Sceptre Technologies Computer Monitor X9WG NagaV User Guide

X9WG-NagaV  
X9WS-NagaV  
User’s Manual  
 
The Federal Communications Commission warns that changes or  
modifications of the unit not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the equipment.  
CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-  
3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11)  
Radio Frequency Interference Statement  
Warning:  
This is a Class B product. In a domestic environment, this product may  
cause radio interference in which case the user may be required to take  
adequate measures.  
Canadian Doc Notice  
For Class B Computing Devices  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulation of the Canadian Department of Communications.  
“Le présent appareil numérique n’èmet pas de bruits radioélectriques  
dépassant les limites applicables aux appareils numériques de la class B  
prescrites dans le Règlement sur le brouillage radioélectrique édicté par  
le ministère des Communications du Canada."  
ii  
 
TABLE OF CONTENTS  
TABLE OF CONTENTS ..........................................................................................III  
Your New LCD Monitor  
1
1
3
5
6
6
Unpacking  
Identifying Components  
Adjusting the Tilting Angle  
Connecting AC Power and Video Cable  
Power Management System  
How to install the detacheable stand  
The LCD Monitor's Control Panel  
Adjusting the Monitor’s Display  
TFT LCD Monitor Specifications  
Supported Timing  
7
8
9
14  
16  
17  
Troubleshooting  
iii  
 
The LCD Monitor  
Your New LCD Monitor  
Your LCD Monitor has been designed to be versatile, ergonomic and  
user-friendly. The LCD Monitor is capable of displaying most  
standards, from 640x400 VGA to 1440x900 WXGA+. The digital  
controls located on the front panel allow the user to easily adjust the  
Monitor’s display parameters, and the LCD Monitor’s small footprint  
gives you more room in your workspace for other peripherals.  
Lightweight and compact, the LCD Monitor is the perfect solution for  
users on the go. You can use the LCD Monitor for everything from  
making business presentations to playing computer games. The  
Monitor also has a VESA wall-mount function for added convenience.  
The architecture of the LCD Monitor incorporates an LCD panel that  
produces a clear display with low radiation emission. And with its low  
power consumption, the LCD Monitor helps you reduce your power bill.  
Unpacking  
Before unpacking your LCD Monitor, prepare a suitable workspace for  
your LCD Monitor and computer. Look for a stable, level and clean  
surface near a wall outlet. Even though the LCD Monitor uses very  
little power, you should put it in a location which allows sufficient  
airflow to ensure that the LCD Monitor and your computer do not  
overheat. Set up your LCD Monitor so that the panel is not facing a  
window where sunlight often comes in. The glare caused by sunlight  
reflecting off of the LCD Monitor’s screen will make it difficult to use  
the Monitor for viewing.  
1
Rev.1  
 
Note: Using a computer for an extended period of time with a poor workstation  
set-up and incorrect working habits can cause health problems. The science of  
ergonomics studies the relationship between health and a suitable working  
environment. There is a section on ergonomics at the end of this chapter. For  
more information on ergonomics, contact your nearest computer bookstore, or  
local library. The Internet also has information on this and other subjects.  
If you previously were using a CRT monitor instead of a LCD monitor,  
please do not connect the LCD monitor to your computer yet. Please  
use the CRT monitor and turn on your computer. Make sure your video  
card’s refresh rate is at 60hz in the Display Setting’s Advance Menu  
under the Display Adapter tab. Once that is achieved you can then turn  
off the computer and plug your new LCD monitor in  
After unpacking your LCD monitor, make sure the following items are included  
in the box and are in good condition:  
LCD monitor  
Power Cord  
Monitor-To-PC Analog signal cable 15pin  
Monitor-To-PC DVI signal cable  
1.5M stereo Jack Audio Cable  
User’s manual  
If you find that any item to be missing or appear to be damaged,  
contact your dealer immediately. Do not throw away the packing  
material or shipping carton in case you need to ship or store the LCD  
monitor in the future.  
2
Rev.1  
 
Identifying Components  
A. The LCD Monitor — Front View  
3
1
2
4
Figure 1-1: The LCD Monitor Front View  
1. Power-On Indicator  
This foursquare LED indicator blue lit when the power is on  
and red lit when the LCD monitor is in power-saving mode.  
2. Monitor Stand  
3. LCD Screen  
The LCD monitor screen is a 19-inch TFT 1440 x 900 Wide  
WXGA+ screen.  
4. LCD Monitor Control Panel  
Refer to Chapter 2 for more details.  
3
Rev.1  
 
B. "Hot Keys" for Quick Adjustment of Monitor Settings  
Figure 1-2: "Hot Keys"  
1. Brightness adjustment "hot key":  
Press - or + buttons to allow you to  
adjust the brightness function  
50  
2. Source select “ Hot Key :  
Source D-Sub  
Source DVI  
Press “ S “ button to allow you to  
change the input source between DVI  
port and RGB port, if the screen can’t  
detect signal, then it will switch to the  
next automatically  
If DVI port connects to a PC , display  
PC screen.  
3. Auto adjustment “ Hot Key “  
Press this  
to allow you to do the  
auto adjustment to get the optimized  
view  
( For VGA port only, DVI port can’t  
adjustment )  
4
Rev.1  
 
Adjusting the Tilting Angle  
The LCD Monitor’s angle settings range from 0° to 10°.  
0 to 10  
Figure 1-3: Tilting the Monitor  
5
Rev.1  
 
Connecting AC Power and Video Cable  
Note: Turn off your PC and the LCD monitor before connecting your LCD  
monitor to the computer.  
AC-IN  
Audio  
DVI  
VGA  
AC Outlet  
(Wall Socket)  
Computer Power Cord  
Figure 1-4: The AC Adapter  
Power Management System  
This LCD Monitor complies with the VESA DPMS power management  
proposal.  
When the LCD Monitor is in power-saving mode or detects an incorrect  
timing, the monitor screen will be blank and the power LED indicator from  
blue lit change to red lit and the power LED indicator starts blinking.  
6
Rev.1  
 
How to install the detacheable stand:  
Please see the below drawing.  
7
Rev.1  
 
The Display Controls  
The LCD Monitor’s Control Panel  
Figure 2-1: The Control Panel  
1. Cursor Movement button Y &Z  
These buttons let you move horizontally across your settings  
2. Ajustment button - & +  
These buttoms let you to change the setting value or move  
to next sub-menu  
3. Menu: OSD Menu button  
Press this button to display the OSD (On-Screen Display)  
menu.  
4. Source: Source select hot key  
Press this button to change the input source from D-Sub to  
DVI  
5.  
Power Switch  
This button lets you turn power for the LCD monitor ON or  
OFF.  
8
Rev.1  
 
Adjusting the Monitor’s Display  
OSD Main Menu  
1. Pressing the OSD Menu button causes the screen below to appear.  
2. Use the Y &Z key to select the desired group, then press - & + key  
to the sub-menu  
3. Repeat step 2 to select the changed item, then press - & + to change the  
value.  
4. Press the Menu to return to the sub-menu item 3 to another adjustment  
Timing :  
1440 x 900  
V/H Freq :  
SCEPTRE  
60Hz 55KHz  
X9WG-NagaV  
Recommend 1440 x 900  
The OSD Main Menu  
OSD Main SCREEN  
9
Rev.1  
 
Auto Adjust Option  
The Auto Adjust option lets the monitor determine and  
select the settings that are most appropriate for your  
system requirements.  
Note: it only apply for Analog RGB input  
Provides you with the current display timing information.  
Brightness and Contrast Adjustment  
Adjusts the Brightness value  
Adjusts the Contrast value  
Execute the white balance function  
Return to the previous Menu  
Audio Function  
Volume : Adjust the speaker volume  
Mute : Mute the speaker  
Return  
Color Temperature Adjustment  
10  
Rev.1  
 
Set up the color temperature value  
User Mode  
Sets the color temperature to 6500K  
Sets the color temperature to 9300K  
Red  
change Red gain for the color temperature  
(only valid when color temperature set at user mode )  
Green  
change Green gain for the color temperature  
(only valid when color temperature set at user mode )  
Blue  
change Blue gain for the color temperature  
(only valid when color temperature set at user mode )  
Return to the previous Menu  
Display Quality Adjustment  
Auto Adjust: use this option to apply automatically setting  
Changes the screen viewing size  
11  
Rev.1  
 
Adjusts phase tracking to reduce display flicker  
Moves the whole screen right or left  
Moves the whole screen up or down  
Return to the previous Menu  
OSD Adjustment  
Restores settings to factory default values  
Sets the OSD timer  
Moves the OSD menu horizontally  
Moves the OSD menu vertically  
Set the graphic mode or text mode  
Return to the previous Menu  
Exit the OSD screen  
12  
Rev.1  
 
Note:  
1) No video  
When the monitor is ON and there is no video  
signal received, the following message will be  
displayed  
2) Signal out of range  
When the frequency range of the signal is out of the Monitor’s specifications,  
(over 85HZ) the display will show the following message  
Out of Range  
13  
Rev.1  
 
Appendix A  
TFT LCD Monitor Specifications  
Item  
Specification  
19" WXGA+  
LCD Panel  
Control  
Functions  
Power  
Software Power switch with LED indicator  
(ON/OFF)  
On-Screen  
Display  
(OSD)  
Main Menu  
Submenu  
Information  
Brightness  
/Contrast Control  
Brightness/Contrast/White  
balance/Exit  
Audio Control  
Volume/Mute/Exit  
Color temperature User mode, 9300K, 6500K  
Control  
R,G,B, gain value  
Display Quality  
Auto Adjustment/Phase  
adjustment/Screen Size/ Screen  
Horizontal position/Screen Vertical  
position/Exit  
OSD adjsutment  
Exit  
Restore to the default/OSD timer/OSD  
Horizontal Position/OSD Vertical  
Position/640&720/Exit  
Display Area  
(mm)  
408.24 x 255.15  
(19" diagonal)  
Display  
Colors  
16.7 M  
Video  
Interface  
VGA Compatible Analog RGB  
Digital DVI interface  
14  
Rev.1  
 
Item  
Specificaiton  
Scanning Frequency  
H/V, Hz  
24-80K  
50-75  
Power Management  
Meets VESA DPMS  
40W/1W Max.  
Power Consumption  
(ON/OFF, W)  
Dimensions  
WxHxD  
18.72 x 16.14 x 6.89 in.  
(475.4 x 410 x 175mm)  
Net Weight  
(approx.)  
13.2 lbs  
(6 Kg)  
Power Supply  
Environment  
Universal Input AC Socket  
Operating Temperature: 32 to 104°F (0 to 40° C)  
Relative Humidity: 10% to 90%  
Regulatory  
FCC B DoC,UL/cUL,Energy star  
15  
Rev.1  
 
Appendix B  
Supported Timing  
Vertical  
Scanning  
Frequency  
(Hz)  
Horizontal  
Scanning  
Frequency  
(kHz)  
Item  
Standards  
Resolution  
Dot Clock  
(MHz)  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
NEC PC98  
MAC 13" mode  
MAC 16" mode  
MAC 17" mode  
VGA  
640x400  
640x480  
832x624  
1024x768  
640x350  
640x400  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
720x400  
1024x768  
1024x768  
1024x768  
1152X864  
1280x720  
1280X1024  
1280X1024  
1440x900  
21.05  
30.24  
57.28  
80.00  
25.18  
25.18  
25.18  
31.50  
31.50  
36.00  
40.00  
50.00  
49.50  
28.32  
65.00  
75.00  
78.75  
108.  
56.42  
66.67  
74.55  
75.02  
70.09  
70.09  
59.94  
72.81  
75.00  
56.25  
60.32  
72.19  
75.00  
70.09  
60.00  
70.07  
75.03  
75.00  
60  
24.83  
35.00  
49.73  
60.24  
31.47  
31.47  
31.47  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
31.47  
48.36  
56.48  
60.02  
68.70  
44.7  
VGA  
VGA  
VESA  
VESA  
VESA  
SVGA  
VESA  
VESA  
VGA  
XGA  
VESA  
VESA  
VESA  
Non-VESA  
VESA  
VESA  
VESA  
74.02  
108  
135  
60  
75  
60  
63.98  
80  
55  
106  
*Once a mode is optimized, there is no need to make any further adjustment  
as long as the VGA card remains unchanged.  
*Specifications are subject to change without notice.  
16  
Rev.1  
 
Appendix C  
Troubleshooting  
This LCD monitor comes pre-adjusted with standard VGA timing. Due to  
output timing differences among various VGA cards, you may initially  
experience an unstable or unclear display when a new display mode or new  
VGA card is selected.  
Before applying any of the following troubleshooting procedures, you should  
first apply the Auto Adjust option in the OSD menu.  
PROBLEM: Display is unclear and unstable  
To stabilize and clarify your display, open the OSD and adjust the clock and  
phase to obtain a clear display  
PROBLEM: There is no LCD display  
If there is no display on the LCD, refer to the following:  
1. Make sure that the power indicator on the LCD monitor is lit,  
that all connections are secure, and that the system is running  
on the correct timing. Refer to Appendix B for information on  
timing.  
2. Turn off the LCD monitor and then turn it back on again. Press  
the OSD Menu button (refer to Chapter 2) once and then press  
one of the Adjustment Control buttons several times. If there is  
still no display, press the other Adjustment Control button  
several times.  
3. If step 2 does not work, connect your PC system to another  
external CRT. If your PC system functions properly with a CRT  
monitor but it does not function with the LCD monitor, and the  
LCD monitor’s power LED is blinking, the output timing of the  
PC’s VGA card may be out of the LCD’s synchronous range.  
17  
Rev.1  
 
Change to one of the alternate modes listed in Appendix B, or  
replace the VGA card and repeat steps 1 and 2.  
4. If the power LED is not lit, check that the AC power connector is  
securely connected, and verify that the AC adapter LED is lit. If  
the AC adapter LED is not lit, please contact your dealer for  
assistance.  
PROBLEM: The LCD displays “signal out of range” error message  
1. If you have a CRT monitor, please connect the CRT monitor to  
the computer and change the refresh rate down to 60 Hz via  
your video card’s display settings menu. After the setting of 60  
Hz has been change you can then use the LCD on the  
computer.  
2. If you do NOT have a CRT monitor, please make sure both the  
X9WG-NagaV or X9WS-NagaV and your computer is turned off.  
Afterwards turn on the LCD and the computer.  
3. While the computer is turned on, press the “F8” key on your  
keyboard continuously until a selection menu appears and  
select the “Safe Mode” option.  
4. When you’ve entered Safe Mode please uninstall any video  
card driver and monitor driver by using either the “Add /  
Remove Programs” icon or going into “System Properties” and  
manually removing anything under “Monitors” and “Display  
Adapters”.  
5. After removing all the drivers, please reboot your computer and  
you should be able to see windows. Please then proceed to  
install your monitor driver first, then your video card driver.  
Please remember to make sure your refresh rate should be at  
60 Hz.  
18  
Rev.1  
 

PYLE Audio Stereo Amplifier PWMA 1003T User Guide
RadioLAN Network Card 140 MOBILINK User Guide
Radio Shack Wireless Office Headset 43 3906 User Guide
Raritan Computer Computer Drive KX User Guide
Raypak Water Heater 992BD 2342BD User Guide
RCA Satellite TV System ANT1400F User Guide
RF Link Technology Network Router XL 2000 H User Guide
Roland Musical Instrument FP 7 User Guide
Sanyo Car Video System CE42LM4WPR E User Guide
Security 100 Garage Door Opener KE 265 User Guide