FLAT PANEL REFLECTIVE HEATER
FLAT PANEL
REFLECTIVE HEATER
Product Information
Reflective heating technology warms like the sun, directly warming the person or object in
front of it. As surface temperatures rise above the air temperature, they in turn warm the air.
Reflective heaters are great for open or large rooms, and actually save you energy by warming
objects and not the entire room.
USER MANUAL
Model # MS-11
Reflective heating is both safe and healthy– it produces no odors, chemicals, or fumes, and
doesn’t stir up dust. The surface of our heater is created from high-temperature resistant
plastic and steel plate, which never becomes hot enough to burn anyone or anything that
comes in contact with it. Our heater also produces beneficial bio-energy heat, which is
commonly prescribed by doctors for cell regeneration and promoting circulation. Equipped
with safety tip-over switch and overheat auto-off, our heater is safe and reliable.
Special Features
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
Heats instantly
Safety tip-over switch
Overheat auto-off
Two heat settings
Motorized oscillation
Silent operation
Energy efficient
Non-flammable surface
Produces bio-energy heat
Slim, space-saving design
Excellent for spot heating
Doesn’t burn oxygen
Specifications
Voltage Rating
115 V, 60Hz
Power Consumption
800W on High, 400W on Low
PLEASE SAVE THESE INSTRUCTIONS
WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.
Unit Size
14“(W)x 10”(D)x 24“(H)
6 lbs
Unit Weight
Operating Instructions
Product Diagram (Figure 1)
1) Place the heater on a firm, level surface and plug into a grounded 115V 60Hz power
outlet.
2) Press the buttons located on top for the desired setting: (refer to Figure 2)
LOW: Only one of the reflective tubes will operate, heating up to 400W.
HIGH: Both reflective tubes operate, heating up to 800W.
SWING: The unit will oscillate 60.° This feature can be used on both low and high
settings.
1) Built-in Carrying Handle (in back)
2) Power Buttons
3) Protective Front Grille
4) Base
5) Tip-over Safety Switch (on bottom)
6) Reflection Tubes
OFF: Heater will stop operating.
3) Unplug the heater when not in use.
Important Safeguards
5) Do not install the unit directly under a power outlet.
6) Do not share the power outlet with other appliances.
7) Do not use an adapter or extension cord.
8) Unplug the unit when not in use for a prolonged period.
Maintenance
Assembly
1) Unplug the unit and let it cool.
1) Remove the heater body and base from box, remove the packaging materials.
2) Lay the heater body on a level surface, then unscrew the 2 butterfly screws from the
bottom of the heater.
2) To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. CAUTION: Do not let liquid enter the heater.
3) Do not immerse the heater in water.
3) Pull the power cord through the hole at the center of the base, and align the base with
the bottom of the heater. The power cord should fit through the slot in the base.
4) Attach the base to the heater body with the butterfly screws.
4) Wait until the unit is completely dry before use.
Storage
Store the heater in a cool, dry location when not in use. Preferably, to prevent dust and dirt
build-up, use the old packaging to repack the unit.
Figure 2
As some states do not allow the limitation or exclusion of incidental or consequential
damages, or do not allow limitation on implied warranties, the above limitations and
exclusions may not apply to you. This warranty gives you specific legal rights, and you may
also have other rights that vary from state to state.
Troubleshooting
HEATER WILL NOT WORK
1) Check if the power cord is plugged into an electrical outlet, if not, plug in.
2) Check if electricity to the main fuse is working.
3) Confirm that the LOW or HIGH button is pressed down.
4) Check if the heater is on a level surface. If the tip-over safety switch is not pushed in,
the heater will not run.
For Warranty, Technical Support, Customer Service, Missing or Defective Parts
Please Call (888) 876-5387
Or Write To:
Soleus International Inc.
9451 Telstar Ave.
WARRANTY
El Monte, CA 91731 USA
One Year Limited Warranty
Soleus International Inc. warrants the accompanying Soleus Air MS-11 to be free of defects in
material and workmanship for the applications specified in its operation instruction for a
period of ONE (1) year from the date of original retail purchase in the United States or
Canada.
If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either
repair or replace it, free of charge within a reasonable time after the unit is returned during the
warranty period.
As a condition to any warranty service obligation, the consumer must present this Warranty
Certificate along with a copy of the original purchase invoice.
THIS WARRANTY DOES NOT COVER:
1) Damage, accidental or otherwise, to the unit while in the possession of a consumer not
caused by a defect in material or workmanship.
2) Damage caused by consumer misuse, tampering, or failure to follow the care and special
handling provisions in the instructions.
3) Damage to the finish of the case, or other appearance parts caused by wear.
4) Damage caused by repairs or alterations of the unit by anyone other than those authorized
by Soleus International Inc.
5) Freight and Insurance cost for the warranty service.
ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT
ABILITY ARE LIMITED TO ONE-YEAR DURATION OF THIS EXPRESS LIMITED
WARRANTY. SOLEUS INTERNATIONAL INC. DISCLAIMS ANY LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL
SOLEUS INTERNATIONAL INC’S LIABILITY EXCEED THE RETAIL VALUE OF THE
UNIT FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT
TO THIS UNIT.
|