Sanyo CRT Television DS24425 User Guide

AS  
Model No.:  
No. de Modelo:  
No de modèle :  
DS24425  
Color TV Owner’s Manual  
Color TV Manual Del Propietario  
Manuel d’instructions du télécouleur  
“Read this manual before assembling  
(or using) this product.”  
POWER  
VOL  
CH  
MENU  
FLAT  
S
CREEN  
R
IN  
L
AUDIO  
VIDEO  
CONTENTS  
Important Safety Instructions . . . . . . 2  
Welcome to the World of Sanyo . . . . 3  
Features . . . . . . . . . . . . . . . . . . . . . . . 3  
Specifications . . . . . . . . . . . . . . . . . . . 3  
Basic Set-up and Connections . . . . . . 4  
Front & Rear Panel . . . . . . . . . . . . . . 5  
Using the Component Video  
TV Adjustment and Setup  
Warranty (Mexico) . . . . . . . . . . . . . . 16  
Warranty (U.S.A. and Canada) . . . . . 17  
Child Safety Matters . . . . . . Back Cover  
How to Operate the  
On-Screen Menu . . . . . . . . . . . . . . 10  
Audio Mode . . . . . . . . . . . . . . . . . 11  
Adjusting Picture/Sound . . . . . . . . 11  
Adding or Deleting a Channel . . . . 11  
Aspect Ratio . . . . . . . . . . . . . . . . . 12  
Closed-Captioning . . . . . . . . . . . . . . 12  
V-Guide (Parental Control) . . . 13 ~ 14  
Care and Cleaning . . . . . . . . . . . . . . 14  
Helpful Hints (problems/solutions) . 15  
ESPAÑOL . . . . . . . . . . . . . . 18 ~ 35  
Contenido . . . . . . . . . . . . . . . . . . . 18  
and Audio Input Jacks . . . . . . . . . . . . 6  
Using the Front A/V Input Jacks . . . . 7  
Using the Rear A/ V Input Jacks . . . . 8  
Using the Remote Control . . . . . 9 ~ 10  
FRANÇAIS . . . . . . . . . . . . . . 36 ~ 51  
Table des matières . . . . . . . . . . . . 36  
Importado Por :  
Printed in U.S.A. SMC, March 2005  
Impreso en U.S.A. SMC, Marzo 2005  
Imprimé aux É.-U. SMC, mars 2005  
Comercializadora México  
Americana, S. DE R.L. DE C.V.  
Nextengo Nº 78  
Col. Santa Cruz Acayucan  
Del. Azcapotzalco, México D.F. C.P.  
02770, RFC CMA 9109119L0  
Telefono: 55-5328-3500  
Part No. / No. de Parte/  
o
N
de pièce : 1JC6P1P0173A–  
Service Code/Código de Servicio/  
Code de service : 610 312 9181  
 
Welcome to the World of Sanyo  
Thank you for purchasing a Sanyo Color Television. You made an excellent choice for Performance, Styling,  
Reliability, and Value. The TV is designed with easy to use on-screen set-up instructions and operating features.  
Please retain this owner’s manual for future reference. Need assistance? Visit our Web site at  
www.sanyoctv.com or call toll free 1-800-877-5032.We can help!  
FEATURES  
N Trilingual On-Screen Menu  
N Automatic Channel Search  
N Auto Shut Off  
N Game Mode  
N Automatic Fine Tuning  
VHF and Cable Channels  
N Aspect Ratio setting  
N 480i Component AV Input Jacks  
N 24-Key Remote Control  
0~9 Numbered Channel Selection  
Channel Scanning  
N Closed-Captioning/Quikcap  
N Digital picture controls with  
on-screen display  
N Audio/Video In Jacks  
2 sets—Front (AV1), Rear (AV2)  
N S-Video In Jack  
Volume  
Power  
Display  
Caption  
Menu  
Mute  
N MTS stereo/SAP Decoder  
N Auto Flesh Tone  
N Sleep Timer (3 hours)  
N TV Reset  
Recall  
Sleep  
N Factory preset adjustments for  
picture/sound  
Reset  
N 181 Channel Tuning System  
VHF Channels 2-13  
V-Guide  
N Front Surround Sound  
N Tone  
Input  
UHF Channels 14-69  
Cable TV (CATV) 1, 14-125  
N V-Guide (Parental Control)  
SPECIFICATIONS  
PICTURE TUBE SIZE, True Flat Screen  
DEPTH DIM. (Thickness) . . . . . . . . . . . . . . . . . 18.9 in. (480mm)  
WEIGHT (Approx.) . . . . . . . . . . . . . . . . . . . . 60.1 lbs. (27.3 Kg.)  
SOUND (2 Speakers) . . . . . . . . . . . . . . . . . . . . . . . Size: 5x9 cm  
AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in with 1W/ch  
(Measured Diagonally) . . . . . . . . . . . . . . . . . . . . . . . . . 24-inches  
PICTURE RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . 260 Lines  
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Lines  
AUDIO/VIDEO INPUT JACKS . . . . . . . . . . . . . . . . . . . . . Video Input  
. . . . . . . . . . . . . . . . . . . . Audio Input (2 sets, R/L – Front/Rear)  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-Video Input  
ANTENNA INPUT . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75  
POWER REQUIREMENT . . . . . . . . . . . . . . . . . . . . . 120VAC 60Hz  
POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 watts  
480i COMPONENT VIDEO  
INPUT JACKS . . . . . . Component Video Inputs (Y, Pb, Pr – R/L)  
HORIZONTAL DIM. (Width) . . . . . . . . . . . . . . . . 26.6 in. (677mm)  
CAUTION: FCC Regulations state that improper modifica-  
tions or unauthorized changes to this unit may  
void the user’s authority to operate the unit.  
VERTICAL DIM. (Height) . . . . . . . . . . . . . . . . . 20.6 in. (524mm)  
This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc.  
It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,  
casualty and electrical hazards.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
3
 
BASIC SET-UP AND CONNECTIONS  
INITIAL SET-UP  
Press POWER key to turn on TV.  
5. Follow on-screen instructions, see  
pages 10 ~ 12.  
Install batteries in remote control,  
see page 9.  
4.  
1.  
Connect signal, see below.  
Plug in AC power cord.  
2.  
3.  
CONNECTING CABLE SERVICE, OR RF ANTENNA, OR SATELLITE DISH  
RECEIVER TO TV  
RF Antenna  
Satellite Receiver  
Cable Box  
OR  
OR  
CATV IN  
CH3  
CH4  
Operational Tip for No Signal  
Connection:  
VIDEO  
VIDEO  
L-AUDIO-R  
L-AUDIO-R  
IN FROM  
SAT.  
OUT TO TV  
S-VIDEO  
IN  
OUT  
If the TV is used as a monitor only, with a  
DVD player or some other type of external  
equipment, and no cable or antenna signal  
is available, the following setup is  
necessary:  
Notes:  
– If you do not have a  
cable box, connect  
cable directly to TV  
75 ohm jack or VCR.  
– If you do not have a  
VCR, connect signal  
directly to TV 75 ohm  
jack.  
VCR Back  
IN  
FROM ANT.  
OUT  
OUT TO TV  
Your TV is designed to automatically  
search for available channels. Therefore,  
the initial start up requires that you press  
the MENU key, enabling the TV to auto-  
matically go through the channel search  
process before you can operate the TV.  
After the initial channel search is com-  
pleted, you must press the MENU key  
again to complete the channel search  
process. This may take several minutes.  
TV Back  
UHF/VCATV  
COMPONENT AUDIO VIDEO  
INPUT 2  
2
CATV FRANCHISE NOTE:  
Cable companies, like public  
utilities, are franchised by  
local government authorities.  
To receive cable programs,  
even with equipment which is  
capable of receiving cable  
channels, the consumer  
must subscribe to the cable  
company’s service.  
VIDEO  
Y
(MONO)  
P
B
L
P
R
R
S-VIDEO  
– After the channel search process is com-  
plete (2 searches), you can press the  
INPUT key on the remote control to use  
the TV as a monitor.  
I
Exception—When the Video mode is selected, the TV will  
not automatically switch off when signal reception has  
stopped for 15 minutes.  
The TV will automatically select the correct Antenna  
mode for the type of RF signal you connect.  
I
TV will switch off automatically after 15 minutes if there  
is no signal reception (cable out or station not broad-  
casting).  
I
If you move the TV to a new location, press the RESET  
key twice after connecting the signal and turning on the  
TV.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
4
 
FRONT AND REAR PANELS  
FRONT  
VIDEO IN L- AUDIO -R  
MENU  
CH  
VOL  
POWER  
Audio Video Input Jacks (AV1)  
Connect video equipment here (see page 7).  
BACK  
UHF/VHF/CATV  
COMPONENT  
AUDIO VIDEO  
INPUT 2  
75  
2
480i Component Video In Jacks  
(Component 2: Y, Pb, Pr)  
Connect video equipment here  
(see page 6).  
VIDEO  
Y
(MONO)  
L
P
B
R
Note: Audio Video Input 2 (AV2) and  
Component inputs share the same  
audio (R/L) input jacks.  
P
R
S-VIDEO  
Audio Video Input 2 Jacks (AV2)  
Connect video equipment here (see pages 6 and 8).  
S-Video In Terminal  
To enhance video detail use the AV2  
S-Video jack instead of the AV2 Video jack,  
if available on your external equipment. (An  
S-Video connection will override connection to  
the AV2 video input jack. See page 8.)  
Note: S-Video connection will override an AV2  
video connection.  
POSITIONING THE TV  
Do not position the TV in a confined  
area. Allow space for normal air  
circulation around electronic parts.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
5
 
USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS  
CONNECTING A DVD PLAYER  
Switch off TV and external equipment before connecting  
Notes: DVD Player component output must be set to  
cables. (Cables are not supplied.)  
Interlaced (480i).  
Audio Video Input 2 (AV2) and Component inputs  
share the same audio (R/L) input jacks.  
Connect a DVD Player or other equipment’s interlaced  
Component Video Out to the TV Component Video In  
(Y-Pb-Pr) Jacks.  
Connect equipment to the Component2 video  
input or the AV2 video input, but not both types at  
the same time.  
ƒ Connect the DVD Player’s Audio Out to the TV AV2  
Audio In (L/R) Jacks.  
Press POWER to turn on the TV. Turn on external  
equipment also.  
To access Audio Video inputs, press the INPUT key to  
select COMPONENT2.  
DVD Player  
What you will need for connections:  
VIDEO OUT  
AUDIO OUT  
COMPONENT VIDEO OUT  
VIDEO OUT  
SELECT  
Component video cable – 1  
S-VIDEO COMPONENT  
COAXIAL  
L
R
Y
PB  
PR  
/CR  
/CB  
ƒ Audio Cable – 1  
Remote Control  
POWER  
DIGITAL OUT  
S-VIDEO OUT  
ƒ
TV BACK  
UHF/VHF/CATV  
COMPONENT  
2
AUDIO VIDEO  
INPUT 2  
75  
INPUT  
RESET  
VIDEO  
L
Y
PB  
PR  
R
S-VIDEO  
I
A solid Blue screen with COMPONENT2 displayed  
means that the Video mode is selected, but no signal  
is being detected at the Component jacks. Check con-  
nection, and turn on external equipment.  
I Press INPUT key after connecting cables to access  
the AV inputs.There is NO need to tune to a blank  
channel.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
6
 
USING THE FRONT VIDEO AND AUDIO INPUT JACKS  
CONNECTING A VIDEO GAME OR OTHER  
EQUIPMENT  
Switch off TV and external equipment before connecting  
cables. (Cables are not supplied.)  
ƒ Press POWER to turn on the TV. Turn on external  
equipment also.  
Connect game Audio Output (R/L) to the TV Audio  
Input (R/L). Then connect game Video Output to the  
TV Video Input.  
To access Audio Video inputs, press the INPUT key to  
select GAME or select using the menu.  
What you will need for connections:  
VIDEO IN L- AUDIO -R  
Audio Cable – 1  
U  
CH  
VOL  
POWER  
Remote Control  
POWER  
INPUT  
RESET  
Video Game  
Camcorder  
ƒ
I A solid Blue screen with the word VIDEO1 displayed,  
means that the Video mode is selected, but no signal is  
being detected at the Video jacks. Check connections,  
turn on external equipment.  
I Press INPUT key after connecting cables to access  
the AV inputs. There is NO need to tune to a blank  
channel.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
7
 
USING THE REAR AUDIO/ VIDEO INPUT JACKS  
CONNECTING A VCR  
OR OTHER EQUIPMENT  
Switch off TV and external equipment before connecting  
cables. (Cables are not supplied.)  
Using the S-Video jack overrides the Video (AV2) jack.  
Press POWER to turn on the TV. Turn on external  
ƒ
Connect VCR or other equipment’s Audio Video Out to  
the TV Audio Video Input.  
equipment also.  
To access Audio Video inputs, press the INPUT key  
to select VIDEO2.  
For Mono VCR (Single Audio Jack) connect VCR  
Audio Out to TV Audio (L) Input.  
Note: Audio Video Input (AV2) and Component  
inputs share the same audio (R/L) input jacks.  
OR  
x
Connect DVD Player or other equipment’s S-Video  
Out and Audio Out to the TV S-Video and Audio In  
Jacks.  
Back View of VCR  
Remote Control  
DVD Player  
VIDEO OUT  
AUDIO OUT  
COMPONENT VIDEO OUT  
IN  
VIDEO OUT  
SELECT  
FROM ANT.  
IN  
VHF/UHF  
R-AUDIO-L  
R-AUDIO-L  
VIDEO  
VIDEO  
RF  
S-VIDEO COMPONENT  
CHANNEL  
4
TO TV  
COAXIAL  
L
R
Y
PB  
PR  
/CR  
/CB  
3
OUT  
DIGITAL OUT  
S-VIDEO OUT  
OUT  
POWER  
INPUT  
RESET  
x
x
Rear TV AV Input Jacks  
ƒ
UHF/VHF/CATV  
75  
COMPONENT AUDIO VIDEO  
INPUT 2  
2
VIDEO  
What you will need for connections:  
AV Cable – 1  
L
OPTIONAL CONNECTION  
R
S-Video Cable – 1  
Audio Cable – 1  
x
x
S-VIDEO  
I
I
I
Make sure all cable connectors are fully seated on jacks.  
A solid Blue screen with the word VIDEO2 displayed,  
means that the Video mode is selected, but no signal is  
being detected at the Video jacks. Check connections,  
turn on external equipment.  
Always match AV cables according to the colors; red for  
right audio, white for left audio and yellow for video.  
Press INPUT key after connecting cables to access  
the A/V inputs. There is NO need to tune to a blank  
channel.  
I
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
8
 
USING THE REMOTE CONTROL  
INSTALL BATTERIES AS SHOWN (2 AAA, not included)  
Notes:  
Do not mix old batteries with new ones or mix different types of  
batteries together.  
Remove the batteries if the remote control will not be used for a  
month or more. Weak batteries may leak and cause damage.  
(Normal battery life is roughly six months.)  
IMPORTANT NOTE: Spent or discharged batteries must be recycled or  
disposed properly in compliance with all applicable laws. For detailed  
information, contact your local County Solid Waste Authority.  
REMOTE CONTROL KEYS  
Power Key—Press to turn TV ON or OFF.  
Œ
Input Key—Press to select the program source to watch:  
TV signal or signal from DVD Player or other equipment  
you have connected to the A/V jacks.  

Point towards TV  
Number Keys—Press two keys to select a channel.  
Ž
Œ

Example: Press 0 then 6 to select channel 6. For cable  
channels 100 through 125, press and hold the 1 key until  
C1appears. Then press the other two numbers.  
POWER  
INPUT  
RESET  
1
4
2
5
8
0
3
6
Caption Key—(See page 12.)  

Menu Key—Use this key with the LM and – + keys to  
navigate and adjust features of the on-screen menu system.  
(See pages 10 ~ 12.)  

Ž
7
9
CAPTION  
SLEEP  
Channel Scanning (CH LM) and Volume (VOL – +)  
Keys—Press to scan through the channels in memory and  
to adjust the volume.  


MENU  
RECALL  
CH  
VOL  
VOL  
I
Be sure batteries are installed correctly.  
MUTE  
DISPLAY  
CH  
I
Point the remote control toward the TV. Objects between  
the remote control may cause misoperation of the remote  
control function.  
I
Cannot select channel with number keys. Press 0” in  
front of numbers 1~9. Example: Channel 05.  
I
Adjusting the volume level: Flashing Right arrow  
indicates volume is increasing and flashing Left arrow  
indicates volume is decreasing.  
(Continued on page 10.)  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
9
 
REMOTE CONTROL KEYS (CONTINUED)  
Mute Key—Press once to minimize the volume. Press again to  
restore.  
V-Guide Key—See pages 13 ~ 14.  
POWER  
INPUT  
RESET  
Reset Key—Press this key twice to restore factory settings. The  
TV will automatically start Channel Search and clear all cus-  
tomized settings. These features will automatically reset:  
1
4
2
5
8
0
3
6
Picture Adjustments: Color, Tint,  
Contrast, Bright, Sharpness,  
Tone, and Surround  
Caption to OFF  
V-Guide to OFF  
Language to English  
Sleep Timer  
Audio to Stereo  
Aspect Ratio to 4:3 (normal)  
Channel Memory  
7
9
Video to TV  
CAPTION  
SLEEP  
If desired, personal settings can be made again using the menu  
options.  
MENU  
RECALL  
11  
CH  
Sleep Key—Press this key then press the “0” key to set the Sleep  
Timer. The desired time can be set from 30 minutes up to 3 hours  
in 30-minute increments. Sleep Timer will switch off the TV  
automatically.  
VOL  
VOL  
MUTE  
DISPLAY  
CH  
Note: The Sleep Timer cancels when the TV is turned off or  
if a power failure occurs.  
12  
V-GUIDE  
Recall Key—Press to switch between the last two channels you  
selected.  
11  
12  
Display Key—Press once to display the channel number. Press  
twice to display the channel number continuously. Press again to  
remove the channel number.  
TV ADJUSTMENT AND SETUP  
The on-screen menu provides the viewer with easy access to adjustments and settings.  
Just use the keys on the remote control and follow the on-screen instructions.  
HOW TO OPERATE THE ON-SCREEN MENU  
LM keys  
– + keys  
Audio  
±
Stereo Mono  
1. Press MENU key.  
SAP  
Picture/Sound  
2. Use the LM keys to highlight the desired feature.  
±
Auto  
Game  
Cable  
NO  
Manual  
3. Use the – + keys to choose desired option. (  
±
indicates selected item.)  
Antenna  
CH. Search  
CH. Scan Memory C 34  
Aspect Ratio  
±
±
VHF/UHF  
Start  
Added  
16:9  
Espanol  
4. Press the MENU key to exit.  
±4:3  
Items with submenus require additional steps.  
Menu Language  
±English Francais  
Press MENU key to exit  
Note: The menu will display on the screen for approximately  
20 seconds. Press Menu again to redisplay.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
10  
 
SETTING AUDIO MODE  
Select desired sound setting, Stereo, Mono, or SAP  
(secondary audio program).  
RESETTING THE ANTENNA/CABLE MODE  
AND CHANNEL SEARCH  
Resetting the Antenna/Cable Mode or CH. (Channel)  
Search is required only if additional channels become  
available, such as moving to another city or having a cable  
service installed.  
Note: Stereo and SAP must be part of the broadcast  
signal.  
1. Choose Stereo, Mono, or SAP from the Audio options.  
CH. Search  
NO  
±Start  
1. Choose Start from  
the Ch. Search  
menu options.  
CH. Scan Memory  
Aspect Ratio  
Note: The TV will automatically reset to stereo if  
unplugged or a power failure occurs.  
Menu Language  
Press MENU key to exit  
LM keys  
– + keys  
Audio  
±Stereo Mono SAP  
ADDING OR DELETING CHANNELS  
1. Press the MENU key.  
2. Use the LM keys to highlight CH. Scan Memory.  
3. Press the + key to highlight channel number entry area.  
ADJUSTING PICTURE/SOUND  
For automatic picture/sound adjustment  
4. Enter the channel number you want to add or delete  
(example): C34. For cable channels above 99, press and  
hold the 1 key until C1– – appears. Then enter the other  
two numbers.  
Choose Auto from the Picture/Sound options.  
Adjust the picture/sound manually  
1. Choose Manual from the Picture/Sound options.  
5. Press the + key to change the present setting. Example:  
Added will change to Deleted. This takes about three  
seconds. During that time, the word “Added” or  
“Deleted” will become yellow.  
2. Press the MENU key to open the picture/sound  
settings submenu.  
3. Use the LM keys to highlight the picture or sound  
setting you want to change.  
6. Use the 0 ~ 9 or LM keys to choose other channels to  
delete or add,  
4. Use the – + keys to adjust settings.  
CH. Scan Memory  
Aspect Ratio  
Menu Language  
C 34 Deleted  
or press the  
MENU key  
to exit.  
For automatic game settings  
1. Choose Game from the Picture/Sound options.  
The screen andsound will automatically change to  
factory preset settings.  
Select channel using LM, 0~9 keys  
Press MENU key to exit  
2. Press the MENU key to exit.  
Note: Select the front A/V input jacks by pressing  
the INPUT key on the remote control.  
I
I
I
I
I
I
The menu will display on the screen for approximately 20  
seconds. Press MENU again to redisplay.  
LM keys  
Audio  
– + keys  
Under weak stereo signal conditions, you may receive better  
quality sound in the “Mono” position.  
Picture /Sound  
Auto  
Game  
±Manual  
Surround sound will expand the sound effect while receiv-  
ing MTS stereo signals.  
LM keys  
– + keys  
When setting the Antenna mode, choose Cable if your TV  
is connected to a cable system, otherwise choose VHF/UHF.  
Color  
Tint  
Contrast  
Brightness  
Sharpness  
Channels deleted from scan memory can be selected with  
the number keys.  
Restoring deleted channels, use the on-screen menu to  
manually add channels, or start CH. (Channel) Search from  
the menu, or press the RESET key twice. (It may take a few  
minutes to search thru the available channels.)  
Tone  
L- - - - IS S S S S SH  
OFF O N  
Surround  
±
Press MENU key to exit  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
11  
 
ASPECT RATIO  
Use this feature when equipment is connected to the com-  
ponent input jacks. The 4:3 setting is for normal viewing.  
The 16:9 setting changes the picture image to widescreen  
viewing with minimal portion of top and bottom  
compressed.  
2. Use the LM keys to highlight Aspect Ratio.  
3. Press the – + keys to select 4:3 or 16:9.  
Aspect Ratio  
±4:3 16:9  
Menu Language  
1. Press the MENU key.  
Press MENU key to exit  
CLOSED-CAPTIONING  
Captioning is text information transmitted along with the picture and sound so it can be displayed on the TV screen.  
Because different types of captions can be transmitted with the TV signal, separate captioning modes are provided. The  
captioning modes recognized by this model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which  
caption signals to transmit.  
CAPTION1: Main mode used for  
program captioning (words match the  
program you are watching). These cap-  
tions are generally one or two lines.  
TEXT2: An alternative mode used to display large amounts  
of text (same as Text1).  
QUIKCAP: Allows captions to toggle on and off with  
the Mute function. Press the MUTE key on the remote  
control to block the TV sound; the captions display auto-  
matically. Press the MUTE key again to restore the  
sound, the captions will disappear. Quikcap displays  
program captions in the Caption1 mode.  
TWO OUTS AND TWO STRIKES  
CAPTION2: An alternative mode for  
program captioning. Caption2 may be  
used by the broadcaster to provide cap-  
tions in another language, such as,  
Spanish or French.  
Caption1/ 2  
SETTING CAPTIONS  
TEXT1: This mode is used to display large  
amounts of text. This text will appear within  
a black box that may be nearly as large as  
the TV screen. Text displayed in this  
manner does not generally relate to the  
program. Captions may be used by broadcast-  
TONIGHT: BECOMING MOSTLY  
CLOUDY WITH A 40 PERCENT  
CHANCE OF RAIN. COLD WITH  
A LOW IN THE UPPER 30's WEST  
WIND AROUND 20 MPH, SHIFT-  
ING TO NORTHWEST AROUND  
MIDNIGHT. FRIDAY: MOSTLY  
CLOUDY AND COLDER WITH  
A 50 PERCENT CHANCE OF  
RAIN. HIGH IN THE MID 50's.  
1. Press the CAPTION key on the remote control.  
2. Press the 0 key on the remote control to select  
options: OFF, CAPTION1, CAPTION2, TEXT1,  
TEXT2, or QUIKCAP.  
Text1/ 2  
ers to provide weather reports, community bulletins, etc.  
I
I
If Caption Text mode is selected and no captioned text is  
Channel number will not display continuously when cap-  
broadcasted, a black box may appear and remain on the TV  
screen as shown.  
tioning is on.  
To remove this black box, set captioning to any  
mode other than Text1 or Text2 or press the  
RESET key to cancel captioning and other cus-  
tomized settings.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
12  
 
V-GUIDE (PARENTAL CONTROL)  
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP  
REGULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN  
OTHER COUNTRIES.  
ABOUT MPAA AND TV PARENTAL GUIDELINES  
ming contains any or all of these conditions, these letters  
become part of the icon that is displayed on the TV screen.  
MPAA and TV Parental Guidelines are rating systems that  
provide advance cautionary information to parents about  
the content of movie and television programming.  
A rating icon will generally appear in the upper left hand  
corner of the TV screen for about fifteen seconds at  
the beginning of a program and should be repeated  
at the beginning of the second hour of a long  
program. It may also appear when returning from  
commercials. There may be other instances when these icons  
will be displayed as well. Parents are encouraged to become  
familiar with these icons and their meanings.  
The V-Guide system contain both age-based and content-  
based settings. This gives parents discretionary ways of  
choosing appropriate material for their children to view.  
Content ratings are represented by the initials D (Sugges-  
tive Dialog), L (Adult Language), S (Sexual Situations), V  
(Violence), and FV (Fantasy Violence). When program-  
V-GUIDE OPERATION  
Use this feature to supervise television viewing for young children. This television can be set to automatically block  
programs with content you deem as inappropriate for your children to view, including: suggestive dialog, adult language,  
sexual situations, violence, and fantasy violence.  
The ability of the television to block the reception of specific programming content depends upon several conditions:  
1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable companies must transmit the  
rating code signal, and 4) The TV must be properly setup to decode the signal.  
SETTING MPAA MOVIE RATING  
1. Press the V-GUIDE key on the remote control to display menu.  
2. Press the + key to switch V-Guide ON.  
X
B
V-GUIDE  
NC17 B  
R  
PG13 U  
PG  
MPAA Movie Ratings  
TV Parental Guidelines  
B
U
U
3. Press the + key again. Then use the L M keys to highlight rating.  
G
4. Press the MENU key to Block (B) or Unblock (U) selected rating.  
(Arrow indicates selection.)  
Press MENU key to BLOCK  
Use LM, – + keys to select  
Press V-GUIDE key to exit  
5. Press the key to return to the V-Guide Options menu.  
I
I
I
Use the CHANNEL L M keys and the VOLUME – +  
keys to navigate through the menus.  
The V-Guide display remains on screen for approximately  
20 seconds. If it disappears, press the V-GUIDE key.  
V-Guide feature is accessible only from the remote  
control.  
(Continued on page 14.)  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
13  
 
SETTING TV PARENTAL GUIDELINES  
10. Press the MENU key to display the Content Option menu.  
6. Use the LM keys to highlight TV Parental Guidelines.  
11. Use the L M keys to highlight a category (D-Sugges-  
tive Dialog, L-Adult Language, S-Sexual Situations,  
V-Violence, FV-Fantasy Violence).  
7. Press the + key. Then use the LM keys to highlight  
rating.  
8. Press the MENU key to Block (B) or Unblock (U)  
selected rating. (Arrow indicates selection.)  
12. Press the + key. Then use the LM keys to highlight  
a rating.  
TVMA B  
TV14  
TVPG B  
TV-G B  
TVY7 U  
V-GUIDE  
13. Press the MENU key to Block (B) or Unblock (U)  
selected rating. (Arrow indicates selection.)  
B
MPAA Movie Ratings  
TV Parental Guidelines  
14. Press the V-GUIDE key to exit; or press the  
key to return to the Content Options menu.  
TV-Y  
Content  
U
15. Repeat steps 11 through 13 to Block (B) or Unblock (U)  
additional content ratings, if desired.  
Press MENU key to BLOCK  
Use LM, – + keys to select  
Press V-GUIDE key to exit  
D-Suggestive Dialog  
L-Adult Language  
SETTING CONTENT-BASED GUIDELINES  
9. Follow steps 6 and 7. Use the LM keys to highlight  
Content.  
TV14  
TVPG  
B
B
S-Sexual Situations  
V-Violence  
FV-Fantasy Violence  
TVMA B  
V-GUIDE  
Press MENU key to BLOCK  
Use LM, – + keys to select  
Press V-GUIDE key to exit  
TV14  
TVPG  
TV-G  
TVY7  
TV-Y  
B
B
B
U
U
MPAA Movie Ratings  
TV Parental Guidelines  
TURNING OFF THE V-GUIDE  
1. Press the V-GUIDE key.  
Content  
2. Use the – + keys to select OFF.  
Press MENU key to set  
Use LM, – + keys to select  
Press V-GUIDE key to exit  
Note: Networks and local stations may or may not  
include the content ratings portion of the TV  
Parental Guidelines.  
I
I
I
The TV will automatically block (B) ratings above or  
unblock (U) ratings below selection. For example, if you  
block rating R, NC17 and X will be blocked as well.  
You can block a content rating such as TVPG-V and still be  
able to watch TVPG programs with ratings of S-L-D pro-  
vided TVPG is unblocked (U).  
I
Blocking TVY7 does not block higher ratings.  
To temporarily unblock or view Blocked (B) programs, set  
V-GUIDE to OFF, or press the RESET key twice to clear all  
Blocked (B) ratings and other customized settings.  
CARE AND CLEANING  
The surface of the cabinet can be damaged if not properly maintained. Many common household  
aerosol sprays, cleaning agents, solvents, and polishes will cause permanent damage to the fine surface.  
1. Unplug the power cord before cleaning the television.  
2. Clean the screen and cabinet with a soft dry cloth.  
Note: Never spray liquids on the screen because it can run down and drip onto the chassis. This may  
cause component failure not covered under Warranty.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
14  
 
HELPFUL HINTS (Problems/Solutions)  
Because of the Quality we build into our product, very few problems are actual TV defects. Most problems only involve  
simple hookup or setup changes that can be solved by the customer. Please check the chart below and try the solutions listed  
for your problem. If the problem still persists, before returning your TV, please visit our website at www.sanyoctv.com or  
call us toll free at 1.800.877.5032. We can Help!  
Problem:  
Check these Conditions:  
Try these Solutions:  
Page No.  
TV turns off  
automatically.  
Check signal (Cable/Ant.) connection.  
Power surge protection feature.  
Press POWER key.  
4
The sleep timer may have been set.  
Unplug TV momentarily.  
No picture, poor  
picture, or wavy  
lines in picture.  
Check antenna connections.  
May be station trouble.  
Brightness or Contrast misadjusted.  
Possible interference from household  
Adjust antenna.  
Try a different channel.  
Select AUTO from Picture/Sound  
on-screen menu or press RESET key.  
4, 11  
appliance.  
Turn off Mixer, Drill, Blender, etc.  
No sound, poor  
sound. No sound  
on some channels.  
May be station trouble.  
Try a different channel.  
Adjust Volume.  
6~9  
MUTE function may be on.  
Check Audio/Video connections.  
Black box on  
screen.  
Caption Text Mode without display  
Press RESET key twice.  
Switch OFF Captions (see page 12).  
12  
11  
information.  
No Cable chan-  
nels above  
Cable Channel Indicator C should appear next  
to channel number.  
Select CABLE from Antenna on-screen menu;  
then start CH. (channel) Search using the menu.  
number 13.  
No Captioning.  
Check if station is broadcasting a Closed-  
Press CAPTION key to select Captioning.  
12  
11  
Caption signal.  
Poor color or  
no color.  
Check if program is in color.  
Check antenna connections.  
Color or Tint misadjusted.  
May be station trouble.  
Try a different channel.  
Adjust antenna.  
Press RESET key to restart channel search.  
Blue Screen with  
Video1, Video2, or  
Component2  
Check Audio/Video connections.  
Check external equipment.  
Check external equipment setting.  
check DVD setting.  
Press INPUT key.  
6 ~ 8  
Switch on external equipment.  
Set external equipment output connections to  
match input connections.  
displayed.  
No TV Stereo or  
SAP sound.  
Check if station is broadcasting a true MTS  
Select STEREO or SAP from Audio on-screen  
menu.  
11  
11  
stereo signal or a SAP signal.  
Cannot select or  
scan some  
channels.  
Channel may be removed from memory.  
Check antenna connections.  
V-Guide is set to block programming.  
Select CH. SCAN MEMORY and manually add  
channels or start CH. (channel) search.  
Set V-GUIDE to OFF or press RESET key to clear  
all setting.  
13 ~ 14  
9 ~ 10  
Remote Control  
will not work TV.  
Check the batteries.  
Check if TV is plugged in.  
Replace batteries.  
Aim remote control at front of TV.  
Menu System  
words seem  
misspelled.  
May be a different language is selected.  
Reselect menu language choice using the on-  
screen menu.  
10  
Cabinet makes  
popping sound.  
This is a normal condition during warm-up and  
cool down of the plastic cabinet parts.  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
15  
 
MEXICO GUARANTEE  
IMPORTADOR:  
DESCRIPTION: Television  
BRAND: SANYO  
COMERCIALIZADORA MEXICO  
AMERICANA, S.DE R.L. DE C.V.  
AV. NEXTENGO No 78  
COL. SANTA CRUZ ACAYUCAN  
DEL. AZCAPOTZALCO, MÉXICO, C.P. 02770  
RFC: CMA9109119L0  
MODEL: DS24425  
GUARANTEE  
THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND  
A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:  
COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.  
UNDER THE FOLLOWING CONDITIONS:  
1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR SUPPLIER  
UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS  
GUARANTEE.  
2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR  
MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILL BE VALID  
AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.  
3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T  
REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE  
THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE COST  
RESPECTIVELY.  
4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT,  
AND THE RESPECTIVE COST OF TRANSPORTATION.  
THIS GUARANTEE WILL BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:  
WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.  
*
*
*
WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.  
WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE  
MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.  
CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,  
COMPONENTES, CONSUMIBLES Y ACCESORIOS:  
STAMP, DATE AND SIGNATURE  
SUCURSAL VALLEJO  
SUCURSAL MINERVA  
o
o
Silos N 135, Col. Minerva  
Poniente 126 N 288 B  
OF  
Col. Nueva Vallejo  
México, D.F.  
Deleg. Iztapalapa  
México, D.F. 09810  
Tels. 5646-4551  
5646-4550  
STORE  
Tels. 5567-5378  
5368-0105, 8589-8033  
DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________  
CLIENT’S NAME: __________________________________________________________________________________  
ADDRESS: ______________________________________________________________________________________  
EXTERIOR NUMBER: _______________________ INTERIOR NUMBER: _______________________  
SUB DIVISION: ____________________________________________ STATE/DELEGATION: _______________________  
TELEPHONE: _____________________________________________  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
16  
 
UNITED STATES AND CANADA WARRANTY  
ONE-YEAR LIMITED WARRANTY  
THIS LIMITED WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE  
UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING THE UNITED STATES’ OTHER  
TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL PUR-  
CHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.  
FOR ONE YEAR from the date of purchase, Sanyo Manufacturing Corporation will replace any defective TV.  
To insure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return the  
defective TV to the retailer along with the receipt and the included accessories, such as the remote  
control. The defective TV will be exchanged for the same model, or a replacement model of equal value,  
if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo  
Manufacturing Corporation.  
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
OBLIGATIONS  
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from  
defects in material and workmanship under normal use and conditions. Should replacement be necessary under  
this warranty for any reason due to manufacturing defect or malfunction during the first year from date of origi-  
nal purchase, Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.  
For customer assistance, whether during or out of the warranty period, call toll free 1-800-877-5032.  
Weekdays 7:30 AM – 7:00 PM Central Time  
Saturday 7:30 AM – 4:00 PM Central Time  
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which  
vary from state to state.  
(EFFECTIVE: August 1, 2002)  
For your protection in the event of theft or loss of this product, please fill in the information requested  
below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.  
Model No.______________________________ Date of Purchase _________________________  
Serial No.______________________________ Purchase Price___________________________  
(Located on back of unit)  
Where Purchased_________________________  
AS  
Sanyo Manufacturing Corp.  
3333 Sanyo Road, Forrest City, AR 72335  
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032  
17  
 

Quadra Fire Patio Heater 839 1390 User Guide
RCA Marine GPS System RS2058 User Guide
RCA MP3 Player M45 series User Guide
Ricoh Projector PJ WX3131 User Guide
Rikaline GPS Receiver GPS 6020 User Guide
Samsung Home Theater Screen HT F6500W User Guide
Samsung Washer S621 User Guide
Sanyo Air Conditioner 30K72R User Guide
Sanyo Battery Charger ML414R User Guide
Sanyo Vacuum Cleaner SC X90 User Guide