4-169-957-12(1)
CD/DVD Player
Reference Guide
DVP-SR600H
© 2010 Sony Corporation
MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR
THE PERSONAL AND
NONCOMMERCIAL USE OF
A CONSUMER FOR
Note about the discs
Do not use the following discs:
– A disc that has a non-standard
shape (e.g., card, heart).
– A disc with a label or sticker on
it.
DECODING VIDEO IN
COMPLIANCE WITH THE
MPEG-4VISUALSTANDARD
(“MPEG-4 VIDEO”) THAT
WAS ENCODED BY A
CONSUMER ENGAGED IN A
PERSONAL AND
Region code
Your player has a region code
printed on the back of the unit and
only will play commercial DVDs
(playback only) labelled with
identical region codes. This system
is used to protect copyrights.
NONCOMMERCIAL
ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO
PROVIDER LICENSED BY
MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE
IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER
USE. ADDITIONAL
ALL
Commercial DVDs labelled
will also play on this player.
Depending on the commercial
DVD, there may be no region code
indication, even though playing the
commercial DVD is prohibited by
area restrictions.
INFORMATION INCLUDING
THAT RELATING TO
PROMOTIONAL, INTERNAL
AND COMMERCIAL USES
AND LICENSING MAY BE
OBTAINED FROM MPEG LA,
LLC. SEE
DVP–XXXX
X
Region code
00V 00Hz
NO.
00W
0-000-000-00
HTTP://WWW.MPEGLA.COM
Copyrights
• Manufactured under license
from Dolby Laboratories. Dolby
and the double-D symbol are
trademarks of Dolby
About this manual
“DVD” may be used as a general
term for commercial DVDs,
DVD+RWs/DVD+Rs/DVD+R
DLs (+VR mode) and DVD-RWs/
DVD-Rs/DVD-R DLs (VR mode,
video mode).
Laboratories.
• Manufactured under license
under U.S. Patent #: 5,451,942 &
other U.S. and worldwide
patents issued & pending. DTS
and the Symbol are registered
trademarks and DTS Digital Out
and the DTS logos are
trademarks of DTS, Inc. Product
includes software. © DTS, Inc.
All Rights Reserved.
• “DVD+RW,” “DVD-RW,”
“DVD+R,” “DVD+R DL,”
“DVD-R,” “DVD VIDEO,” and
“CD” logos are trademarks.
• MPEG Layer-3 audio coding
technology and patents licensed
from Fraunhofer IIS and
Thomson.
• This DVD player incorporates
High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI Logo, and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC in the United
States and other countries.
• DivX®, DivX Certified® and
associated logos are registered
trademarks of DivX, Inc. and are
used under license.
• THIS PRODUCT IS
LICENSED UNDER THE
3
TIME/TEXT
Playback
Checks the elapsed time and the remaining
playback time.
Input the time code for picture and music search
(DVD and DivX video files only).
Control Menu display
ORIGINAL/PLAY LIST
Use the Control Menu to select a function and
to view related information.
Selects the type of title (DVD-VR mode) to be
played: ORIGINAL, or edited PLAY LIST.
Press DISPLAY.
To change the Control Menu display, press
DISPLAY again.
1,
2
PROGRAM*
*
Selects the title, chapter, or track to play in the
order you want.
1 Select “SET t,” then press ENTER and
select the title (T), chapter (C), or track (T)
you want to programme, and press ENTER.
(
)
)
1 2 2 7
DVD VIDEO
(
1 8 3 4
T
1 : 3 2 : 5 5
2 Repeat selecting the title, chapter, or track.
3 Press N.
OFF
OFF
SET
ON
1,
2
SHUFFLE*
*
Plays the title, chapter or track in random order.
1,
2
REPEAT*
*
PROGRAM
ENTER
DISPLAY
Quit:
Plays all titles/tracks/albums or a single title/
chapter/track/album/file repeatedly.
1,
2
A-B REPEAT*
*
A Control Menu items
Specifies the parts you want to play repeatedly.
B Currently playing title/Total number of
1 During playback, select “SET t,” then
press ENTER.
titles
The “A-B REPEAT” setting bar appears.
C Currently playing chapter/Total number
2 When you find the starting point (point A),
of chapters
press ENTER.
D Playing time
3 When you reach the ending point (point B),
press ENTER again.
E Selected disc type
F Playback status
PARENTAL CONTROL
G Selected item icon/menu options
H Operation message
I Selected Control Menu item
Set to prohibit playback on this player.
ON t: Sets the playback restrictions so that
the player will not play inappropriate discs
(Custom Parental Control).
PLAYER t: Playback of some DVD VIDEOs
can be limited according to a predetermined
level such as the age of the users. Scenes may be
blocked or replaced with different scenes
(Parental Control).
PASSWORD t: Enter a 4-digit password
using the number buttons. Also use this menu to
change the password.
Menu list
Item
Item Name, Function
TITLE/SCENE/TRACK
CHAPTER/INDEX
TRACK
OFF t: Turns off the Custom Parental Control
function.
Selects the title, scene, track, chapter, or index
to be played.
4
CUSTOM PICTURE MODE
Parental Control (limited playback)
You can set a playback limitation level.
Selects the picture quality that best suits the
programme you are watching.
STANDARD: Displays a standard picture.
DYNAMIC 1: Produces a bold dynamic picture
by increasing the picture contrast and the colour
intensity.
1 Select “PLAYER t,” then press ENTER.
Enter or re-enter your 4-digit password, then
press ENTER.
2 Press X/x to select “STANDARD,” then
press ENTER.
DYNAMIC 2: Produces a more dynamic
picture than DYNAMIC 1 by further increasing
the picture contrast and colour intensity.
CINEMA 1: Enhances details in dark areas by
increasing the black level.
CINEMA 2: White colours become brighter
and black colours become richer, and the colour
contrast is increased.
Press X/x to select an area, then press
ENTER.
When you select “OTHERS t,” select and
enter a standard code. See “PARENTAL
CONTROL AREA CODE LIST” at the end
of this manual.
3 Press X/x to select “LEVEL,” then press
ENTER.
Press X/x to select the level, then press
ENTER.
MEMORY t: Adjusts the picture in greater
detail.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
To turn off the Parental Control function, set
“LEVEL” to “OFF.”
If you forget your password, enter “199703” in
the password box, press ENTER, and then enter
a new 4-digit password.
SHARPNESS
Exaggerates the outline of the image to produce
a sharper picture.
OFF: Cancels this option.
1: Enhances the outline.
2: Enhances the outline more than 1.
AV SYNC
SETUP
Adjust the delay between the picture and sound.
This function is not effective when:
– you use the DIGITAL OUT (COAXIAL)
jack, and set “DOLBY DIGITAL,” “MPEG,”
or “DTS” in “AUDIO SETUP” to “DOLBY
DIGITAL,” “MPEG,” or “ON” respectively
(page 9).
– you connect a Dolby Digital or DTS-
compliant device via the HDMI OUT jack,
and set “DOLBY DIGITAL,” “MPEG,” or
“DTS” in “AUDIO SETUP” to “DOLBY
DIGITAL,” “MPEG,” or “ON” respectively
(page 9).
QUICK: Use Quick Setup to choose the desired
language of the on-screen display, the aspect
ratio of the TV and the audio output signal.
CUSTOM: In addition to the Quick Setup
setting, you can adjust various other settings
RESET: Returns the settings in “SETUP” to the
default setting.
1
ZOOM*
Magnifies the image up to four times the
original size, scroll using C/X/x/c.
1 Select “SET t,” then press ENTER.
The “AV SYNC” adjustment bar appears.
ANGLE
2 Press c repeatedly to adjust the delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
Changes the angle.
3 Press ENTER.
The selected setting takes effect.
To reset the “AV SYNC” setting, press CLEAR
in step 2.
,continued
5
TVS (TV Virtual Surround)
EFFECT*
Selects surround sound effect when connecting
a stereo TV or 2 front speakers. This only works
when playing a multichannel Dolby audio
sound track. Furthermore, if the player is set up
to output the signal from the DIGITAL OUT
(COAXIAL)/HDMI OUT jack, the surround
effect will only be heard when “DOLBY
DIGITAL” is set to “D-PCM” and “MPEG” is
OFF: Cancels the setting.
Selects the effects to be used for changing slides
during a slide show.
MODE 1: The images randomly cycle through
the effects.
MODE 2: The image sweeps in from top left to
bottom right.
MODE 3: The image sweeps in from top to
bottom.
MODE 4: The image sweeps in from left to
right.
MODE 5: The image stretches out from the
centre of the screen.
TVS DYNAMIC THEATER/
TVS DYNAMIC/
TVS WIDE: These modes are effective when
the distance between the front L and R speakers
is short, such as with built-in speakers on a
stereo TV.
TVS NIGHT: This feature is useful when you
want to hear the dialogue and enjoy the
surround sound effects of “TVS WIDE” at low
volume.
OFF: Turns off this function.
MEDIA
Selects the media type you want to play.
VIDEO: Plays video files.
PHOTO (MUSIC): Plays photo and music
files as a slide show. You can view a slideshow
with sound when music and photo files are
placed in the same album. If the playing time of
either music or photos is longer, the longer one
continues without sound or image.
PHOTO (BGM): Plays photo files with the
player’s internal background sound. To choose
the melody of the background sound, press
AUDIO repeatedly while viewing the image.
MUSIC: Plays music files. Press SUBTITLE
while playing music files that contain
TVS STANDARD: Use this setting when you
want to use TVS with 2 separate speakers.
1
*
To return to normal play, select “OFF” or press
CLEAR.
The play mode is cancelled when:
– you open the disc tray.
2
*
– you turn off the player.
◆Items for DATA discs
Item Item Name, Function
ALBUM
unsynchronized lyric information. The player
supports MP3 ID3 Lyrics only.
* Depending on the file, this function may not be
possible.
Selects the album that contains music and photo
files to be played.
FILE
To play VIDEO CDs with PBC
functions
When you start playing a VIDEO CD with
PBC (Playback control) functions, the menu
for your selection appears.
Selects the photo file to be played.
ALBUM
Selects the album that contains video file to be
played.
FILE
To play without using PBC
Selects the video file to be played.
DATE
Press ./> or the number buttons while
the player is stopped to select a track, then
press N or ENTER. To return to PBC
playback, press x twice, then press N.
Displays the date the picture was taken by a
digital camera.
INTERVAL*
Specifies the duration for which the slides are
displayed on the screen.
6
To lock the disc tray (Child Lock) About the CONTROL FOR HDMI
functions
You can lock the disc tray to prevent it being
opened by mistake.
You can control the player by connecting to a
When the player is in standby mode, press in
TV compatible with the CONTROL FOR
order, O RETURN, ENTER, and [/1 on the
HDMI function with an HDMI cord (not
remote.
supplied).
The player turns on and “
” (LOCKED)
appears on the front panel display. The Z
button on the player does not work while the
Child Lock is set.
To enjoy the features
• One-Touch Play
With one touch of the N button on the
remote, the player and your TV
automatically turn on and the TV’s input is
switched to the player. Playback starts
automatically.
The TV’s input will also switch to the
player automatically, in the following cases:
– You press the N, TOP MENU, MENU,
or DISPLAY button on the remote.
Note that these buttons are not effective
when you play audio CD or music files in
“MUSIC” mode.
To unlock the disc tray
When the player is in standby mode, press in
order, O RETURN, ENTER, and \/1 on the
remote again.
Controlling TVs with the remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
When you replace the batteries of the remote,
set the appropriate code number again.
– If a disc with auto play function is loaded.
– If you push the disc tray to close.
• System-Power Off
When you turn the TV off by using the [/1
button on the TV’s remote, the components
compatible with CONTROL FOR HDMI
function turn off automatically.
1 While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code.
2 Release TV [/1.
Code numbers of controllable TVs
About ‘BRAVIA Sync’ display
Sony
01 (default)
You can control the player by connecting to a
Sony TV (compatible with ‘BRAVIA Sync’
only) and selecting the SYNC MENU button
on the TV’s remote/option menu.
Some TVs may have other buttons available
to turn on the ‘BRAVIA Sync’ display, or
require setting on the TV. Depending on the
TV, the setting display may appear before the
‘BRAVIA Sync’ display. Refer also to the
operating instructions supplied with the TV.
The ‘BRAVIA Sync’ display will show
different items depending on the disc type.
Hitachi
JVC
24
33
LG/Goldstar
Panasonic
Philips
Samsung
Sharp
76
17, 49
06, 08, 72
71
29
Toshiba
38
Viewing a high quality slide
show (PhotoTV HD)
If you have a Sony TV that is compatible with
“PhotoTV HD,” you can enjoy the best
quality images. “PhotoTV HD” is activated
when the player is connected to a TV by an
HDMI cord and “JPEG RESOLUTION” in
“HDMI SETUP” is set to “PhotoTV HD”
(page 10).
(Example: ‘BRAVIA Sync’ display when
playing a DVD VIDEO)
Select an item using C/X/x/c and then press
ENTER.
• When playing a DVD VIDEO: Displays
MENU and TOP MENU.
,continued
7
• When playing in DVD-VR mode: Displays
., >, and chapter number.
• When playing a CD, VIDEO CD or Super
VCD (without PBC): Displays ., >,
and track number.
• When playing a VIDEO CD or Super VCD
(with PBC): Displays ., > and scene
number. When the disc’s menu appears, you
can select an item by pressing X/x.
• When playing video, photo, and music files:
Displays MENU and PICT. NAVI (Picture
Navigation).
CUSTOM Menu
You can adjust various settings.
Press DISPLAY when the player is in stop
mode, select
(SETUP), and then
select “CUSTOM.” The CUSTOM menu
appears.
Menu list
Item
Item Name, Function
LANGUAGE SETUP
To change the display
Press the SYNC MENU button on the TV’s
remote repeatedly to turn on or change the
display. ‘BRAVIA Sync’ display and Control
Menu are displayed alternately.
OSD (On-Screen Display): Switches the
display language on the screen.
1
MENU* : Selects the desired language for the
disc’s menu (DVD VIDEO only).
1
AUDIO* : Switches the language of the sound
To turn off the display
Press the RETURN or SYNC MENU button
on the TV’s remote repeatedly.
track. When you select “ORIGINAL,” the
language given priority in the disc is selected.
(DVD VIDEO only)
1
SUBTITLE* : Switches the language of the
subtitle recorded on the DVD VIDEO. When
you select “AUDIO FOLLOW,” the language
for the subtitles changes according to the
language you selected for the sound track.
(DVD VIDEO only)
SCREEN SETUP
TV TYPE: Selects the aspect ratio of the
connected TV.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
SCREEN SAVER: When set to “ON,” the
screen saver appears when the player is in pause
or stop mode for 15 minutes. Press N to turn
off the screen saver.
BACKGROUND: Selects the background
colour or picture on the TV screen. If you set
“JACKET PICTURE,” even though the disc
does not contain a jacket picture, the
“GRAPHICS” picture appears.
8
PROGRESSIVE (COMPONENT OUT
ONLY)* : Sets to “ON” if your TV aspects
AUDIO SETUP
2
3
AUDIO DRC (Dynamic Range Control)* :
Set according the surrounding environment. Set
to “TV MODE” when the smallest sounds are
indiscernible, or set to “WIDE RANGE” when
the listening environment is good, for example,
in a home movie theatre.
progressive format signals.
MODE (PROGRESSIVE): This setting is
effective only when you set “PROGRESSIVE
(COMPONENT OUT ONLY)” to “ON.” If you
select “AUTO,” the player detects the format
(film-based or video-based), and converts to the
appropriate version.
3
DOWNMIX* : Switches the method for
mixing down to 2 channels when you play a
DVD which has rear sound elements (channels),
or is recorded in Dolby Digital format.
Normally select “DOLBY SURROUND.”
DIGITAL OUT: Selects if audio signals are
output via the DIGITAL OUT (COAXIAL)/
HDMI OUT jack. When you select “ON,” set
also the following “DOLBY DIGITAL,”
“MPEG,” “DTS,” or “48kHz/96kHz PCM.”
DOLBY DIGITAL: Selects the type of Dolby
Digital signal. Set to “D-PCM” when the player
is connected to an audio component without a
built-in Dolby Digital decoder.
MPEG: Selects the type of MPEG audio signal.
Set to “MPEG” when the player is connected to
an audio component with a built-in MPEG
decoder.
DTS: Selects the type of DTS audio signal. Set
to “ON” when you play a DVD VIDEO with
DTS sound tracks. Do not set to “ON” when
you connect the player to an audio component
without a DTS decoder.
4:3 OUTPUT: This setting is effective only
when you set “TV TYPE” to “16:9.” Select
“FULL” when you can change the aspect ratio
on your TV.
CUSTOM SETUP
AUTO STANDBY: Sets the Auto Standby
setting on or off. If you select “ON,” the player
enters standby mode when left in stop mode for
more than 30 minutes.
AUTO PLAY: When set to “ON,” the player
automatically starts playback when the player is
turned on by a timer (not supplied).
PAUSE MODE: Selects the picture in pause
mode. Normally select “AUTO.” When the
picture is output in high resolution, set to
“FRAME.” (DVD only)
TRACK SELECTION: Gives the sound track
which contains the highest number of channels
priority when you play a DVD VIDEO on
which multiple audio formats (PCM, MPEG
audio, DTS, or Dolby Digital format) are
recorded. If you select “AUTO,” priority is
given. (DVD VIDEO only)
48kHz/96kHz PCM: Selects the sampling
frequency of the digital audio output signal.
(DVD VIDEO only)
IMAGE QUALITY: Selects the priority
display to either high quality image or quick
speed. (Photo files only)
HDMI SETUP
You can adjust items related to HDMI
connection.
MULTI-DISC RESUME: Switches the Multi-
disc Resume setting on or off. Resume playback
can be stored in memory for up to 6 different
DVD VIDEOs/VIDEO CDs. If you start the
settings again, the resume point is cleared.
(DVD VIDEO/VIDEO CD only)
2
HDMI RESOLUTION* : Selects the type of
video signal output from the HDMI OUT jack.
If “AUTO (1920×1080p)” (default) is selected,
the player outputs video signals of the highest
resolution acceptable for your TV. If the picture
is not clear, unnatural or otherwise not to your
satisfaction, try another option that suits the
disc, TV/projector, etc. For details, refer also to
the instruction manual supplied with the TV/
projector, etc.
®
DivX VOD: Displays the registration code and
deactivation code for this player. For more
the Internet. You can play DivX video files as
many times as the preset number. The following
occurrences are counted:
You cannot select this when “JPEG
RESOLUTION” is set to “PhotoTV HD.”
– when the disc tray is opened.
– when another file is played.
– when the “MEDIA” setting is changed.
– when the player is turned off(including the Auto
Standby function).
,continued
9
JPEG RESOLUTION: Selects the type of
JPEG resolution so that you can enjoy a high
picture quality via HDMI connection.
This setting is effective only when you set “TV
TYPE” to “16:9.” You cannot select this when
“HDMI RESOLUTION” is set to “720×480/
Information
Troubleshooting
576p.” “(1920×1080i) HD
” and
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
“(1920×1080i) HD” are effective only when
you set “HDMI RESOLUTION” to
“1920×1080i.” If you set this setting to
“PhotoTV HD,” “(1920×1080i) HD
” or
“(1920×1080i) HD,” the effect, rotation, and
zoom functions are not available.
YCBCR/RGB (HDMI): Selects the type of
HDMI signal output from the HDMI OUT jack.
Set to “RGB” if the playback picture is
distorted. You cannot select this when “JPEG
RESOLUTION” is set to “PhotoTV HD.”
AUDIO (HDMI): Selects the type of audio
signal output from the HDMI OUT jack. Set to
“PCM” if you connect the player to a TV that is
not compatible with DOLBY DIGITAL/DTS/
MPEG signals.
CONTROL FOR HDMI: Switches the
Control For HDMI setting on or off. Set to
“ON” when you use the Control For HDMI
function.
LANGUAGE FOLLOW: Switches the
languages of the DVD player to the same as the
current TV OSD language. You cannot select
this when “CONTROL FOR HDMI” is set to
“OFF.”
The power is not turned on.
c Check that the power cord (mains lead) is
connected securely.
There is no picture/picture noise appears.
c Re-connect the connecting cord securely.
c The connecting cords are damaged.
c Check the connection to your TV and switch
the input selector on your TV so that the signal
from the player appears on the TV screen.
c The disc is dirty or flawed.
c Press [/1 to turn off the player, and enter
“369” using the number buttons on the remote,
then press [/1 to turn on the player again.
There is no sound.
c Re-connect the connecting cord securely.
c The connecting cord is damaged.
c The player is in pause mode or in Slow-motion
Play mode.
1
*
When you select “OTHERS t,” select and
enter a language code. See “LANGUAGE
CODE LIST” at the end of this manual.
If the picture does not appear normally or goes
blank, reset the setting. Press [/1 to turn off,
enter “369,” and then press [/1 to turn on the
player again.
2
c The player is in fast forward or fast reverse
mode.
*
The remote does not function.
c The batteries in the remote are weak.
c The remote is not pointed at the remote sensor
on the player.
3
*
This function affects the output from the
following jacks:
– AUDIO OUT L/R jacks.
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when “DOLBY DIGITAL” is set to
“D-PCM.”
c When you operate the player by pressing
buttons on the remote in sequence, press the
buttons within 5 seconds of each other.
The disc does not play.
c The disc is turned over.
Insert the disc with the playback side facing
down.
c The disc is skewed.
c The player cannot play certain discs.
c The region code on the DVD does not match
the player.
c Moisture has condensed inside the player.
c The player cannot play a recorded disc that is
not correctly finalized.
10
The player does not operate properly.
c When static electricity, etc., causes the player
to operate abnormally, unplug the player.
Display language on the screen does not
switch automatically.
c Turn off any of the DVD player’s display
screens, and try again.
The disc tray does not open and “
(LOCKED) appears on the front panel
display.
”
Playable file format
Video: MPEG-1 (Cyber-shot data)/MPEG-4
1
(simple profile)* /DivX
The disc tray does not open and
Photo: JPEG (DCF format)
“
” (TRAY LOCKED) appears on
Music: MP3 (except for mp3PRO)/WMA
1,
2
1,
2
(except for WMA Pro)* * /AAC* * /
the front panel display.
LPCM/WAVE
c Contact your Sony dealer or local authorized
1
Sony service facility.
*
Files with copyright protection (Digital Right
Management) cannot be played.
The player will not play coded files, such as
Lossless.
2
“C13” appears on the front panel display.
c Clean the disc with a cleaning cloth or check
its format.
*
Supported extensions: “.avi”, “.divx”,
“.mpg”, “.mpeg”, “.mp4”, “.jpg”, “.mp3”,
“.wma”, “.m4a”, “.wav”
Supported discs: DVD, DVD±RW/±R/±R
DL, Music CD/Super VCD, CD-R/-RW
“C31” appears on the front panel display.
c Re-insert the disc correctly.
There is no picture/sound when connected
• DATA CDs recorded according to ISO
9660 Level 1/Level 2, or its extended
format, Joliet.
• DATA DVDs recorded according to UDF.
• The player will play any file in the above,
even if the file format differs. Playing such
data may generate noise that can result in
speaker damage.
• To play a complex hierarchy of folders may
take some time. Create albums with no
more than two hierarchies.
• Some video, photo, and music files may not
play, depending on the encoding/recording
condition.
to the HDMI OUT jack.
c Change the “HDMI RESOLUTION” setting
in “HDMI SETUP.” The problem may be
solved.
c The equipment connected to the HDMI OUT
jack does not conform to the audio signal
format, in this case set “AUDIO (HDMI)” in
“HDMI SETUP” to “PCM.”
c Try the following: 1Turn the player off and
on again. 2Turn the connected equipment off
and on again. 3Disconnect and then connect
the HDMI cord again.
The CONTROL FOR HDMI function does
not work.
• To start playback and proceed to the next or
another album/file may take some time.
• The player will recognize a maximum of
200 albums and 600 files. It can recognize
up to 300 music files and 300 photo files
when “PHOTO (MUSIC)” is selected.
• The player may not play a combination of
two or more video files.
• The player cannot play a video file of size
more than 720 (width) × 576 (height)/2 GB.
• Depending on the file, playback may not be
smooth. You are recommended to create the
file at a lower bit rate.
c Make sure that the TV’s input is switched to
DVD player so that the signal from the player
appears on the TV screen, and “CONTROL
FOR HDMI” is set to “ON.”
‘BRAVIA Sync’ display does not appear.
c Turn off any display of the DVD player
displays. Then, try again.
Your TV automatically turns on or the TV’s
input is switched to the player.
c “CONTROL FOR HDMI” is set to “ON.”
Switch this function to “OFF”.
• The player may not play back the high bit
rate video file on the DATA CD smoothly.
You are recommended to play back using
DATA DVD.
,continued
11
• When playing visual data that is not
supported by MPEG-4 format, only sound
will be heard.
General
• Power requirements: 220-240 V AC, 50/
60 Hz
• Power consumption: 10 W
• Dimensions (approx.): 320 × 38 × 209 mm
(width/height/depth) incl. projecting parts
• Mass (approx.): 1.2 kg
• Operating temperature: 5 °C to 35 °C
• Operating humidity: 25 % to 80 %
Note about recordable media
Some recordable media cannot be played on
this player due to the recording quality or
physical condition of the disc, or the
characteristics of the recording device and
authoring software. The disc will not play if it
has not been correctly finalized. Also some
DATA discs created in Packet Write format
cannot be played.
Supplied accessories
• Audio/Video cord (phono plug × 3 y
phono plug × 3) (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
For player that cannot play images that
contain a copy protection only
Images in DVD-VR mode with CPRM
(Content Protection for Recordable Media)
protection may not be played.
Specifications and design are subject to
change without notice.
Note on playback operations of DVDs and
VIDEO CDs
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
software producers. Since this player plays
DVDs and VIDEO CDs according to the disc
contents the software producers designed,
some playback features may not be available.
Also, refer to the operating instructions
supplied with the DVDs or VIDEO CDs.
Note on discs
This unit is designed to playback discs that
conform to the Compact Disc (CD) standard.
DualDiscs and some music discs encoded
with copyright protection technologies do not
conform to the Compact Disc (CD) standard.
Therefore, these discs may not be compatible
with this unit.
Specifications
System
Laser: Semiconductor laser
Outputs
• AUDIO OUT (L/R): Phono jack
• DIGITAL OUT (COAXIAL): Phono jack
• COMPONENT VIDEO OUT(Y, PB, PR):
Phono jack
• VIDEO OUT: Phono jack
• HDMI OUT: HDMI 19 pin-Standard
Connector
12
LANGUAGE CODE LIST
1 page 8
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1358 Maltese
1363 Burmese
1365 Nauru
1369 Nepali
1376 Dutch
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1525 Telugu
1527 Tajik
1528 Thai
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703 Not specified
ISO 639: 1988 (E/F) standard
PARENTAL CONTROL AREA CODE LIST
1 page 4
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
2304 Korea
2363 Malaysia
2362 Mexico
2149 Spain
2376 Netherlands
2390 New Zealand
2379 Norway
2499 Sweden
2086 Switzerland
2528 Thailand
2184 United
Kingdom
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2092 China
2115 Denmark
2501 Singapore
z To find out useful hints, tips and information about Sony products and services please visit:
4-169-957-12(1)
Printed in China
|