Model R90 Cartridge for Model 562
MODEL R90 REPLACEMENT CARTRIDGE FOR MODEL 562 MICROPHONE
GRILLE CAP
RUBBER
WASHERS
HEX
SET SCREW
FRONT
SCREEN
SIDE
PAD
TAPE
STRAIN
RELIEF
CARTRIDGE
SIDE SCREEN
FRONT PAD
CASE
FIGURE 1
EXPLODED VIEW
To replace the cartridge, proceed as follows:
1. Insert a No. 4 (.050 in.) hex wrench
into set screws in case (see Figure 1),
and turn clockwise (inward) just
enough to loosen the grille-cap. Be
careful not to turn the screws all the
way into the case.
5. Carefully unsolder the three leads at-
tached to the old cartridge.
6. Carefully solder the three leads to the
new cartridge (see Figure 2).
7. Place tape over the black and white
lead solder connections of the new
cartridge.
8. Wrap the side pad and side screen
around new cartridge.
2. Remove the grille-cap, front screen,
front pad, and the two rubber washers.
9. Insert new cartridge in case; twisting
cartridge slightly to avoid pinching
leads between cartridge and case.
10. Replace the rubber washers, front pad
and front screen, and slip grille into
place. Align holes in the grille with set-
screws in the case.
11. Insert hex wrench in set screws and
turn counterclockwise (outward) to
lock grille, being careful not to turn the
screws all the way out of the case.
3. Carefully withdraw the cartridge from
the case, and remove the side screen,
and the side pad, exposing soldered
and taped connections.
4. Remove tape from soldered connec-
tions on the bottom (not the side) of the
old cartridge and retain for use on the
new cartridge. If tape is missing or
damaged, any suitable electrical tape
may be used for step 7.
BLUE
+
WHITE
BLACK
FIGURE 2
INTERNAL CONNECTIONS
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
2005, Shure Incorporated
27D1158 (Rev. 6)
Printed in U.S.A.
|