Soundstream Technologies Portable DVD Player VCM 11DXX User Manual

VCM-11DXX  
11.2 TFT-LCD DVD/SD/USB  
COMBO MONITOR  
M
MENU  
POWER  
AV  
PLAY  
OWNER S MANUAL  
 
Contents  
Mute  
24  
24  
24  
Caution  
4
Play or Pause  
Audio  
Features and Controls  
Monitor/DVD Player  
Remote Control  
6
6
8
Stop  
25  
25  
25  
Arrows  
Setup  
Menu  
Power and Mode Selection  
Releasing The Monitor  
Turning on The Monitor  
Mute Function  
10  
10  
10  
10  
25  
Display  
Number Buttons  
Subtitle  
Title  
26  
26  
27  
27  
AV mode  
11  
Picture Control  
Contrast/Brightness/Color/FM  
12  
12  
Slow  
Fast Reverse Searching  
27  
28  
DVD Setup  
Setup Menu  
13  
13  
Fast Forward Searching  
Previous  
28  
29  
29  
General Setup  
TV Aspect Ratio  
Angle Viewing  
14  
14  
14  
Next  
Repeat A-B  
29  
Repeat  
NTSC/PAL  
Angle  
30  
30  
30  
OSD Language  
14  
15  
Screen Saver  
Audio Setup  
15  
31  
PBC  
Zoom  
Dolby Digital Setup  
Equalizer Settings  
Video Setup  
16  
16  
18  
31  
31  
GO TO  
Quality  
SD/USB Functions  
18  
21  
32  
Preferences Setup  
Connection Diagram  
Installation  
33  
34  
TV Type  
PBC  
Audio  
21  
21  
21  
21  
22  
22  
35  
Subtitle  
Disc Information  
Troubleshooting  
Specifications  
Disc Menu  
Parental  
Default  
36  
37  
22  
23  
Password Setup  
Password Mode  
Password Change  
DVD Functions  
23  
23  
24  
Eject  
Vol+/Vol-  
24  
24  
3
 
SPECIFICATIONS  
Caution  
Please read and observe all warnings and instructions in this manual  
and those marked on the unit. Retain this booklet for future reference.  
There are two kinds of alarm symbols as follows:  
Power  
DC 12V  
Screen Format  
Resolution Pixel  
Color System  
A/V Input  
16:9  
The lightning bolt with arrowhead inside in an equilateral  
triangle is intended to alert the user to the presence of  
dangerous voltagewithin the product s enclosure that may be  
of sufficient magnitude to constitute a risk of electric shock to  
people.  
2400x480  
,
NTSC/PAL Auto Select  
WARNING  
DVD-AV1-AV2  
A/V Output  
Dimension  
1 EA  
The exclamation point inside an equilateral triangle is intended  
to alert the user to the presence of important operating and  
maintenance (servicing) instructions in the literature accompanying  
With shroud:14. 6(L)X12. 6(W)X3. 3(H)inches  
Dimension  
Without shroud:14. 3(L)X12. 4(W)X2. 4(H)inches  
the product.  
CAUTION  
Note: This equipment has been tested and has been found to comply  
with the limits for a Class A digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference when the equipment is operated in a  
commercial environment. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference  
to radio communications. Operation of this equipment in a residential  
area is likely to cause harmful interference. In some cases, the user will  
be required to correct the interference at his own expense.  
WARNING  
Do not mount the product where  
it will obstruct the deployment of  
Installation of all TV monitors  
the airbag or in an area where it  
,
M
E
N
U
must be out of the driver s  
field of vision.  
would affect the driver s ability  
to control the vehicle. Also be  
careful to avoid mounting the  
product where it can become  
hazardous during sudden stops  
or in the event of an accident.  
Do not try and service these  
products yourself, locale a  
qualified service center or  
factory service center for all  
repairs.  
Use extra caution with any liquids  
in your car. If you or your child  
spills any liquid on these products,  
pull your vehicle to the roadside  
and turn the key off to disconnect  
or wipe the products with a towel. Do not  
operate the equipment until all liquids have  
either evaporated or you have had the monitor  
inspected at a service center by a qualified  
technician. Severe harm or danger can result.  
Be careful not to drop or  
apply under pressure to the  
front panel of your video  
monitor. If the screen cracks  
due to misuse, your warranty  
will be void!  
Use only a damp cloth to clean  
the screen and use only purified  
water on the cloth. wring out all  
excess water prior to wiping the  
screen. Do not use any cleaners  
or chemicals to clean the screen.  
In most cases a dry cloth will do!  
4
37  
 
Caution  
Troubleshooting  
CAUTION  
Watching the monitor for an  
extended period of time  
without the engine running  
may deplete the vehicle s  
battery charge.  
Symptom  
Items to Check  
Actions to be Taken  
Quality installations are best  
performed by qualified and  
certified installers.  
Buttons do not work.  
No sound  
Is the power turned on?  
Check the car battery capacity.  
Is the audio which is connected with  
the audio cable set to receive  
the DVD signal output?  
Select the correct input mode for the audio receiver.  
Connect the audio cable into the jacks securely.  
Turn on the monitor connected with the audio cable.  
Is audio cable connected securely?  
Set the Audio Output to the correct position,  
and then turn on the DVD player again by pressing  
the POWER button.  
Is the monitor which is connected  
with the audio cable turned on?  
This product is designed for  
operation with a 12 Volt DC,  
negative ground vehicle. It  
is not suitable for operation  
under other conditions or  
voltages.  
Is the audio output set  
in the correct position?  
Don t touch the unit if there is  
a flash of lightning. You may  
receive an electric shock.  
Remote control does  
not work properly.  
Is the remote control facing  
the remote sensor?  
Point the remote control toward the remote sensor of  
the product.  
Is the distance too far?  
Use the remote control within 15 feet.  
Remove the obstacle.  
Is there any obstacle in the middle?  
Is the battery weak?  
Replace with new battery.  
Do not cover or stop up heater  
ducts or vents. It may cause a  
fire or receive an electric shock.  
Do not bring magnetic devices  
such as credit card or magnetic  
card near the magnets.  
Moisture or condensation on lens  
When a disc is brought from a cold environment to a warm one, there may be moisture  
on the the disc, or condensation on the pickup lens. It will affect disc playback.  
Operating Notes  
1. The operating temperature of this product is limited to 14 ~+140 F.  
2. If your vehicle is extremely hot or cold you must allow time for your air  
conditioner or heater to cool or heat the vehicle until operating temperatures  
have returned to normal operating ranges.  
1. Remove the disc from the DVD player.  
2. Turn on the power and leave it on for an hour to vaporize the condensation.  
3. Optimal picture quality is achieved when viewed from directly front of the  
monitor (+/-30degrees).  
4. Do not open the housing and attempt to make any repairs yourself. Refer  
servicing to qualified personnel.  
5. DVD Players use an invisible laser beam which can cause hazardous radiation  
exposure. Be sure to operate the unit correctly as instructed.  
6. Do not cut the car power supply off while a disc is playing. It can cause  
damage to the DVD Player.  
7. If the buttons get stuck, please try to press the up of buttons, it will get back.  
It won't impact using normal.  
8. If you cann't find the files name in list when playing, please reset units or  
turn off/on over again.  
9. If the unit cann't be change mode when playing some special files which the unit  
didn't support, please reset units or turn off/on over again.  
5
36  
 
Features and Controls  
Disc Information  
Monitor/DVD Player  
DVD features  
DVD discs provide high-resolution images with high-quality sound. This DVD player  
can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and  
MP3 discs.  
Discs that cannot be played  
MONIT  
OR  
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In  
addition, a CD or a CD-RW which was recorded on special software cannot be played.  
Remote Control  
Region code  
Your DVD player is designed and manufactured to region management information  
that is recorded on a DVD disc. Please check the region code.  
1: North America 2: Japan 3: Korea and Southeast Asia  
4: Australia, Mid & South America 5: Russia 6: China  
How to handle the disc  
Dont touch the shiny side of the disc (the side with the embedded information).  
Dont stick a label or a glue-based note on either side of the disc.  
Dont use discs that have glue or a damaged label with exposed adhesive residue.  
It might result in damage to your DVD player.  
M
MENU  
POWER  
AV  
PLAY  
Dont put discs in the sunshine.  
Park your car in the shade.  
Monitor/DVD Player  
How to handle the discs  
Only use round discs. Discs with other shapes like a star, a heart, etc. may cause  
damage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dry  
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not  
use any type of solvent such as thinner, benzene, commercially available cleaners or  
antistatic spray. To avoid damaging your DVD player, dont use a scratched disc.  
Wireless Headphones  
(Not Included)  
6
35  
 
Installation  
Features and Controls  
POWER Button  
PLAY/PAUSE Button MENU Button  
1. Open the package and check that these items are presents.  
Dome Light Button  
M
MENU  
AV  
POWER  
PLAY  
INSTALLATION PLATE  
UNIT  
SCREW A  
SCREW B  
ON DOOR OFF  
Skip Forward/Back Button  
2. Connect the external compoments to the RCA cable or AV output.  
(Refer to the connection diagram on page 33)  
AV Select Button  
+/- Buttons  
3. Match the position of installation bracket and  
installation plate with screw A.  
EJECT Button  
Disc loading slot  
M
MENU  
POWER  
AV  
PLAY  
Audio  
Video  
RESET  
AV2 INPUTS  
4. Tighten the unit with the supplied  
screw B.  
USB  
SD  
SD Input USB Input  
.
..  
X
.
Caution  
Do not bring magnetic devices  
such as credit cards or magnetic  
cards near the monitor.  
34  
7
 
Connection Diagram  
Features and Controls  
Remote Control  
1
POWER  
Turns the DVD Player/Monitor on or off.  
2
MUTE  
Press this button to switch off the  
audio during playback. Press again  
to restore the audio.  
Red AUDIO(R)  
Red AUDIO(R)  
GAME  
GAME  
White AUDIO(L)  
MONITOR  
White AUDIO(L)  
(not function in this unit)  
3
Vol+  
Yellow VIDEO  
Yellow VIDEO  
To start playback of iPOD, press  
this button. Press again to pause  
the playback. If playback is paused,  
press this button to resume  
playback.  
CAMCORDER  
CAMCORDER  
Vol-  
YELLOW  
AV Input  
(AV 2)  
+ 12 V DC Battery  
AV Input  
(AV 1)  
BLACK  
RED  
VOL-/VOL+ (not function in this unit)  
Chassis Ground  
ACC  
Use to incease or decrease  
volume level.  
Red AUDIO(R)  
Door Trigger  
WHITE  
AMP  
RIGHT( )/LEFT( ) ARROWS  
(not function in this unit)  
White AUDIO(L)  
Use these buttons(press once)  
to skip to the next or last track,  
chapter or file on the iPOD in  
the player. But if you use these  
buttons (press continuous) to  
select either fast forward or fast  
reverse playback.  
Yellow VIDEO  
MONITOR  
P
O
W
E
R
AV  
M
E
N
U
V
O
L
-
VOL+  
AV  
Output  
AV SELECT  
DVD AV1 AV2  
MENU (OSD on monitor)  
Press this button to open the on-  
screen menu system to setup and  
control various parameters of the  
monitor and DVD player.  
UP/DOWN  
Use to move to the desired menu.  
P/N  
TITLE (Title menu)  
When a DVD is playing, press this  
button to view the Title Menu.  
This button permits you to choose  
among Multi, PAL and NTSC.  
DISPLAY  
Press to show elapsed or remaining  
time of a chapter or a title.  
MODE  
Use this button to switch between  
three modes  
DVD SD USB  
PBC (Video CD only)  
FM ANTENNA  
MENU (DVD menu)  
Press this button to access the special  
Playback Control functions for VCD  
2.0 format Video CD S.  
This button permits you to view the  
menu on the DVD.  
+
Door Trigger  
-
NUMERIC button  
SUBTITLE  
Use this button to select the menu  
for choosing a subtitle language.  
Use when making a selection on the  
menu screen.  
8
33  
 
SD/USB Functions  
Features and Controls  
1. When USB or SD is inputed, the monitor will be displayed as shown below. But when  
you input USBthat the function can not change into SDS state (only the SD is  
moving). And you can select the desired menu by pressing the MODE button on the  
remote control of monitor.  
GO TO  
RETURN  
Use to search for a title or a chapter on  
your DVD disc.  
Press this button to return to the root menu  
SETUP  
Press this button to display the Setup  
menu. The Setup menu enables you  
to enter the settings required for the  
unit to work properly.  
STOP  
2. Use the (arrow and ENTER) buttons to select and set desired settings.  
Press this button to stop the playback  
of the current disc.  
SKIP FORWARD/BACK  
00:00 00:00  
000/003  
kbps  
REPEAT  
Use these buttons to skip to the next  
or last track, chapter or file on the  
disc in the player.  
Press this button to change the playback  
mode to repeat.  
\
A-B (repeat from A to B)  
FAST FORWARD/REVERSE PLAY  
Use this button to select the beginning  
and end of a track which you wish to have  
repeat in playback.  
Use these buttons to select either fast  
forward or fast reverse playback.  
..  
..  
VOL-/+ button  
Use to incease or decrease volume level.  
AUDIO  
Use this button to select one of the  
audio soundtracks programmed on a  
DVD disc. It is alse used to select the  
audio output mode for the DVD  
playback.  
ENTER  
Press this button to confirm the item  
you have found and highlighted using  
the arrow buttons. Usually this is done  
to confirm a selection or item to be  
played on the DVD.  
ZOOM  
If your DVD disc supports zooming in  
to see the program differently, pressing  
this button will enable you to change  
the amount of zoom.  
UP/DOWN/RIGHT/LEFT ARROWS  
Use thes buttons to navigate the  
various menus and screens for the  
monitor and DVD systems.  
PLAY/PAUSE  
To start playback of a disc, press this  
button. Press again to pause the  
playback. If playback is paused, press  
this button to resume playback.  
9
32  
 
Power and Mode Selection  
DVD Functions  
PBC  
Releasing The Monitor  
[DVD]/[AUDIO]/[MP3]  
This button does not function in PBC mode.  
[VCD]  
Push the release button (located on the front edge of the screen housing) and  
lower the monitor. You can also adjust the swivel angle.  
You can turn the PBC (Play Back Control) function on or off by pressing this button.  
When PBC is loaded, the PBC function is enabled automatically. This function is  
similar to selection of DVD title. Please note that this function does not work with  
MP3 dics.  
M
MENU  
POWER  
AV  
PLAY  
Make this arrow in DOWN  
direction only.  
Zoom  
CONDITION  
ZOOM X 2  
ZOOM X 3  
ZOOM X 4  
ZOOM X 1 / 2  
ZOOM X 1 / 3  
ZOOM X 1 / 4  
Off  
OSD  
2 X  
[DVD]  
Some DVDs are programmed to allow you to zoom into  
the image, magnifying it. Pressing the ZOOM button  
does this in steps, according to the chart to the right.  
PULL BUTTON  
3 X  
4 X  
1 / 2  
1 / 3  
1 / 4  
Turning on The Monitor  
[VCD]/[AUDIO]/[MP3]  
1. Connect the monitor to external devices.  
This button does not function in this mode.  
2. Press the POWER button on either the remote control or the unit once to turn  
the power on.  
GO TO  
Press the same POWER button to turn the power off.  
The GO TO function allows you to begin playback at a specific location on the disc. To  
do this, press GO TO and navigate the screen which follows to select this playback  
location.  
POWER  
Title  
Move to the desired title.  
POWER  
Chapter  
Move to the desired chapter.  
REMOTE CONTROLLER  
UNIT  
Audio  
Selects the desired audio output.  
3. Power on the external devices and play.  
Subtitle  
Select the desired subtitle.  
Menu  
Mute Function  
Title  
01 / 02  
Chapter  
Audio  
06 / 61  
Angle  
1. Press the MUTE button on the remote control to mute the audio.  
5.1CH Chinese  
OFF  
Subtitle  
Watch the different view angle.  
2. Press the MUTE button again on the remote control to return to the  
previous volume level.  
Title Elaapsed 0:20:02  
TT Time  
Total time.  
Bitrate 31  
CH Time  
Chapter time.  
Repeat  
Sets the repeat play.  
Time Display  
Watch play time.  
10  
31  
 
Power and Mode Selection  
DVD Functions  
Selecting an AV mode  
Repeat  
1. Turn the power ON on the unit and on the external devices.  
[AUDIO]  
[DVD]  
2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button on  
the unit or on the remote control.  
Pressing REPEAT button changes  
the play mode as follows:  
Pressing REPEAT button changes  
the play mode as follows:  
OSD  
Chapter  
CONDITION  
OSD  
CONDITION  
Repeat single  
3. Play the external device.  
Repeat chapter  
Repeat title  
Track  
All  
All  
Title  
All  
All  
Repeat off  
Repeat off  
[VCD]  
[MP3]  
The REPEAT button does not function  
when a VCD disc is being played.  
Pressing REPEAT button changes  
the play mode as follows:  
OSD  
CONDITION  
Single  
Repeat One  
Repeat Folder  
Repeat folder  
Folder  
Repeat folder one time  
Shuffle  
Random  
Single  
All  
Random play  
Single play  
NTSC/PAL  
This button is used to select the video standard for the DVD mode between NTSC  
and PAL formats.  
Angle  
Some DVD s are recorded with additional footage which allows you to view a scene  
from a different camera angle. If the ANGLE feature is enabled in the Setup Menu  
(see page 14) and the disc has this option,an angle markwill be displayed on  
the screen. When that occurs, press the ANGLE button to see these alternate viewing  
angles.  
11  
30  
 
DVD Functions  
Picture Control  
Contrast/Brightness/Color/FM  
Prev(  
)
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until  
you arrive at the screen for that item. Use the arrow buttons to adjust the value.  
Press the MENU button to make another adjustment or leave the MENU system.  
[DVD]/[VCD]  
Press this button to advance the player from the current chapter to the previous  
chapter.  
1. Bring up the on-screen function menu by pressing the MENU button on the unit  
or the remote control.  
[AUDIO]/[MP3]  
Press this button to move to the previous track.  
2. Press the MENU button on the unit or the remote control of monitor until you see  
the item you wish to adjust.  
3. Use the arrow buttons to adjust the value.  
4. Press the MENU button to make another adjustment or leave the MENU system.  
Next(  
)
CONTRAST  
[DVD]/[VCD]  
50  
Press this button to advance the player from the current chapter to the next chapter.  
BRIGHTNESS  
[AUDIO]/[MP3]  
50  
Press this button to move from the current track to the next track.  
COLOR  
50  
FM  
87.7  
Repeat(A-B)  
(FM function added 87.7 87.9 88.1 88.3 88.5  
88.7 88.9 89.1MHz)  
[DVD]/[VCD]/[AUDIO]  
You can set the player to repeat a segment over and over until you cancel it. To do  
this, you mark the beginning of the desired segment (A) and the end of segment (B).  
The selected segment will be  
repeated automatically until canceled.  
OSD  
A
CONDITION  
Start point of repeat  
A
B
Ending point repeat function  
12  
29  
 
DVD Setup  
DVD Functions  
Fast Reverse Searching(  
[DVD]  
)
Setup Menu-Main Page  
[AUDIO]  
Pressing FR button repeatedly changes  
the play mode as follow:  
Pressing FR button repeatedly  
changes the play mode as follow:  
When the SETUP button is pressed, the setup menu will be displayed as shown  
below. Select the menu category and make changes according to your preferences.  
OSD  
FR 2X  
FR 4X  
FR 8X  
FR 16X  
FR 32X  
PLAY  
CONDITION  
2X rewind search  
4X rewind search  
8X rewind search  
16X rewind search  
32X rewind search  
Play  
OSD  
CONDITION  
2X rewind search  
4X rewind search  
8X rewind search  
16X rewind search  
32X rewind search  
Play  
FR 2X  
FR 4X  
1. Press the STOP button if the disc is playing.  
2. Press the SETUP button to display setup menu.  
FR 8X  
FR 16X  
[MP3]  
Pressing FR button repeatedly  
changes the play mode as follows:  
FR 32X  
PLAY  
General Settup Page  
OSD  
FR 2X  
FR 4X  
FR 8X  
FR 16X  
FR 32X  
PLAY  
CONDITION  
2X rewind search  
4X rewind search  
8X rewind search  
16X rewind search  
32X rewind search  
Play  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
ENG  
On  
Screen Saver  
Fast Forward Searching(  
[DVD]  
Pressing FF button repeatedly changes  
)
[AUDIO]/[VCD]  
Pressing FF button repeatedly  
changes the play mode as follow:  
the play mode as follow:  
Go To Geenerall Setuupp Page  
OSD  
FF 2X  
FF 4X  
FF 8X  
FF 16X  
FF 32X  
PLAY  
CONDITION  
2X forward search  
4X forward search  
8X forward search  
16X forward search  
32X forwardsearch  
Play  
OSD  
CONDITION  
2X forward search  
4X forward search  
8X forward search  
16X forward search  
32X forward search  
Play  
FF 2X  
FF 4X  
3. Use the (arrow and ENTER) buttons to select and set desired settings.  
FF 8X  
FF 16X  
4. Press the SETUP button again to turn off the setup menu.  
[MP3]  
Pressing FF button repeatedly  
changes the play mode as follows:  
FF 32X  
PLAY  
OSD  
FF 2X  
FF 4X  
FF 8X  
FF 16X  
FF 32X  
PLAY  
CONDITION  
2X forward search  
4X forward search  
8X forward search  
16X forward search  
32X forwardsearch  
Play  
13  
28  
 
DVD Setup  
DVD Functions  
General Setup  
Subtitle(SUB-T)  
1. TV Aspect Ratio  
In the Setup function called TV Display, you set the player to output the video signal at the  
same aspect ratio as your monitor. If the monitor is widescreen format, selectWIDE.”  
If it is asnormalscreen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B  
(Letterbox).  
[DVD]  
This button is used to select the language for the on-screen display system.  
(This title menu may vary, depending on the particular DVD.)  
Normal / PS 4:3 PAN SCAN  
Choose this setting if you want the movie to fill the entire screen.  
(This might mean that the left and right edges won t be seen)  
Normal / LB 4:3  
Choose this setting if you want to see the movie in its original aspect ratio.  
(The movie might appear with black bars at the top and bottom of the screen.)  
Title  
Wide 16:9 WIDE SCREEN  
Choose this setting if your DVD Player is connected to a widescreen TV.  
(This opition is available only if the disc has a 16:9 display aspect ratio.)  
[DVD]  
Used to display the title menu of the loaded DVD disc.  
This function is only present on discs which support it.  
General Settup Page  
TV Display  
Angle Mark  
OSD Lang  
PS  
Normal/PS  
Normal/LB  
Wide  
On  
ENG  
On  
Slow(  
)
Screen Saver  
[DVD]/[VCD]  
OSD  
CONDITION  
2X slow forward  
1 / 2  
Use this button to play a disc in slow-forward or  
slow-reverse. Slow playback can be done at five  
different speeds. Pressing this button repeatedly  
decreases the speed in steps. Pressing a sixth  
time returns playback to the normal speed.  
2. Angle Viewing  
Set TV Dispplay Mode  
4X slow forward  
8X slow forward  
16X slow forward  
32X slow forward  
2X slow rewind  
4X slow rewind  
8X slow rewind  
16X slow rewind  
1 / 4  
Some DVD discs contain programming which allows you  
to view a scene from a few different camera angles. You  
can tell when a scene is so recorded when anAngle Mark”  
is displayed on the screen. This mark will only appear if you  
have enabled the Angle Mark feature  
1 / 8  
1 / 16  
1 / 32  
1 / 2  
General Settup Page  
TV Display  
PS  
Angle Mark  
OSD Lang  
Screen Saver  
On  
ENG  
On  
On  
Off  
in the DVD Setup menu.  
On: When selected, the screen will be shown with  
angle mark.  
1 / 4  
1 / 8  
Off: When selected, no angle mark is shown on  
the screen.  
1 / 16  
Set Anglle Mark  
32X slow rewind  
Play  
1 / 32  
Play  
3. OSD Language  
General Settup Page  
English  
Korean  
French  
TV Display  
PS  
Use this option to set the OSD language.  
When selected, change to set the on-screen display  
language.  
Angle Mark  
OSD Lang  
Screen Saver  
On  
ENG  
On  
German  
Italian  
Spanish  
Portuguese  
Dutch  
Set OSD Laanguage  
14  
27  
 
DVD Setup  
DVD Functions  
Display  
4. Screen Saver  
General Settup Page  
[DVD]  
Pressing the DISPLAY button on the  
remote control changes the play mode as information about the current CD on the  
follows:  
[AUDIO]  
Pressing the display button displays  
The screen saver is useful to prevent your display  
from becoming damaged. The screen saver picture  
appears when you leave the DVD player in stop mode  
for about two minutes.  
TV Display  
PS  
Angle Mark  
OSD Lang  
Screen Saver  
On  
ENG  
On  
On  
Off  
screen as follows:  
OSD  
CONDITION  
OSD  
CONDITION  
Screen Saver  
Single Elapsed  
Display the single elapsed  
Display the Title Elapsed  
Display the Title Remain  
Title Elapsed  
Title Remain  
Single Remain  
Total Elapsed  
Display the single remain  
Display the total elapsed  
Display the total remaining  
Display the Chapter Elapsed  
Display the Chapter Remaining  
No sign  
Chapter Elapsed  
Chapter Remain  
Total Remain  
Display Off  
[VCD]  
[MP3]  
Your DVD player will display the counter  
automatically when you play the MP3 disc.  
Whenever press the button,title chapter  
will be displayed as follows:  
OSD  
CONDITION  
Display time  
Audio Setup  
Single Elapsed  
Single Remain  
Display Off  
Left display time  
No sign  
Audio Setuup Page  
Number Buttons  
[DVD]  
Speaker SSetup  
SPDIFF Setup  
Dolbyy Digiital Setup  
Channeel Delay  
Equalizer  
The 0 through 9 number buttons are used to enter the number of the track, the number  
of the DVD chapter, the time, the date, etc.  
[AUDIO]  
OSD  
CONDITION  
3D Proceessing  
Select a track by pressing the  
corresponding number button.  
Select Track:__  
Select track no  
[DVD]  
OSD  
CONDITION  
You can select a track in the folder by  
pressing the corresponding number button.  
__:__  
Select track no  
Go To Sppeakeerr Setupp Page  
26  
15  
 
DVD Setup  
DVD Functions  
Stop(  
)
Show below are two examples of Audio Setups.  
[DVD]/[AUDIO]  
OSD  
CONDITION  
Stop  
In DVD mode, Press STOP to stop playback.  
To resume playback, press PLAY/PAUSE. If  
you press STOP and then PLAY/PAUSE twice,  
the player will begin playback at the first  
scene of the movie.  
1 Time Press Play Key To Continue  
2 Time  
Disc Stop  
1. Dolby Digital Setup  
[MP3]  
OSD  
CONDITION  
In MP3 mode, Pressing STOP will stop the  
audio playback. Press PLAY/PAUSE to begin  
playback of the first title on the disc.  
Audio Setuup Page  
Dolby Digiital SSetup  
1 Time  
Stop  
Stop  
Speaker SSetup  
SPDIFF Setup  
Dual Mono  
Dynamic  
STR  
Stereo  
L-Mono  
R-Mono  
Mix-Mono  
Dolbyy Digiital Setup  
Channeel Delay  
Equalizer  
3D Proceessing  
Arrows( / / /  
[DVD]  
In addition to navigating the various menus, you can use the arrow buttons to define the area  
)
Go To Doolby Diigitall Setup  
Dual Mono (11 + 1) SSetup  
of the screen you want to enlarge in ZOOM mode.  
Dual Mono  
Use this function to set the input audio  
signal to match your speaker setup.  
Dynamic  
Use this function to change the setting  
from the factory.  
[MP3]  
After pressing STOP button, select the desired folder and set the condition by pressing  
ENTER button.  
Dolby Digiital SSetup  
Dolby Digiital SSetup  
FULL  
Dual Mono  
Dynamic  
STR  
Dual Mono  
Dynamic  
Stereo  
STR  
L-Mono  
R-Mono  
Mix-Mono  
Setup  
3 / 4  
1 / 2  
1 / 4  
OFF  
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD  
settings to suit your equipment and preferences.  
Set DRC Off  
Set Stereeo Setup  
Menu  
[DVD]  
2. Equalizer Settings  
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,  
depending on the programming of the disc.  
Audio Setuup Page  
Equalizer Page  
Speaker SSetup  
Spdiff Setup  
EQ Type  
None  
None  
Rock  
Pop  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
Dolbyy Digiital Setup  
Channeel Delay  
Equalizer  
Live  
Dance  
Techno  
Classic  
Soft  
3D Proceessing  
Go To Equallizerr Page  
Select Equallizerr Type  
25  
16  
 
DVD Functions  
DVD Setup  
EQ Equalizer Type  
In this menu you can choose the desired preset  
equalizer mode.  
Eject  
Equalizer Page  
EQ Type None  
None  
Rock  
Pop  
When this button is pressed, the disc is ejected. When this button is pressed for more  
than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter  
difficultly ejecting a disc.  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
(Choose from Rock, Pop, Live, Dance, Techno,  
Classic or Soft)  
Live  
Dance  
Techno  
Classic  
Soft  
Vol+/Vol-  
Select Equallizerr Type  
Use these buttons to adjust the audio output level of the speaker from 0 to 100.  
Bass Boost  
The Bass Boost function increases the volume  
level of the bass frequencies.  
Equalizer Page  
Mute  
EQ Type  
None  
Off  
Off  
Bass Boost  
Super Bass  
Treble Boost  
On  
Off  
Off  
OSD  
CONDITION  
Mute  
Press MUTE to turn off the audio part of the  
currently playing program. Press it again to  
return the audio volume to the level at which  
you were last listening.  
Mute  
Mute off  
Mute off  
Boss Boost  
Play or Pause(  
)
Super Bass  
Super Bass Boost further increases the volume  
level of the bass frequencies.  
Equalizer Page  
EQ Type None  
OSD  
CONDITION  
Play Disc  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
Whenever this button is pressed, the mode  
switches from pause to play or play to pause.  
On  
Off  
Pause  
Super Bass  
Audio  
[DVD]  
OSD  
CONDITION  
2 Channel  
Treble Boost  
Treble Boost increases the volume level of the upper  
frequencies.  
Equalizer Page  
EQ Type None  
Change the audio output format.  
(Available only if the disc supports available audio  
type.)  
1 / 2 : Ac3 2CH English  
2 / 2 : Ac3 5.1CH English  
5.1 Channel  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
On  
Off  
OSD  
Stereo  
CONDITION  
Stereo  
[VCD]/[AUDIO]  
Changes the audio output format.  
(Available only of the disc supports available audio  
type.)  
Mono Left  
Mono Right  
Mix Mono  
Mono Left  
Mono Right  
Mix Mono  
Treble Boost  
[MP3]  
An invalid button press.  
24  
17  
 
DVD Setup  
DVD Setup  
Video Setup  
Picture Quality  
Password Setup  
1. Password Mode  
In the Video Setup, you can make adjustments to various elements of the picture quality.  
Password Setup, which is required for using the Parental Controls settings,  
is divided into two modules: Turning on the Password function, and setting  
a Password. The first step is to turn it on in the Password Mode setting.  
Video Settup Page  
Video Quallity SSetup  
Component  
Quality  
YUV  
Color  
MID  
00  
00  
None  
00  
00  
High  
Medium  
Low  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
Divx VOD  
Password Setup Page  
Password Mode On  
Password  
On  
Off  
1 T  
Go TO Viddeo Quallity Settup Page  
Color  
Password Mode  
Sharpness can be adjusted by highlighting it in the menu and then using the  
UP/DOWN arrow buttons to increase or decrease the sharpness.  
2. Password Change  
In the Password setup, you must first enter the current 6-digit passcode, and  
then you have the opportunity to change it. The factory default passcode is 136900.  
Once you have changed and confirmed the password, press the ENTER button.  
Video Quallity SSetup  
Color  
MID  
00  
00  
None  
00  
00  
High  
Medium  
Low  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
1 T  
Password Setup Page  
Color  
Password Mode On  
Password  
On  
Change  
Old Password  
New Password  
Confirm PWD  
Brightness  
Use this option to adjust the display brightness. When you reach desired  
OK  
brightness level, use the  
/
buttons and press the ENTER button.  
Change Passsword  
Please Ennter OOlld Passsword  
Video Quallity SSetup  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
0
Brightness  
1 T  
Brightness  
Brightness  
18  
23  
 
DVD Setup  
DVD Setup  
5. Disc Menu  
Use the Disc Menu option to select the display  
language for a DVDs disc menu display language.  
(not the same as the players menu)  
Contrast  
Use this option to adjust the contrast level.  
Preference Page  
English  
French  
Spanish  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
Use the  
/
buttons and press the ENTER button, when you reach the  
desired contrast level. The contrast control increases or decreases the ratio of  
bright and dark screen sections.  
1. Press the SETUP button during stop mode.  
Subtitle  
Disc Menu  
Parental  
Default  
Chinese  
Japanese  
Korean  
Russian  
Thai  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Disc Menu.  
ENG  
4. Press the ENTER button.  
5. Press the  
/
buttons to select Disc Menu.  
Video Quallity SSetup  
Preferrred Meenu Lannguage  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
6. Parental  
Contrast  
0
The Parental Control settings limit the player to only play content at or below a certain  
movie rating. The ratings systems in different countries vary. In the USA, the Motion  
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.  
In this menu item, you can set what is the highest level of rating you wish to allow the  
unit to play.  
1 T  
Contrast  
Contrast  
1. Press the SETUP button when stop mode.  
Preference Page  
Gamma  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Parental.  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
1 KID SAF  
2 G  
3 PG  
In some systems, you might experience a loss in the strength of the dark sections of  
the displayed picture. This can be helped by changing the Gamma setting, which  
boosts the dark level but leaves the other levels unchanged.  
4. Press the ENTER button.  
5. Press the buttons to select desired  
parental level.  
Subtitle  
Disc Menu  
Parental  
Default  
4 PG 13  
5 PGR  
6 R  
7 NC17  
8 ADULT  
ENG  
/
Video Quallity SSetup  
7. Default  
Set Parentaal Conntrol  
Color  
MID  
00  
00  
None  
00  
00  
If you select RESET when in the DEFAULT settings  
mode, all the settings of the Setup Menu will be  
returned to the factory defaut settings, except for  
Parental Level, Region and Password values.  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
High  
Medium  
Low  
None  
1 T  
Preference Page  
TV Type  
PBC  
Audio  
Subtitle  
Disc Menu  
Parental  
Default  
Ntsc  
On  
ENG  
Gamma  
1. Press the SETUP button when stop mode.  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Default.  
ENG  
Hue  
Select screen hue level using the direction  
4. Press the ENTER button to select Reset.  
Reset  
/
buttons and press the ENTER button.  
Load Faactorry Setting  
Video Quallity SSetup  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
Hue  
0
1 T  
Hue  
Hue  
22  
19  
 
DVD Setup  
DVD Setup  
Preference  
1. TV Type  
Choose the proper TV format appropriate to the  
monitor you have connected to the player from  
the following: NTSC, PAL or Multi type.  
Saturation  
Select screen saturation level using the direction  
ENTER button.  
/
buttons and press the  
Preference Page  
Video Quallity SSetup  
TV Type  
PBC  
Audio  
Subtitle  
Disc Menu  
Parental  
Default  
Ntsc  
On  
ENG  
PAL  
Multi  
NTSC  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
1. Press the SETUP button during stop mode.  
Saturation  
0
ENG  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to TV Type.  
1 T  
4. Press the ENTER button.  
5. Press the buttons to select TV Type.  
/
Saturation  
Set TV Staandard  
Saturation  
2. PBC (Play Back Control)  
Luma Delay  
Select the Luma Delay menu and select the preferred video image quality.  
This feature is only available when a SVCD disc  
is loaded. It allows you to disable or enable the  
PBC (Play Back Control) menu of VCD discs.  
Preference Page  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
On  
Off  
Subtitle  
Disc Menu  
Parental  
Default  
Video Quallity SSetup  
ENG  
1. Press the SETUP button during stop mode.  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to PBC.  
4. Press the ENTER button.  
5. Press the  
Set PBC State  
1 T  
0T  
1 T  
/
buttons to select TV TypeOn/Off.  
Luma Delay  
3. Audio  
Use the audio language menu to select the subtitle  
language that you prefer. If the disc you are playing  
has that language available, it will display subtitles  
in that language.  
Preference Page  
English  
French  
Spanish  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
Subtitle  
Disc Menu  
Parental  
Default  
Chinese  
Japanese  
Korean  
Russian  
Thai  
ENG  
1. Press the SETUP button during stop mode.  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Audio.  
4. Press the ENTER button.  
5. Press the buttons to select desired  
audio language.  
Preferrred Auuddio Lannguage  
/
4. Subtitle  
In the Subtitle menu, you can select a subtitle  
language. Please note that subtitle will only  
appear in this language if the disc programming  
has included it.  
Preference Page  
TV Type  
PBC  
Audio  
French  
Spanish  
Ntsc  
On  
ENG  
Chinese  
Japanese  
Korean  
Russian  
Thai  
Subtitle  
Disc Menu  
Parental  
Default  
1. Press the SETUP button during stop mode.  
ENG  
2. Press the  
3. Press the  
4. Press the ENTER button.  
/
buttons to move to Preference.  
/
buttons to move to Subtitle.  
Others  
5. Press the  
subtitle.  
/
buttons to select desired  
Preferrred Subttitle Laanguage  
20  
21  
 

Sharp Toaster KZ 2S01W User Manual
SIIG TV Mount 04 0676A User Manual
Silvercrest Hot Beverage Maker SWKG 3000 A1 User Manual
Sony All in One Printer HK PSU01 User Manual
Sony Camcorder Accessories HVR MRC1 User Manual
Sony Car Stereo System MEX DV1100 User Manual
Sony MiniDisc Player MZ R700DPC User Manual
Sony Stereo System CMT A70 User Manual
SRS Labs Stereo Amplifier Lock In Amplifier User Manual
Sylvania DVD Recorder DVR90DEA User Manual