental lock is cancelled.  
Level 8  
DVD-V  
Parental Control limits the disc viewing that exceed your set-  
tings. (with a password or playback will stop.)  
This feature allows you to prevent discs with alternative  
scenes from being played by your children.  
DVD software of any grade (adult/general/children) can  
be played back.  
Levels 7 to 2  
Only DVD software intended for general use and chil-  
dren can be played back.  
PARENTAL LEVEL  
Level 1  
Only DVD software intended for children can be played back,  
with those intended for adult and general use prohibited.  
Parental Level allows you to set the rating level of your DVD discs.  
Playback will stop if the discs ratings exceed the level you set.  
1
2
3
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press ENTER.  
Press s or B to select  
Marker Setup Screen  
DVD-V CD  
PARENTAL, then press ENTER.  
PARENTAL  
Enter your four-digit password  
PARENTAL LEVEL ALL  
4
5
Use markers to memorise your favourite places on a disc.  
then press ENTER.  
1
Press SEARCH MODE four times (CD: three times)  
Press K or L to select  
during playback.  
PARENTAL LEVEL, then press ENTER.  
Press K or L to select the desired level.  
Press SETUP to exit.  
6
7
The display screen and Markers will appear on the TV screen.  
2
3
Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10  
and ensure that - : - - : - -appears in the display.  
When reaches the desired point, press ENTER.  
The Title or Track and elapsed playing time will appear  
in the TV screen.  
To return to the Marker later, press SEARCH  
MODE four times (CD: three times) during playback  
and s or B to choose the desired marker, then  
press ENTER.  
NOTES:  
When doing this for the first time, enter any 4 digits. (except  
for 4737) That number will be used as the password from  
the second time onward.  
To change the password, press K or L to select CHANGE, then  
press ENTER. Enter the four-digit pass-word, then press ENTER.  
With some DVDs, it may be difficult to find if they are com-  
patible with parental lock. Be sure to check if the parental  
lock function operates in the way that you have set.  
Record the password in case you forget it.  
4
NOTES:  
Opening the disc tray or turning off the power or select  
IF YOU FORGET THE PASSWORD  
2
AC at step  
and press ENTER will erase all Markers.  
To clear a marker, using s or B, position the cursor on  
to the marker number to be cleared and press CLEAR.  
You can mark up to 10 points.  
1
2
Press 4, 7, 3, 7 at step 3.  
Password will be cleared and parental level will be set to ALL.  
Proceed the above steps 3-5 again.  
5
Press SEARCH MODE or RETURN to exit.  
DVD SETUP  
Audio Setting  
Black Level Setting  
DVD-V  
Choose the appropriate Audio settings for your equipment as it  
only affect during the playback of DVD discs of the DVD player.  
Adjust the Black Level Settings to make the black parts of  
the picture as bright as you preferred.  
1
1
2
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press ENTER.  
CUSTOM mode will appear.  
Press MODE during playback.  
ON  
3
4
Press s or B to select AUDIO, then ENTER to confirm.  
Press K or L to select the  
2
Press ENTER to switch ON/OFF  
.
ON : Makes the dark parts brighter.  
below items, then press  
ENTER.  
OFF : Shows the original picture as recorded.  
Press MODE twice or RETURN to exit.  
AUDIO  
DRC  
OFF  
ON  
DOLBY DIGITAL  
DOWN SAMPLING ON  
3
DRC (Dynamic Range Control) :  
To compress the range of sound  
volume.  
Virtual Surround  
You can enjoy stereophonic visual space on your existing  
stereo system.  
The default setting is OFF.  
DOLBY DIGITAL : QUICK  
DVD-V CD  
MP3  
Set to ON when the player is connected to Dolby Digital  
Decoder.  
1
Press MODE twice (CD/MP3: once) during playback  
.
(ON : Output by Dolby Digital)  
(OFF : Convert the Dolby Digital to PCM)  
The default setting is ON.  
OFF  
DOWN SAMPLING :  
2
3
Press ENTER to set it 1(Natural effect),  
2(Emphasized effect) or OFF.  
Press MODE or RETURN to exit.  
Set to ON when outputting in 48kHz.  
The default setting is ON.  
When playing disc with copyright Protection  
If you select OFF, copyright protection will be activated  
and sound will be down sampled at 48kHz.  
NOTE (for CD play only):  
Virtual Surround will not be effective if the sound mode  
is set to something other than STEREO.  
5
Press SETUP to exit.  
EN  
Download from Www.Somanuals.co1m3. All Manuals Search And Download.  
DVD SETUP  
Display Setting  
Language Setting  
DVD-V  
DVD-V  
Language options are not available with some discs.  
You can change certain aspects of the DVD display screens, on-screen  
messages and the display panel on the front of the DVD player.  
1
2
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press ENTER.  
CUSTOM mode will appear.  
Press s or B to select LANGUAGE, then ENTER  
to confirm.  
1
2
Press SETUP in STOP mode.  
Press B to select CUSTOM, then press ENTER.  
CUSTOM mode will appear.  
3
4
3
4
Press s or B to select DISPLAY, then ENTER to confirm.  
Press K or L to select the below  
items, then press ENTER.  
Press K or L to select the  
below items, then press  
ENTER.  
LANGUAGE  
AUDIO  
SUBTITLE  
DISC MENU  
PLAYER MENU  
TV ASPECT : QUICK  
DISPLAY  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
TV ASPECT  
PANEL DISPLAY  
ANGLE ICON  
4:3 LETTER BOX  
BRIGHT  
ON  
Press K or L for an item  
selection, then press ENTER.  
Select 4:3 LETTER BOX for a  
AUTO POWER OFF ON  
AUDIO :  
Sets the audio language.  
SUBTITLE :  
black bars appears on top and bottom of the screen.  
Select 4:3 PAN & SCAN for a full height picture with  
both sides trimmed.  
Select 16:9 WIDE if a wide-screen TV is connected to  
the DVD player.  
Sets the subtitle language.  
DISC MENU :  
Sets the language for DVD Menu.  
The default setting is 4:3 LETTER BOX.  
PANEL DISPLAY :  
PLAYER MENU : QUICK  
Sets the language for the On-Screen display.  
Press K or L to select a setting, then press  
ENTER.  
Press K or L for an item select BRIGHT, DIMMER  
and AUTO, then press ENTER.  
5
This adjust the brightness of the display panel with the  
factory default BRIGHT.  
If OTHER is selected in the AUDIO, SUBTITLE or DISC  
When AUTO is selected, the display dims only during playback.  
MENU screen, press four-digit number to enter the code for  
the desired language. (Refer to the language code list below).  
Only the languages supported by the disc can be selected.  
ANGLE ICON :  
Press ENTER repeatedly to turn Angle icon ON or OFF.  
The default setting is ON.  
AUTO POWER OFF :  
6
Press SETUP to exit.  
NOTE:  
Press ENTER repeatedly to turn Auto Power off ON or OFF.  
The default setting is ON and it will turn the DVD player  
Language Setting for Audio and Subtitle is not available  
with some discs. Then use AUDIO and SUBTITLE. Details  
to off automatically after 35 minutes of no use.  
5
Press SETUP to exit.  
are on pages 12.  
NOTES:  
Be sure to press the SETUP button, or the setting will not work.  
You can also choose the item by pressing the numbers.  
Language  
Code  
Language  
Frisian  
Code  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
Language  
Malay  
Code  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
Language  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE]  
T
Code  
6561  
5165  
6567  
6569  
6568  
A-B  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Galician  
Malayalam  
Maltese  
Maori  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Marathi  
Moldavian  
Mongolian  
Nauru  
Tagalog  
Tajik  
Tamil  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Nepali  
Norwegian [NOR]  
O-R  
Occitan  
Tatar  
Telugu  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Thai  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
Tibetan  
Tigrinya  
Tonga  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
Bulgarian  
Burmese  
Byelorussian  
U-Z  
Ukrainian  
Urdu  
Uzbek  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
C-E  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Chinese [CHI]  
Corsican  
Croatian  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
Czech  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
Korean [KOR]  
Kurdish  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
F-H  
Faroese  
Fiji  
Finnish [FIN]  
French [FRE]  
5261  
5256  
5255  
5264  
Singhalese  
Siswat  
Slovak  
Slovenian  
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change  
the Audio or Subtitle language setting on page 12. If you choose any other languages, ---will be displayed  
instead. (3 letter language code is written in bracket.)  
EN  
Download from Www.Somanuals.co1m4. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting  
the following checklist.  
Problem  
No power  
No picture  
Solution  
Check if the AC power cord is properly connected.  
Check if the TV is switched on.  
Check the video connection  
Distorted picture  
Sometimes a small amount of picture distortion may appear.  
This is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
No sound or distorted sound  
Connect DVD player directly to the TV.  
Make sure the disc is compatible with the DVD player.  
Adjust the volume.  
Check that the speakers are connected correctly.  
Check the digital connections.  
No audio at digital output  
Check if the audio format of the selected audio language matches  
your receiver capabilities.  
No DTS audio is output  
No sound and picture  
This player does not support DTS audio. This is not a malfunction.  
Check that the VIDEO/AUDIO cable is connected to the correct  
device (See Connecting to a TV)  
Picture freezes momentarily  
during playback  
Disc cant be played  
Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from center to edge.  
Ensure the disc label is facing up.  
Check if the disc is defective by trying another disc.  
Reset the player by switching the player off, then on again.  
No return to start-up screen when  
disc is removed  
The player does not respond to  
the remote control  
Aim the remote control directly at the sensor on the front of the player.  
Reduce the distance to the player.  
Replace the batteries in the remote control.  
Re-insert the batteries with their polarities (+/signs) as indicated.  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Buttons do not work or player stops  
responding  
Player does not respond to some  
operating commands during playback.  
DVD player cannot read  
CDs/DVDs  
Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVD player for repair.  
NOTES:  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owners Manual  
for details on correct operations.  
Playback from a desired track and random playback are not available during program playback.  
EN  
Download from Www.Somanuals.co1m5. All Manuals Search And Download.  
SPECIFICATIONS  
OUTPUT SIGNAL FORMAT  
NTSC color  
DIMENSIONS  
W435mm  
H 75mm  
POWER SOURCE  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
D 211mm  
WEIGHT  
Approx 1.8kg  
POWER CONSUMPTION  
11 W (standby: 4.8W)  
Designs and specifications are subject to change  
OPERATING TEMPERATURE  
5°C to 40°C  
without notice.  
If there is a discrepancy between languages, the  
default language will be English.  
MAINTENANCE  
Servicing  
Should your DVD player become inoperative, do not try to correct the problem by yourself. There are no user-service-  
able parts inside. Turn off, unplug the power cord, and please call our help line at 1-800-968-3429, to locate an  
Authorized Service Center.  
Cleaning the Cabinet  
Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,  
ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular  
motion.  
Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, adrasive cleaning agents or  
antistatic spray intended for analogue records.  
Cleaning the disc lens  
If the player still does not perform properly when it is operated while referring to the relevant sections and to TROU-  
BLESHOOTING GUIDEin this Owners Manual, the laser optical pickup unit may be dirty. Consult your dealer or an  
Authorized Service Center for inspection and cleaning of the laser optical pickup unit.  
Disc Handling  
Use discs which have the following logos on them. (Optical audio digital discs.)  
Recordable  
ReWritable  
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.  
Always store the disc in its protective case when it is not used.  
Make your contribution to the environment!!!  
Used up batteries do not belong in the dust bin.  
You can dispose of them at a collection point for used up batteries or special waste.  
Contact your council for details.  
EN  
Download from Www.Somanuals.co1m6. All Manuals Search And Download.  
CONTROLES DE OPERACIÓN Y FUNCIONES  
Consulte la figura 1, 2 da la página 6.  
PANEL DELANTERO / VISTA TRASERA  
1. Botón de la alimentación  
Púlselo para conectar y desconectar la alimentación.  
2. Bandeja de disco  
3. Botón de abertura/cierre (OPEN/CLOSE)  
Púlselo para introducir discos en la bandeja o sacarlos de ella.  
4. Botón de reproducción (PLAY)  
7. Botón de salto descendente/retroceso rápido  
(SKIP H/SEARCH h)  
Inicia la reproducción desde el principio del capítulo o  
pista actual. Manténgalo pulsado para que la reproduc-  
ción retroceda rápidamente.  
8. Botón de pausa (PAUSE)  
Inicie la reproducción del contenido del disco.  
5. Botón de parada (STOP)  
Hace una pausa en la operación del disco actual.  
9. Visualizador  
10. Cable de alimentación (AC Power Cord)  
Conecte a una toma de alimentacion.  
11. Toma de salida de audio digital coaxial (Digital audio out)  
12. Toma de salida de audio (AUDIO OUT Left/Right)  
13. Toma de salida de vídeo (VIDEO OUT)  
14. Toma de salida de vídeo componente  
15. Toma de salida de vídeo S (S-VIDEO OUT)  
Detiene la operación del disco.  
6. Botón de salto ascendente/avance rápido  
(SKIP G/SEARCH g)  
Inicia la reproducción desde el principio del capítulo o  
pista siguiente. Manténgalo pulsado para que la repro-  
ducción avance rápidamente.  
Consulte la figura 3 da la página 6.  
MANDO A DISTANCIA  
1. Botón de visualización (DISPLAY)  
Muestra el estado actual en la pantalla del televisor con  
fines de comprobación.  
2. Botón de la alimentación  
Púlselo para conectar y desconectar la alimentación.  
3. Botón de AUDIO  
14. Botón del ZOOM  
Amplia parte de una imagen de DVD reproducida.  
15. Botón de titulación (TITLE)  
Visualiza el menú de títulos.  
16. Botón de introducción (ENTER)  
Púlselo para aceptar un ajuste.  
Púlselo para seleccionar el modo de sonido o el idioma  
de audio deseado.  
4. Botón de subtítulos (SUBTITLE)  
Púlselo para seleccionar el idioma de subtítulos deseado.  
5. Botón de ángulos (ANGLE)  
Púlselo para cambiar el ángulo de la cámara y ver desde un  
ángulo diferente la secuencia que está siendo reproducida.  
6. Botón de repetición (REPEAT)  
Repite la reproducción del disco, título, capítulo o pista actual.  
7. Botón de repetición A-B (REPEAT A-B)  
Repite la reproducción de una sección seleccionada.  
8. Botón de cancelación (CLEAR)  
Repone un ajuste.  
9. Botón de pausa (PAUSE)  
17. Botón de retorno (RETURN)  
Púlselo para volver a la operación anterior.  
18. Botones de flechas (  
s
B
K
L)  
Utilícelos cuando haga ajustes mientras ve la visual-  
ización en una pantalla de televisión.  
19. Botón de MENU Visualiza los menús DVD.  
20. Botón de parada (STOP)  
Detiene la operación del disco.  
g
21.  
Hace que la reproducción avance rápidamente hasta un  
punto deseado.  
22. Botones SKIP H,G  
Presione para saltar capítulos o pistas.  
23. 0-9 Botones numéricos  
select numbered items in a menu  
+10  
Hace una pausa en la operación del disco actual.  
h
10.  
use this button to enter number 10 and above  
24. Botón de abertura/cierre (OPEN/CLOSE)  
Púlselo para introducir discos en la bandeja o sacarlos de ella.  
25. Botón del modo de búsqueda (SEARCH MODE)  
Púlselo para localizar un punto deseado.  
Hace que la reproducción retroceda rápidamente hasta  
un punto deseado.  
11. Botón de reproducción (PLAY)  
Inicie la reproducción del contenido del disco.  
12. Botón de preparación (SETUP)  
Púlselo para entrar en el modo de preparación o para  
cambiar elementos de preparación.  
13. Botón de modo (MODE)  
Activa el modo de reproducción programada o el modo  
de reproducción aleatoria. Para fijar conexión/desconex-  
ión de nivel negro y de virtual rodee.  
Visualización  
Permanece encendido cuando está  
Permanece encendido cuando está  
activada la función de repetición de capítulo  
activada la función de repetición de título  
Permanece encendido cuando está  
activada la función de repetición de pista  
Permanece encendido cuando está  
activada la función de repetición.  
Se enciende cuando  
se inserta un  
DVD en la bandeja.  
Permanece encendido  
cuando está activada la  
función de repetición A-B.  
CD:  
Se enciende cuando  
se inserta un CD en  
la bandeja.  
Permanece encendido cuando  
Visualiza el tiempo de reproducción del título o de la  
pista actual.  
Cuando se cambia un capítulo o una pista, se  
visualiza el número del nuevo título, capítulo o pista.  
el disco insertado está siendo  
Se enciende cuando el  
reproducido.  
disco insertado hace  
una pausa.  
EN  
Download from Www.Somanuals.co1m7. All Manuals Search And Download.  
CONTROLES DE OPERACIÓN Y FUNCIONES  
Visualizaciones Durante la Operación  
Instalación de las Pilas  
1. Abra la tapa del compartimiento de las  
pilas.  
Conexión de alimentación  
No hay disco insertado  
o reproducción de un  
DVD menú  
2. Introduzca dos pilas AA con las polari-  
dades colocadas correctamente.  
Bandeja abierta  
Bandeja cerrada  
Carga del disco  
3. Cierre la tapa.  
NOTAS  
No mezcle pilas alcalinas y de manganeso.  
Desconexión de alimentación  
No mezcle pilas viejas y nuevas.  
CONEXIONES  
Conexión a un Televisor  
Conexión a un Descodificador Dolby  
Digital  
Utilice un cable de vídeo S (de venta en el comercio) en  
lugar del cable de vídeo amarillo para disfrutar de imágenes  
de más alta calidad.  
Si utiliza este reproductor DVD para reproducir un DVD en  
un formato de sonido ambiental Dolby Digital de 5,1 canales,  
el reproductor DVD dará salida a un flujo de datos Dolby  
Digital desde su toma COAXIAL DIGITAL AUDIO OUT.  
Conectando el reproductor a un descodificador Dolby Digital,  
usted podrá disfrutar de un ambiente más convincente y  
real, con un sonido ambiental potente y de alta calidad de  
estándar profesional como el que puede oírse en los cines.  
Para hacer las conexiones de audio utilice cables digitales  
coaxiales de audio (de venta en el comercio).  
Consulte la figura 5 de la página 7  
Consulte la figura 6 de la página 7  
Conexión a un Amplificador  
Equipado con tomas de Entrada  
Digital, Platina MD o Platina DAT  
Consulte la figura 8 de la página 8  
Para hacer las conexiones de audio utilice cables digitales coaxiales  
de audio (de venta en el comercio).  
Conexión a un Televisor o a un  
Televisor Estéreo Que tenga tomas  
Component Video in  
Consulte la figura 7 de la página 8  
Consulte la figura 9 de la página 8  
EN  
Download from Www.Somanuals.co1m8. All Manuals Search And Download.  
REPRODUCCIÓN DE UN DISCO  
Reproducción de un DVD de Vídeo o  
un CD de Audio  
DVD-V CD  
Para empezar  
Conecte la alimentación del televisor, amplificador y cualquier  
otro componente que esté conectado al reproductor DVD.  
(Cambie el sistema de entrada para adaptarlo al reproductor  
DVD, y compruebe que el volumen del sonido sea correcto.)  
1
2
3
Pulse el botón POWER.  
La alimentación se conectará.  
Pulse el botón OPEN/CLOSE.  
La bandeja de carga del disco se abrirá.  
Ponga un disco en la bandeja.  
Asegúrese de que el disco esté correctamente asenta-  
do en el hueco correcto, con el lado de la etiqueta  
hacia arriba.  
4
Pulse el botón PLAY.  
La bandeja se cerrará automáticamente y la reproduc-  
ción empezará desde el primer capítulo o pista del  
disco. Necesitará pulsar el botón PLAY sólo cuando la  
bandeja haya sido cerrada pulsando el botón  
OPEN/CLOSE.  
Cuando reproduzca un DVD que tenga grabado un  
menú de títulos, el menú tal vez aparezca en la pan-  
talla.  
5
Pulse el botón STOP para detener la reproducción.  
EN  
Download from Www.Somanuals.co1m9. All Manuals Search And Download.  
LIMITED WARRANTY  
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or  
workmanship as follows:  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the  
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this  
warranty.  
LABOR:  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date  
of original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PUR-  
CHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED  
TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing  
or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to  
any product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not  
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,  
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this  
product or damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS  
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE  
PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE  
UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS  
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE  
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI  
CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,  
please call 1-800-968-3429 or write to the following:  
FUNAI CORPORATION, INC.  
Customer Service  
100 North Street; Teterboro, NJ 07608  
Tel :1-800-968-3429  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
Printed in China  
0VMN03331  
#####  
 
E5700UD  

Shure Headphones SRH550DJ User Manual
Smooth Fitness Home Gym CE 74 User Manual
Sonance Speaker VP69 User Manual
Sony Digital Camera 4 170 840 121 User Manual
Sony Universal Remote NHS 703 User Manual
SPX Cooling Technologies Humidifier 7012D081 7012H121 User Manual
Sunrise Global Electric Heater 13 05020 User Manual
Swann Security Camera Single Channel Digital Security Recorder User Manual
Swann Security Camera SW211 STY User Manual
Symbol Technologies Scanner P370 User Manual