Snell Acoustics Speaker IC D7 User Manual

IC-D7  
Premier Series  
FOR BUILT-IN CABINETS, A UTILITY VERSION OF  
THE ACCLAIMED D7 TOWER  
The unique cabinet design, placement switch and wide  
dispersion tweeter of the IC D7 bring the performance of  
a freestanding high-end tower to an in-cabinet bookshelf  
enclosure. Conventional bookshelf loudspeakers sound  
“chesty” and image poorly when used in in-cabinet  
applications. The IC D7 is a 6.5-inch, D’Appolito Array,  
designed by Snell chief engineer, Joe D’Appolito, to fit  
into furniture and millwork, and, is tuned to compensate  
for the sonic problems that these cabinet boundaries  
Dimensions:  
• 19.5Wide • 7.75High • 11Deep  
cause. The twin 6.5-inch long throw woofers provide extended bass and plenty of output, while the 1-inch low-  
resonance, silk dome tweeter enables a large sweet spot for better stereo imaging. The IC D7 uses the same  
components as the Snell D7 Tower and IW D7 in-wall monitor, mounted in a robust, texture-painted enclosure. This  
high output LCR can be used for Left, Center and Right or mixed and matched with these two siblings to provide clean,  
impactful sound with an effortless and “airy” soundstage… perfect for music and movies.  
Application Alternatives:  
System Suggestions:  
D7 In Room  
IC Basis 300 Sub  
IW-D7 In Wall  
SR7 Surround  
Like all Snell loudspeakers, each IC-D7 is hand tuned for natural imaging and sonic depth.  
Design:  
Acoustic Suspension  
D’Appolito array  
Tweeter  
1-inch SEAS silk dome  
Boundary compensation  
"Normal" – When placed on  
stands away from wall.  
"Boundary"– When placed on  
shelf or near wall.  
Grille  
Black cloth over MDF frame.  
Woofer  
Two 6.5-inch Copolymer cone,  
6mm Excursion  
Finishes  
Frequency Response  
62Hz-20kHz ± 3dB  
Textured black paint. Can  
be ordered in most wood  
and paint finishes.  
Wiring  
Bi-amp, bi-wire ready  
Sensitivity  
Crossover Frequency  
[1Watt (2.83v) @ tm]  
90 dB  
2.2 kHz  
Weight  
30 lbs.  
Connections  
5-way satin, nickel-plated, brass  
terminals, accepts 5/16 - inch  
spades, pins, banana plugs and  
bare wire to 12 gauge.  
Crossover  
Impedance  
Nominal 4 Ohms  
Discrete tweeter, and woofer  
circuit boards. Time alignment  
and coherency are achieved  
through the transition region from  
driver to driver. Each crossover is  
individually tuned by our  
technicians to ± 0.5db of the  
Master Reference.  
Maximum Output  
110 dB  
Cabinet Construction  
Hardwood veneer over 3/4-inch  
MD Panels. 3/4 -inch textured  
painted.  
Recommended Power  
50 Watts minimum  
250 Watts maximum  
 

Sony Camera Accessories CLM V55 User Manual
Sony Digital Camera 4 162 397 111 User Manual
Sony Digital Camera DFW X710 User Manual
Sony DVD VCR Combo 3 213 480 121 User Manual
Sony Stereo System CDPCE500 User Manual
Stamina Products Bicycle 15 0110BGG User Manual
Star Micronics Printer NX 2450 User Manual
StarTechcom Network Cables USBDUP15 User Manual
State Industries Water Heater SBN71120NE User Manual
Tanaka Portable Generator QEG 250 300 User Manual