Sony Speaker System CMT SE1 User Manual
4-249-164-11(1)  
Micro Hi-Fi  
Component  
System  
Operating Instructions  
CMT-SE1  
©2003 Sony Corporation  
 
Table of Contents  
How to use this manual...........................2  
Optional Components  
Getting Started  
Hooking up optional components......... 14  
Listening to audio from a connected  
component...................................... 15  
Recording on a connected  
Hooking up the system............................4  
Setting the clock......................................5  
component...................................... 15  
CD – Play  
Loading a disc.........................................6  
Playing a disc ..........................................6  
— Normal Play/Shuffle Play  
Playing repeatedly...................................7  
— Repeat Play  
Troubleshooting  
Problems and remedies......................... 16  
Messages............................................... 18  
Additional Information  
Creating your own program....................7  
— Program Play  
Precautions............................................ 19  
Specifications........................................ 20  
List of button locations and reference  
pages............................................... 22  
Tuner  
Presetting radio stations ..........................8  
Listening to the radio ..............................9  
— Preset Tuning  
— Manual Tuning  
Using the Radio Data System  
(RDS)..............................................10  
Sound Adjustment  
Adjusting the sound ..............................11  
Timer  
Falling asleep to music..........................11  
— Sleep Timer  
Waking up to music ..............................12  
— Daily Timer  
Display  
Turning off the display..........................13  
— Power Saving Mode  
Viewing information about the disc in the  
display.............................................13  
3GB  
 
Getting Started  
Hooking up the system  
Perform the following procedures 1 to 3 to hook up your system using the supplied cords and  
accessories.  
AM loop antenna  
FM lead antenna  
Right speaker  
Left speaker  
1
2
3
1 Connect the speakers.  
Connect the right and left speaker cords to  
the SPEAKER terminals as shown below.  
L
IA  
X
A
O
C
M
A
Ω
4
SE  
L
U
E
C
M
F
AN  
PED  
AM loop antenna  
Ω
IM  
75  
R
R
AKE  
Extend the FM lead antenna horizontally  
PE  
S
Note  
To prevent noise pickup, keep the antennas away from  
the system and other components.  
2 Connect the FM and AM antennas.  
Set up the AM loop antenna, then connect  
it.  
3 Connect the mains lead to mains.  
If the plug does not fit the wall socket,  
detach the supplied plug adaptor (only for  
models equipped with an adaptor).  
To turn on the system, press ?/1.  
4GB  
 
         
Attaching the speaker pads  
Setting the clock  
Attach the supplied speaker pads to the bottom  
of the speakers to stabilize the speakers and  
prevent them from slipping.  
1
2
3
Press ?/1 to turn on the system.  
Press CLOCK/TIMER SET.  
Press . or > repeatedly to set the  
hour.  
4
5
Press ENTER.  
Press . or > repeatedly to set the  
minute.  
6
Press ENTER.  
The clock starts working.  
Inserting two R6 (size AA)  
batteries into the remote  
To adjust the clock  
1 Press CLOCK/TIMER SET.  
2 Press . or > until “CLOCK SET?”  
appears, then press ENTER.  
3 Do the same procedures as step 3 to 6  
above.  
e
Note  
E
E
The clock is not displayed in Power Saving Mode.  
e
Tip  
When you adjust the clock while the system is off, do  
Note  
the same procedures as step 2 to 6 above.  
If you do not use the remote for a long period of time,  
remove the batteries to avoid possible damage from  
battery leakage and corrosion.  
Tip  
When the remote no longer operates the system,  
replace both batteries with new ones.  
Opening the front cover  
Pull down the upper right corner of the front  
cover on the unit.  
Front cover  
5GB