Sanus Systems Indoor Furnishings VMCT User Guide

Assembly Instructions for Model: VMCT  
Thank you for choosing a Sanus Systems VMCT. This product is designed to work with other products to easily and safetly  
contain and hide component cables, power cords, and wires.  
If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified  
you with installation questions and missing or damaged parts. Replacement parts for products purchased through authorized  
dealers will be shipped directly to you. Check carefully to make sure that there are no missing or defective parts. Sanus  
Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please  
call Sanus Systems before returning products to the point of purchase.  
NOTE:  
The supplied wall mounting hardware is not for metal stud, concrete, brick, or block walls. If you are uncertain  
about the nature of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary  
mounting hardware is included. If the hardware you need is not included please consult your local hardware  
store or call Sanus Systems.  
Required Tools: Drill, 3/16” drill bit, 3/8” drill bit, and a philips screw driver  
Supplied Parts and Hardware: (Threaded fasteners are shown actual size.)  
Cover - B  
Qty. 2  
Wall Plate - A  
Qty. 2  
Wood Screw - C  
Qty. 4  
Anchor - D  
Qty. 4  
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 07.12.06 (6901-100078)  
 

Q See Cell Phone QH32DVR4C User Guide
Q See Digital Camera QD113P User Guide
Remington Chainsaw RM1632A User Guide
Ricoh Printer C830DN User Guide
Rolls Mixer MX56C User Guide
Rotel Universal Remote RR 1050 User Guide
Ryobi Saw BS1001SV User Guide
Sanyo Refrigerator MPR 715F User Guide
SATO Printer CL408 412 User Guide
Schneider Electric Water Dispenser ACRC500 User Guide