TM
PG ALTA SERIES
WIRED MICROPHONE
PGA 48
USER GUIDE
© 2015 Shure Incorporated
27A25227 (Rev. 3)
Printed in China
Specifications
Optional Accessories and
Replacement Parts
Type
Dynamic (moving coil)
Microphone Clip for SM58, SM57, SM87A, A25D
Beta 87A, Beta 87C, PGA57, PGA58,
PGA48, PGA81 Microphone Clip for
Frequency Response
70 to 15,000 Hz
SM58, SM57, SM87A, Beta 87A, Beta
87C, PGA57, PGA58, PGA48, PGA81
Polar Pattern
Cardioid
5/8" to 3/8" Thread Adapter
31A1856
Output Impedance
600 Ω
7.6 m (25 ft.) Cable (XLR-XLR)
C25J
C25F
Sensitivity
at 1 kHz, open circuit voltage
25 foot (7.5m) Triple-Flex® Microphone
XLR Cable with chrome connectors
-53.5 dBV/Pa¹ (2.10 mV)
PGA48 Replacement Grille
RPMP48G
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2
with respect to pin 3
Weight
Certifications
300 g (10.58 oz.)
Switch
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
On/Off Switch
Connector
The CE Declaration of Conformity can be obtained from:
Three-pin professional audio (XLR), male
Environmental Conditions
Authorized European representative:
Shure Europe GmbH
Operating Temperature -20° to 165°F (-29° to 74°C)
Relative Humidity 0 to 95%
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
1 Pa=94 dB SPL
60 cm (2 ft.)
Fax: 49-7262-92 49 11 4
Email: [email protected]
Typical Frequency Response
166 mm (6.54 in.)
1000 Hz
Typical Polar Pattern
55.1 mm diameter
(2.17 in.)
Overall Dimensions
3
|