Snell Acoustics Speaker IW D7 User Manual

Premier Series  
IW-D7  
HIGH PERFORMANCE IN-WALL LOUDSPEAKER BASED ON THE D7 TOWER  
The IW-D7 is a high performance, in-wall LCR, based on our highly regarded D7 tower.  
The same components are mounted in a fully enclosed, easy to mount aluminum  
enclosure, giving you near freestanding tower performance from an in-wall solution.  
IW-D7 is a 6.5-inch, D’AppolitoArray, designed by Snell chief engineer, Joe D’Appolito.  
In 1990, Snell developed the first “back-boxed” in-walls designed to mount flush in  
typical 2” x 4” walls. The evolution of this technique corrects for the problems associated  
with all in-wall installations. The fully enclosed cabinet defines bass performance and  
reduces sound transfer to adjacent rooms, while the non-plastic, three part baffle quiets  
cabinet resonance, which in turn reduces vibration to the wall materials. The twin 6.5-  
inch long throw woofers provide extended bass and plenty of output, and the 1-inch  
low-resonance, silk dome tweeter enables a large sweet spot for better stereo imaging.  
The IW-D7 is capable of tremendous impact, and realistic sound staging. It is the  
perfect speaker for any high performance music or video system. It is living proof that  
sound quality without compromise can be delivered unobtrusively .  
Application Alternatives:  
System Suggestions:  
Dimensions:  
Finish  
30 1/2High  
10 1/2” Wide  
3 3/4Deep  
Dimensions:  
Rough  
29 3/8High  
9 3/8Wide  
IW BASIS 300  
Subwoofer  
IW SR30 Surround  
IC D7 In Cabinet  
D7 In Room  
Like all Snell loudspeakers, each IW-D7 is hand tuned for natural imaging and sonic depth.  
Design:  
Tweeter  
Connections  
Grille  
Infinite Baffle, Back-Boxed,  
“D’Appolito” In-Wall LCR  
1-inch SEAS silk dome  
Spring loaded gold-plated  
terminals, accepts pins,  
banana plugs and bare wire to  
12 gauge.  
Perforated steel with white  
powder coat paint.  
Woofer  
Two 6.5-inch copolymer cone,  
6mm Excursion  
Frequency Response  
62Hz-20kHz ± 3dB  
Finishes  
Paintable white finish.  
Can be ordered in most paint  
finishes.  
Cabinet Construction  
Enclosure – Solid aluminum  
cabinet with full bracing and  
asphalt damping. Baffle –  
QuietBoxTechnology™ Hi-loss  
damping adhesive  
sandwiching two layers of 1/4-  
inch MDF. Mounting system –  
Eight "dog-leg" clamps for  
mounting surfaces 1/2 to 1 1/2-  
inch thick.  
Sensitivity  
[1 Watt (2.83v) @ 1m] 90 dB  
Crossover Frequency  
2.0 kHz  
Weight  
19 lbs.  
Impedance  
Nominal 4 Ohms  
Crossover  
Discrete tweeter, and woofer  
circuits. Time alignment and  
coherency are achieved  
through the transition region  
from driver to driver. Each  
crossover is individually tuned  
by our technicians to ± 0.5db of  
the Master Reference.  
Maximum Output  
110 dB  
Recommended Power  
50 Watts Minimum  
300 Watts Maximum  
 

Sharp Convection Oven R1874T User Manual
Sharper Image Refrigerator KP W001 User Manual
Sharp Personal Computer MX 2010U User Manual
Silvercrest Waffle Iron SBW 1000 A1 User Manual
Sony Carrying Case SPK SA User Manual
SPX Cooling Technologies Refrigerator MHF702 User Manual
Summit Speaker floorstanding loudspeaker User Manual
Sunpentown Intl Fan SF 609 User Manual
SUPER MICRO Computer Server 6016GT TF User Manual
Talk electronic Radio VOIP RF 900 User Manual