SIIG TV Mount CEMT0A12S1 User Manual

LCD TV/Monitor Tilting Mount - 10" to 26"  
Installation Instructions  
Hardware  
A
B
C
D
E
F
G
(x2) M6X60 (x2) M6 concrete (x4) M6 small (x2) M6 large  
(x4) M4X12  
screw  
(x4) M5X12  
screw  
(x4) M6X12  
screw  
bolt  
anchor  
washer  
washer  
4mm Allen Key  
6mm Allen Key  
Tools Required: Electronic stud finder, #2 Phillips head screw driver, drill, 1/8" drill bit (wood  
stud installation), 3/8" masonry drill bit (concrete/brick wall installation).  
04-0553C  
Page 1  
 
Step 2: Display Plate Installation  
1
Place your TV screen down on a soft, flat surface, and locate the threaded mounting  
points that are located on the back of the display.  
2
According to the size of the display's hole, choose the corresponding screw (E/F/G)  
and washer (C) and insert into the hole as shown (Figure 3) and tighten.  
Figure 3  
Step 3: Final Installation  
Hang the display plate onto the top of the  
wall plate and slip it into the wall plate as  
shown (Figure 4).  
1
2
Tighten the safety screw on the side and  
back using a Phillips head screw driver  
and the supplied 4mm Allen Key (Figure 5  
& Figure 6 respectively).  
3
Adjust the tension of the joint using the  
supplied 6mm Allen Key (Figure 7).  
Figure 4  
Phillips  
screw driver  
Figure 5  
Figure 6  
Figure 7  
Page 3  
 
Maintenance  
Check the mounting screws every two months for tightness.  
Important: If you don't understand the installation instructions, please consult an  
installation specialist.  
Page 4  
 
Blank Page  
Page 5  
 
Blank Page  
Page 6  
 
Technical Support and Warranty  
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com  
and click Support. Our online support database is updated daily with new drivers and solutions.  
Answers to your questions could be just a few clicks away. You can also submit questions  
online and a technical support analysts will promptly respond.  
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the original  
purchaser and guarantees the product to be free of any defects in materials or workmanship for  
five (5) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product having similar  
features and functionality) the product if defective in materials or workmanship. This warranty  
gives you specific legal rights, and you may also have other rights which vary from state to state.  
Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store where you  
purchased from.  
B) If your purchase has passed the store's return policy period, please follow these steps to  
have the product repaired or replaced.  
Step 1: Submit your RMA request.  
request to 510-657-5962. If the product is determined to be defective, an RMA number will be  
issued.  
Step 2: After obtaining an RMA number, ship the product.  
• Properly pack the product for shipping. All software, cable(s) and any other accessories that  
came with the original package must be included.  
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept  
any shipping package, and will not be responsible for a product returned without an RMA  
number posted on the outside of the shipping carton.  
• You are responsible for the cost of shipping. Ship the product to the following address:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #: ________________  
• SIIG will ship the repaired or replaced product via Ground in the U.S. and International  
Economy outside of the U.S. at no cost to the customer.  
Page 7  
 
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity  
products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers,  
FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-  
stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly  
features, and are backed by an extensive manufacturer warranty. High-quality control standards  
are evident by the overall ease of installation and compatibility of our products, as well as one of  
the lowest defective return rates in the industry. SIIG products can be found in computer retail  
stores, mail order catalogs, through major distributors, system integrators, and VARs in the  
Americas and the UK, and through e-commerce sites.  
Product Name  
LCD TV/Monitor Tilting Mount - 10" to 26"  
LCD TV/Monitor Tilting Mount - 10" to 26" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of  
SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.  
September, 2010  
Copyright © 2010 by SIIG, Inc. All rights reserved.  
Page 8  
 

Sennheiser Satellite Radio SK 5012 User Manual
Soleus Air Fan FB1 30 20 User Manual
Sony Camcorder XCG 5005E User Manual
Sony Camera Flash 4 105 930 121 User Manual
Sony Computer Monitor DDM 2801CU User Manual
Sony CRT Television VPL EX130 User Manual
Sony MiniDisc Player MDS 302 User Manual
Sony Video Games SOCOM 3 User Manual
SPX Cooling Technologies Indoor Furnishings 16350 User Manual
Sunbeam Blender PB7600 User Manual