Sanyo Digital Camera VCC 4794 User Guide

English Français Español  
SPECIFICATIONS  
INFORMATION TO USER  
PRECAUTIONS  
Safety Guard  
Scanning system  
: NTSC standard 525 lines, 60 fields/sec.  
In case of a problem  
Image sensor  
: 1/3" interline transfer method CCD  
Do not use the unit if smoke or a strange odor comes from the unit,  
or if it seems not to function correctly. Turn off the power  
immediately and disconnect the power cord, and then consult your  
dealer or an Authorized Sanyo Service Center.  
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT  
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE  
LITERATURE ACCOMPANYING THIS UNIT.  
Number of effective pixels : 768 (H) x 494 (V)  
INSTRUCTION MANUAL  
Horizontal resolution  
: More than 520 TV lines  
VCC-4794  
Minimum illumination  
(approx.)  
(Warranty attached)  
: Gain high: 0.01 lx (F 1.2, B/W mode),  
0.45 lx (F1.2, color mode)  
WARNING:  
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
Gain normal: 0.02 lx (F 1.2, B/W mode),  
0.6 lx (F1.2, color mode)  
Do not open or modify  
Color CCD Camera  
Do not open the cabinet, as it may be dangerous and cause damage  
to the unit. For repairs, consult your dealer or an Authorized Sanyo  
Service Center.  
Video output  
: 1.0 V(p-p)/75 , composite, BNC  
For the customers in Canada  
This Class B digital apparatus complies with Canadian ICES-003.  
Pour la clientèle canadienne  
Cet appareil numerique de la Classe B est conforme à la norme  
NMB-003 du Canada.  
Video S/N ratio  
: More than 48 dB (AGC off: More than 50 dB)  
Backlight compensation  
: OFF, Multi-spot metering (Normal/High), Center zone  
metering  
Do not put objects inside the unit  
About this manual  
White balance  
Gain control  
: ATW/Manual  
Make sure that no metal objects or flammable substance get inside  
the unit. If used with a foreign object inside, it could cause a fire, a  
short-circuit or damage. Be careful to protect the unit from rain, sea  
water, etc. If water or liquid gets inside the unit, turn off the power  
immediately and disconnect the power cord, and then consult your  
dealer or an Authorized Sanyo Service Center.  
: Normal/High  
Before installing and using the camera, please read this manual carefully.  
Be sure to keep it handy for later reference.  
This installation should be made by a qualified service person and should  
conform to all local codes.  
Light control  
: Optical auto iris lens/Electronic iris (indoor use)  
: CS mount  
Lens mount  
Flange back  
: 12.5 mm 0.5 mm adjustment  
: Normal/Sharp  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
a DIMENSIONS  
Aperture compensation  
Sync system  
136 (5.35)  
127 (5.0)  
: Internal sync/Line lock  
1 (0.04)  
67 (2.64)  
3 (0.12)  
Day/Night mode  
Operating Environment  
: Auto (Low/High), Manual (at CONTROL terminal)  
: Temperature: –10°C – +50°C (14°F – 122°F)  
Humidity: less than 90 % RH (no condensation)  
Be careful when handling the unit  
To prevent damage, do not drop the unit or subject it to strong shock  
or vibration.  
Power supply  
: 24 V AC 10%, 60 Hz/ 12 – 15 V DC  
Power consumption  
(approx.)  
: 3.7 W (with auto-iris lens)  
Do not install this unit close to magnetic fields  
The magnetic fields may result in unstable operation.  
Weight (approx.)  
: 400 g (14.1 oz) (without lens)  
11 (0.43)  
1/4”-20 UNC  
Unit: mm (inch)  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
15.4  
(0.61)  
Appearance and specifications are subject to change without prior notice  
or obligations.  
28 (1.10)  
Protect from humidity and dust  
To prevent damage, do not install the unit where there is greasy  
smoke or steam, where the humidity may get too high, or where  
there is a lot of dust.  
Consult the dealer or an experienced radio/TV technician for help.  
24.4 (0.96)  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
Changes or modifications not expressly approved by Sanyo may void the user's  
authority to operate this camera.  
Depending on the conditions of use, installation and environment,  
please be sure to make the appropriate settings and adjustments.  
If you need help with installation and/or settings, please consult  
your dealer or an Authorized Sanyo Service Center.  
Printed on recycled paper  
Protect from high temperatures  
Do not install close to stoves, or other heat sources, such as  
spotlights, etc., or where it could be subject to direct sunlight, as this  
could cause deformation, discoloration or other damages.  
1AC6P1P2978--  
L5BG2/US (0805KP-SY)  
SANYO Electric Co., Ltd.  
Printed in Japan  
Be careful when installing close to the ceiling, in a kitchen or boiler  
room, as the temperature may rise to high levels.  
Cleaning  
TROUBLESHOOTING  
Before sending the camera out for repair, check the items below.  
If the problem persists after checking these items, consult your  
dealer or an Authorized Sanyo Service Center.  
• Dirt can be removed from the cabinet by wiping it with a soft cloth.  
To remove stains, wipe with a soft cloth moistened with a soft  
detergent solution and wrung dry, then dry by wiping with a soft  
cloth.  
EXCLUSIONS  
SANYO INDUSTRIAL VIDEO  
COLOR CCD CAMERA LIMITED WARRANTY  
This warranty does not cover (A) the adjustment of customer-operated controls as  
explained in the appropriate model's instruction manual, or (B) the repair of any  
product whose serial number has been altered, defaced or removed.  
OBLIGATIONS  
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine  
maintenance.  
This warranty does not apply to uncrating, setup, installation, removal of the product  
for repair or reinstallation of the product after repair.  
This warranty does not apply to repairs or replacements necessitated by any cause  
beyond the control of SFC including, but not limited to, any malfunction, defect or  
failure caused by or resulting from unauthorized service or parts, improper  
maintenance, operation contrary to furnished instructions, shipping or transit  
accidents, modification or repair by the user, abuse, misuse, neglect, accident,  
incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear.  
The foregoing is in lieu of all other expressed warranties and SFC does not assume  
or authorize any party to assume for it any other obligation or liability.  
In order to obtain warranty service, the product must be delivered to and picked up  
from an Authorized Sanyo Service Center at the user's expense, unless specifically  
stated otherwise in this warranty. The names and addresses of Authorized Sanyo  
Service Centers may be obtained by calling the toll-free number listed below.  
• Do not use benzine, thinner or other chemical products on the  
cabinet, as this may cause deformation and paint peeling. Before  
using a chemical cloth, make sure to read all accompanying  
instructions. Make sure that no plastic or rubber material comes  
into contact with the cabinet for a long period of time, as this may  
cause damage or paint peeling.  
If no image appears  
• Is the coaxial cable attached securely?  
• Are the power and voltage normal?  
• Has the iris of the lens been adjusted correctly (with the LEVEL  
dial)?  
For product operation, authorized service center referral, service assistance or  
problem resolution, call  
CUSTOMER INFORMATION 1-800-421-5013  
Weekdays 8:30 AM - 5:00 PM Pacific Time  
For accessories and/or parts, call  
• Is there adequate illumination?  
If the image is unclear  
• Is the monitor adjusted correctly?  
PARTS ORDER INFORMATION 1-800-726-9662  
Weekdays 8:30 AM - 5:00 PM Pacific Time  
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH  
REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR  
ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM  
THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE  
PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO  
CAUSES BEYOND ITS CONTROL. SFC'S LIABILITY FOR ANY AND ALL LOSSES  
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, ARISING OUT  
OF OR IN CONNECTION WITH THE SALE, USE OR OWNERSHIP OF THIS  
PRODUCT INCLUDING WARRANTOR'S NEGLIGENCE, ALLEGED DAMAGED OR  
DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR  
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE  
PRODUCT.  
• Is the flange-back position correctly set?  
• Is the lens in focus?  
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR  
RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL U.S.  
TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO  
THE ORIGINAL RETAIL PURCHASER OR END-USER. THE ORIGINAL DATED  
BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED  
TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY  
SERVICE IS REQUESTED.  
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher  
Company warrants this SANYO product against defects in materials and  
workmanship for the periods specified below. SFC will repair or replace (at its option)  
the product and any of its parts which fail to conform to this warranty. The warranty  
period commences on the date the product was first purchased or rented at retail.  
• Is the lens clean?  
Dirt or fingerprints on the lens can adversely affect the image.  
Gently wipe any dirt or fingerprints off the lens with a soft cloth or  
lens cleaning paper and cleaning fluid (commercially available).  
ATTENTION  
SERVICE  
For your protection in the event of theft or loss of this product, please fill in the  
information below for you own personal records.  
LABOR  
PARTS  
IMAGE DEVICE  
3 YEARS  
The camera is a precision instrument. Handle it carefully and always  
follow the safety precautions. If the camera requires service, never  
try to repair it yourself or open the casing.  
Model No.  
Serial No.  
3 YEARS  
3 YEARS  
(Located on back or bottom side of unit.)  
Date of Purchase  
Where Purchased  
Purchase Price  
For servicing, maintenance, or repairs, consult your dealer or an  
Authorized Sanyo Service Center.  
 

PYLE Audio TV Mount PSWLE55 User Guide
Radio Shack Mouse 26 552 A User Guide
RCA TV DVD Combo 20F510TD User Guide
Regal Ware Microwave Oven K6725 User Guide
Samsung Computer Monitor 150s User Guide
Samsung CRT Television 2BH0 User Guide
Samsung Telephone ITP 5107SIP User Guide
Sanyo Battery Charger KR DHL User Guide
Scag Power Equipment Lawn Mower SCZ User Guide
Scientific Atlanta DVD Player 4250HDC User Guide