CAUTION
Music discs encoded with copyright
Basic Operations
e use of optical instruments with this product will
increase eye hazard.
3-096-718-11(1)
protection technologies
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
Notes on MP3 discs
When the disc is inserted, the unit reads all the files on that disc.
During this time, “READING” is displayed. If there are many folders
or non-MP3 files on the disc, it may take a long time for play to
begin or for the next MP3 file to start play.
We recommend that you do not save unnecessary folders or files
other than MP3 ones in the disc to be used for MP3 listening.
A folder that does not include an MP3 file is skipped.
Maximum number of files: 255
Maximum number of folders: 150 (including the root folder)
Maximum number of folders and files in total: 256
Maximum directory levels: 8
Folder names and file names can be displayed with up to 30
characters including quotation marks.
Information
For customers in the USA
Playing a CD/MP3 disc
Recording on a tape
CD Radio
Use buttons on the unit for the operation.
1
Press PUSH OPEN/CLOSE
on the unit, and
is equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. ese limits are designed
to provide reasonable protection against harmful
interference in a residential installation. is equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
on the unit to open the tape
compartment and insert a blank tape with the side
you want to record on facing upward. Use TYPE I
(normal) tape only. Close the compartment.
place a disc with the label side up on the CD
compartment.
1
Press
Cassette-Corder
Operating Instructions
To close the CD compartment, press PUSH OPEN/
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
CLOSE
on the unit.
US
2
Select the program source you want to record.
To record from the CD player, press
and place a CD.
on the unit
For customers in the USA
Please register this product on line at
e characters A - Z, 0 - 9, and _ can be displayed on this unit.
Other characters are displayed as “_”.
To record from the radio, tune in the station you want
(see “Listening to the radio”).
Owner’s Record
Proper registration will enable us to send you periodic
mailings about new product, services and other
important announcements. Registering your product
will also allow us to contact you in the unlikely event
that the product needs adjustment or modification.
ank you.
e model number is located at the bottom and the serial number is located in the battery compartment.
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
is unit conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3 tag
format. When the file has the ID3 tag information, “song title”, “artist
name” and “album name” can be displayed. If the file does not have
the ID3 tag information, “NO TITLE” appears instead of song title,
“NO ARTIST” appears instead of artist name and “NO ALBUM”
appears instead of album name. e ID3 tag information can be
displayed with up to 15 characters.
3
Press
on the unit to start recording (
is
depressed automatically).
Model No.
Serial No.
To
Press
Pause recording
on the unit.
Press the button again to
resume recording.
— Reorient or relocate the receiving antenna.
.
When naming, be sure to add the file extension “mp3” to the file
name.
2
Press
on the unit (
on the remote)
— Increase the separation between the equipment and
e unit plays all the tracks/MP3 files once.
If you put the extension “mp3” to a file other than an MP3 file, the
unit cannot recognize the file properly and will generate random
noise that could damage your speakers.
receiver.
When you place MP3 discs, “MP3” appears in the
display aſter the unit reads the file information.
CFD-G700CP
© 2007 Sony Corporation Printed in China
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Stop recording
on the unit.
e file name does not correspond to the ID3 tag.
Audio CD
— Consult the dealer or an experienced radio/TV
Tips
technician for help.
Adjusting the volume or the audio emphasis will not affect the
is device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) is device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
recording level.
Listening to the radio
For the best results, use the AC power as a power source for
recording.
1
Press RADIO/BAND AUTO PRESET
on the unit
WARNING
To erase a recording, proceed as follows:
1 Insert the tape whose recording you want to erase.
2 Make sure that “TAPE” is displayed. (If “TAPE” is not displayed,
Track number Playing
time
(RADIO/BAND
on the remote) repeatedly.
Each time you press the button, the indication changes
as follows:
“FM” “AM”
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
press
on the unit or press FUNCTION
on the remote
MP3 disc
until it appears in the display.)
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
3 Press
on the unit.
2
Hold down TUNE + or –
until the frequency
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
digits begin to change in the display.
e unit automatically scans the radio frequencies and
stops when it finds a clear station.
MP3 file number After the song title is displayed,
the playing time* will appear.
Notes on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
If you cannot tune in a station, press TUNE + or –
*
If the playing time is more than 100 minutes, it appears “--:--” in
the display.
is symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.
Connect the apparatus to an easily accessible AC
outlet. Should you notice an abnormality in the
apparatus, disconnect the main plug from the AC outlet
immediately.
* VOL + (VOLUME + on the remote) ,
and
(on the
To
Press
unit) have a tactile dot.
Pause playback
on the unit ( on the remote)
. To resume play, press it again.
Tip
If the FM broadcast is noisy, press MODE
until “Mono” appears in
the display and the radio will play in monaural.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
is symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
Stop playback
.
Before using the unit
Go to the next
track/MP3 file
.
To turn on/off the power
Playing a tape
Use buttons on the unit for the operation.
Go back to the
previous track/
MP3 file
.
.
Press POWER
To adjust the volume
1
Press
on the unit, and insert the tape into
.
Select a folder on
+ to go forward and – to go
Press VOL +, – (VOLUME +, – on the remote)
the tape compartment with the side you want to
play facing upward. Use TYPE I (normal) tape only.
Close the compartment.
an MP3 disc
backward
.
To listen through headphones
Connect the headphones to the (headphones) jack .
Locate a point
while listening to
the sound
(forward) or (backward)
while playing and hold it until
you find the point. ( or
on the remote)
Make sure there is no slack in the tape to avoid
damaging the tape or the unit.
To select the sound characteristic
Press ROCK, DANCE, SALSA, REGGAETON or FLAT
Specifications
Power sources
Locate a point
while observing
the display
(forward) or (backward)
in pause and hold it until you
find the point. ( or on
the remote)
to select the kind of audio emphasis that you want.
(On the remote, press SOUND
repeatedly.)
Battery life
AUDIO POWER SPECIFICATIONS
For CD radio cassette-corder:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven from 1 000 - 10 000 Hz; rated 3 W
per channel-minimum RMS power, with no more than 10 % total harmonic
distortion in AC operation.
To reinforce the bass sound
Press POWER DRIVE WOOFER (WOOFER on
Remove the CD
FM recording
PUSH OPEN/CLOSE .
the remote)
the display.
to select
or
on
Sony R20P: approx. 6 h
Sony alkaline LR20: approx. 18 h
Tape playback
Woofer with 4-ohm loads, driven from 50 - 150 Hz; rated 6 W minimum RMS
power, with no more than 10 % total harmonic distortion in AC operation.
is more effective. When the
Tips
Playback starts from the track/MP3 file you last stopped playing
(Resume play). During stop, the track/MP3 file number to be played
is displayed.
WOOFER function works, the ring on the front panel
lights up.
2
Press
on the unit.
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 6 h
CD playback
Other specifications
To return to normal sound, press the button repeatedly
until the indication disappears from the display.
e unit starts playing.
CD player section
System
Compact disc digital audio system
Laser diode properties
To cancel the resume play (to start play from the beginning of the
first track/MP3 file), press
while the CD is stopped. When you
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 4 h
To
Press
open the CD compartment or turn off the unit, the resume play is
Notes
also canceled.
2
to a wall outlet
Pause playback
on the unit. To resume play,
press it again.
Emission duration: Continuous
Laser output: Less than 44.6 µW
(is output is the value measured at a distance of
about 200 mm from the objective lens surface on the
optical pick-up block with 7 mm aperture.)
Number of channels
While the sleeping timer is on, the ring does not light, even if the
1
to AC IN
WOOFER function is used.
Note
Dimensions
When you use the headphones, the WOOFER function does not
work.
Approx. 551 × 247 × 370 mm (w/h/d)
You cannot locate a specific track if “SHUF” or “PGM” is lit in the
display.
Stop playback
on the unit.
(21 3
Mass
× 9
/
× 14
inches) (incl. projecting parts)
3
5
4
/
4
8
/
Press
, and then press MODE
“PGM” disappear from the display.
repeatedly until “SHUF” and
Fast-forward or
rewind*
or
(rewind or fast
Connect the AC power cord or insert eight R20 (size D) batteries (not supplied) into the battery compartment .
Approx. 8.4 kg (18 lb. 9 oz) (incl. batteries)
Supplied accessories
2
forward) on the unit.
Frequency response
Notes
AC power cord (1)
Remote control (1)
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Eject the cassette
on the unit.
Example of folder structure and playing order
e playing order of the folders and files is as follows:
Replace the batteries when the OPR/BATT indicator dims or when the unit stops operating.
Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit.
Below measurable limit
Design and specifications are subject to change without notice.
* When the tape is wound to the end, press
to release
or
.
To use the unit on batteries, disconnect the AC power cord from the unit.
When you operate the unit on batteries, you cannot turn on the unit using the remote.
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Optional accessories
Sony MDR headphones series
Folder
MP3 file
Cassette-corder section
Recording system
Preparing the remote
Insert two R6 (size AA) batteries (not supplied).
4-track 2 channel stereo
Fast winding time
Approx. 150 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 70 - 13 000 Hz
General
Speaker
Full range: 10 cm (4 in.) dia., 3.2 , cone type (2)
Woofer: 13 cm (5 1
/
in.) dia., 4 , cone type (1)
8
Tweeter: 2 cm (13/16 in.) dia. (2)
Input
Built-in audio cable with stereo-mini plug: Minimum input level 245 mV
AUDIO IN Jack (stereo minijack): Minimum input level 245 mV
Replacing batteries
Outputs
With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all
the batteries with new ones.
Headphones jack (stereo minijack)
For 16 - 68 impedance headphones
Power output
4 W + 4 W (at 3.2 , 10% harmonic distortion)
Woofer:
12 W (at 4 , 10% harmonic distortion)
Power requirements
For CD radio cassette-corder:
120 V AC, 60 Hz
12 V DC, 8 R20 (size D) batteries
For remote control:
3 V DC, 2 R6 (size AA) batteries
Power consumption
AC 28 W
|