A. Thumbnail Mode
B.Deleting Photos in the Internal
Memory
Safety Information
Troubleshooting
MODE/ button
1. Press
during the slideshow to
• Keep away from water, moisture and dust.
• Ambient Temperature should be 0~40°C. Do not
store the unit in hot or cold areas.
No power
enter Thumbnail mode.
1. Press LEFT or RIGHT button to select
in the main menu, and press SEL./
Then Edit Dialog window will appear.
“Edit”
• Check if the AC adapter is plugged into the wall
outlet.
2. Press LEFT or RIGHT button to select the
photo you wish to play, then press SEL./
button.
button.
Digital Photo Frame
LVF-PF72S
• Do not drop the unit or give a strong impact.
• Do not try to disassemble the unit by yourself.
• Connect the AC adapter to the DC5V jack and to
the wall outlet.
• Make sure there is power to the wall outlet.
Unable to view photos
2. Press RIGHT button to select “Delete”, then
press SEL./ button to enter the Edit mode.
3. Press LEFT or RIGHT button to select a photo,
and press DOWN button to select “Delete”, then
Note: If the thumbnail has more than one page,
move the cursor to the last photo and
• This unit is designed to show photos in
standard JPEG format following the camera
industry standard. Some images in non-standard
JPEG format such as web images, scanned
images or photos in RAW format taken by
professional cameras cannot be displayed in
the unit correctly. Please use PC applications to
convert such images into standard JPEG format.
• Check if using compatible memory cards.
If photo display is slow
press RIGHT/
button to go to the next
User Guide
• Use attachments/accessories specified by the
manufacturer only.
page. Move the cursor to the first photo
press SEL./
button to delete it. Press UP
and press LEFT/
previous page.
button to return to the
button to deselect “Delete”.
• When left unused for a long period of time, the unit
should be unplugged from the wall outlet.
Warning: To reduce the risk of fire or electric shock,
do not expose the unit to rain, moisture and water.
Caution: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
Note 1: To delete all, press DOWN button and
press RIGHT button to select “Delete All”,
3. The slideshow starts with the photo selected.
Note 1: Refer to Setup Menu in this user guide for
the slideshow settings.
then press SEL./
button to deselect “Delete All”.
MODE /
button. Press UP
MODE/ button
Note 2: Press
the main menu.
again to return to
Note 2: Press
main menu.
button to return to the
Thank you for purchasing our 7” Digital Photo
Frame. You can play your favorite photos (JPEG
file) directly from a memory card or a USB flash
drive without a computer. Read the following
instructions for more details.
• Use lower resolution photo.
B. Rotation
Auto Rotation
Viewing Files in the Internal
Memory (Figure 10)
Notes
•
In the initial setting of the unit, Auto Rotation
is set to ON in Setup menu. Landscape or
portrait display of a photo will be automatically
switched according to the unit orientation.
If the horizontally placed unit is rotated left
by 90 degrees, the photo will automatically
rotate by 90 degrees clockwise. If the vertically
placed unit is rotated right by 90 degrees, the
photo will automatically rotate by 90 degrees
counterclockwise.
FCC NOTICE
1. Press LEFT or RIGHT button to select
“Favorites” in the main menu, then press SEL./
button.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
2. The slideshow will start from the internal
memory.
4
3
Figure 1
6
5
2
1
3. Press MODE / button to enter the Thumbnail
Mode.
4. Press LEFT or RIGHT button to select the
photo you wish to play, then press SEL./
button.
Canadian ICES-003 Information
This class B digital apparatus complies with
Canadian ICES-003.
12
11
10
7
8
Note 1: When the unit is placed horizontally, Auto
Rotation only works by rotating the unit
to left by 90 degrees. Rotating the unit to
right will not have any response. When
the unit is placed vertically, Auto Rotation
only works by rotating the unit to right by
90 degrees. Rotating the unit to left will
not have any response.
5. The slideshow starts with the photo selected.
CE
Setup Menu
9
This set complies with the EMC Directive 2004/108
and with the LVD Directive 2006/95.
MODE/
1. Press
button to enter the main menu.
2. Press LEFT or RIGHT button to select
“SETUP” in the main menu, then press SEL./
button.
Figure 2
Product Overview (Figure 1)
Landscape position
7
1
2
3
Previous)
(
SD/MMC/MS/xD
slot
LEFT/
button
Attach/Detach position
Portrait position
3. Press UP or DOWN button to select an item in
Note 2: The photo will be scaled down to an
appropriate size to fit in the height or
width of the unit if the photo orientation is
different from its original one.
the Setup menu, and press SEL./
or RIGHT
8
Next)
(
USB port
RIGHT/
button
button to go to the Sub menus as shown in the
below table.
*Supports a USB
ash drive only.
DC5V jack
DOWN/ Brightness)
(
4. Press UP or DOWN button to select a setting,
button
9
Manual Rotation
then press SEL./
to set it.
10
*Each press of the
button will adjust the
brightness level.
Stand receptacle
*For attaching the
supplied stand.
Power switch ON/
OFF
•
Press LEFT or RIGHT button to select the
5. To leave Setup menu, press MODE / button
again.
photo you wish to rotate in the slideshow, then
Landscape Viewing
Portrait Viewing
press UP/
clockwise.
button to rotate by 90 degrees
11
12
4
Rotate) button
(
UP/
OSD menus
Interval Time
Sub menus
5 Sec., 15 Sec. , 30 Sec., 1 Min.,
Figure 3
5 MODE/ (Stop) button
Note 1: Each press of UP/ button will rotate the
photo by 90 degrees clockwise.
6
SEL.(Select) /
button
(Play/
Wall-mounting
holes
5 Min., 30 Min., 1 Hour, 4 Hours,
12 Hours, 1 Day
10.2cm
Pause)
Note 2: Manual Rotation can be also set in the
Thumbnail mode.
Transition
No Effect, Random ,
Cover Up, Cover Down,
Uncover Left, Push Right,
Wipe Up, Wipe Down
12H , 24H
Attaching the Stand (Figure 2)
Note 3: All the rotation effects will be cancelled
when returning to the main menu.
1. Insert the round end of the stand into the
receptacle.
Clock & Calendar Setting (Figure 8)
Figure 4
2. Rotate the stand to the direction as shown in
Figure until it is fixed tightly in position.
Note: The unit can be placed horizontally or
vertically for a landscape or portrait display.
12/24 Hour
Fomat
Caution:
Once power is switched off, the set time and
calendar will be reset, because there is no
battery back up in this unit.
Clock & Calendar Set The Time
Set The Date
Contrast
-4, -3, -2, -1, 0 , +1, +2, +3, +4
Mounting the Photo Frame on Wall
(Figure 3)
OSD Language English , French,
German, Italian,
A.Viewing the Clock & Calendar
1. Press LEFT or RIGHT button to select
“Clock & Calendar” in the main menu and press
SEL./ button.
1. Remove the stand from the unit.
Spanish, Portuguese,
Dutch, Polish
2. Place the mounting holes of the unit on the wall
screws (not supplied) as shown in Figure.
Note: Take care when installing it. It may cause
damage or serious injury should it fall from
its mountings.
Figure 5
(A)
2. Pressing SEL./
button will switch between
Panel
Full Screen, Original*
On , Off
Clock, Calendar and photos of a memory card.
Auto Rotation
Reset
3. Press MODE/
main menu.
button again to return to the
Confirm**
(B)
Exit Setup Mode
Connecting to the Power (Figure 4)
B.Setting Clock & Calendar
1. Press LEFT or RIGHT button to select
“Setup” in the main menu, then press SEL./
button.
*
Select “Original” to display photos in their
original aspect ratios. Black bands appear on
left and right sides of the screen in landscape
view, or top and bottom of the screen in portrait
view. Select “Full Screen” to display photos in
full screen size.
1. Connect one end of the supplied AC adapter
(DC5V/1.5A) to the unit, and the other end to
the wall outlet.
2. Switch the power on ( to the position “I”) to turn
on the unit.
2. Press UP or DOWN button to select “Clock &
Calendar” and then press SEL./ button.
Setting the Time
3. Press UP or DOWN button to select “Set The
Figure 6
Removing and Installing the
Changeable Frame (Figure 5)
** Selecting Reset will restore the initial settings.
(The initial settings are marked by squares in
the above table.)
SD
Time”, and press SEL./
button, then “Set
A.Removing the Changeable Frame
Release all the hooks in the edge of the
Time” window will appear on the screen.
4. Press LEFT or RIGHT button to select Hour,
Minute, Second or AM/PM and set the time by
pressing UP or DOWN button.
Specifications
MMC MS
changeable frame by pulling up the changeable
frame using your fingers.
Display
7" colour TFT LCD panel
B.Installing the Changeable Frame
5. Press LEFT or RIGHT button to select “OK”
and press SEL./ button to set it.
View Area
480 X 234 pixels, 16:9 aspect
1. Hold the changeable frame and place it on the
ratio
Figure 7
unit.
Setting the Date
3. Press UP or DOWN button to select “Set The
Brightness
Contrast
Stand
150 cd/m²
150:1
Thumbnail Mode
Page : 1/1
2. Press the changeable frame for all the hooks to
be fixed in place.
(A)
Date”, and press SEL./
button, then “Set
Now the changeable frame is installed
successfully.
Detachable
Date” window will appear on the screen.
4. Press LEFT or RIGHT button to select Year,
Month or Day and set the calendar by pressing
UP or DOWN button.
Memory Card Slot SD/SDHC/MMC/MS/MS Pro/
xD
Inserting a Memory Card or a
USB Flash Drive (Figure 6)
I/O Ports
DC-in / USB 2.0 port
A bout 45 photos c an
be stored (in case each
photo is less than 32
megapixels).
: Select
1024 X 768
2008/7/25
5. Press LEFT or RIGHT button to select “OK”
and press SEL./ button to set it.
Internal Memory
•
This unit can play only JPEG format.
1. Insert your memory card into the memory card
slot according to the orientation marked on the
back of the unit.
6. To leave the Setup menu, press MODE/
button again.
(B)
Editing Files in the Internal Memory
(Figure 9)
Supported File
Format
JPEG (up to approx. 144
megapixels)
Caution: Do not insert “Memory Stick Duo” or
“Memory Stick Pro Duo” into the unit. In case
of using them, be sure to attach “Memory Stick
Adapter” in order not to have a trouble to
remove it from the unit.
Figure 8
A. Copying Photos from a Memory Card
or a USB Flash Drive
AC Adapter
Input: 100-240V ~50/60Hz
0.4A
2008.1.1
Sun Mon Tue Wed Thu Fri Sat
For EU users only
(A)
1
8
15
22
2
9
16
23
3
4
5
AM
6
13
20
7
14
21
10
17
24
11
18
25
12
19
26
12:00:00
Output: 5V / 1.5A
1. Press LEFT or RIGHT button to select
in the main menu, and press SEL./
Then “Edit Dialog” window will appear.
“Edit”
27
28
29
30
31
Jan - 1- 2008 Tuesday
button.
Dimensions
Approx.
Your SANYO product is designed and manufactured
with high quality materials and components which
can be recycled and reused. This symbol means
that electrical and electronic equipment, at their
end-of-life, should be disposed of separately from
your household waste. Please dispose of this
equipment at your local community waste collection/
recycling centre. In the European Union there are
separate collection systems for used electrical and
electronic products. Please help us to conserve the
environment we live in!
206 x 139 x 33 mm
(W x H x D)
2. Insert a USB flash drive to the USB port.
Note: This unit can display photos in either a
memory card or a USB flash drive at a
time. If a USB flash drive and a SD/MMC/
MS/xD card are inserted in the unit at the
same time, files in the USB flash drive will
be displayed. If you want to display files in
a SD/MMC/MS/xD card, remove the USB
flash drive from the unit.
Set Time
Set Date
2008/01/01
OK Cancel
2. Press LEFT or RIGHT button to select “Copy”,
then press SEL./ button to enter the
Sub-menu.
(B)
12:00:00 AM
OK Cancel
(Without Detachable Stand
and Changeable Frame)
Approx.
3. Press UP or DOWN button to select a file, then
Weight
Figure 9
press SEL./
to copy.
button to select photos you wish
File Number: 1/100
ROOT
SUPPORT
PICTURES
337g
001_1
002_2
003_3
003_4
003_5
003_6
1
2
3
4
5
6
(A)
Note 1: Press SEL./
button on the selected
(Without Detachable Stand
folder to enter the Sub-menu.
and Changeable Frame)
AC adapter
1024
X
768
2006/3/7
Save
Exit
File Number: 1/100
ROOT
Note 2: To deselect the file, press SEL./
button
Save File
Please Wait
SUPPORT
PICTURES
Accessories
001_1
002_2
003_3
003_4
003_5
003_6
1
2
3
4
5
6
again on the selected file.
Viewing Photos and Slide Shows
(Figure 7)
Detachable stand
100%
Note 3: Repeat the above step 3 to select some
files and the selected files will be
Manufacturer and Address
SANYO Electric Co., Ltd.
5-5, Keihan-hondori, 2-chome, Moriguchi City
Osaka, Japan
White changeable frame
1024
X
768
2006/3/7
Save
Exit
Page: 1/1
Edit Mode
Note: Displaying photos bigger than 480 x 234
pixels will take longer time for loading.
1. Press LEFT or RIGHT button to select
“Photo” in the main menu, then press SEL./
button to confirm.
(Attached to the unit)
User Guide
highlighted.
(B)
Note 4: The internal memory can store about 45
photos in case each photo is less than 32
megapixels.
Authorized Representative and Address
SANYO FISHER Sales(Europe) GmbH
Stahlgruberring 4,D-81829 Munich, Germany
6 bonus static stickers
Delete
Delete All
1600x900
2008/07/25
Figure 10
4. Press RIGHT button and then LEFT button to
select “Save”, then press SEL./ button.
5. The file is now saved in the internal memory.
6. To exit Edit mode, press LEFT or RIGHT button
to select "Exit", then press SEL./ button.
Thumbnail Mode
Page : 1/1
2. The slideshow starts.
Trademark Information
3. To pause the slideshow, press SEL./
button.
Press SEL./
slideshow.
button again to restart the
SD™ is a trademark.
:
Select
1024
X
768
2008/7/25
LVF-PF72S EN QG ( rev0317).indd
1
2009/3/18
下午 02:04:36
|