HDMI® Over CAT5/6 Repeater for
ST12MHDDC
ST12MHDDCRP
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/16/2013
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements.............................................................................................................................. 1
Preparing Your Site ................................................................................................................................... 4
Hardware Installation .............................................................................................................................. 5
Specifications..........................................................................................7
Technical Support ..................................................................................8
Warranty Information............................................................................8
Instruction Manual
i
Introduction
The ST12MHDDCRP HDMI® to CAT5 Repeater works with the ST12MHDDC HDMI®
Extender Kit to add additional displays and extend the HDMI® over Cat 5/6 signal. With
2 RJ45 outputs per unit, each repeater allows you to add a display, and also daisy-chain
the signal to 2 additional ST12MHDDCRP repeaters (sold separately) at up to 330 feet
(100 meters) at each level.
Additional repeaters can be added at any time, up to a maximum of 30 broadcasting
levels to over 100 displays - allowing for a highly scalable installation that can be used
with existing network cable for a cost-effective and flexible extension. Each repeater
includes mounting hardware for a clean and professional installation. Plus, because
the HDMI® signal is extended over standard Cat5/Cat6 Ethernet cable with RJ45
connectors, proprietary cables aren’t necessary which eliminates both expense and the
hassle of running specialized cable.
Ideal for High-Definition applications, the HDMI® over UTP extender supports 1080p
video resolutions, 7.1 digital audio and features built-in EDID monitor emulation,
which ensures native resolution and maximum compatibility with your display or
projector, for a convenient plug-and-play installation.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Packaging Contents
•
•
•
•
HDMI® Repeater
Power Adapter
Instruction Manual
Foot Pad Set
System Requirements
•
•
•
•
ST12MHDDC HDMI® Extender Kit
HDMI® enabled display device(s) One for each Repeater (i.e. television, projector)
Available AC electrical outlet for transmitter, receiver and optional repeaters
HDMI® cable for each display
Instruction Manual
1
ST12MHDDCRP Repeater Unit
Front View of Repeater
Back View of Repeater
1. HDMI® Out
1. Power jack
2. Power Status LED
3. Link Status LED
4. EDID Copy Button
2. HDMI® Out Link #1 (RJ-45 Connector)
3. HDMI® Out Link #2 (RJ-45 Connector)
4. HDMI® In Link (RJ-45 Connector)
ST12MHDDC HDMI Extender Kit (Sold Separately)
Transmitter Unit
Front View of Transmitter
Back View of Transmitter
1. Power Jack
1. HDMI® IN
2. HDMI® Out Link (RJ-45 Connector)
2. Power Status LED
3. Link Status LED
Instruction Manual
2
Receiver Unit
Front View of Receiver
Back View of Receiver
1. Power Jack
1. HDMI® IN
2. HDMI® Out Link (RJ-45 Connector)
2. Power Status LED
3. Link Status LED
Instruction Manual
3
Preparing Your Site
NOTE: This device will only work with the ST12MHDDC HDMI Extender kit. Please
review site preparation steps from the ST12MHDDC manual prior to installing
additional Repeaters.
1. Determine where the Repeater/Display will be installed in relation to the
ST12MHDDC HDMI Extender kit (sold separately) and place/mount the display
appropriately.
2. (Optional) If using additional repeater unit(s) (sold separately), determine where
the remote display(s) will be located in relation to this repeater/display and place/
mount the display(s) appropriately. Repeaters allow for an additional 330 ft. (100
meters) of Cat5/6 between each device. The Repeater(s) must be situated between
the ST121MHDDC extender and the receiver, as the receiver portion does not have
an RJ-45 out port to continue the chain.
NOTE: Ensure the Repeater Unit(s) are situated near an available AC electrical outlet.
Make sure all devices are turned off before beginning installation.
Instruction Manual
4
Hardware Installation
NOTE: This device will only work with the ST12MHDDC HDMI® Extender kit. Please
review the Hardware Installation steps from the ST12MHDDC manual prior to installing
additional Repeaters.
1. Install RJ-45 terminated Cat5/6 Ethernet Cable
a) Connect an RJ-45 terminated Cat5/6 Ethernet cable to the HDMI® Out Link (RJ-45
Connector) on the local Unit (Transmitter or Repeater).
NOTE: If you are using surface cabling, ensure you have enough Category 5/6
unshielded twisted pair (UTP) network cabling to connect the Transmitter Unit to
the Remote Unit’s (Repeater/Receiver) location, and that each end is terminated
with a RJ45 connector. The cabling should not go through any networking
equipment (i.e. router, switch).
OR
If you are using premises cabling, ensure that the Category 5/6 unshielded
twisted pair (UTP) network cabling between the Host Unit and the
Remote Unit has been properly terminated in a wall outlet in each location and
there is a patch cable long enough to connect the Remote Unit and the Host Unit
to their respective outlets. The cabling should not go through any networking
equipment (i.e. router, switch).
b) Connect the other end of the Cat5/6 cable run to the RJ45 connector on the
Repeater unit.
c) (optional) When adding multiple repeaters, a run of Cat 5/6 cable will be
required from and to each device.
2. Install Repeater Unit(s)
a) Position the Repeater Unit near the video display (i.e. television, projector) within
330 ft. (100 meters) from the level up device be it the initial transmitter or
another repeater.
b) Connect the video source to the HDMI® Out on the Repeater Unit using an
HDMI® cable.
c) Connect the Cat5/6 cable positioned in Step 1 to the”HDMI® In Link (RJ-45
Connector)”on the Repeater. Connect the Repeater Unit power supply. The
Power LED will light, and LINK LED will turn on after a successful connection
between both units is established. This may take several seconds.
Instruction Manual
5
NOTE: These steps can be repeated at each level when adding additional Repeaters up
to 30 levels. Each Repeater has two HDMI® out Links (RJ-45 Connectors) allowing for
the same signal to go in 2 different directions at each level.
3. Install Receiver Unit
d) Position the Receiver Unit near the video display (i.e. television, projector) within
330 ft. (100 meters) from the level up device be it the initial transmitter or
another repeater.
e) Connect the video source to the HDMI® out on the Receiver Unit using an
HDMI® cable.
f) Connect the provided Receiver Unit power supply. The Power LED will light,
and Link LED will turn on after a successful connection between both units is
established. This may take several seconds.
NOTE: The ST12MHDDC receiver (sold separately) should only be used as the last
device in the chain as it does not have an HDMI® out port (RJ-45 Connector).
4. Your source video image will now appear on the Repeater unit(s) attached
video display.
Instruction Manual
6
Specifications
Input Connectors
1x RJ-45 Female
1x RJ-45 Female
Output Connectors
1x HDMI (19 pin) Female
Max Distance
100 m / 330 ft
Maximum Digital Resolutions
1920x1200 @60Hz
1920 x 1200
1920 x 1080
1600 x 1200
Supported Resolutions
Wide Screen Supported
Audio Specifications
Input Voltage
Yes
7.1 Surround Sound
100~240V
0.4 A A
Input Current
Output Voltage
5 AC V
Power Adapter
Output Current
2 A A
Center Tip
Polarity
Positive
M
Plug Type
Instruction Manual
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
8
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
|