Sonance Virtuoso® SSDR-Series
Single-Stereo Speakers
Virtuoso V833ssDR
SPECIFICATIONS
Sonance Virtuoso® SSDR-Series Speakers
V833SSDR
Tweeter:
Two ¾" (19mm) Silk domes, Ferrofluid cooled
Sonance Virtuoso SSDR® speakers combine the outputs of your
amplifier’s left and right stereo channels, and play both signals
from just one speaker. Totally redesigned for 2006, these new
Virtuoso SSDR speakers incorporate advanced driver materials
and technology that give them stunning musical performance.
Midrange:
Two 3" (76mm) Carbon Fiber cones, rubber
surrounds
Woofer:
8" (203mm) Carbon Fiber cone, dual voice coil,
rubber surround, pivoting
Frequency Response:
Impedance:
Power Handling:
SPL:
Grille Material:
Adjustments:
Dimensions (Dia. x D):
Cutout Diameter:
Shipping Weight:
32Hz – 20kHz 3dB
6 Ohms nominal; 4 Ohms minimum
5 Watts minimum; 150 Watts maximum
91dB SPL (2.83V 1 meter)
Perforated Aluminum
Tweeter and midrange level ( 3dB)
11¼" x 6" (286mm x 152mm)
101/8" (257mm)
Virtuoso SSDR speakers are ideal for use in hallways, bath-
rooms, closets, or any location where a pair of stereo speakers
would be impractical. The Virtuoso SSDR’s innovative fully-
pivoting design delivers outstanding musical performance from
a wide variety of challenging installation locations.
Virtuoso V833SSDR
10 lbs. (4.5kg) Each
Features:
V831SSDR
Tweeter:
Midrange:
• Completely redesigned for 2006 with dramatically improved
sound quality and quicker/easier installation.
Two ¾" (19mm) Silk domes, Ferrofluid cooled
Two 3" (76mm) Polypropylene cones, rubber
surrounds
8" (203mm) Polypropylene cone, dual voice
coil, rubber surround, pivoting
• Fully-pivoting woofer assembly directs sound at listeners, for
superior sound even when placement options are limited.
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille Material:
Adjustments:
Dimensions (Dia. x D):
Cutout Diameter:
Shipping Weight:
45Hz – 20kHz 3dB
• Advanced driver materials deliver extremely accurate musical
performance.
8 ohms nominal; 6 ohms minimum
5 Watts minimum; 100 Watts maximum
89dB SPL (2.83V 1 meter)
Perforated Aluminum
None
11¼" x 6" (286mm x 152mm)
101/8" (257mm)
8 lbs. (3.6kg) Each
Virtuoso V831SSDR
• 8” Diameter woofers deliver deep, powerful bass.
• Graphite-Reinforced ABS (GRABS) woofer baskets reduce
resonances.
• 3-Position midrange and tweeter adjustment switches (V833ssDR).
11¼”
• Exclusive new FastMount® tabs hold speaker in the mounting
hole during installation, allowing installer to let go of the speaker
to pick-up tools or other items.
• RotoLock® mounting system simplifies installation.
DIMENSIONS
(all Virtuoso SSDR-Series speakers)
1
/
• Paintable aluminum grilles.
10
”
8
• Optional Retrofit Enclosure reduces sound spillover from rear of
speaker into adjacent spaces.
6”
Optional Accessories:
VirtuosoDR Retrofit Enclosure (part# 92243): Molded
enclosure that reduces sound transmission into
adjacent rooms and spaces. Can be used in both
new construction and retrofit installations.
VirtuosoDR FlexBracket (part# 92247): Plastic template
to reserve a mounting hole for the speaker in new
construction. Note: Not for use with Architectural
Finish Installation Kits.
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
VirtuosoDR Fire-Rated Back Can (part# 91908): Meets
ASTM E 119 and UL2043 criteria for commercial
installations.
VirtuosoDR Coverplate (part# 92245): Covers the hole
made by the FlexBracket during construction until
the speaker is installed.
Technical Support: (800) 582-0772
w w w . s o n a n c e . c o m
®2006 Dana Innovations. Sonance, Virtuoso, Sonic Eye, RotoLock and FastMount are trademarks or registered trademarks of Dana Innovations. All Rights Reserved.
All features and specifications are subject to change without notice. For the latest Sonance product information go to www.sonance.com
04/06
|