Sony Home Theater System BDV EF1100 User Manual

4-446-737-11(1)

Blu-ray Disc™/

DVD Home Theatre

System

Operating Instructions

BDV-EF1100

Europe Only

Notice for customers: the following

information is only applicable to equipment

sold in countries applying EU directives.

This product has been manufactured by or on

behalf of Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan. Inquiries

related to product compliance based on

European Union legislation shall be addressed

to the authorized representative, Sony

Deutschland GmbH, Hedelfinger Strasse 61,

70327 Stuttgart, Germany. For any service or

guarantee matters, please refer to the

Disposal of waste

batteries (applicable in

the European Union

and other European

countries with

separate collection

systems)

This symbol on the battery or on the

packaging indicates that the battery provided

with this product shall not be treated as

household waste.

On certain batteries this symbol might be used

in combination with a chemical symbol. The

chemical symbols for mercury (Hg) or lead

(Pb) are added if the battery contains more

than 0.0005% mercury or 0.004% lead.

By ensuring these batteries are disposed of

correctly, you will help prevent potentially

negative consequences for the environment

and human health which could otherwise be

caused by inappropriate waste handling of the

battery. The recycling of the materials will

help to conserve natural resources.

addresses provided in the separate service or

guarantee documents.

Hereby, Sony Corp., declares that this

equipment is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

For details, please access the following URL:

http://www.compliance.sony.de/

In case of products that for safety,

Precautions

performance or data integrity reasons require a

permanent connection with an incorporated

battery, this battery should be replaced by

qualified service staff only.

To ensure that the battery will be treated

properly, hand over the product at end-of-life

to the applicable collection point for the

recycling of electrical and electronic

equipment.

For all other batteries, please view the section

on how to remove the battery from the product

safely. Hand the battery over to the applicable

collection point for the recycling of waste

batteries.

For more detailed information about recycling

of this product or battery, please contact your

local Civic Office, your household waste

disposal service or the shop where you

purchased the product.

This equipment has been tested and found to

comply with the limits set out in the EMC

Directive using a connection cable shorter

than 3 meters. (Europe models only)

On power sources

• The unit is not disconnected from the mains

as long as it is connected to the AC outlet,

even if the unit itself has been turned off.

• As the main plug is used to disconnect the

unit from the mains, connect the unit to an

easily accessible AC outlet. Should you

notice an abnormality in the unit, disconnect

the main plug from the AC outlet

immediately.

3^GB

• Cinavia Notice

On watching 3D video

images

This product uses Cinavia technology to

limit the use of unauthorized copies of some

commercially-produced film and videos and

their soundtracks. When a prohibited use of

an unauthorized copy is detected, a message

will be displayed and playback or copying

will be interrupted.

More information about Cinavia technology

is provided at the Cinavia Online Consumer

Information Center at

http://www.cinavia.com. To request

additional information about Cinavia by

mail, send a postcard with your mailing

address to: Cinavia Consumer Information

Center, P.O. Box 86851, San Diego, CA,

92138, USA.

Some people may experience discomfort

(such as eye strain, fatigue, or nausea) while

watching 3D video images. Sony recommends

that all viewers take regular breaks while

watching 3D video images. The length and

frequency of necessary breaks will vary from

person to person. You must decide what works

best. If you experience any discomfort, you

should stop watching the 3D video images

until the discomfort ends; consult a doctor if

you believe necessary. You should also

review (i) the instruction manual and/or the

caution message of any other device used

with, or Blu-ray Disc contents played with this

product and (ii) our website

(http://esupport.sony.com/) for the latest

information. The vision of young children

(especially those under six years old) is still

under development. Consult your doctor (such

as a pediatrician or eye doctor) before

allowing young children to watch 3D video

images.

Adults should supervise young children to

ensure they follow the recommendations

listed above.

Copyrights and Trademarks

• This system incorporates with Dolby*

Digital and the DTS** Digital Surround

System.

* Manufactured under license from

Dolby Laboratories. Dolby and the

double-D symbol are trademarks of

Dolby Laboratories.

**Manufactured under license under

U.S. Patent Nos: 5,956,674;

Copy Protection

5,974,380; 6,226,616; 6,487,535;

7,212,872; 7,333,929; 7,392,195;

7,272,567 & other U.S. and worldwide

patents issued & pending. DTS-HD,

the Symbol, & DTS-HD and the

Symbol together are registered

trademarks of DTS, Inc. Product

includes software. © DTS, Inc. All

Rights Reserved.

• Please be advised of the advanced content

protection systems used in both Blu-ray Disc

and DVD media. These systems, called

AACS (Advanced Access Content System)

and CSS (Content Scramble System), may

contain some restrictions on playback,

analog output, and other similar features.

The operation of this product and the

• This system incorporates High-Definition

restrictions placed may vary depending on

the date of purchase, as the governing board

of the AACS may adopt or change its

restriction rules after the time of purchase.

Multimedia Interface (HDMI

technology.

)

The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the

United States and other countries.

• Java is a trademark of Oracle and/or its

affiliates.

4^GB

• “DVD logo” is a trademark of DVD Format/

Logo Licensing Corporation.

• Wi-Fi , Wi-Fi Protected Access and Wi-Fi

Alliance are registered marks of the Wi-Fi

Alliance.

• “Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”,

“BD-LIVE”, “BONUSVIEW”, and logos

are trademarks of the Blu-ray Disc

Association.

• Wi-Fi CERTIFIED™, WPA™, WPA2™

and Wi-Fi Protected Setup™ are marks of

the Wi-Fi Alliance.

• “Blu-ray Disc”, “DVD+RW”, “DVD-RW”,

“DVD+R”, “DVD-R”, “DVD VIDEO”, and

“CD” logos are trademarks.

• The N Mark is a trademark or registered

trademark of NFC Forum, Inc. in the United

States and in other countries.

• “BRAVIA” is a trademark of Sony

Corporation.

• Android is a trademark of Google Inc.

• The Bluetooth word mark and logos are

• “AVCHD 3D/Progressive” and the

“AVCHD 3D/Progressive” logo are

trademarks of Panasonic Corporation and

Sony Corporation.

registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Sony

Corporation is under license. Other

trademarks and trade names are those of their

respective owners.

• MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

• This product incorporates proprietary

technology under license from Verance

Corporation and is protected by U.S. Patent

7,369,677 and other U.S. and worldwide

patents issued and pending as well as

certain aspects of such technology. Cinavia

is a trademark of Verance Corporation.

engineering or disassembly is prohibited.

•

, “XMB”, and “xross media bar” are

trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

• “PlayStation” is a registered trademark of

Sony Computer Entertainment Inc.

• “Sony Entertainment Network logo” and

“Sony Entertainment Network” are

trademarks of Sony Corporation.

• Music and video recognition technology and

related data are provided by Gracenote .

Gracenote is the industry standard in music

recognition technology and related content

delivery. For more information, please visit

www.gracenote.com.

CD, DVD, Blu-ray Disc, and music and

video-related data from Gracenote, Inc.,

present Gracenote. One or more patents

owned by Gracenote apply to this product

and service. See the Gracenote website for a

nonexhaustive list of applicable Gracenote

patents. Gracenote, CDDB, MusicID,

MediaVOCS, the Gracenote logo and

logotype, and the “Powered by Gracenote”

logo are either a registered trademark or a

trademark of Gracenote, Inc. in the United

States and/or other countries.

5^GB

• Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or other

countries.

End User License

Information

Gracenote End User License

This product is protected by certain

intellectual property rights of Microsoft

Corporation. Use or distribution of such

technology outside of this product is

prohibited without a license from Microsoft

or an authorized Microsoft subsidiary.

Agreement

This application or device contains software

from Gracenote, Inc. of Emeryville, California

(“Gracenote”). The software from Gracenote

(the “Gracenote Software”) enables this

application to perform disc and/or file

identification and obtain music-related

information, including name, artist, track, and

title information (“Gracenote Data”) from

online servers or embedded databases

(collectively, “Gracenote Servers”) and to

perform other functions. You may use

Gracenote Data only by means of the intended

End-User functions of this application or

device.

Content owners use Microsoft

PlayReady™ content access technology to

protect their intellectual property, including

copyrighted content. This device uses

PlayReady technology to access PlayReady-

protected content and/or WMDRM-

protected content. If the device fails to

properly enforce restrictions on content

usage, content owners may require

Microsoft to revoke the device’s ability to

consume PlayReady-protected content.

Revocation should not affect unprotected

content or content protected by other content

access technologies. Content owners may

require you to upgrade PlayReady to access

their content. If you decline an upgrade, you

will not be able to access content that

requires the upgrade.

You agree that you will use Gracenote Data,

the Gracenote Software, and Gracenote

Servers for your own personal non-

commercial use only. You agree not to assign,

copy, transfer or transmit the Gracenote

Software or any Gracenote Data to any third

party. YOU AGREE NOT TO USE OR

EXPLOIT GRACENOTE DATA, THE

GRACENOTE SOFTWARE, OR

• DLNA™, the DLNA Logo and DLNA

CERTIFIED™ are trademarks, service

marks, or certification marks of the Digital

Living Network Alliance.

• Opera Devices SDK from Opera Software

GRACENOTE SERVERS, EXCEPT AS

EXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive license to

use the Gracenote Data, the Gracenote

Software, and Gracenote Servers will

terminate if you violate these restrictions. If

your license terminates, you agree to cease

any and all use of the Gracenote Data, the

Gracenote Software, and Gracenote Servers.

Gracenote reserves all rights in Gracenote

Data, the Gracenote Software, and the

Gracenote Servers, including all ownership

rights. Under no circumstances will Gracenote

become liable for any payment to you for any

information that you provide. You agree that

Gracenote, Inc. may enforce its rights under

this Agreement against you directly in its own

name.

• All other trademarks are trademarks of their

respective owners.

• Other system and product names are

generally trademarks or registered

trademarks of the manufacturers. ™ and ®

marks are not indicated in this document.

6^GB

The Gracenote service uses a unique identifier

to track queries for statistical purposes. The

purpose of a randomly assigned numeric

identifier is to allow the Gracenote service to

count queries without knowing anything about

who you are. For more information, see the

web page for the Gracenote Privacy Policy for

the Gracenote service.

The Gracenote Software and each item of

Gracenote Data are licensed to you “AS IS.”

Gracenote makes no representations or

warranties, express or implied, regarding the

accuracy of any Gracenote Data from in the

Gracenote Servers. Gracenote reserves the

right to delete data from the Gracenote Servers

or to change data categories for any cause that

Gracenote deems sufficient. No warranty is

made that the Gracenote Software or

Gracenote Servers are error-free or that

functioning of Gracenote Software or

Gracenote Servers will be uninterrupted.

Gracenote is not obligated to provide you with

new enhanced or additional data types or

categories that Gracenote may provide in the

future and is free to discontinue its services at

any time.

About These Operating

Instructions

• The instructions in these Operating

Instructions describe the controls on the

remote control. You can also use the controls

on the unit if they have the same or similar

names as those on the remote control.

• In this manual, “disc” is used as a general

reference for BDs, DVDs, or CDs unless

otherwise specified by the text or

illustrations.

• Some illustrations are presented as

conceptual drawings, and may be different

from the actual products.

• The items displayed on the TV screen may

vary depending on the area.

• The default setting is underlined.

GRACENOTE DISCLAIMS ALL

WARRANTIES EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO,

IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, TITLE, AND

NON-INFRINGEMENT. GRACENOTE

DOES NOT WARRANT THE RESULTS

THAT WILL BE OBTAINED BY YOUR

USE OF THE GRACENOTE SOFTWARE

OR ANY GRACENOTE SERVER. IN NO

CASE WILL GRACENOTE BE LIABLE

FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES OR FOR ANY

LOST PROFITS OR LOST REVENUES.

7^GB

Table of Contents

About These Operating Instructions .... 7

Unpacking ............................................ 9

Guide to Parts and Controls ............... 10

Tuner

Listening to the Radio ........................ 35

Receiving Radio Data System

(RDS) .......................................... 37

Getting Started

Step 1: Installing the

Speakers .............................. 14

Step 2: Connecting the

Other Operations

Using the Control for HDMI Function

for “BRAVIA” Sync ................... 37

Setting the Speakers ........................... 38

Using the Sleep Timer ........................ 39

Deactivating the Buttons on the

Unit ............................................. 40

Controlling Your TV with the

Supplied Remote Control ............ 40

Saving Power in Standby Mode ......... 40

Browsing Websites ............................ 41

System ................................. 15

Connecting the speakers ....... 15

Connecting the TV .................. 16

Connecting the other

equipment

(Set-top box, etc.) ............... 16

Connecting the antenna

(aerial) ................................. 18

Step 3: Preparing for Network

Connection .......................... 18

Step 4: Performing the Easy

Setup .................................... 20

Step 5: Selecting the Playback

Source .................................. 21

Step 6: Enjoying Surround

Sound ................................... 21

Settings and

Adjustments

Using the Setup Display ..................... 43

[Network Update] .............................. 43

[Screen Settings] ................................ 44

[Audio Settings] ................................. 45

[BD/DVD Viewing Settings] ............. 46

[Parental Control Settings] ................. 47

[System Settings] ............................... 47

[Network Settings] ............................. 48

[Easy Network Settings] .................... 49

[Resetting] .......................................... 49

Playback

Playing a Disc .................................... 23

Playing from a USB Device ............... 25

Enjoying music from a Bluetooth

device .......................................... 25

Connecting to a smartphone by

Additional Information

One-touch listening function

Precautions ......................................... 50

Notes about Discs ............................... 52

Troubleshooting ................................. 53

Playable Discs .................................... 58

Playable Types of Files ...................... 59

Supported Audio Formats .................. 60

Specifications ..................................... 61

Language Code List ........................... 63

Index ................................................... 65

(NFC) .......................................... 27

Playing via a Network ........................ 29

Available Options .............................. 32

Sound Adjustment

Selecting the Audio Format,

Multilingual Tracks, or

Channel ....................................... 34

Enjoying Multiplex Broadcast

Sound .......................................... 35

8^GB

Unpacking

• Quick Setup Guide

• Reference Guide

• Remote control (1)

• R6 (size AA) batteries (2)

• FM wire antenna (aerial) (1)

• Front speakers (2)

• Subwoofer (1)

9^GB

Guide to Parts and Controls

For more information, refer to the pages indicated in parentheses.

Front panel

A "/1 (on/standby)

Note

Turns on the unit, or sets it to standby

mode.

During the demonstration, the volume

level may be higher than the volume level

you have set.

B Disc tray (page 23)

(USB) port (page 25)

(remote control sensor)

(N-Mark) (page 28)

Position the NFC-compatible device

near this indication to activate the NFC

function.

G Front panel display

H LED indicator

D Play operation buttons

White: Lights up when the unit is

turned on.

Blue (for Bluetooth status):

– System is ready for pairing: Flashes

quickly

– During pairing: Flashes quickly

– During connection: Flashes

– Connection is established: Lights up

Z (open/close)

^{a) b)}(play)

^b)(stop)

VOL +/–^a)

./> (previous/next)

FUNCTION (page 21)

Selects the playback source.

N and VOL + buttons have a tactile dot.

Use the tactile dot as a reference when

operating the unit.

Hold down N on the unit for more than

2 seconds, the built-in sound

demonstration will be played back on the

system. Press x to stop the demonstration.

10^GB

Indicators in the front panel display

A Lights up when stereo sound is

F Displays the system’s status,

received. (Radio only)

such as radio frequency, etc.

When you press DISPLAY, the stream

information/decoding status is

displayed when the function is set to

“TV”.

The stream information/decoding

status may not appear depending on

the stream or item being decoded.

B Lights up when repeat play is

activated.

C Lights up when the system is

playing via the PARTY

STREAMING function.

D Lights up when muting is on.

E Lights up when the HDMI (OUT)

jack is correctly connected to an

HDCP (High-bandwidth Digital

Content Protection) compliant

equipment with HDMI or DVI

Note

When the [Main Unit illumination] is set to

[Auto] in [System Settings], the front panel

display lights off if you do not operate the unit for

about 10 seconds.

(Digital Visual Interface) input.

Rear panel

SPEAKERS

SUBWOOFER

FRONT

A SPEAKERS jacks (page 15)

D HDMI (OUT) jack (page 16)

B TV (DIGITAL IN OPTICAL) jack

E AUDIO IN (L/R) jacks (page 17)

(page 16)

F ANTENNA (FM) terminal

C LAN (100) terminal (page 18)

(page 18)

11^GB

TV "/1 (on/standby) (page 40)

Remote control

Turns on the TV or sets it to standby

mode.

"/1 (on/standby) (pages 20, 36)

Turns on the system or sets it to

standby mode.

B Number buttons (pages 36, 40)

Enters the title/chapter numbers, preset

station number, etc.

AUDIO (page 34)

Selects the audio format/track.

SUBTITLE

Selects the subtitle language when

multilingual subtitles are recorded on a

BD-ROM/DVD VIDEO.

C Color buttons

Short cut keys for selecting items on

some BD menus (can also be used for

Java interactive operations on BDs).

D TOP MENU

Opens or closes the BD’s or DVD’s

Top Menu.

POP UP/MENU

Opens or closes the BD-ROM’s Pop-

up Menu, or the DVD’s menu.

Number 5, AUDIO, 2 +, and N buttons

have a tactile dot. Use the tactile dot as a

reference when operating the remote

control.

OPTIONS (pages 22, 32, 42)

Displays the options menu on the TV

screen or in the front panel display.

(The location differs depending on the

selected function.)

•

: For TV operations

(For details, see “Controlling Your TV

with the Supplied Remote Control”

(page 40).)

RETURN

Returns to the previous display.

A Z (open/close)

B/V/v/b

Opens or closes the disc tray.

Moves the highlight to a displayed

item.

SPEAKERS TVyAUDIO

(enter)

Enters the selected item.

Selects whether TV sound is output

from the system’s speakers or the TV’s

speaker(s). This function works only

when you set [Control for HDMI] to

[On] (page 47).

12^GB

E SOUND MODE +/– (page 21)

Selects the sound mode.

x (stop)

Stops playback and remembers the

stop point (resume point). The resume

point for a title/track is the last point

you played or the last photo for a photo

folder.

HOME (pages 20, 38, 43)

Enters or exits the system’s home

menu.

MUSIC EQ

Selects the pre-programmed equalizer

when listening to music.

Stops the built-in sound

demonstration.

Radio operation buttons

See “Tuner” (page 35).

PRESET +/–

SEN

Accesses the “Sony Entertainment

Network™” online service.

TUNING +/–

F Playback operation buttons

See “Playback” (page 23).

(muting)

./> (previous/next)

Selects the previous/next chapter,

track, or file.

Turns off the sound temporarily.

2 (volume) +/–

Adjusts the volume.

TV 2 (volume) +/–

Adjusts the TV volume.

TV t (TV input)

Switches the TV’s input source

between the TV and other input

sources.

m/M (fast/slow/freeze frame)

Fast reverse/fast forward during

playback. Each time you press the

button, the search speed changes.

Activates slow-motion play when

pressed for more than one second in

pause mode.

H DISPLAY (pages 24, 29, 36, 41)

Plays one frame at a time when pressed

in pause mode.

Displays playback and web browsing

information on the TV screen.

Displays the preset radio station,

frequency, etc., in the front panel

display.

Note

During Blu-ray 3D Disc playback, slow-

motion reverse play and single-frame

reverse play are not available.

I FOOTBALL

Produces optimized sound for

watching football match broadcasting.

N (play)

Starts or re-starts playback (resume

play).

J BLUETOOTH

Activates One-Touch Play (page 37)

when the system is on and set to the

“BD/DVD” function.

Selects the “BT” function.

When the blue LED indicator lights off

during “BT” function, press to start

pairing or connect to paired Bluetooth

device.

X (pause)

Pauses or re-starts playback.

FUNCTION (page 21)

Selects the playback source.

K SLEEP (page 39)

Sets the sleep timer.

13^GB

Installing the speakers

on a wall

Getting Started

Prepare screws (not supplied)

that are suitable for the hole on

the back of each speaker. See

the illustrations below.

Step 1: Installing the

Speakers

Install the speakers by referring to the

illustration below.

4 mm

A Front left speaker (L)

B Front right speaker (R)

C Subwoofer

30 mm

D TV

5 mm

A C

Hole on the back of the speaker

Fasten the screws to the wall.

The screws should protrude

5 mm to 7 mm.

Since the system is equipped with S-Force

PRO Front Surround* technology, you can

enjoy surround sound with the speakers in

front of the listening position.

5 mm to

7 mm

S-Force PRO Front Surround 3D reproduces a

convincing sense of distance and space,

resulting in a true surround sound experience

without the need for surround speakers.

Hang the speaker on the screw.

Note

• Use caution when placing the speakers and/or

speaker stands attached to the speakers on a

specially treated (waxed, oiled, polished, etc.)

floor, as staining or discoloration may result.

• Do not lean or hang on a speaker, as it may fall

down.

14^GB

Note

• Contact a screw shop or installer regarding the

wall material or screws to be used.

Step 2: Connecting the

System

Do not connect the AC power cord (mains

lead) of the unit to a wall outlet (mains)

until all the other connections are made.

• Use screws that are suitable for the wall

material and strength. As a plaster board wall is

especially fragile, attach the screws securely to

a beam and fasten them to the wall. Install the

speakers on a vertical and flat wall where

reinforcement is applied.

• Sony is not responsible for accident or damage

caused by improper installation, insufficient

wall strength or improper screw installation,

natural calamity, etc.

Note

When you connect other equipment with a

volume control, turn down the volume of the

equipment to a level where sound is not distorted.

Connecting the

speakers

Connect the speaker cords to match the

color of the SPEAKERS jacks of the unit.

When connecting to the unit, insert the

connector until it clicks.

Red

(Front right

Purple

(Subwoofer)

speaker (R))

SPEAKERS

FRONT

SUBWOOFER

White

(Front left

speaker (L))

15^GB

Connecting the TV

Select one of the following connection methods according to the input jacks on your TV.

SPEAKERS

SUBWOOFER

FRONT

Video connection

HDMI cable (not supplied)

High Speed HDMI cable

If the HDMI IN jack of your TV is compatible with the ARC (Audio Return Channel) function, digital

audio signal can be output from the TV via an HDMI cable connection. For setting the ARC function,

see [Audio Return Channel] (page 48).

Audio connections

If you do not connect the system to the TV’s HDMI jack that is compatible with the ARC

function, make an appropriate audio connection for listening to TV sound via the system’s

speakers.

High quality

Optical digital cord (not supplied)

Audio cable (not supplied)

DIGITAL OUT

OPTICAL

AUDIO

OUTPUT

Standard

quality

16^GB

Connecting the other equipment (Set-top box, etc.)

Connect the system so that video signals from the system and other equipment are output

to the TV, and audio signals from the equipment are output to the system as follows.

Video out

Equipment

(Set-top box, VCR, PlayStation , or

digital satellite receiver, etc.)

Audio out

Signal flow

System

: Video signal

: Audio signal

Select one of the following connection methods according to the jack type of the equipment.

SPEAKERS

SUBWOOFER

FRONT

High quality

Optical digital cord (not supplied)

Audio cable (not supplied)

DIGITAL OUT

OPTICAL

AUDIO

OUTPUT

Standard

quality

Note

• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]

to [Off] (page 47).

• You can enjoy equipment sound by selecting the “AUDIO” function for connection B.

17^GB

Connecting the antenna

(aerial)

Step 3: Preparing for

Network Connection

Tip

To connect the system to your network, perform

[Easy Network Settings]. For details, see “Step 4:

Performing the Easy Setup” (page 20).

Select the method based on your LAN

(Local Area Network) environment.

• If you use a wireless LAN

The system has built-in Wi-Fi, and you

can connect the system to the network by

making the network settings.

• If you use other than a wireless LAN

Use a LAN cable to connect to the LAN

(100) terminal on the unit.

FM wire antenna (aerial)

(supplied)

Note

• Be sure to fully extend the FM wire antenna

(aerial).

• After connecting the FM wire antenna (aerial),

keep it as horizontal as possible.

Broadband router

LAN cable (not supplied)

Tip

A shielded interface cable (LAN cable), straight

or crossover, is recommended.

18^GB

x No Security

Before performing the

network settings

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the network

settings with the WPS button.

If not, check the following information in

advance, and record it in the space provided

below.

• The network name (SSID*) that

identifies your network**.

Although you can easily make settings,

anyone can intercept wireless

communication or intrude into your

wireless network, even without any

sophisticated tools. Keep in mind that there

is a risk of unauthorized access or

interception of data.

x WEP

WEP applies security to communications

to prevent outsiders from intercepting

communications or intruding into your

wireless network. WEP is a legacy security

technology that enables older devices

which do not support TKIP/AES to be

connected.

• If security is set on your wireless

network, the security key (WEP key,

WPA key)**.

SSID (Service Set Identifier) is a name that

identifies a particular wireless network.

x WPA-PSK (TKIP), WPA2-PSK

(TKIP)

TKIP is a security technology developed in

response to the deficiencies of WEP. TKIP

assures a higher security level than WEP.

** You need to check the settings of your wireless

LAN router to get the information about SSID

and security key. For details:

– visit the following website:

http://support.sony-europe.com/

– refer to the operating instructions supplied

with the wireless LAN router

x WPA-PSK (AES), WPA2-PSK

(AES)

AES is a security technology that uses an

advanced security method distinct from

WEP and TKIP. AES assures a higher

security level than WEP or TKIP.

– consult the manufacturer of the wireless

LAN router

About wireless LAN

security

Since communication via the wireless LAN

function is established by radio waves, the

wireless signal may be susceptible to

interception. To protect wireless

communication, this system supports

various security functions. Be sure to

correctly configure the security settings in

accordance with your network

environment.

19^GB

Perform [Easy Initial Settings].

Follow the on-screen

instructions to make the basic

Step 4: Performing the

Easy Setup

settings using B/V/v/b and

Before performing Step 4

Make sure all connections are secure, and

then connect the AC power cord (mains

lead).

B/V/v/b

Follow the Steps below to make the basic

adjustments and network settings for the

system.

Displayed items vary depending on the

area.

After completing the [Easy Initial

Settings], press V/v to select

[Easy Network Settings], then

press

The [Easy Network Settings] display

appears.

Insert two R6 (size AA) batteries

(supplied) by matching the 3

and # ends on the batteries to

the markings inside the

Follow the on-screen

instructions to make the network

settings using B/V/v/b and

compartment.

If the system cannot connect to the

network, see “Network connection”

(page 57) or “Wireless LAN

connection” (page 57).

To recall the [Easy Network

Settings] display

Turn on the TV.

1 Press HOME.

The home menu appears on the TV

screen.

Press [/1.

Switch the input selector on

your TV so that the signal from

the system appears on the TV

screen.

The [Easy Initial Settings] for OSD

language selection appears.

2 Press B/b to select

3 Press V/v to select [Easy Network

Settings], then press

[Setup].

20^GB

Step 5: Selecting the

Playback Source

Step 6: Enjoying

Surround Sound

After performing the previous Steps and

starting playback, you can easily enjoy pre-

programmed sound modes that are tailored

to different kinds of sound sources. They

bring the exciting and powerful sound of

movie theaters into your home.

Press FUNCTION repeatedly until

the function you want appears in the

front panel display.

When you press FUNCTION once, the

current function appears in the front panel

display, then each time you press

FUNCTION, the function changes

cyclically as follows.

Selecting the sound

mode

“BD/DVD” t “USB” t “FM” t

“TV” t “BT” t “AUDIO”

Press SOUND MODE +/– repeatedly

during playback until the mode you

want appears in the front panel

display or on the TV screen.

Function and playback source

“BD/DVD”

Disc or network device to be played by the

system

Auto

“USB”

The system automatically selects [Movie] or

[Music] to produce the sound effect

depending on the disc or sound stream.

• 2-channel source: Outputs 2-channel sound

as it is.

• Multi-channel source: Simulates 7.1 or 5.1

surround sound with two front speakers and

a subwoofer.

USB device that is connected to the (USB)

port (page 10)

“FM”

FM radio (page 35)

“TV”

Equipment (TV, etc.) that is connected to the

TV (DIGITAL IN OPTICAL) jack, or a TV

compatible with the Audio Return Channel

function that is connected to the HDMI

(OUT) jack (page 16)

Movie

The system provides the optimized sound for

watching movies.

“BT”

Music

Audio contents of a Bluetooth device

The system provides the optimized sound for

listening to music.

“AUDIO”

Equipment that is connected to the AUDIO

IN (L/R) jacks (page 17)

Digital Music Enhancer

[Digital Music]

The system reproduces an enhanced sound

for compressed audio.

Tip

Demo Sound

• Some functions may be changed via the TV

The system provides ear-catching sound,

suitable for demonstration.

screen by pressing FUNCTION, V/v, and

• You can also press BLUETOOTH on the

remote control to select “BT” function.

21^GB

To select the sound mode

from the option menu

Selecting the football

mode

1 Press OPTIONS and V/v to select

[Sound Mode], then press

Press FOOTBALL during playback.

[Football] appears on the TV screen.

You can experience a feeling of presence in

the stadium when watching a football

match broadcasting.

To turn off the football mode, press

FOOTBALL again to select [Football Off].

The sound mode is changed to the last

selected sound mode.

2 Press V/v to select the sound mode,

then press

To select the pre-

programmed music

equalizer

Press MUSIC EQ repeatedly during

playback.

Note

You can select the sound to suit your

preference.

Each time you press the button, the setting

changes cyclically as follows.

[Standard] t [Rock] t [Hiphop] t

[Electronica]

• Depending on the source, the football mode may

not work well.

• The football mode will be turned off when you

turn off the system.

Tip

You can also select the football mode from the

option menu.

You can also select the music equalizer by

using the option menu in [Music] sound

mode.

Note

The sound mode can be selected only when

[Sound Effect] is set to [Sound Mode On]

(page 46). When [Sound Effect] is set to other

than [Sound Mode On], the sound mode setting

does not apply.

22^GB

Enjoying BONUSVIEW/

BD-LIVE

Playback

Some BD-ROMs with “BD-LIVE Logo*”

have bonus content and other data that can

be downloaded for enjoyment.

Playing a Disc

For playable discs, see “Playable Discs”

(page 58).

Connect the USB device to the

(USB) port (page 25).

For local storage, use a 1 GB or larger

USB memory.

Switch the input selector on

your TV so that the signal from

the system appears on your TV

screen.

Prepare for BD-LIVE (BD-LIVE

only).

Press Z, and place a disc on the

disc tray.

• Connect the system to a network

(page 18).

• Set [BD Internet Connection] to

[Allow] (page 47).

Insert a BD-ROM with

BONUSVIEW/BD-LIVE.

The operation method differs

depending on the disc. Refer to the

operating instructions of the disc.

Press Z to close the disc tray.

Playback starts.

Tip

To delete data in the USB memory, select [Delete

BD Data] in [Video], and press . All data

stored in the buda folder will be deleted.

If playback does not start

automatically, select

[Video], [Music], or

[Photo] category, and press

in the

23^GB

Enjoying Blu-ray 3D

Displaying the playback

information

You can enjoy Blu-ray 3D Discs with the

3D logo*.

You can check the playback information,

etc., by pressing DISPLAY.

The displayed information differs

depending on the disc type and system

status.

Prepare for Blu-ray 3D Disc

playback.

• Connect the system to your

3D-compatible TV using a High

Speed HDMI cable (page 16).

• Set [3D Output Setting] and [TV

Screen Size Setting for 3D] in

[Screen Settings] (page 44).

Example: when playing a BD-ROM

Insert a Blu-ray 3D Disc.

The operation method differs

depending on the disc. Refer to the

operating instructions supplied with

the disc.

Tip

A Output resolution/Video frequency

B Title number or name

Refer also to the operating instructions of your

3D-compatible TV.

C The currently selected audio setting

D Available functions (

angle,

audio,

subtitle)

E Playback information

Displays play mode, playing status

bar, disc type, video codec, bit rate,

repeat type, elapsed time, total playing

time

F Chapter number

G The currently selected angle

24^GB

Playing from a USB

Device

Enjoying music from a

Bluetooth device

You can play video/music/photo files on a

connected USB device.

For playable types of files, see “Playable

Types of Files” (page 59).

About the Bluetooth

wireless technology

Bluetooth wireless technology is a short-

range wireless technology that enables

wireless data communication between

digital devices. Bluetooth wireless

technology operates within a range of about

10 meters.

Connect the USB device to the

(USB) port.

Refer to the operating instructions of

the USB device before connecting.

You do not need wires to get connected as

you do with a USB connection, and you do

not need to place the devices face to face as

you do with wireless infrared technology.

Bluetooth wireless technology is a global

standard supported by thousands of

companies. These companies produce

products that meet the global standard.

Press HOME.

The home menu appears on the TV

screen.

Press B/b to select

[Video],

[Music], or

[Photo].

Press V/v to select

device], then press

[USB

Supported Bluetooth

version and profiles

Note

Profile refers to a standard set of

capabilities for various Bluetooth product

capabilities. This system supports the

following Bluetooth version and profiles.

Supported Bluetooth version:

Bluetooth Specification version 3.0

Supported Bluetooth profiles:

A2DP 1.2 (Advanced Audio Distribution

Profile)

Do not remove the USB device during

operation. To avoid data corruption or

damage to the USB device, turn the system

off before connecting or removing the USB

device.

AVRCP 1.3 (Audio Video Remote Control

Profile)

25^GB

Note

Once pairing is completed, the

device is automatically

connected to the system.

Device name appears on the TV

screen.

• To be able to use the Bluetooth function, the

Bluetooth device to be connected must support

the same profile as this system. Even if the

device supports the same profile, the functions

may differ depending on the specifications of

the Bluetooth device.

• The audio playback on this system may be

delayed from that on the Bluetooth device

because of the characteristics of the Bluetooth

wireless technology.

Note

You can pair up to 9 Bluetooth devices. If

the 10th Bluetooth device is paired, the least

recently connected device will be replaced

by the new one.

Start playback on the Bluetooth

device.

Pairing this system with

a Bluetooth device

Adjust the volume.

Pairing is an operation where Bluetooth

devices register with each other

beforehand. Once a pairing operation is

performed, it does not need to be performed

again.

Adjust the volume of the Bluetooth

device first, if the volume level is still

too low, adjust the volume level on the

unit.

To cancel pairing operation

Press HOME or FUNCTION.

Place the Bluetooth device

within 1 meter from the unit.

Press BLUETOOTH.

You can also select [Bluetooth

Connecting to a

Bluetooth device from

this system

AUDIO] from

menu.

[Input] in home

You can connect to a Bluetooth device

from this unit.

Check the following before playing music:

– The Bluetooth function of the Bluetooth

device is turned on.

Set the Bluetooth device in

pairing mode.

For details on setting the Bluetooth

device in pairing mode, refer to the

operating instructions supplied with

the device.

– The pairing has been completed

(page 26).

Select “BLU-RAY HOME

THEATRE SYSTEM” on the

Bluetooth device display.

Perform this step within 5 minutes,

otherwise pairing will be canceled.

Press BLUETOOTH.

Note

To connect to the most recent connected

Bluetooth device, press N. Then proceed to

Step 5.

Note

If passkey is required on the Bluetooth

device, enter “0000”. Passkey may be called

“Passcode”, “PIN code”, “PIN number” or

“Password”.

Press OPTIONS.

26^GB

Press V/v repeatedly to select

[Device List], then press

A list of paired Bluetooth devices

Connecting to a

smartphone by One-

touchlisteningfunction

(NFC)

appears.

Press V/v repeatedly to select

the device you want, then press

By holding an NFC-compatible

Press N to start playback.

smartphone near to the

on the unit, the

unit and smartphone proceed to complete

pairing and the Bluetooth connection

automatically.

Adjust the volume.

Adjust the volume of the Bluetooth

device first, if the volume level is still

too low, adjust the volume level on the

unit.

Compatible smartphones

Smartphones with a built-in NFC function

(OS: Android 2.3.3 – 4.0.x, excluding

Android 3.x)

Note

Once the unit and the Bluetooth device are

connected, you can control playback by pressing

N, X, x, m/M and ./>.

What is “NFC”?

NFC (Near Field Communication) is a

technology enabling short-range wireless

communication between various devices,

such as mobile phones and IC tags. Thanks

to the NFC function, data communication

can be achieved easily just by holding the

To disconnect the

Bluetooth device

Press HOME, FUNCTION or RETURN.

To delete a pairedBluetooth

device from the device list

device near the

devices.

on the NFC-compatible

1 Follow Steps 1 to 3 above.

2 Press V/v repeatedly to select the

Download and install the app

“NFC Easy Connect”.

device, then press OPTIONS.

“NFC Easy Connect” is a free app for

Android smartphones that can be

obtained on Google Play. Search for

the app using the keyword “NFC Easy

Connect” on the site, or access the

download site directly by reading the

two-dimensional code below.

Note that “NFC Easy Connect” is free

but data communication fees when

downloading are charged separately.

3 Press V/v repeatedly to select

[Remove], then press

4 Follow the on-screen instructions to

delete the device using B/V/v/b and

Note

While connected to a Bluetooth device, this

system cannot be detected and a connection

cannot be established from another Bluetooth

device.

27^GB

Two-dimensional code* for

direct access

Note

• The system only can recognizes and connects to

one NFC-compatible device at a time.

* Use a two-dimensional code reader app.

• Depending on your smartphone, you may need

to turn on the NFC function on your smartphone

in advance. For details, refer to the operating

instructions of the smartphone.

Tip

If pairing and the Bluetooth connection fail, do

the following.

Note

– Relaunch “NFC Easy Connect” and move the

smartphone slowly over the

– Remove the case from the smartphone if using

a commercially available smartphone case.

The app may not be available in some

countries/regions.

Start the “NFC Easy Connect”

app on the smartphone.

Make sure that the application screen

is displayed.

To listen to music

Start playback of an audio source on the

smartphone. For details on playback

operations, refer to the operating

instructions of your smartphone.

Hold the smartphone near to the

on the unit until the

smartphone vibrates.

Tip

If the volume level is low, adjust the volume of

the smartphone first. If the volume level is still

too low, adjust the volume level on the unit.

To stop playback

The playback will be stopped when you

Vibration cue is provided when the

smartphone is recognized by the unit.

After being recognized by the unit,

follow the on-screen instructions

displayed on the smartphone, and

complete the procedure for Bluetooth

connection.

When the Bluetooth connection is

established, the blue LED indicator on

the front panel stops flashing. The

playback time appears in the front

panel display.

perform any of the following items:

– Hold the smartphone near to the

the unit again.

– Stop the music player of the smartphone.

– Turn off the unit or the smartphone.

– Change the function.

– Disable the Bluetooth function on the

smartphone.

28^GB

Video streaming control

panel

The control panel appears when a video file

starts playing. The displayed items may

differ depending on the Internet content

provider.

Playing via a Network

Enjoying Sony

Entertainment Network

(SEN)

To display again, press DISPLAY.

Sony Entertainment Network serves as a

gateway delivering selected Internet

content and a variety of on-demand

entertainment straight to your unit.

Tip

A Control display

• Some Internet content requires registration via a

PC before it can be played. For further details,

visit the following website:

Press B/V/v/b or

operations.

for playback

http://support.sony-europe.com/

• Some Internet content may not be available in

some countries/regions.

B Playing status bar

Status bar, cursor indicating the

current position, playing time, duration

of the video file

Prepare for Sony Entertainment

Network.

C Network condition indicator

Indicates signal strength for a

wireless connection.

Connect the system to a network

(page 18).

Indicates a wired connection.

Press SEN.

D Network transmission speed

E The next video file name

Press B/V/v/b to select the

Internet content and a variety of

on-demand entertainment, then

F The currently selected video file name

press

29^GB

To play files stored on a

DLNA server via the system

(DLNA Player)

Playing files on a Home

Network (DLNA)

Select the DLNA server icon from

You can play video/music/photo files on

other DLNA-certified equipment by

connecting them to your home network.

[Video],

[Music], or

[Photo] in

the home menu, then select the file that you

want to play.

This unit can be used as a player and

renderer.

Server

• Server: Stores and shares digital media

contents

• Player: Finds and plays digital media

content from the DMS

Player

(This system)

• Renderer: Receives and plays files from

the server, and can be operated by another

equipment (controller)

• Controller: Operates the renderer

equipment

To play remote files by

operating the system

(Renderer) via a DLNA

controller

Server

You can operate the system with a

DLNA-certified controller (a mobile

phone, etc), when playing files stored on a

DLNA server.

Server

Player

(This system)

Renderer

(This system)

Player

Prepare for using the DLNA

function.

Controller

• Connect the system to a network

(page 18).

• Prepare other DLNA-certified

equipment. For details, refer to the

operating instructions of the equipment.

For details on operation, refer to the

operating instructions of the DLNA

controller.

Note

Do not operate the system with the supplied

remote control and a DLNA controller at the same

time.

Tip

The system is compatible with the “Play To”

function of Windows Media Player 12 that

comes standard with Windows 7.

30^GB

To use the system as the

PARTY host

Playing the same music

in different rooms

(PARTY STREAMING)

Select a track in

[Music], a radio station

in [Radio],

[AUDIO] or

[Bluetooth AUDIO] in

[Input],

You can play the same music at the same

time on all Sony equipment which are

compatible with the PARTY

STREAMING function and connected to

your home network.

press OPTIONS. Then select [Start

PARTY] to start.

To close, press OPTIONS, then select

[Close PARTY].

Note

Contents in

[Music] and the “FM”,

If content that is not compatible with the PARTY

STREAMING function is played, the system

closes PARTY automatically.

“BT” and “AUDIO” functions can be used

with the PARTY STREAMING function.

There are two kinds of PARTY

STREAMING-compatible equipment.

• PARTY host: Plays and sends music.

• PARTY guest: Plays music that is

received from PARTY host.

To use the system as a

PARTY guest

Select

[PARTY] in

[Music], then

select the PARTY host device icon.

To leave the PARTY, press OPTIONS,

then select [Leave PARTY].

This unit can be used as a PARTY host or

PARTY guest.

To close the PARTY, press OPTIONS,

then select [Close PARTY].

PARTY host

(This system)

Note

The sale and product lineup of products that are

compatible with the PARTY STREAMING

function differ depending on the area.

PARTY guest

Searching for video/

music information

PARTY guest

You can acquire content information using

Gracenote technology and search for

related information.

Prepare for PARTY STREAMING.

• Connect the system to a network

(page 18).

Connect the system to a network

(page 18).

• Connect equipment which is compatible

with the PARTY STREAMING function.

Insert a disc with content about

which you want to search.

You can perform a video search from a

BD-ROM or DVD-ROM, and a music

search from a CD-DA (music CD).

31^GB

Press B/bto select

[Video] or

[Video

Available Options

Various settings and playback operations

are available by pressing OPTIONS. The

available items differ depending on the

situation.

[Music].

Press V/v to select

Search] or

[Music Search].

The content information (such as title,

cast, track, or artist), [Playback

History] and [Search History] are

displayed.

Common options

• [Playback History]

[Sound Mode]

Changes the sound mode setting (page 21).

Displays a list of previously played

BD-ROM/DVD-ROM/CD-DA

(music CD) titles. Select a title to

acquire content information.

• [Search History]

Displays a list of previous searches

performed via the [Video Search] or

[Music Search] function.

[Football]

Turns on or off the football mode (page 22).

[Repeat Setting]

Sets repeat playback.

[3D Menu]

[Simulated 3D]: Adjusts the simulated 3D

effect.

[3D Depth Adjustment]: Adjusts the depth of

3D images.

[2D Playback]: Sets playback to 2D image.

To search for further related

information

Select an item in the lists, then select the

[Play/Stop]

Starts or stops playback.

service for searches.

[Play from start]

Plays the item from the beginning.

Using the TV SideView

[Start PARTY]

TV SideView is a free mobile application

for the remote device (smartphone, etc). By

using the TV SideView with this system,

you can easily enjoy the system by the

operation on your remote device.

You can launch a service or application

directly from the remote device and view

the disc information during the disc

playback. The TV SideView also can be

used as a remote control and software

keyboard.

Starts a party with the selected source.

This item may not appear depending on the

source.

[Leave PARTY]

Leaves a party which the system is

participating in. The PARTY STREAMING

function continues among other participating

equipment.

[Close PARTY]

For PARTY host: Closes a party.

For PARTY guest: Closes a party which the

system is participating in. The PARTY

STREAMING function ends for all other

participating equipment.

Before you use the TV SideView device

with this system for the first time, be sure to

[Change Category]

Switches among the

and [Photo] category in “BD/DVD” (for

disc only) or “USB” function. This item only

available when the display list is available

for the category.

Follow the on-screen instructions on the

TV SideView device for registration.

[Video], [Music]

Note

The registration will be possible only when home

menu appears on the TV screen.

32^GB

[Video] only

[Music] only

[A/V SYNC]

[Add Slideshow BGM]

Adjusts the time gap between picture and

Registers music files in the USB memory as

sound (page 34).

slideshow background music (BGM).

[3D Output Setting]

[Music Search]

Sets whether or not to output 3D video

Displays information on the audio CD

automatically.

(CD-DA) based on Gracenote technology.

[Video Settings]

• [Picture Quality Mode]: Selects the picture

settings for different lighting environments.

• [BNR]: Reduces the mosaic-like block

noise in the picture.

• [MNR]: Reduces minor noise around the

picture outlines (mosquito noise).

[Photo] only

[Slideshow]

Starts a slideshow.

[Slideshow Speed]

Changes the slideshow speed.

[Pause]

[Slideshow Effect]

Pauses playback.

Sets the effect when playing a slideshow.

[Top Menu]

[Slideshow BGM]

Displays the BD’s or DVD’s Top Menu.

• [Off]: Turns off the function.

• [My Music from USB]: Sets the music files

registered in [Add Slideshow BGM].

• [Play from Music CD]: Sets the tracks on

CD-DAs (music CDs).

[Menu/Popup Menu]

Displays the BD-ROM’s Pop-up Menu or

DVD’s menu.

[Title Search]

Searches for a title on BD-ROMs/DVD

VIDEOs and starts playback from the

beginning.

[Change Display]

Switches between [Grid View] and [List

View].

[Chapter Search]

Searches for a chapter and starts playback

from the beginning.

[Rotate Left]

Rotates the photo counterclockwise by

90 degrees.

[Audio]

Selects the audio format/track.

[Rotate Right]

Rotates the photo clockwise by 90 degrees.

[Subtitle]

[View Image]

Displays the selected picture.

Selects the subtitle language when

multilingual subtitles are recorded on

BD-ROMs/DVD VIDEOs.

[Angle]

Switches the viewing angles when multi-

angles are recorded on BD-ROMs/DVD

VIDEOs.

[IP Content Noise Reduction]

Adjusts the video quality for Internet

content.

[Video Search]

Displays information on the BD-ROM/

DVD-ROM based on Gracenote technology.

33^GB

Adjusting the delay

betweenthepictureand

sound

Sound Adjustment

Selecting the Audio

Format, Multilingual

Tracks, or Channel

When the system is playing a BD/DVD

VIDEO recorded in multiple audio formats

(PCM, Dolby Digital, MPEG audio, or

DTS) or multilingual tracks, you can

change the audio format or language.

With a CD, you can select the sound from

the right or left channel and listen to the

sound of the selected channel through both

the right and left speakers.

(A/V SYNC)

When the sound does not match the

pictures on the TV screen, you can adjust

the delay between the picture and sound for

each function separately.

The setting method differs depending on

the function.

When other than the “BT” or

“TV” function is selected

Press OPTIONS.

The option menu appears on the TV

screen.

Press AUDIO repeatedly during

playback to select the audio signal

you want.

The audio information appears on the TV

screen.

Press V/v to select [A/V SYNC],

then press

Press B/b to adjust the delay,

then press

You can adjust from 0 ms to 300 ms in

25 ms increments.

x BD/DVD VIDEO

Depending on the BD/DVD VIDEO, the

When the “TV” function is

selected

option of language varies.

When 4 digits are displayed, they represent

a language code. See “Language Code

List” (page 63). When the same language is

displayed two or more times, the BD/DVD

VIDEO is recorded in multiple audio

formats.

Press OPTIONS.

“AV.SYNC” appears in the front panel

display.

Press

Press V/v to adjust the delay,

then press

or b.

x DVD-VR

The types of sound tracks recorded on a

disc are displayed.

Example:

You can adjust from 0 ms to 300 ms in

25 ms increments.

• [ Stereo]

• [ Stereo (Audio1)]

• [ Stereo (Audio2)]

• [ Main]

Press OPTIONS.

The option menu in the front panel

display turns off.

• [ Sub]

• [ Main/Sub]

34^GB

Note

[

Stereo (Audio1)] and [ Stereo (Audio2)] do

Tuner

not appear if only one audio stream is recorded on

the disc.

Listening to the Radio

x CD

• [ Stereo]: The standard stereo sound.

• [ 1/L]: The sound of the left channel

(monaural).

• [ 2/R]: The sound of the right channel

(monaural).

• [ L+R]: The sound of both the left and

right channels output from each

individual speaker.

Press FUNCTION repeatedly

until “FM” appears in the front

panel display.

Select the radio station.

Automatic tuning

Hold down TUNING +/– until the auto

scanning starts.

[Auto Tuning] appears on the TV

screen. Scanning stops when the

system tunes in a station.

To cancel automatic tuning, press any

buttons.

Enjoying Multiplex

Broadcast Sound

(DUAL MONO)

Manual tuning

Press TUNING +/– repeatedly.

You can enjoy multiplex broadcast sound

when the system receives or plays a Dolby

Digital multiplex broadcast signal.

Press 2 +/– repeatedly to

adjust the volume.

Note

To receive a Dolby Digital signal, you need to

connect a TV or other equipment to the TV

(DIGITAL IN OPTICAL) jack with a optical

digital cord (pages 16, 17).

If your TV’s HDMI IN jack is compatible with

the Audio Return Channel function (pages 16,

47), you can receive a Dolby Digital signal via an

HDMI cable.

If an FM program is noisy

If an FM program is noisy, you can select

monaural reception. There will be no stereo

effect, but reception will improve.

Press OPTIONS.

The option menu appears on the TV

screen.

Press AUDIO repeatedly until the

signal you want appears in the front

panel display.

• “MAIN”: Sound of the main language

will be output.

• “SUB”: Sound of the sub language will

be output.

• “MN/SUB”: Mixed sound of both the

main and sub languages will be output.

Press V/v to select [FM Mode],

then press

Press V/v to select [Monaural],

then press

• [Stereo]: Stereo reception.

• [Monaural]: Monaural reception.

Tip

You can set [FM Mode] for each preset station

separately.

35^GB

To turn off the radio

Press "/1.

Selecting a preset

station

Press FUNCTION repeatedly

until “FM” appears in the front

panel display.

Presetting radio

stations

The last received station is tuned in.

You can preset up to 20 stations. Before

tuning, make sure to turn down the volume

to minimum.

Press PRESET +/– repeatedly to

select the preset station.

The preset number and frequency

appear on the TV screen and front

panel display.

Each time you press the button, the

system tunes in one preset station.

Press FUNCTION repeatedly

until “FM” appears in the front

panel display.

Hold down TUNING +/– until the

auto scanning starts.

Tip

Scanning stops when the system tunes

in a station.

• You can select the preset station number

directly by pressing the number buttons.

• Each time you press DISPLAY, the

display in the front panel display changes

as follows:

Press OPTIONS.

The option menu appears on the TV

screen.

Frequency y Preset number

Press V/v to select [Preset

Memory], then press

Press V/v to select the preset

number you want, then press

Repeat Steps 2 to 5 to store

other stations.

To change a preset number

Select the preset number you want by

pressing PRESET +/–, then perform the

procedure from Step 3.

36^GB

Receiving Radio Data

System (RDS)

The Radio Data System (RDS) is a

broadcasting service that allows radio

stations to send additional information

along with the regular program signal. This

system offers convenient RDS features,

such as station name display.

Other Operations

Using the Control for

HDMI Function for

“BRAVIA” Sync

This function is available on TVs with the

“BRAVIA” Sync function.

By connecting Sony equipment that is

compatible with the Control for HDMI

function via an HDMI cable, operation is

simplified.

The station name appears on the TV screen.

Simply select a station from the FM

band.

Note

• RDS may not work properly if the station you

are tuned to is not transmitting the RDS signal

properly, or if the signal strength is weak.

• Not all FM stations provide RDS service, nor do

they provide the same type of services. If you

are not familiar with the RDS system, check

with your local radio stations for details on RDS

services in your area.

To use the “BRAVIA” Sync function, be sure to

turn on the system and all connected equipment

after completed the HDMI connection.

Control for HDMI - Easy

Setting

You can set the system’s [Control for

HDMI] function automatically by enabling

the corresponding setting on the TV.

For details about the Control for HDMI

function, see “[HDMI Settings]” (page 47)

System Power Off

You can turn the system off in sync with the

TV.

Note

The system does not turn off automatically while

playing music or when “FM” function is selected.

One-Touch Play

When you press N on the remote control,

the system and TV turn on, and the TV’s

input is switched to the HDMI input which

the system is connected.

37^GB

System Audio Control

You can enjoy the sound from TV or other

equipment by a simple operation.

Setting the Speakers

[Speaker Settings]

You can use the System Audio Control

function as follows:

To obtain optimum surround sound, set the

speakers’ distance from your listening

position. Then use the test tone to adjust the

balance of the speakers.

• When the system is turned on, the sound

of the TV or other equipment can be

output from the speakers of the system.

• When sound from the TV or other

equipment is output via the speakers of

the system, you can switch the sound to

output from the TV speakers by pressing

SPEAKERS TVyAUDIO.

• When sound from the TV or other

equipment is output via the speakers of

the system, you can adjust the volume

and turn off the sound of the system by

operating the TV.

Press HOME.

The home menu appears on the TV

screen.

Press B/b to select

Press V/v to select [Audio

Settings], then press

Press V/v to select [Speaker

Settings], then press

[Setup].

Audio Return Channel

The [Speaker Settings] display

appears.

You can enjoy TV sound via the system by

using just one HDMI cable. For details of

the setting, see “[Audio Return Channel]”

(page 48).

Press V/v to select the item, then

press

Press V/v to adjust the

parameter.

Language Follow

When you change the language for the

on-screen display of the TV, the system’s

on-screen display language is also changed

after turning off and on the system.

Press B/b and

setting.

to confirm the

Check the following settings.

x [Distance]

Be sure to set the parameters of the distance

from the listening position to the speakers.

You can set the parameters from 0.0 to

7.0 meters.

[Front Left/Right] 3.0 m: Set the front

speaker distance.

[Subwoofer] 3.0 m: Set the subwoofer

distance.

38^GB

Note

x [Level]

The test tone signals are not output from the

HDMI (OUT) jack.

You can adjust the sound level of the

speakers. You can set the parameters from

–6.0 dB to +6.0 dB. Be sure to set [Test

Tone] to [On] for easy adjustment.

Tip

To adjust the volume of all the speakers at one

time, press 2 +/–.

[Front Left/Right] 0.0 dB: Set the front

speaker level.

[Subwoofer] 0.0 dB: Set the subwoofer

level.

Using the Sleep Timer

You can set the system to turn off at a

preset time, so you can fall asleep listening

to music. The time can be preset in intervals

of 10 minutes.

x [Test Tone]

The speakers will emit a test tone to adjust

[Level].

[Off]: The test tone is not emitted from the

speakers.

[On]: The test tone is emitted from each

speaker in sequence while adjusting level.

When you select one of the [Speaker

Settings] items, the test tone is emitted

from each speaker in sequence.

Adjust the sound level as follows.

Press SLEEP.

Each time you press SLEEP, the minutes

display (the remaining time) in the front

panel display changes by 10 minutes.

When you set the sleep timer, the

remaining time appears every 5 minutes.

When the remaining time is less than

2 minutes, “SLEEP” flashes in the front

panel display.

1 Set [Test Tone] to [On].

2 Press V/v to select [Level], then

press

3 Press V/v to select the speaker type

you want, then press

To check the remaining

time

Press SLEEP once.

4 Press B/b to select the left or right

speaker, then press V/v to adjust the

level.

To change the remaining

time

Press SLEEP repeatedly.

5 Press

6 Repeat Steps 3 to 5.

7 Press RETURN.

The system returns to the previous

display.

8 Press V/v to select [Test Tone], then

press

9 Press V/v to select [Off], then press

39^GB

Preparing the remote

control for controlling

the TV

Deactivating the

Buttons on the Unit

(Child Lock)

You can deactivate the buttons on the unit

(except for "/1) for preventing

While holding down TV "/1, press

number buttons to enter your TV’s

manufacturer’s code (see the table).

Then release TV "/1.

misoperation, such as child mischief.

Manufacturer

SONY

Code number

Hold down x on the unit for more

than 5 seconds.

01 (default)

“LOCKED” appears in the front panel

display.

The child lock function is activated and the

buttons on the unit are locked. (You can

operate the system by using the remote

control.)

PANASONIC

PHILIPS

02, 03, 07

02, 08

SAMSUNG

TOSHIBA

To cancel, hold down x for more than

5 seconds until “UNLOCK” appears in the

front panel display.

If the setting is unsuccessful, the currently

registered code is not changed. Re-enter the

code number.

Note

If more than one code number is listed, try

entering them one at a time until you find

the code that works with your TV.

If you operate the buttons on the unit while the

child lock function is on, “LOCKED” flashes in

the front panel display.

Saving Power in

Standby Mode

Check that you have made the following

settings:

– [Control for HDMI] in [HDMI Settings]

is set to [Off] (page 47).

– [Quick Start Mode] is set to [Off]

(page 48).

Controlling Your TV

with the Supplied

Remote Control

By adjusting the remote control signal, you

can control your TV with the supplied

remote control.

Note

– [Remote Start] in [Network Settings] is

set to [Off] (page 49).

When you replace the batteries of the remote

control, the code number may reset to the default

(SONY) setting. Set the appropriate code number

again.

40^GB

Internet Browser

display

Browsing Websites

Prepare for Internet browsing.

Connect the system to a network

(page 18).

You can check website information by

pressing DISPLAY. The display

information differs depending on the

website and page status.

Press HOME.

The home menu appears on the TV

screen.

Press B/b to select

[Network].

Press V/v to select [Internet

Browser], then press

The [Internet Browser] display

appears.

A Page title

Note

B Page address

Some websites may not display correctly, or not

function.

C Cursor

Move by pressing B/V/v/b. Place the

cursor on the link you want to view,

then press . The linked website is

displayed.

To enter a URL

Select [URL entry] from the options menu.

Enter the URL using the software

keyboard, then select [Enter].

D SSL icon

To set the default start page

While the page you want to set is displayed,

select [Set as start page] from the options

menu.

Appears when the linked URL is

secured.

E Signal strength indicator

Appears when the system is connected

to a wireless network.

To return to the previous

page

Select [Previous page] from the options

F Progress bar/Loading icon

Appears when the page is being read,

or during file download/transfer.

menu.

When the previous page does not appear

even if you select [Previous page], select

[Window List] from the options menu and

select the page you want to return to from

the list.

G Text input field

Press , then choose [Input] from the

options menu to open the software

keyboard.

H Scroll bar

Press B/V/v/b to move the page

display left, up, down, or right.

To quit Internet Browser

Press HOME.

41^GB

[Display certificate]

Displays server certificates sent from pages

that support SSL.

Available options

Various settings and operations are

available by pressing OPTIONS.

The available items differ depending on the

situation.

[Input]

Displays the software keyboard to enter

characters while browsing a website.

[Break]

Moves the cursor to the next line in the text

input field.

[Browser Setup]

Displays the Internet Browser settings.

• [Zoom]: Increases or decreases the size of

the displayed contents.

• [JavaScript Setup]: Sets whether to enable

or disable JavaScript.

[Delete]

Erases one character on the left side of the

cursor during text input.

• [Cookie Setup]: Sets whether or not to

accept browser cookies.

• [SSL Alarm Display]: Sets whether to

enable or disable SSL.

[Window List]

Displays a list of all current opened websites.

Allows you to return to a previous displayed

website by selecting the window.

[Bookmark List]

Displays the bookmark list.

[URL entry]

Allows you to enter a URL when the

software keyboard is displayed.

[Previous page]

Moves to a previous displayed page.

[Next page]

Moves to the previous displayed next page.

[Cancel loading]

Stops loading a page.

[Reload]

Reloads the same page.

[Add to Bookmark]

Adds the current displayed website to the

bookmark list.

[Set as start page]

Sets the current displayed website as the

default start page.

[Open in new window]

Opens a link in a new window.

[Character encoding]

Sets the character encoding system.

42^GB

Icon

Explanation

[System Settings]

(page 47)

Makes the system-related

settings.

Settings and Adjustments

Using the Setup Display

You can make various adjustments to items

such as picture and sound.

[Network Settings]

(page 48)

Makes detailed settings for

Internet and network.

The default settings are underlined.

[Easy Network Settings]

(page 49)

Note

Runs [Easy Network

Settings] to make the basic

network settings.

Playback settings stored in the disc take priority

over the Setup Display settings. Therefore, some

of the functions may not be performed.

[Resetting] (page 49)

Resets the system to the

factory settings.

Press HOME.

The home menu appears on the TV

screen.

Press B/b to select

[Setup].

[Network Update]

By updating your software to the latest

version, you can take advantage of the

newest functions.

For information about update functions,

refer to the following website:

http://support.sony-europe.com/

Press V/v to select the setup

category icon, then press

Icon

Explanation

[Network Update]

(page 43)

Updates the software of the

system.

[Screen Settings]

(page 44)

Makes the screen settings

During a software update, “UPDATE”

appears in the front panel display. After the

update completes, the unit automatically

turns off.

While the updating operation is in progress,

do not turn on or off the unit, or operate the

unit or TV. Wait for the software update to

complete.

according to the type of TV.

[Audio Settings]

(page 45)

Makes the audio settings

according to the type of

connecting jacks.

[BD/DVD Viewing

Settings] (page 46)

Makes detailed settings for

BD/DVD playback.

[Parental Control

Settings] (page 47)

Makes detailed settings for

the Parental Control

function.

43^GB

x [DVD Aspect Ratio]

[Letter Box]: Displays a wide picture with

black bands on the top and bottom.

[Screen Settings]

x [3D Output Setting]

[Auto]: Normally select this.

[Off]: Select this to display all contents in

2D.

[Pan & Scan]: Displays a full-height

picture on the entire screen, with trimmed

sides.

x [TV Screen Size Setting for 3D]

Sets the screen size of your 3D-compatible

TV.

x [TV Type]

[16:9]: Select this when connecting to a

wide-screen TV or a TV with a wide-mode

function.

[4:3]: Select this when connecting to a 4:3

screen TV without a wide-mode function.

x [Cinema Conversion Mode]

[Auto]: Normally select this. The unit

automatically detects whether the material

is video-based or film-based, and switches

to the appropriate conversion method.

[Video]: The conversion method suited for

video-based material will always be

selected regardless of the material.

x [Screen Format]

[Full]: Select this when connecting to a TV

with a wide-mode function. Displays a 4:3

screen picture in 16:9 aspect ratio even on

a wide-screen TV.

[Normal]: Changes the picture size to fit

the screen size with the original picture

aspect ratio.

x [Output Video Resolution]

[Auto]: Outputs video signal according to

the resolution of the TV or connected

equipment.

[Original Resolution]: Outputs video signal

according to the resolution recorded on the

disc. (When the resolution is lower than SD

resolution, it is scaled up to SD resolution.)

[480i/576i]*, [480p/576p]*, [720p],

[1080i], [1080p]: Outputs video signal

according to the selected resolution setting.

* If the color system of your disc is NTSC, the

video signals resolution can be converted to

[480i] and [480p] only.

44^GB

x [BD-ROM 24p Output]

x [Pause Mode] (BD/DVD VIDEO/

DVD-R/DVD-RW only)

[Auto]: The picture, including subjects that

move dynamically, is output with no jitter.

Normally select this position.

[Frame]: The picture, including subjects

that do not move dynamically, is output in

high resolution.

[Auto]: Outputs 24p video signals only

when you connect a 1080/24p-compatible

TV via an HDMI connection and the

[Output Video Resolution] is set to [Auto]

or [1080p].

[On]: Select this when your TV is

compatible with 1080/24p video signals.

[Off]: Select this when your TV is not

compatible with 1080/24p video signals.

[Audio Settings]

x [DVD-ROM 24p Output]

[Auto]: Outputs 24p video signals only

when you connect a 1080/24p-compatible

TV via an HDMI connection and the

[Output Video Resolution] is set to [Auto]

or [1080p].

x [BD Audio MIX Setting]

[On]: Outputs the audio obtained by mixing

the interactive audio and secondary audio

to the primary audio.

[Off]: Select this when your TV is not

compatible with 1080/24p video signals.

[Off]: Outputs the primary audio only.

x [Audio DRC]

You can compress the dynamic range of the

sound track.

x [YCbCr/RGB (HDMI)]

[Auto]: Automatically detects the type of

external equipment, and switches to the

matching color setting.

[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2

video signals.

[Auto]: Performs playback at the dynamic

range specified by the disc (BD-ROM

only).

[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4

video signals.

[RGB]: Select this when connecting to an

equipment with an HDCP compliant DVI

jack.

[On]: The system reproduces the sound

track with the kind of dynamic range that

the recording engineer intended.

[Off]: No compression of dynamic range.

x [Attenuate - AUDIO]

x [HDMI Deep Colour Output]

[Auto]: Normally select this.

[16bit], [12bit], [10bit]: Outputs 16bit/

12bit/10bit video signals when the

connected TV is compatible with Deep

Colour.

Distortion may occur when you listen to an

equipment connected to the AUDIO IN

(L/R) jacks. You can prevent distortion by

attenuating the input level on the unit.

[On]: Attenuates the input level. The output

level will decrease at this setting.

[Off]: Normal input level.

[Off]: Select this when the picture is

unstable or colors appear unnatural.

45^GB

x [Audio Output]

x [Bluetooth AUDIO - AAC]

You can select the output method where the

audio signal is output.

You can enable and disable AAC audio.

[On]: AAC audio if the Bluetooth device

supports AAC.

[Off]: SBC audio.

[Speaker]: Outputs multi-channel sound

from the system’s speakers only.

[Speaker + HDMI]: Outputs multi-channel

sound from the system’s speakers and

2-channel linear PCM signals from the

HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI

(OUT) jack only. Sound format depends on

the connected equipment.

Note

You can enjoy high quality sound if the AAC is

enabled. In case you cannot listen to AAC sound

from your device, select [Off].

Note

[BD/DVD Viewing

Settings]

• When [Control for HDMI] is set to [On]

(page 47), [Audio Output] is set to [Speaker +

HDMI] automatically and this setting cannot be

changed.

x [BD/DVD Menu Language]

You can select the default menu language

for BD-ROMs or DVD VIDEOs.

When you select [Select Language Code],

the display for entering the language code

appears. Enter the code for your language

by referring to “Language Code List”

(page 63).

• When [Audio Output] is set to [HDMI], the

output signal format for the “TV” function is

2-channel linear PCM.

x [Sound Effect]

You can turn on or off the system’s sound

effects (SOUND MODE setting (page 21)).

[Sound Mode On]: Enables the surround

effect of the sound mode (page 21) and

Football mode (page 22).

x [Audio Language]

You can select the default track language

for BD-ROMs or DVD VIDEOs.

When you select [Original], the language

given priority in the disc is selected.

When you select [Select Language Code],

the display for entering the language code

appears. Enter the code for your language

by referring to “Language Code List”

(page 63).

[2ch Stereo]: This system outputs the sound

from the front left/right speakers and

subwoofer only. Multi-channel surround

formats are downmixed to 2-channel.

[Off]: The sound effects are disabled. You

can hear sound as it is recorded.

x [Speaker Settings]

To obtain optimum surround sound, set the

speakers. For details, see “Setting the

Speakers” (page 38).

46^GB

x [Subtitle Language]

x [BD Parental Control]/[DVD

Parental Control]/[Internet Video

Parental Control]

By setting Parental Control, scenes can be

blocked or replaced with different scenes.

Follow the on-screen instructions and enter

your four-digit password.

You can select the default subtitle language

for BD-ROMs or DVD VIDEOs.

When you select [Select Language Code],

the display for entering the language code

appears. Enter the code for your language

by referring to “Language Code List”

(page 63).

x [Internet Video Unrated]

[Allow]: Allows the playback of unrated

Internet videos.

[Block]: Blocks the playback of unrated

Internet videos.

x [BD Hybrid Disc Playback Layer]

[BD]: Plays BD layer.

[DVD/CD]: Plays DVD or CD layer.

x [BD Internet Connection]

[Allow]: Normally select this.

[Do not allow]: Prohibits Internet

connection.

[System Settings]

x [OSD Language]

You can select the language you want for

the system on-screen display.

[Parental Control

Settings]

x [Main Unit illumination]

[On]: The front panel display is always

turned on and the brightness of the LED

indicator is the maximum.

[Auto]: The front panel display is turned

off and the brightness of LED indicator is

reduced automatically if you do not operate

the system for about 10 seconds.

x [Password]

Set or change the password for the Parental

Control function. A password allows you to

set a restriction on BD-ROM, DVD

VIDEO, or Internet video playback. If

necessary, you can differentiate the

restriction levels for BD-ROMs and DVD

VIDEOs.

x [HDMI Settings]

[Control for HDMI]

x [Parental Control Area Code]

Playback of some BD-ROMs or DVD

VIDEOs can be limited according to the

geographic area. Scenes may be blocked or

replaced with different scenes. Follow the

on-screen instructions and enter your four-

digit password.

[On]: Turns on the [Control for HDMI]

function. You can operate mutually

between equipment that are connected with

an HDMI cable.

[Off]: Off.

47^GB

[Audio Return Channel]

x [Software Update Notification]

[On]: Sets the system to inform you of

latest software version information

(page 43).

This function is available when you

connect the system to a TV’s HDMI IN

jack that is compatible with the Audio

Return Channel function and [Control for

HDMI] is set to [On].

[Off]: Off.

[Auto]: The system can receive the digital

audio signal of the TV automatically via an

HDMI cable.

x [Gracenote Settings]

[Auto]: Automatically downloads disc

information when you stop playback of the

disc. To download, the system must be

connected to the network.

[Manual]: Downloads disc information

when [Video Search] or [Music Search] is

selected.

[Off]: Off.

Note

When you set the [Quick Start Mode] to [On], the

[Control for HDMI] is automatically set to [Off].

x [Quick Start Mode]

[On]: Shortens the startup time from

standby mode. You can operate the system

quickly after turning it on.

x [System Information]

You can display the system’s software

version information and the MAC address.

[Off]: The default setting.

Note

x [Software License Information]

You can display the Software License

Information.

When you set the [Control for HDMI] or [Remote

Start] to [On], the [Quick Start Mode] is

automatically set to [Off].

x [Auto Standby]

[On]: Turns on the [Auto Standby]

function. When you do not operate the

system for about 30 minutes, the system

enters standby mode automatically.

[Off]: Off.

[Network Settings]

x [Internet Settings]

Connect the system to the network

beforehand. For details, see “Step 3:

Preparing for Network Connection”

(page 18).

x [Auto Display]

[On]: Automatically displays information

on the screen when changing the viewing

titles, picture modes, audio signals, etc.

[Off]: Displays information only when you

press DISPLAY.

[Wired Setup]: Select this when you

connect to a broadband router using a LAN

cable.

[Wireless Setup(built-in)]: Select this when

you use the built-in wireless LAN of the

system for wireless network connection.

x [Screen Saver]

[On]: Turns on the screen saver function.

[Off]: Off.

Tip

For further details, visit the following website and

check the FAQ:

http://support.sony-europe.com/

48^GB

x [Network Connection Status]

Displays the current network connection

status.

x [Registered Remote Devices]

Displays a list of your registered remote

devices.

Note

x [Network Connection

Diagnostics]

To use this function, be sure to perform the

software update (page 43).

You can run the network diagnostic to

check if the network connection has been

made properly.

x [Remote Start]

[On]: Allows turn on the system by a

device linked via network when the system

is in standby mode.

[Off]: The system cannot be turned on by a

device linked via network.

x [Connection Server Settings]

Sets whether or not to display the

connected DLNA server.

Note

x [Renderer Set-up]

When you set the [Quick Start Mode] to [On], the

[Remote Start] is automatically set to [Off].

[Automatic Access Permission]: Sets

whether or not to allow automatic access

from a newly detected DLNA controller.

[Smart Select]: Allows a Sony DLNA

controller to find the system as the target

equipment to operate by using the infrared

ray. You can set this function to on or off.

[Renderer Name]: Displays the system’s

name as it is listed on other DLNA devices

on the network.

[Easy Network

Settings]

Runs [Easy Network Settings] to make the

basic network settings. Follow the on-

screen instructions.

x [Renderer Access Control]

Sets whether or not to accept commands

from DLNA controllers.

[Resetting]

x [PARTY Auto Start]

[On]: Starts a PARTY or joins an existing

PARTY at the request of a networked

device compatible with the PARTY

STREAMING function.

x [Reset to Factory Default Settings]

You can reset the system settings to the

factory default by selecting the group of

settings. All the settings within the group

will be reset.

[Off]: Off.

x [Initialise Personal Information]

You can erase your personal information

stored in the system.

49^GB

• Keep the system and discs away from

components with strong magnets, such as

microwave ovens, or large loudspeakers.

• Do not place heavy objects on the system.

• Do not place metal objects in front of the

front panel. It may limit reception of

radio waves.

• Do not place the system in a place where

medical equipment is in use. It may cause

a malfunction of medical equipment.

• If you use a pacemaker or other medical

device, consult your physician or the

manufacturer of your medical device

before using the wireless LAN function.

Additional Information

Precautions

On safety

• Should any solid object or liquid fall into

the cabinet, unplug the system and have it

checked by qualified personnel before

operating it any further.

• Do not touch the AC power cord (mains

lead) with wet hands. Doing so may cause

an electric shock.

On operation

On power sources

If the system is brought directly from a cold

to a warm location, or is placed in a very

damp room, moisture may condense on the

lenses inside the unit. Should this occur, the

system may not operate properly. In this

case, remove the disc and leave the system

turned on for about half an hour until the

moisture evaporates.

If you are not going to use the system for a

long time, be sure to disconnect the system

from the wall outlet. To disconnect the AC

power cord (mains lead), grasp the plug

itself; never pull the cord.

On placement

• Place the system in a location with

adequate ventilation to prevent heat

build-up in the system.

• Although the unit heats up during

operation, this is not a malfunction. If you

continuously use this unit at a large

volume, the cabinet temperature of the

top, side and bottom rises considerably.

To avoid burning yourself, do not touch

the cabinet.

• Do not place the unit on a soft surface

(rugs, blankets, etc.) that might block the

ventilation holes.

• Do not install the system near heat

sources such as radiators, air ducts, or in

a place subject to direct sunlight,

excessive dust, mechanical vibration, or

shock.

On adjusting volume

Do not turn up the volume while listening

to a section with very low level inputs or no

audio signals. If you do, the speakers may

be damaged when a peak level section is

suddenly played.

On cleaning

Clean the cabinet, panel, and controls with

a soft cloth slightly moistened with a mild

detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent

such as alcohol or benzine.

On cleaning discs, disc/lens

cleaners

Do not use cleaning discs or disc/lens

cleaners (including wet or spray types).

These may cause the apparatus to

malfunction.

• Do not install the system in an inclined

position. It is designed to be operated in a

horizontal position only.

50^GB

On replacement of parts

In the events that this system is repaired,

repaired parts may be retained for reuse or

recycling purposes.

On Bluetooth

communication

• Bluetooth devices should be used within

approximately 10 meters (unobstructed

distance) of each other. The effective

communication range may become

shorter under the following conditions.

– When a person, metal object, wall or

other obstruction is between the devices

with a Bluetooth connection

On your TV’s color

If the speakers cause the color irregularity

on your TV screen, turn off the TV then

turn it on after 15 to 30 minutes. If color

irregularity persist, place the speakers

further away from the TV set.

– Locations where a wireless LAN is

installed

– Around microwave ovens that are in

use

– Locations where other electromagnetic

waves occur

• Bluetooth devices and wireless LAN

(IEEE 802.11b/g) use the same frequency

band (2.4 GHz). When using your

Bluetooth device near a device with

wirelessLANcapability, electromagnetic

interference may occur. This could result

in lower data transfer rates, noise, or

inability to connect. If this happens, try

the following remedies:

IMPORTANT NOTICE

Caution: This system is capable of

holding a still video image or on-screen

display image on your TV screen

indefinitely. If you leave the still video

image or on-screen display image

displayed on your TV for an extended

period of time, you risk permanent

damage to your TV screen. Plasma

display panel televisions and projection

televisions are especially susceptible to

this.

– Use this unit at least 10 meters away

from the wireless LAN device.

– Turn off the power to the wireless LAN

equipment when using your Bluetooth

device within 10 meters.

On moving the system

Before moving the system, make sure that

there is no disc inserted, and disconnect the

AC power cord (mains lead) from the wall

outlet (mains).

– Install this unit and Bluetooth device as

closer to each other as possible.

• The radio waves broadcast by this unit

may interfere with the operation of some

medical devices. Since this interference

may result in malfunction, always turn off

the power on this unit and Bluetooth

device in the following locations:

– In hospitals, on trains, in airplanes, at

gas stations, and any place where

flammable gasses may be present

– Near automatic doors or fire alarms

51^GB

• This unit supports security functions that

comply with the Bluetooth specification

to ensure secure connection during

communication using Bluetooth

technology. However, this security may

be insufficient depending on the setting

contents and other factors, so always be

careful when performing communication

using Bluetooth technology.

Notes about Discs

On handling discs

• To keep the disc clean, handle the disc by

its edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• Sony cannot be held liable in any way for

damages or other loss resulting from

information leaks during communication

using Bluetooth technology.

• Bluetooth communication is not

necessarily guaranteed with all Bluetooth

devices that have the same profile as this

unit.

• Bluetooth devices connected with this

unit must comply with the Bluetooth

specification prescribed by the Bluetooth

SIG, Inc., and must be certified to

comply. However, even when a device

complies with the Bluetooth

• Do not expose the disc to direct sunlight

or heat sources such as hot air ducts, or

leave it in a car parked in direct sunlight

as the temperature may rise considerably

inside the car.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a

specification, there may be cases where

the characteristics or specifications of the

Bluetooth device make it impossible to

connect, or may result in different control

methods, display or operation.

cleaning cloth.

Wipe the disc from the center out.

• Noise may occur or the audio may cut off

depending on the Bluetooth device

connected with this unit, the

communications environment, or

surrounding conditions.

• Do not use solvents such as benzine,

thinner, commercially available cleaners,

or anti-static spray intended for vinyl

LPs.

If you have any questions or problems

concerning your system, please consult

your nearest Sony dealer.

This system can only play a standard

circular disc. Using neither standard nor

circular discs (e.g., card, heart, or star

shape) may cause a malfunction.

Do not use a disc that has a commercially

available accessory attached, such as a

label or ring.

52^GB

Messages

Troubleshooting

[A new software version is available.

Please go to the “Setup” section of

the menu and select “Network

Update” to perform the update.]

appears on the TV screen.

t See [Network Update] (page 43) to

update the system to a latest software

version.

If you experience any of the following

difficulties while using the system, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

General

“PRTECT”, “PUSH” and “POWER”

appear alternately in the front panel

display.

t Press "/1 to turn off the system, and

check the following items after

“STBY” disappears.

The power does not turn on.

t Check that the AC power cord (mains

lead) is connected securely.

The remote control does not function.

t The distance between the remote

control and the unit is too far.

t The batteries in the remote control are

weak.

• Are you using only the supplied

speakers?

• Is anything blocking the ventilation

holes of the system?

• After checking the above items and

fixing any problems, turn on the

system. If the cause of the problem

cannot be found even after checking

all the above items, consult your

nearest Sony dealer.

The disc tray does not open and you

cannot remove the disc even after you

press Z.

t Try the following:

1 Hold down N and Z on the unit

for more than 5 seconds to open the

disc tray.

“LOCKED” appears in the front panel

display.

t Set the child lock function to off

(page 40).

2 Remove the disc.

3 Disconnect the AC power cord

(mains lead) from the wall outlet

(mains), then reconnect after

several minutes.

“D. LOCK” appears in the front panel

display.

t Contact your nearest Sony dealer or

local authorized Sony service facility.

The system does not work normally.

t Disconnect the AC power cord (mains

lead) from the wall outlet (mains), then

reconnect after several minutes.

“Exxxx” (x is a number) appears in

the front panel display.

t Contact your nearest Sony dealer or

local authorized Sony service facility

and give the error code.

53^GB

appears without any messages on

the entire TV screen.

t Contact your nearest Sony dealer or

local authorized Sony service facility.

An image is not displayed on the

entire TV screen.

t Check the setting of [TV Type] in

[Screen Settings] (page 44).

t The aspect ratio on the disc is fixed.

Picture

Color irregularity occurs on the TV

screen.

t If the speakers are used with a CRT-

based TV or projector, install the

speakers at least 0.3 meters from the

TV set.

There is no picture or the picture is

not output correctly.

t Check the output method on your

system (page 16).

t Hold down N and VOL – on the unit

for more than 5 seconds to reset the

video output resolution to the lowest

resolution.

t For BD-ROMs, check the [BD-ROM

24p Output] settings in [Screen

Settings] (page 45).

t If the color irregularity persists, turn

off the TV set once, then turn it on after

15 to 30 minutes.

t Make sure that no magnetic object

(magnetic latch on a TV stand, health

care device, toy, etc.) is placed near the

speakers.

There is no picture when you make an

HDMI cable connection.

t The unit is connected to an input

device that is not HDCP (High-

bandwidth Digital Content Protection)

compliant (“HDMI” in the front panel

does not light up) (page 16).

Sound

There is no sound.

t The speaker cords are not connected

securely.

t Check the speaker settings (page 38).

There is no sound from the TV via the

HDMI (OUT) jack when using the

Audio Return Channel function.

t Set [Control for HDMI] in [HDMI

Settings] of [System Settings] to [On]

(page 47). Also, set [Audio Return

Channel] in [HDMI Settings] of

[System Settings] to [Auto] (page 48).

t Make sure that your TV is compatible

with the Audio Return Channel

function.

The dark area of the picture is too

dark/the bright area is too bright or

unnatural.

t Set [Picture Quality Mode] to

[Standard] (default) (page 33).

Picture noise appears.

t Clean the disc.

t If the picture output from your system

goes through your VCR to get to your

TV, the copy-protection signal applied

to some BD/DVD programs could

affect picture quality. If you still

experience problems even when you

connect your unit directly to your TV,

try connecting your unit to the other

input jacks.

t Make sure that an HDMI cable is

connected to a jack on your TV that is

compatible with the Audio Return

Channel function.

54^GB

The system does not output sound of

TV programs correctly when

connected to a set-top box.

t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off]

(page 48).

Playback

The disc does not play.

t The region code on the BD/DVD does

not match the system.

t Moisture has condensed inside the unit

and may cause damage to the lenses.

Remove the disc and leave the unit

turned on for about half an hour.

t The system cannot play a recorded disc

that is not correctly finalized

t Check the connections (page 17).

Severe hum or noise is heard.

t Move your audio equipment away

from the TV.

t Clean the disc.

(page 58).

The sound loses stereo effect when

you play a CD.

File names are not displayed

correctly.

t The system can only display ISO

8859-1 compliant character formats.

Other character formats may be

displayed differently.

t Depending on the writing software

used, the input characters may be

displayed differently.

t Select stereo sound by pressing

AUDIO (page 34).

Distortion occurs in the sound of a

connected equipment.

t Reduce the input level for the

connected equipment by setting

[Attenuate - AUDIO] (page 45).

A disc does not start playing from the

beginning.

A sudden loud music is heard.

t The build-in sound demonstration is

activated. Press 2 – to reduce the

volume or press x to stop the

demonstration.

t Resume play has been selected. Press

OPTIONS and select [Play from start],

then press

Playback does not start from the

resume point where you last stopped

playing.

t The resume point may be cleared from

memory depending on the disc when

• you open the disc tray.

Tuner

Radio stations cannot be tuned in.

t Check that the antenna (aerial) is

connected securely. Adjust the antenna

(aerial).

t The signal strength of the stations is

too weak (when tuning in with

automatic tuning). Use manual tuning.

• you disconnect the USB device.

• you play other content.

• you turn off the unit.

55^GB

The language for the soundtrack/

subtitle or angles cannot be changed.

t Try using the BD’s or DVD’s menu.

t Multi-lingual tracks/subtitles or multi-

angles are not recorded on the BD or

DVD being played.

BRAVIA Internet Video

The picture/sound is poor/certain

programs display with a loss of detail,

especially during fast-motion or dark

scenes.

t Picture/sound quality may be poor

depending on Internet content

providers.

t Picture/sound quality may be

improved by changing the connection

speed. Sony recommends a connection

speed of at least 2.5 Mbps for standard-

definition video and 10 Mbps for high-

definition video.

Bonus contents or other data that are

contained in a BD-ROM cannot be

played.

t Try the following:

1 Remove the disc.

2 Turn the system off.

3 Remove and reconnect the USB

device (page 25).

4 Turn the system on.

t Not all videos contain sound.

5 Insert the BD-ROM with

BONUSVIEW/BD-LIVE.

The picture is small.

t Press V to zoom in.

USB device

“BRAVIA” Sync

([Control for HDMI])

The USB device is not recognized.

t Try the following:

1 Turn the system off.

The [Control for HDMI] function does

not work (“BRAVIA” Sync).

t Check that [Control for HDMI] is set

to [On] (page 47).

t If you change the HDMI connection,

turn the system off and on again.

t If power failure occurs, set [Control

for HDMI] to [Off], then set [Control

for HDMI] to [On] (page 47).

t Check the following and refer to the

operating instructions supplied with

the equipment.

2 Remove and reconnect the USB

device.

3 Turn the system on.

t Make sure that the USB device is

securely connected to the (USB)

port.

t Check if the USB device or a cable is

damaged.

t Check if the USB device is on.

t If the USB device is connected via a

USB hub, disconnect it and connect

the USB device directly to the unit.

• The connected equipment is

compatible with the [Control for

HDMI] function.

• The connected equipment’s setting

for the [Control for HDMI] function

is correct.

56^GB

t Devices that use a 2.4 GHz frequency

band, such as a microwave, Bluetooth,

or digital cordless device, may

interrupt communication. Move the

unit away from such devices, or turn

off such devices.

t The wireless LAN connection may be

unstable depending on the usage

environment, especially while using

the Bluetooth function of the system.

In this case, adjust the usage

Network connection

The system cannot connect to the

network.

t Check the network connection

(page 18) and the network settings

(page 48).

Wireless LAN

connection

environment.

The wireless router you want is not

shown in the wireless network list.

t Press RETURN to return to the

previous screen, and try [Wireless

Setup(built-in)] again. If the wireless

router you want is still not detected,

select [Add a new address.] from the

network list, then select [Manual

Registration] to input a network name

(SSID) manually.

You cannot connect your PC to the

Internet after [Wi-Fi Protected Setup

(WPS)] is performed.

t The wireless settings of the router may

change automatically if you use the

Wi-Fi Protected Setup function before

adjusting the settings of the router. In

this case, change the wireless settings

of your PC accordingly.

The system cannot connect to the

network or the network connection is

unstable.

Bluetooth device

t Check if the wireless LAN router is on.

t Check the network connection

(page 18) and the network settings

(page 48).

t Depending on the usage environment,

including the wall material, radio wave

reception conditions, or obstacles

between the system and the wireless

LAN router, the possible

Pairing cannot be done.

t Move the Bluetooth device closer to

the unit.

t Pairing may not be possible if other

Bluetooth devices are present around

the unit. In this case, turn off the other

Bluetooth devices.

t Delete the system from your Bluetooth

device and perform pairing again

(page 26).

communication distance may be

shortened. Move the system and the

wireless LAN router closer to each

other.

Connecting cannot be done.

t The pairing registration information

has been erased. Perform the pairing

operation again (page 26).

57^GB

Since Blu-ray Disc specifications are new and

evolving, some discs may not be playable

depending on the disc type and version. Also,

the audio output differs depending on the

source, connected output jack, and selected

audio settings.

BD-RE: Ver.2.1

BD-R: Ver.1.1, 1.2, 1.3 including organic

pigment type BD-R (LTH type)

BD-Rs recorded on a PC cannot be played if

postscripts are recordable.

A CD or DVD disc will not play if it has not

been correctly finalized. For more information,

refer to the operating instructions supplied with

the recording device.

There is no sound.

t Make sure this system is not too far

from the Bluetooth device, or this

system is not receiving interference

from a Wi-Fi network, other 2.4 GHz

wireless device, or microwave oven.

t Check that the Bluetooth connection is

made properly between this system

and the Bluetooth device.

t Pair this system and the Bluetooth

device again.

t Keep the system away from metal

objects or surfaces.

t Make sure “BT” function is selected.

t Adjust the volume of the Bluetooth

device first, if the volume level is still

too low, adjust the volume level on the

unit.

Discs that cannot be played

• BDs with cartridge

• BDXLs

• DVD-RAMs

• HD DVDs

• DVD Audio discs

• PHOTO CDs

• Data part of CD-Extras

• Super VCDs

• Audio material side on DualDiscs

The sound skips or fluctuates, or the

connection is lost.

t The unit and the Bluetooth device are

too far apart.

t If there are obstacles between the unit

and your Bluetooth device, remove or

avoid the obstacles.

t If there is equipment that generates

electromagnetic radiation, such as a

wireless LAN, other Bluetooth device,

or a microwave oven nearby, move

them away.

Notes on discs

This product is designed to play back discs

that conform to the Compact Disc (CD)

standard.

DualDiscs and some music discs encoded

with copyright protection technologies do

not conform to the Compact Disc (CD)

standard. Therefore, these discs may not be

compatible with this product.

Playable Discs

Note on playback

operations of a BD/DVD

Blu-ray Disc

BD-ROM

Some playback operations of a BD/DVD

may be intentionally set by software

producers. Since this system plays a

BD/DVD according to the disc contents the

software producers designed, some

playback features may not be available.

BD-R/BD-RE

DVD

DVD-ROM

DVD-R/DVD-RW

DVD+R/DVD+RW

CD-DA (Music CD)

CD-ROM

CD-R/CD-RW

58^GB

Note on double-layer

BDs/DVDs

The playback picture and sound may be

momentarily interrupted when the layers

switch.

Music

Audio Codec

Extension

MP3 (MPEG-1 Audio .mp3, .mka

Layer III)

AAC

.m4a, .aac , .mka

.wma

Region code (BD-ROM/DVD

VIDEO only)

WMA9 Standard

LPCM

.wav, .mka

Your system has a region code printed on

the bottom of the unit and will only play a

BD-ROM/DVD VIDEO (playback only)

FLAC

.flac, .fla

AC3

.ac3, .mka

labeled with identical region codes or

ALL

Photo

Photo Format

JPEG

Extension

.jpeg, .jpg, .jpe

Playable Types of Files

Video

PNG

.png

GIF

.gif

*6*10

MPO

.mpo

Video Codec

MPEG-1 Video

MPEG-2 Video

Container Extension

The system may not play this file format on a

DLNA server.

The system can only play standard definition

video on a DLNA server.

The system does not play DTS format files on

a DLNA server.

The system can only play Dolby Digital

format files on a DLNA server.

The system can support AVC up to Level 4.1.

The system does not play this file format on a

DLNA server.

The system can play AVCHD Ver.2.0 format

(AVCHD 3D/Progressive).

The system plays AVCHD format files that are

recorded on a digital video camera, etc.

The AVCHD format disc will not play if it has

not been correctly finalized.

The system does not play animated PNG or

animated GIF files.

.mpg, .mpeg

.m2ts, .mts

.avi

Xvid

AVI

MKV

.mkv

MPEG4/AVC

.mkv

MP4

.mp4, .m4v

.m2ts, .mts

.mov

Quick

Time

3gpp/

3gpp2

.3gp, .3g2,

.3gpp, .3gp2

VC1

.m2ts, .mts

.wmv, .asf

.mov

WMV9

ASF

*10

For MPO files other than 3D, the key image or

the first image is displayed.

Motion JPEG

Quick

Time

AVI

.avi

Video Format

Container Extension

*1*7

AVCHD

AVCHD Format

Folder

59^GB

Note

• Some files may not play depending on the file

format, the file encoding, the recording

condition, or DLNA server condition.

• Some files edited on a PC may not play.

• Some files may not be able to perform fast

forward or fast reverse function.

Supported Audio

Formats

Audio formats supported by this system are

as follows.

• The system does not play coded files such as

DRM and Lossless.

Function

• The system can recognize the following files or

folders in BDs, DVDs, CDs and USB devices:

– up to folders in the 9th layer (including the

root folder)

– up to 500 files/folders in a single layer

• The system can recognize the following files or

folders stored in the DLNA server:

– up to folders in the 19th layer

Format

“BD/DVD”

“TV”

(DIGITAL IN)

LPCM 2ch

LPCM 5.1ch,

LPCM 7.1ch

–

Dolby Digital

– up to 999 files/folders in a single layer

• The system can support frame rate:

– up to 60 fps for AVCHD only.

Dolby TrueHD,

Dolby Digital

Plus

–

– up to 30 fps for other video codecs.

• The system can support video bit rate up to

40 Mbps.

DTS

DTS-ES

• The system can support video resolution up to

1920 × 1080p.

• Some USB devices may not work with this

system.

• The system can recognize Mass Storage Class

(MSC) devices (such as flash memory or an

HDD), Still Image Capture Devices (SICDs),

and 101-key keyboards.

Discrete 6.1,

DTS-ES Matrix

6.1

DTS96/24

DTS-HD High

Resolution

Audio

–

• The system may not play high bit rate video files

from a DATA CD smoothly. It is recommended

to play high bit rate video files using a DATA

DVD or DATA BD.

DTS-HD Master

Audio

–

a: Supported format.

–: Unsupported format.

* Decoded as DTS core.

Note

For LPCM 2ch format, the supported sampling

frequency of the digital signal is up to 48 kHz

when using the “TV” function.

60^GB

Bluetooth Section

Communication system

Bluetooth Specification version 3.0

Output

Bluetooth Specification Power Class 2

Maximum communication range

Specifications

Amplifier Section

POWER OUTPUT (rated)

Front L/Front R:

Line of sight approx. 10 m

40 W + 40 W (at 3 ohms, 1 kHz,

1% THD)

Frequency band

2.4 GHz band

POWER OUTPUT (reference)

Front L/Front R:

40 W (per channel at 3 ohms, 1 kHz)

Subwoofer:

70 W (at 6 ohms, 80 Hz)

Inputs (Analog)

AUDIO IN

Sensitivity: 2 V/700 mV

Inputs (Digital)

TV (Audio Return Channel/OPTICAL)

Supported formats: LPCM 2CH (up to

48 kHz), Dolby Digital, DTS

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

A2DP 1.2 (Advanced Audio Distribution

Profile)

AVRCP 1.3 (Audio Video Remote

Control Profile)

Supported Codecs

SBC , AAC

Transmission range (A2DP)

20 Hz – 20,000 Hz (Sampling frequency

44.1 kHz, 48 kHz)

HDMI Section

Connector

The actual range will vary depending on factors

such as obstacles between devices, magnetic

fields around a microwave oven, static

electricity, cordless phone, reception

sensitivity, antenna’s performance, operating

system, software application, etc.

Bluetooth standard profiles indicate the purpose

of Bluetooth communication between devices.

Codec: Audio signal compression and

conversion format

Type A (19pin)

BD/DVD/CD System

Signal format system

NTSC/PAL

USB Section

(USB) port:

Type A (For connecting USB memory,

memory card reader, digital still camera,

and digital video camera)

Subband Codec

LAN Section

LAN (100) terminal

FM Tuner Section

System

PLL quartz-locked digital synthesizer

Tuning range

87.5 MHz – 108.0 MHz (50 kHz step)

Antenna (aerial)

100BASE-TX Terminal

Wireless LAN Section

Standards Compliance

IEEE 802.11 b/g/n

Frequency and Channel

2.4 GHz band: channels 1–13

FM wire antenna (aerial)

61^GB

Speakers

Front (SS-TSB121)

Dimensions (w/h/d) (approx.)

95 mm × 189 mm × 80 mm

Mass (approx.)

0.49 kg (with speaker cord)

Subwoofer (SS-WSB121)

Dimensions (w/h/d) (approx.)

177 mm × 280 mm × 245 mm

Mass (approx.)

2.7 kg (with speaker cord)

General

Power requirements

220 V – 240 V AC, 50/60 Hz

Power consumption

On: 60 W

Standby: 0.3 W (For details on the

setting, see page 40.)

Dimensions (w/h/d) (approx.)

430 mm × 50.5 mm × 296 mm incl.

projecting parts

Mass (approx.)

2.6 kg

Design and specifications are subject to

change without notice.

• Standby power consumption: 0.3W

• Over 85% power efficiency of amplifier

block is achieved with the full digital

amplifier, S-Master.

62^GB

Language Code List

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language

1027 Afar

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1053 Bashkir

1057 Byelorussian 1233 Armenian

1059 Bulgarian

1060 Bihari

1061 Bislama

1066 Bengali;

Bangla

1067 Tibetan

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

Code Language

1183 Irish

1186 Scots Gaelic 1349 Macedonian

1194 Galician

1196 Guarani

1203 Gujarati

1209 Hausa

1217 Hindi

Code Language

1347 Maori

Code Language

1507 Samoan

1508 Shona

1509 Somali

1511 Albanian

1512 Serbian

1513 Siswati

1514 Sesotho

1515 Sundanese

1516 Swedish

1517 Swahili

1521 Tamil

1350 Malayalam

1352 Mongolian

1353 Moldavian

1356 Marathi

1357 Malay

1358 Maltese

1363 Burmese

1365 Nauru

1369 Nepali

1376 Dutch

1379 Norwegian

1393 Occitan

1403 (Afan)Oromo 1529 Tigrinya

1226 Croatian

1229 Hungarian

1235 Interlingua

1239 Interlingue

1245 Inupiak

1248 Indonesian

1253 Icelandic

1254 Italian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311 Kirghiz

1525 Telugu

1527 Tajik

1528 Thai

1408 Oriya

1531 Turkmen

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1489 Russian

1572 Uzbek

1581 Vietnamese

1491 Kinyarwanda 1587 Volapük

1495 Sanskrit

1498 Sindhi

1501 Sangho

1502 Serbo-Croatian 1684 Chinese

1503 Singhalese

1505 Slovak

1613 Wolof

1632 Xhosa

1665 Yoruba

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334 Latvian;

Lettish

1697 Zulu

1171 Faroese

1174 French

1181 Frisian

1506 Slovenian

1345 Malagasy

1703 Not specified

63^GB

Parental Control/Area Code List

Code Area

2044 Argentina

2047 Australia

2046 Austria

2057 Belgium

2070 Brazil

2090 Chile

2092 China

2093 Colombia

2115 Denmark

2165 Finland

2174 France

2109 Germany

2200 Greece

2219 Hong Kong

2248 India

2238 Indonesia

2239 Ireland

2254 Italy

2276 Japan

2304 Korea

2333 Luxembourg

2363 Malaysia

2362 Mexico

2376 Netherlands

2390 New Zealand 2543 Taiwan

2499 Sweden

2086 Switzerland

2379 Norway

2427 Pakistan

2424 Philippines

2428 Poland

2436 Portugal

2489 Russia

2501 Singapore

2149 Spain

2528 Thailand

2184 United

Kingdom

64^GB

Index

Numerics

3D 24

3D Output Setting 44

DVD Parental Control 47

DVD-ROM 24p Output 45

A/V SYNC 34

Attenuate - AUDIO 45

Audio DRC 45

Audio Language 46

Audio Output 46

Audio Return Channel 48

Audio Settings 45

Auto Display 48

Easy Network Settings 49

Easy Setup 20

Auto Standby 48

FM Mode 35

Front panel 10

Front panel display 11

BD Audio MIX Setting 45

BD Hybrid Disc Playback Layer 47

BD Internet Connection 47

BD Parental Control 47

BD/DVD Menu Language 46

BD/DVD Viewing Settings 46

BD-LIVE 23

Gracenote Settings 48

BD-ROM 24p Output 45

Bluetooth 25

BONUSVIEW 23

HDMI

YCbCr/RGB (HDMI) 45

HDMI Deep Colour Output 45

BRAVIA Sync 37

Initialise Personal Information 49

Internet content 29

CD 58

Child Lock 40

Internet Settings 48

Cinema Conversion Mode 44

Connection Server Settings 49

Control for HDMI 37, 47

Internet Video Parental Control 47

Internet Video Unrated 47

Language Code List 63

65^GB

Main Unit illumination 47

Screen Format 44

Screen Saver 48

Multiplex broadcast sound 35

Screen Settings 44

SLEEP 39

Slideshow 33

Software License Information 48

Sound Effect 46

Speaker Settings 38, 46

Distance 38

Network Connection Diagnostics 49

Network Settings 48

Network Update 43

NFC 27

Level 39

Subtitle Language 47

System Information 48

OSD Language 47

Test Tone 39

Parental Control Area Code 47

Parental Control Settings 47

PARTY Auto Start 49

Password 47

TV Screen Size Setting for 3D 44

TV Type 44

Pause Mode 45

Play information 24

Playable discs 58

Update 43

USB 25

Quick Start Mode 48

WEP 19

WPA2-PSK (AES) 19

WPA2-PSK (TKIP) 19

WPA-PSK (AES) 19

WPA-PSK (TKIP) 19

RDS 37

Rear panel 11

Region code 59

Registered Remote Devices 49

Remote control 12

Remote Start 49

Renderer Access Control 49

Renderer Set-up 49

Reset to Factory Default Settings 49

Resetting 49

66^GB

The software of this system may be updated in the future. To find out details on any

available updates, please visit the following URL.

http://support.sony-europe.com/

Shark Vacuum Cleaner MV2010WC User Manual
Soleus Air Air Conditioner SG WAC 10ESE User Manual
Sony Ericsson Cell Phone K300c User Manual
Sony Headphones DR BT10CX User Manual
Sony Projector CX75 User Manual
Sony Satellite TV System SAT A1 User Manual
Sun Microsystems Computer Accessories 819468310 User Manual
Sun Microsystems Home Theater Server X4500 User Manual
SVA Security Camera CDR 1206 User Manual
Sylvania TV VCR Combo SSC191 User Manual