Scientific Atlanta DVR E8000SD User Guide

United States FCC Compliance  
Software and Firmware Use  
This equipment has been tested and found to comply with the applicable  
limits of Part 15 of FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installa-  
tion. This equipment generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio or TV reception, which can be determined by  
turning the equipment off and on. The user is encouraged to try to correct  
the interference by one or more of the following measures:  
Scientific-Atlanta, Inc. owns copyrights to the software described in this  
document and furnishes the software to you under a license agreement.  
You may only use or copy this software in accordance with the terms of  
your license agreement.  
Scientific-Atlanta, Inc. owns copyrights to the firmware in this  
equipment. You may only use the firmware in the equipment in which it  
is provided. Any reproduction or distribution of this firmware, or any  
portion of it, without the express written consent of Scientific-Atlanta,  
Inc. is prohibited.  
Explorer® 8000  
• Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected  
Canada EMI Regulation  
This Class B digital apparatus meets all requirements of the Canadian  
Interference Causing Equipment Regulations.  
Home Entertainment Server  
• Consult your cable company or an experienced radio/TV technician for  
help  
Cet appareil numérique de la classe B respecte toutes les exigences du  
Réglement sur le matériel brouilleur du Canada.  
User’s Installation Guide  
Any changes or modifications not expressly approved by Scientific-Atlanta  
could void the user’s authority to operate the equipment.  
Trademarks  
Important: The information shown in the FCC Declaration of Conformity  
paragraph below is a requirement of the FCC and is intended to supply you  
with information regarding the FCC approval of this device. The phone  
numbers listed are for FCC-related questions only and not intended for  
questions regarding the connection or operation for this device. Please  
contact your cable service provider for any questions you may have  
regarding the operation or installation of this device.  
Explorer, Scientific-Atlanta, and the Scientific-Atlanta arcs logo are  
registered trademarks of Scientific-Atlanta, Inc. VCR Commander and  
“Bringing the Interactive Experience Home” are trademarks of Scientific-  
Atlanta, Inc.  
+
CH  
Disclaimer  
+
VOL  
VOL  
POWER  
Scientific-Atlanta, Inc. assumes no responsibility for errors or omissions  
that may appear in this guide. Scientific-Atlanta reserves the right to  
change this guide at any time without notice.  
GUIDE  
INFO  
EXIT  
LIST  
CH  
RECORD  
FCC Declaration of Conformity  
This device complies with Part 15 of FCC Rules. Operation is subject  
to the following two conditions: 1) the device may not cause harmful  
interference, and 2) the device must accept any interference received,  
including interference that may cause undesired operation.  
United States: Scientific-Atlanta, Inc.,  
5030 Sugarloaf Parkway, Box 465447,  
Lawrenceville, GA 30042  
EXPLORER® Home Entertainment Server models:  
Models E8000SD  
Manufactured by: Scientific-Atlanta, Inc.;  
5030 Sugarloaf Parkway;  
© 2003 Scientific-Atlanta, Inc.  
Printed in USA  
All rights reserved.  
July 2003  
Lawrenceville, Georgia 30042, USA  
Telephone 770-236-1077  
Part Number 4002771 Rev B  
IMPORTANT RULES FOR SAFE OPERATION  
Placement  
Ventilation  
Cleaning the Equipment  
Lightning and Power  
Surges  
Grounding  
Damage that Requires  
Service  
For damage that requires  
service, unplug this  
equipment from the electrical  
outlet. Contact your cable  
service provider when any of  
the following conditions  
occur:  
Note to the Installer  
This equipment has openings for  
ventilation that protect it from  
overheating. To ensure the  
Place this equipment in a location  
that is close enough to an electrical  
outlet and where the power cord is  
easily accessible to be disconnected  
from the wall outlet or from the rear  
panel of the Entertainment Server.  
Place this equipment on a stable  
surface. The surface must support  
the size and weight of this  
This equipment has a two-prong  
plug. Properly ground (earth) this  
equipment by inserting the plug into  
a grounded electrical, two-socket  
outlet. If this plug is polarized, it  
has one wide prong and one narrow  
prong. This plug fits only one way.  
Before cleaning this equipment,  
unplug it from the electrical outlet.  
Use a damp cloth to clean this  
equipment. Do not use a liquid  
cleaner or an aerosol cleaner. Do  
not use a magnetic/static cleaning  
device (dust remover) to clean this  
equipment.  
Ground (earth) your cable system  
to provide some protection against  
voltage surges and built-up static  
charges. Plug your equipment into a  
surge protector in order to reduce  
the risk of damage from lightning  
strikes and power surges. If you  
have questions, call your cable  
service provider.  
Note to CATV System Installer  
(USA/Canada Only)  
This reminder is provided to call the CATV  
system installer’s attention to Article 820-40  
of the NEC (Section 54, Part I of the Canadian  
Electrical Code), that provides guidelines for  
proper grounding and, in particular,  
specifies that the CATV cable ground shall  
be connected to the grounding system of  
the building, as close to the point of cable  
entry as practical.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
reliability of this equipment, do not  
obstruct the openings.  
AVIS  
Do not place other equipment,  
lamps, books, or any other  
object on the top of this  
equipment.  
CAUTION: To reduce the risk of electric  
shock, do not remove cover (or back).  
No user-serviceable parts inside. Refer  
servicing to qualified service personnel.  
Object and Liquid Entry  
• There is damage to the  
power cord or plug  
equipment.  
CAUTION:  
Do not place this equipment in  
any of the following locations:  
Never push objects of any kind into  
this product through openings as  
they may touch dangerous voltage  
points or short out parts that could  
result in a fire or electric shock. Do  
not expose this equipment to liquid  
or moisture. Do not place this  
equipment on a wet surface. Do not  
spill liquids on or near this  
To prevent electric shock,  
match wide blade of plug to  
the wide slot, and then fully  
insert.  
WARNING  
Power Cord Protection  
TO PREVENT FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS UNIT TO RAIN OR  
MOISTURE.  
• Liquid enters the equipment  
-
-
-
On a bed, sofa, rug, or  
similar surface  
WARNING:  
Avoid personal injury and  
Arrange all power cords so that  
people cannot walk on the cords,  
place objects on the cords, or place  
objects against the cords, which can  
damage the cords. Give particular  
attention to the cords at the point at  
which the cord connects to the plug,  
at electrical outlets, and at the  
places where the cords exit the  
equipment.  
• A heavy object falls on the  
equipment  
damage to this equipment. An  
unstable surface may cause  
this equipment to fall.  
Over a radiator or a heat  
register  
• There is exposure to rain or  
water  
This symbol is intended to alert you that  
uninsulated voltage within this product may  
have sufficient magnitude to cause electric shock. presence of important operating and  
If you are unable to insert this plug  
fully into the outlet, contact an  
electrician to replace your obsolete  
outlet.  
This symbol is intended to alert you of the  
In an enclosure, such as a  
bookcase or equipment rack,  
unless the installation  
• Operation is not normal (the  
instructions in this guide  
describe the proper  
Therefore, it is dangerous to make any kind of  
contact with any inside part of this product.  
maintenance (servicing) instructions in the  
literature accompanying this product.  
equipment.  
provides proper ventilation  
operation)  
Accessories  
Do not use accessories with this  
equipment unless recommended by  
your cable service provider.  
Servicing  
• If you drop this equipment,  
or damage the cabinet of this  
equipment  
Do not open the cover of this  
equipment. If you open the cover,  
your warranty will be void. Refer all  
servicing to qualified personnel  
only. Contact your cable service  
provider for instructions.  
Power Sources  
Read and Retain These Instructions  
A label on this equipment indicates  
the correct power source for this  
equipment. Operate this equipment  
only from an electrical outlet that  
has the voltage and frequency that  
the label indicates.  
• Read all of the instructions  
before you operate this  
equipment. Give particular  
attention to all safety precau-  
tions. Retain the instructions for  
future reference.  
• Comply with all warning and  
caution statements in the  
instructions. Observe all warning  
and caution symbols that are  
affixed to this equipment.  
• If this equipment exhibits a  
distinct change in perfor-  
mance  
Overloading  
Do not overload electrical outlets,  
extension cords, or integral  
convenience receptacles, as this can  
result in a risk of fire or electric  
shock. For equipment that requires  
battery power or other sources to  
operate, refer to the operating  
instructions for that equipment.  
Upon completion of any service or  
repairs to this equipment, the  
service technician will perform  
safety checks to determine that the  
equipment is in proper operating  
condition.  
• Comply with all instructions  
that accompany this equipment.  
If you are unsure of the type of  
power supply to your residence,  
consult your cable service provider  
or your local power company.  
 

QSC Audio Network Card DD1 3 User Guide
RAD Data comm TV Converter Box AMC 101 User Guide
ResMed Oxygen Equipment VPAP ST User Guide
Rockford Fosgate Stereo Amplifier R500 1 User Guide
Roland Musical Instrument E 09 User Guide
Rosewill Mouse RM 5000L User Guide
Sam4s Cash Register ER 380 User Guide
Sanyo Projector 1080HD User Guide
Sanyo Refrigerator SR A1780 User Guide
Schneider Electric Webcam TMSCE User Guide