Sony Tablet Accessory VGP BMS33 User Manual

*1 Communication range will vary according to whether walls or other  
obstacles are located between devices, the material used in walls, the  
presence of radio frequency interference and other environmental  
conditions, and the type of software being used.  
• VAIO and  
are trademarks of Sony Corporation.  
6
Press the CONNECT button on the bottom of the mouse.  
The low battery lamp flashes green.  
• Microsoft, Windows, and Windows Vista are registered trademarks or  
trademarks of Microsoft Corporation in the United States and/or other  
countries.  
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and  
any use of such marks by Sony Corporation is under license. Other  
trademarks and Trade names are those of their respective owners.  
Design and specifications are subject to change without notice.  
• All other names of systems, products, and services are trademarks of their  
respective owners. In this manual, the ™ or ® marks are not specified.  
Bluetooth® Laser Mouse  
VGP-BMS33  
• In this manual, Microsoft® Windows® XP Home Edition and Microsoft®  
Troubleshooting  
Windows® XP Professional are referred to as Windows XP.  
If you experience any of the following difficulties while using the mouse,  
use this troubleshooting guide to solve the problem. If a problem persists,  
consult your nearest Sony dealer.  
• In this manual, Microsoft® Windows Vista™ Home Basic, Microsoft®  
Windows Vista™ Home Premium, Microsoft® Windows Vista™ Business and  
Microsoft® Windows Vista™ Ultimate are referred to as Windows Vista.  
Low battery lamp  
Operating Instructions  
Mode d’emploi  
7
8
Select “Express Mode”, and click “Next”.  
Search for Bluetooth devices begins.  
The mouse does not turn on when I set the power switch to ON.  
Your personal computer is in power-saving mode or is not turned on.  
c Unless your personal computer is turned on and not running in power-  
saving mode, the mouse will not turn on, even when the power switch is  
set to ON. To turn the mouse on, set the power switch on the mouse to  
ON, and press the CONNECT button once.  
In the device list, select “VGP-BMS33”, and click “Next”.  
When your personal computer is pre-installed with Windows  
Vista:  
The “Add New Connection Wizard” screen disappears. Try moving  
the mouse. If the pointer displayed on your screen moves in the same  
direction, the connection is complete.  
Before Use  
3-095-039-11(1)  
© 2007 Sony Corporation Printed in Japan  
This product is a laser mouse equipped with Bluetooth* technology.  
The Bluetooth® Laser Mouse can be used with the following personal  
computers (as of January 2007):  
Other mouse buttons are being pressed while the power switch is set to  
ON.  
c If the power switch is set to ON while other mouse buttons are being  
pressed, the mouse will not turn on. Be sure not to press any other  
buttons when setting the power switch to ON.  
English  
• Sony VAIO personal computers equipped with Bluetooth technology and  
pre-installed with Microsoft® Windows® XP Professional, Microsoft®  
Windows® XP Home Edition, or Microsoft® Windows Vista™.  
(SP2 must be installed on your personal computer if it is  
pre-installed with Windows XP.)  
When your personal computer is pre-installed with Windows XP:  
Go to step 9.  
Nothing happens when I press a mouse button.  
WARNING  
To prevent fire or shock hazard, do not expose the unit  
to rain or moisture.  
9
Click “OK” at the prompt to connect the HID device.  
The software is not compatible.  
10 Verify the contents of the window displayed, and click  
c Use a supported software.  
* Bluetooth® technology  
Bluetooth wireless technology provides instant short-range connectivity  
without the need for cumbersome cabling. For details, refer to the  
manuals included with your personal computer.  
“Next”.  
The mouse batteries are exhausted.  
c Replace the batteries. For details, see “Inserting Batteries into the Mouse”.  
11 Click “Finish”.  
Owner’s Record  
The mouse and the personal computer are not communicating.  
c Perform the steps in “Enabling Communication between the Mouse and  
Your Personal Computer” to ensure that proper communication is  
possible.  
The model number and the serial number are located inside the battery  
compartment of the mouse. Record the serial number in the space provided  
below. Refer to this number whenever you call your Sony dealer regarding this  
product.  
Try moving the mouse. If the pointer displayed on your screen moves  
in the same direction, the connection is complete.  
Note  
Disconnecting  
Right click the headset icon displayed in the “Bluetooth Settings” screen,  
and click “Disconnect” in the displayed menu.  
Depending on the personal computer or version of software you are using, the  
mouse may not operate correctly.  
Consult your nearest Sony dealer about proper operating environments and  
information about Sony VAIO and Bluetooth compatibility.  
c Turn off the mouse, wait a few seconds, turn on the mouse, and then  
reestablish communication.  
Model No. VGP-BMS33  
Serial No. ____________________  
c In some operating environments, the usable distance may be notably  
shorter, preventing normal operation. In such case, use the mouse farther  
away from other electronic devices such as other computers and displays.  
c If the mouse is too far from your personal computer, communication is  
not possible. Bring the mouse and your personal computer closer  
together.  
Operating distance of the mouse  
For customers in the U.S.A.  
The mouse can normally be operated within about a 32 ft. (10 m) radius around  
the personal computer. Depending on the usage environment, sometimes the  
usable distance may be notably shorter, preventing normal operation.  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
Names of Parts  
The mouse is being used on an unsuitable surface.  
In such a case, take the following measures:  
c Due to the characteristics of the laser sensor, the mouse may not work  
properly on transparent surfaces or on a mouse pad that has a clear  
surface. Avoid using on such materials, or use a commercially-available  
mouse pad that is compatible with a laser sensor mouse.  
• Use the mouse as far away from other wireless devices as possible.  
• Use the mouse closer to the personal computer.  
• Use a mouse pad.  
Right button  
Power switch  
Wheel button  
CONNECT button  
The CONNECT button is pressed while operating the mouse.  
c When the CONNECT button is pressed while operating the mouse, the  
mouse goes into a standby state for about 1 minute and cannot be  
operated during this time. If you press the CONNECT button, wait a few  
minutes before beginning operation.  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
Using the Mouse  
When you move the mouse, the pointer displayed on your screen moves in  
the same direction. This section describes basic mouse operations.  
The mouse may have difficulty communicating in an environment with  
2.4 GHz wireless LAN or other Bluetooth communication.  
c It is best to use the mouse in a location with low interference from  
wireless devices.  
Lens  
Notes  
Low battery lamp  
Left button  
Pressing the CONNECT button does not establish a connection.  
• Due to the characteristics of the laser sensor, the mouse may not work  
properly on transparent surfaces or on a mouse pad that has a clear surface.  
Avoid using on such materials, or use a commercially-available mouse pad  
that is compatible with a laser sensor mouse.  
• The fluoropolymer used for the soles of the mouse (PTFE, or  
polytetrafluoroethylene) is designed for low frictional resistance, but the  
mouse may slide differently depending on what material your desk or  
mousepad is made of.  
You are cautioned that any changes or modifications not expressly approved in  
this manual could void your authority to operate this equipment.  
c Check whether batteries are inserted in the mouse. For details, see  
“Inserting Batteries into the Mouse”.  
For questions regarding your product or for the Sony Service Center nearest you,  
call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.  
c If the power switch on the mouse is set to OFF, communication with  
the personal computer is not possible. Check the power switch setting  
on the bottom of the mouse.  
Inserting Batteries into the  
Mouse  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
c If the power does not come on when the power switch is set to ON, the  
batteries may be exhausted. Under normal operating conditions, a set  
of alkaline batteries lasts about three months. Replace the batteries. For  
details, see “Inserting Batteries into the Mouse”.  
1
Set the power switch located on the bottom of the  
mouse to OFF.  
z
If necessary, you can adjust the mouse pointer speed under “Mouse Properties”. To  
display “Mouse Properties”, with the Windows Vista operating system, double-  
click “Mouse” in the “Control Panel” (with the Windows XP operating system,  
select “Printers and Other Hardware” in the “Control Panel”, then select “Mouse”).  
FCC Radiation Exposure Statement:  
c Communication between the mouse and your personal computer may  
not have been properly established. If the CONNECT button on the  
mouse is not pressed within 30 seconds after the Bluetooth device  
search begins, mouse communication is canceled. In such a case,  
perform the procedure again to enable communication. For details, see  
“Enabling Communication between the Mouse and Your Personal  
Computer”.  
2
Open the battery compartment cover.  
These products comply with FCC radiation exposure limits set forth for  
uncontrolled equipment and meet the FCC radio frequency (RF) Exposure  
Guidelines in Supplement C to OET65. These products have very low levels  
of RF energy that it is deemed to comply without testing of specific  
absorption ratio (SAR).  
Basic operations  
1
For customers in Canada  
This Class B digital apparatus complies with Canadian ICES-003.  
c If the mouse and personal computer are too far apart, communication  
is not possible. The maximum communication distance between the  
mouse and personal computer is about 32 ft. (10m). If used on a metal  
table or if obstacles lie between the mouse and personal computer, the  
usable distance may be less.  
3
Insert the two supplied IEC R6 (size AA) batteries with  
the correct + - orientation.  
Operation is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired  
operation of the device.  
3
The scrolling features do not work.  
The operating system is not compatible.  
2
c Use a supported operating system.  
To prevent radio interference to the licensed service, this device is intended  
to be operated indoors and away from windows to provide maximum  
shielding. Equipment (or its transmit antenna) that is installed outdoors is  
subject to licensing.  
The program you are using is not compatible with the scrolling  
features.  
1 Wheel button  
Use the wheel button to easily scroll up and down in a window. You can  
also use auto scroll by pressing the wheel button.  
c The scrolling features only work with programs that use a scroll function.  
c Some programs do not support the scrolling features.  
2 Left button  
IC Exposure of Humans to RF Fields  
The pointer does not move when I move the mouse.  
Usetoopensaveddocuments,picturesandotherfilesandtorunprograms.  
Most mouse functions are performed using this button.  
The installer of this radio equipment must ensure that the antenna is  
located or pointed such that it does not emit RF field in excess of Health  
Canada limits for the general population; consult Safety Code 6, obtainable  
from Health Canada’s website:  
c Processing performed by Windows or other software may temporarily  
disable the mouse. Wait a few moments for the processing to finish  
before using the mouse.  
Note  
To prevent battery fluid leaks and damage, observe the following  
precautions.  
• Insert the batteries with the correct + - orientation.  
• Do not charge dry cell batteries.  
• Do not mix old and new batteries, or batteries of a different type.  
• If the mouse has not been used for a long time, remove the batteries.  
• If a battery fluid leak occurs, carefully wipe the battery compartment,  
and insert new batteries.  
3 Right button  
Use this button to display shortcut menus that allow you to copy saved  
documents, pictures and other files, view file details, and access various  
commands and settings.  
c You may find some useful solutions in your personal computer’s  
operating instructions. Refer to the manuals provided with your  
personal computer.  
For customers in the U.S.A. and Canada  
The use of optical instruments with this product will increase eye hazard.  
The mouse batteries are exhausted.  
c If the power does not come on when the power switch is set to ON,  
replace the batteries. For details, see “Inserting Batteries into the Mouse”.  
Precautions  
The mouse is not set to ON.  
• To prevent accidental operation, be careful not to press any buttons  
when replacing the batteries.  
c Set the power switch on the bottom of the mouse to ON.  
Safety  
If any solid object or liquid falls onto the mouse, disconnect  
it and have it checked by qualified personnel before  
continuing its use.  
The mouse and your personal computer are not communicating.  
c Perform the steps in “Enabling Communication between the Mouse and  
Your Personal Computer” to ensure that proper communication is  
possible.  
Located on bottom side  
4
Close the battery compartment cover.  
Location  
Do not place the mouse in a location where it is:  
• On an unstable surface  
For customers in Europe  
Hereby, Sony, declares that this product is in compliance with the essential  
requirements and other relevant provisions of Directive 1999/5/EC.  
c In some operating environments, the usable distance may be notably  
shorter, preventing normal operation. In such case, use the mouse farther  
away from other electronic devices such as other computers and displays.  
c If the mouse is too far from your personal computer, communication is  
not possible. Bring the mouse and your personal computer closer  
together.  
• In very humid areas or where there is no ventilation  
• Subject to excessive dust  
• Subject to direct sunlight or extreme heat  
• Extremely cold  
It also complies with standard EN 60825-1, being classified as a CLASS 1  
Laser product.  
The mouse is being used on an unsuitable surface.  
Operation  
If the mouse is brought directly from a cold to a warm  
location or is placed in a very damp room, moisture may  
condense on the inside of the mouse. If this occurs, the  
mouse may not work properly.  
c Due to the characteristics of the laser sensor, the mouse may not work  
properly on transparent surfaces or on a mouse pad that has a clear  
surface. Avoid using on such materials, or use a commercially-available  
mouse pad that is compatible with a laser sensor mouse.  
z
Under normal operating conditions, a set of alkaline batteries lasts about  
three months. When cursor movement becomes sluggish and the  
communication distance between the mouse and your personal computer  
decreases, check the low battery lamp on the mouse. Replace the batteries if  
the low battery lamp is flashing red.  
In this case, wait about 30 minutes for the moisture to  
evaporate. If the mouse does not work properly after one  
hour, consult your nearest Sony dealer.  
Located on bottom side  
When I am using the mouse, the display goes dark or the personal  
computer enters power-saving mode.  
To obtain a copy of the Declaration of Conformity (DoC) to the R&TTE  
Directive, please access the following URL address.  
The personal computer enters power-saving mode even while the  
mouse is in use.  
Bluetooth communications  
c Change the power management settings for the personal computer to  
prevent it from entering power-saving mode. For details, refer to the  
manuals provided with your personal computer.  
c Touch the touchpad or press any key on the keyboard to exit power-  
saving mode.  
When not using the mouse, set the power switch to OFF. This will make the  
batteries last longer.  
• The 2.4 GHz band used by Bluetooth and wireless LAN devices is also  
used by various other devices. Bluetooth devices incorporate technology  
that minimizes interference from other devices using the same  
wavelength. However, communication speed and achievable distances  
may be reduced. Interference from other devices can also stop  
communications altogether.  
• The data transfer rate will vary depending on distance and obstacles  
between devices, device configuration, radio interference, operating  
system, software application, and so on. In some cases, communication  
may be interrupted.  
• Communication range will vary according to whether walls or other  
obstacles are located between devices, the material used in walls, the  
presence of radio frequency interference and other environmental  
conditions, and the type of software being used.  
• If wireless LAN and Bluetooth functionality are used at the same time on  
the same personal computer, communication speed may be reduced due  
to electromagnetic interference, and other unwanted effects may occur.  
Do not open wireless devices, as opening them, for whatever reason, could  
lead to damages that are not covered by the guarantee.  
Replacing the batteries  
The low battery lamp flashing red indicates that the battery life is running  
low. Replace the batteries when this occurs.  
Repair and maintenance only by authorized Sony technicians. Improper use  
and repairs can create a safety hazard.  
The personal computer does not return from Standby mode.  
c Touch the touchpad or press any key on the keyboard to exit this mode.  
The mouse pointer does not move smoothly across the screen.  
In some situations or environments, the use of Bluetooth® wireless  
technology might be restricted by the proprietor of the building or  
responsible representatives of the organization, for example onboard  
airplanes, in hospitals or in any other environment where the risk of  
interference with other devices or services is perceived or identified as  
harmful.  
If you are uncertain of the policy that applies to the use in a specific  
organisation or environment, you are encouraged to ask for authorization  
to use Bluetooth® wireless technology prior to switching it on.  
c Due to the characteristics of the laser sensor, the mouse may not work  
properly on transparent surfaces or on a mouse pad that has a clear  
surface. Avoid using on such materials, or use a commercially-available  
mouse pad that is compatible with a laser sensor mouse.  
Enabling Communication  
between the Mouse and Your  
Personal Computer  
Exiting power-saving mode with the mouse takes a long time or is not  
possible.  
c Press any key or the power button on the keyboard.  
Use the Bluetooth Utility software installed on your personal computer to  
enable communication between the mouse and your personal computer.  
Consult your physician or the manufacturer of personal medical devices  
(pacemakers, hearing aids, etc.) regarding any restrictions on the use of  
Bluetooth® wireless technology.  
The mouse does not move smoothly after returning from the power-  
saving mode.  
z Hint  
Cleaning the outside of the mouse  
Operation of the Bluetooth Utility software may vary depending on your  
personal computer. For details on how to use the software, refer to the manuals  
provided with your personal computer.  
c Deactivate the Bluetooth connection, wait a few seconds, and then  
reestablish connection.  
Clean the mouse with a soft, dry cloth or a soft cloth lightly moistened with  
a mild detergent solution. Do not use any type of abrasive pad, scouring  
powder, or solvent such as alcohol or benzine.  
Disposal of AA batteries  
• This wireless device is powered by AA batteries.  
• For installing the batteries, please refer to the “Inserting Batteries into the  
Mouse” section of this manual.  
• Do not handle damaged or leaking batteries. Dispose of promptly and  
properly.  
• Batteries may explode or leak if recharged, disposed of in fire, mixed  
with other types of battery or improperly installed.  
• Batteries used in these devices may present a fire or chemical burn  
hazard if mistreated. Do not disassemble, heat above 60°C (140°F) or  
incinerate.  
• Replace only with the same or equivalent type recommended by the  
manufacturer.  
• Keep away from children.  
The mouse is not found when the Bluetooth device search is  
performed.  
Using the Bluetooth Utility software to  
enable communication  
The mouse is unable to be detected.  
c Press the CONNECT button located on the bottom of the mouse, and  
then try the search again.  
Specifications  
Communication method  
Position tracking principle Laser sensor  
Resolution  
1
2
Turn your personal computer on.  
The power switch on the mouse is set to OFF.  
Set the power switch located on the bottom of the  
mouse to ON.  
c Check the power switch setting on the bottom of the mouse.  
Bluetooth Standard Ver. 2.0+EDR  
I am asked to input a key at the time of authentication.  
800 counts per inch  
RF 2.4 GHz (Bluetooth)  
3 V DC (two alkaline IEC R6 [size AA]  
batteries)  
32 ft. (10 m) max. line of sight*1  
Approx. 2.1 × 1.2 × 4.9 in.  
c Input “0000” as the key.  
Frequency band  
Power requirements  
Transmission distance  
Dimensions  
• Dispose of properly at end-of-life.  
(53.4 × 31.5 × 124.6 mm) (w × h × d)  
Approx. 3.9 oz. (110 g) (including batteries)  
Sony VAIO personal computers with the  
Windows XP or Windows Vista operating  
system  
41°F to 95°F (5°C to 35°C)  
(temperature gradient less than 18°F (10°C)/  
hour)  
20% to 80% (not condensed), provided that  
humidity is less than 65% at 95°F (35°C)  
(hygrometer reading of less than 84°F (29°C))  
–4°F to 140°F (–20°C to 60°C)  
(temperature gradient less than 18°F (10°C)/  
hour)  
10% to 90% (not condensed), provided that  
humidity is less than 20% at 140°F (60°C)  
(hygrometer reading of less than 95°F (35°C)  
Alkaline IEC R6 (size AA) batteries (2)  
Operating Instructions (this document) (1)  
Warranty Card (1)  
• In some areas, the disposal of batteries in household or business waste  
may be prohibited. Please use the appropriate public collection system.  
Mass  
Supported models  
Disposal of Old Electrical & Electronic Equipment  
(Applicable in the European Union and other European  
3
4
Activate the wireless function on your personal  
computer.  
For details, refer to the operating instructions and manuals provided  
with your personal computer.  
countries with separate collection systems)  
This symbol on the product or on its packaging indicates that  
this product shall not be treated as household waste. Instead it  
shall be handed over to the applicable collection point for the  
recycling of electrical and electronic equipment. By ensuring  
this product is disposed of correctly, you will help prevent  
potential negative consequences for the environment and  
human health, which could otherwise be caused by  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Accessories  
Double-click the  
icon in the notification area on the  
bottom right corner of your personal computer’s  
desktop.  
The Bluetooth Utilities software starts up, and the “Bluetooth Settings”  
screen displays.  
inappropriate waste handling of this product. The recycling of  
materials will help to conserve natural resources. For more  
detailed information about recycling of this product, please  
contact your local Civic Office, your household waste disposal  
service or the shop where you purchased the product.  
5
Click “New Connection”.  
The “Add New Connection Wizard” screen appears.  
Printed on 70% or more recycled paper using VOC (Volatile  
Organic Compound)-free vegetable oil based ink.  
Imprimé sur papier recyclé à 70% ou plus avec de l’encre à  
base d’huile végétale sans COV (composés organiques volatils).  
 

Smooth Fitness Treadmill 425 User Manual
Snapper Edger ET 200 User Manual
Snapper Lawn Mower 1 6607 User Manual
Sony Camera Accessories VF 74CP User Manual
Sony DVD VCR Combo RDR VX500 User Manual
Sony TV Video Accessories 3 291 730 311 User Manual
Speco Technologies Security Camera CVC 6405DC User Manual
SUPER MICRO Computer Server 5017C MTF User Manual
Sylvania MP3 Player SMP1036 User Manual
T+A Elektroakustik DVD Player 1235 R User Manual