iOS MID-SIDE STEREO
CONDENSER MICROPHONE
MV88
USER GUIDE
Le Guide de l’Utilisateur
Bedienungsanleitung
Guia del Usuario
Guida dell’Utente
Manual do Usuário
Руководство пользователя
Gebruikershandleiding
取扱説明書
사용자 안내서
用户指南
消費者指南
Panduan Pengguna
© 2015 Shure Incorporated
27A24500 (Rev. 1)
Printed in U.S.A.
iOS Mid-Side Stereo Condenser Microphone
MV88
The Shure MV88 is a professional quality condenser microphone which plugs directly into an Apple iOS device using a Lightning® connector. Two mi-
crophone capsules are arranged in a Mid-Side configuration to provide an adjustable stereo image, suitable for capturing a variety of sources, including
music and speech. The ShurePlus® MOTIV app allows users to customize the sound with digital signal processing (DSP) preset mode selection, gain
adjustment, and stereo width control.
Features
A Mid-Side Stereo Microphone
The classic mid-side stereo microphone technique uses two coincident capsules: one cardioid pointed directly at the source, and one bidirectional aimed
toward the sides. This configuration allows the user to adjust the stereo width and provides excellent mono compatibility.
Plug-and-Play Operation
The MV88 is compatible with any iOS device equipped with a Lightning connector. The free ShurePlus MOTIV app provides flexible controls to adapt the
sound to nearly any environment.
Compact and Durable
The MV88 features lightweight, all-metal construction and is small enough to carry anywhere. Like all Shure products, the MV88 has undergone rigorous
quality testing to ensure reliability in the field.
Flexible Control Through the ShurePlus MOTIV app
The ShurePlus MOTIV app controls microphone settings such as gain, stereo width, and preset modes and can function as a recording app.
Quick Setup
The MV88 is compatible with mobile devices that have a Lightning connector.
1. Plug the microphone into the Lightning connector on the iOS device.
The LED on the MV88 base illuminates when an audio application or the ShurePlus MOTIV recording app is open and selects the MV88.
Note: The reversible Lightning connector allows the MV88 to be installed in either orientation.
2. Install and open the ShurePlus MOTIV app.
ShurePlus MOTIV controls the microphone and provides instant recording.
3. Check audio and adjust settings with the ShurePlus MOTIV app within the MV88 settings.
Select a preset mode or manually adjust microphone gain and stereo width to optimize audio recordings. See the "Advanced Audio Settings" topic for
more information on the additional audio settings like compression, equalization, and more.
4. Set your device to Airplane Mode and Do Not Disturb before recording.
This allows you to record audio with no interruptions from phone calls or app notifications.
5. Use the integrated ShurePlus MOTIV or third party recording app to begin recording.
The microphone retains all settings from the ShurePlus MOTIV app. Adjustments can be made while recording, but to avoid audible artifacts, test set-
tings prior to recording.
3
The MV88 Microphone Design
The MV88 features two capsules: one capsule has a cardioid pattern, which picks up sound directly in front of the microphone. The other is bidirectional,
and captures sound from the left and right sides.
Center (Cardioid)
Left
Right
Microphone Cartridge
Adjusting the Microphone
For accurate stereo recordings in any position, the front of the microphone must be pointed towards the sound source, with the sides facing the appropri-
ate orientation. Use the Land Rindicators on the microphone barrel to ensure correct placement.
Note: The Left-Right Channel Swap feature allows you to switch orientation on the microphone if the swap is necessary.
Adjusting Microphone Position
The microphone pivots and the barrel can be rotated 90 degrees to achieve desired positioning.
4
Aiming the Microphone
This section suggests microphone placement for typical use cases. Keep
in mind that there are many effective ways to record a given source.
Experiment with microphone placement and settings to find what works
best.
Audio Interview (Tabletop)
Set the recording device on a flat surface with one side of the microphone
pointed towards the subject and the other pointed towards the interviewer.
Select the MONOBIDIRECTIONALpreset in the ShurePlus MOTIV app.
Tip: To ensure correct stereo orientation of the microphone at a glance,
check to see if the Shure name is clearly visible on the top of the micro-
phone. If the name is not visible, turn the barrel 90°.
Audio Recording
The phone or tablet can be used in any position. Aim the front of the
microphone towards the source, with the left and right sides facing the
appropriate direction.
Video Interview
To capture the voices of both the subject (on-camera) and the interviewer
(off-camera), select the MONOBIDIRECTIONALpreset in the ShurePlus
MOTIV app. Position the microphone with the left and right sides facing
each person.
Portrait (Vertical)
Aim the front of the microphone towards the source. The microphone can
be mounted in either orientation of the MV88 with the Lightning connector,
so ensure that the left and right sides are facing the appropriate direction.
Self-Recording (Voice)
Set the device on a flat surface and angle the microphone towards your
mouth. Select the MONOCARDIOIDpreset in the ShurePlus MOTIV app to
reduce ambient noise.
Landscape (Horizontal)
Aim the front of the microphone towards the source. The microphone
can be connected in either orientation with the Lightning connector, so
ensure that the left and right sides of the MV88 are facing the appropriate
direction.
5
Using with Headphones
Headphone Monitor Adapting Cable
Use the included headphone monitor adapting cable for the following reasons:
• You require a slimmer connection to the headphone input on your recording device. The cable accommodates headphones with larger connectors.
• You want to disable the inline microphone on your earphones. The cable ensures that the recorded sound comes solely from the MV88 and not the
inline microphone of your earphones.
The ShurePlus MOTIV App
The ShurePlus MOTIV app controls microphone settings to optimize performance for specific uses.
Tip: Set the device to Airplane Mode and Do Not Disturb to prevent interruptions to the recording caused by phone calls, text messages, or alerts.
Adjusting the Microphone
9:41 AM
100%
Help
MV88 Settings
EQ
L
R
Shure MV88
L
R
-48
-18
-12
-3
0 dB
Mic Gain
5.5 dB
Stereo Width
45°
L
R
Microphone Settings
① Menu
Select the menu to access the record window, saved recordings,
MV88 settings, and preferences windows.
⑤ Microphone Gain
Adjust to match the volume of the sound source. Monitor the meter
when making adjustments to ensure levels are in the target range
(indicated by the shaded region of the input meter).
② Input Meter
⑥ Stereo Width
Displays the strength of the input signal. The loudest peaks should
reach within the target range (indicated by the shaded region).
Adjusts the width of the stereo microphone pickup area.
Tip: Consider the location of the microphone and the size of the sound source
when adjusting the width. For example, a large orchestra or ensemble recording
will benefit from a wide stereo image to achieve increased separation between
instruments. Other applications, such as speech, benefit from a narrow width for
improved clarity and rejection of ambient (room) sound.
③ Advanced Features
Use the pull-down bar to reveal the advanced audio features including
cartridge selection, wind reduction, left-right swap, and equalizer,
limiter, and compressor controls.
④ Preset Modes
Select your mode to set stereo width, equalization, and compression
for specific applications. Refer to the "Preset Modes" topic for more
details.
6
Preset Modes
Five selectable modes optimize settings for gain, stereo width, equalization, and compression to match your recording needs. Set the microphone level
and scroll through the modes to find which sounds best. Then adjust level if needed.
Mode
Application
Characteristics
Ideal for capturing speech A narrow stereo width to reject background noise, an equalization setting to emphasize clarity
and fullness, and gentle compression to keep levels consistent.
Speech
Use to capture solo or
Medium stereo width with subtle equalization to add richness and clarity for a natural sound.
group vocal performances
Singing
Flat
Suited for any application A completely unprocessed signal (no equalization or compression settings used). Adds flexibility
when processing the audio after recording.
Suited for acoustic instru- A medium stereo width and transparent compression to smooth out volume spikes and bring out
ments and quiet music
applications
quiet passages. The equalizer setting emphasizes detail and an overall natural sound.
Acoustic
Band
Use to record bands and
louder sources
A wide stereo width to increase separation between sources with equalization to further improve
definition by reducing frequencies that can make the instrumentation sound crowded.
Record Settings
9:41 AM
100%
9:41 AM
100%
Record
Record
L
R
L
R
Shure MV88
Shure MV88
L
L
R
R
-48
-18
-12
-3
0 dB
-48
-18
-12
-3
0 dB
Mic Gain
5.5 dB
Mic Gain
5.5 dB
24/48 KHz
24/48 KHz
L
L
R
R
00:00
00:01
00:02
00:03
00:04
00:05
00:00
00:01
00:02
00:03
00:04
00:05
Time Left
Time Left
New Recording 1
0.00 MB
New Recording 1
0.92 MB
about 2 hours 5 min
about 25 min
00:00
00:01.43
Done
Recordings
Record Settings
① Device Status
⑤ Record Details
Displays the microphone name to indicate that the ShurePlus MOTIV
app recognizes the connected microphone.
The left side displays properties of the recorded file, like file name and
file size. The right side displays the remaining record time.
② Advanced Features Display
⑥ Record/Pause Button
Displays the icons for the advanced features currently engaged.
A large button to engage record and pause.
Note: The maximum file size for a recording is 2GB which will result in
approximately 2 hours of record time. This limitation was put in place to
maximize app performance. Recording at a lower sample rate will allow for
longer, uninterrupted recording time.
③ Record Display
Displays the waveform of the sound while recording.
④ Sample Rate and Bit Depth Selection
Pull-down and select a sampling rate and bit depth.
7
Advanced Audio Settings
To reveal the advanced audio settings menu, use the pull-down bar located below the input meter on the ShurePlus MOTIV iPhone app. Use the
Advanced button to reveal the advanced audio settings when using the iPad version.
Polar Pattern Selection (Stereo and Mono Settings)
The following settings control microphone capsule activity. When operating in a mono mode, stereo width is not adjustable.
Stereo
Front = On
Sides = On
Mono Cardioid
Front = On
Sides = Off
Mono Bidirectional
Front = Off
Sides = On
Raw Mid-Side
See full description for information on
output and processing.
Raw Mid-Side Output
For increased post-processing flexibility, use the RawMid-Sidesetting. This delivers a 2-channel signal with a stereo image that can be adjusted even
after the tracks have been recorded:
Left: Cardioid (front)
Right: Bidirectional (sides)
The RawMid-Sidesetting is intended only for use with audio recording applications that have a mid-side stereo matrix decoder to interpret the recorded
tracks as a stereo image.
8
Manual Decoding and Stereo Width Adjustment
If your digital audio workstation software (DAW) has no mid-side decoder, use these steps to create an accurate stereo image:
1. Extract the left and right audio signals from the 2-channel RawMid-Sidefile as individual mono tracks.
2. Create 3 blank audio tracks:
First track Use the audio signal (front/cardioid) from the left channel only as a mono track,
panned to the center.
Second track Use the audio signal (side/bidirectional) from the right channel only as a mono
track, panned all the way to the left.
Third track Copy the side/bidirectional signal from the second track. Pan this track all the way
to the right and reverse the phase.
3. Group the side tracks together at the same volume level so they can be adjusted simultaneously. Increasing the vol-
ume of the side tracks increases the stereo width, while decreasing their volume narrows the width.
Advanced tip: Using compression with a fast attack setting on the side tracks keeps transients (the first part of a sound, such as when a drum stick
strikes a cymbal) toward the center of the stereo image and allows them to expand within the stereo field as the sound decays.
Manual Decoding of Raw Mid-Side Audio
Wind Noise Reduction
This engages a low-frequency cutoff filter that reduces rumble caused by environmental noise. Use
the included foam windscreen in combination with wind reduction to counteract rumble and plosives
(bursts of air hitting the microphone).
To further reduce wind noise, use the optional Rycote™ Windjammer, which fits over the included
foam windscreen.
Standard
Left-Right Channel Swap
When recording in stereo, this feature flips the left and right audio channels to correctly match the
stereo image to the video. This may be necessary for certain phone/tablet positions where the micro-
phone is reversed.
Tip: look at the Land Rindicators on the microphone barrel to determine if the swap is necessary.
Swap enabled
In this example, left/right swap should be
enabled when the phone is rotated:
Equalizer, Limiter, and Compressor
The advanced features window allows you to fine tune your equalizer, limiter, and compressor settings. Scroll through the preset modes to hear the DSP
changes, and adjust to dial in your sound.
Note: Equalization within presets will not be displayed. Only additional user-selectable equalization is displayed in the advanced features settings
window.
9
Troubleshooting
Issue
Solution
LED light is not visible
The LED is located at the base of the MV88. Because the Lightning connector allows you to
insert the microphone in either orientation it is possible that the phone is obscuring the LED.
Remove the microphone, flip and re-insert to check microphone status.
Audio sounds bad
Check in the top left corner of the application that the MV88 is fully plugged in and recognized.
The audio may be from the built-in microphone.
Audio quality changes when Headsets with microphones override the MV88 as the audio device. Use the included headphone
a headset is plugged in
monitor adapting cable to disable interference from other microphones.
Audio is distorted
Use the audio meter to ensure that volume peaks are within the target range. If level is reaching
the red peak indicator of the input meter, turn the gain down.
Left/right stereo channels do Depending on the orientation of the iOS device, it may be necessary to engage the Left-Right
not match video
swap. If the audio has already been recorded, switching the left and right channels can be easily
done in most DAW and audio editing software.
There are beeps and un-
wanted sounds on the
recording
Enable Airplane Mode and Do Not Disturb in your device settings to prevent interference from
other apps.
MV88 is plugged in, but the
Edit the privacy setting for the iOS device under SETTINGS> PRIVACY> MICROPHONEto give the
volume meter does not regis- ShurePlus MOTIV app permission to use the microphone.
ter a signal.
Sampling Rate and Bit Depth
Specifications
Sample Rate and Bit Depth settings are found in a drop down menu in
the audio or sound control panel of your computer. You can adjust these
variables to fit your needs. Select a lower sample rate for podcast record-
ing, when it is important to have a smaller file for easy download. Select a
higher sample rate for music and more dynamic recordings.
MFi Certified
Yes
DSP Modes (Presets)
Speech/Singing/Acoustic/Loud/Flat
Transducer Type
Tip: Record at a higher sample rate and bounce down to an M4A for a file
with the highest sound quality at a manageable size.
Cardioid (10 mm)/Bidirectional Condenser Cartridge (10 mm)
Polar Pattern
Adjustable Width Stereo/Mono Bidirectional/Mono Cardioid/Mid-Side
Tip for PC users: Make sure that the sample rate and bit depth micro-
phone settings, found in the sound control panel of the computer, match
with the sample rate and bit depth selected in your software.
Stereo Principle
Mid-Side
Bit Depth
16-bit/24-bit
Sampling Rate
44.1/48 kHz
Frequency Response
20 Hz to 20,000 Hz
Adjustable Gain Range
System Requirements and Compatibility
0 to +36 dB
Sensitivity
iOS
• iOS 8.0 and higher
-37 dBFS/Pa at 1 kHz [1] [2]
iPhone
• iPhone 5
Maximum SPL
• iPhone 5c
• iPhone 5s
• iPhone 6
120 dB SPL [2]
Limiter
Yes
• iPhone 6 Plus
Compressor
iPod Touch
iPad
• 5th gen
Yes
• iPad 4th gen
• iPad Air
• iPad Air 2
Equalizer
5-band
Power Requirements
iPad Mini
• iPad Mini 1st gen
• iPad Mini 2nd gen
• iPad Mini 3rd gen
Powered through Lightning connector
Housing
all metal construction
Net Weight
40.5 g (1.43oz.)
Dimensions
67 x 25 x 35 mm H x W x D
[1] 1 Pa=94 dB SPL
[2]At Minimum Gain, Flat Mode
10
Accessories
Furnished Accessories
Replacement Parts
MV88 Foam Windscreen AMV88-WS
MV88 Foam Windscreen AMV88-WS
MV88 Carrying Case AMV88-CC
MV88 Carrying Case AMV88-CC
Headphone Monitor Adapting Cable 95A13511
Optional Accessories
Rycote Windjammer for MV88 AMV88-FUR
Certifications
Information to the user
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC
performance.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: [email protected]
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air and
iPad mini are trademarks of Apple Inc. The trademark "iPhone" is used with a license from Aiphone K.K.
Mac® and Lightning® are registered trademarks of Apple Inc.
11
Europe, Middle East, Africa:
PT. GOSHEN SWARA INDONESIA
Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat
I.16.GSI31.00501.0211
|