Samsung Security Camera Samsung SmartCam WiFi Home Security Camera User Guide

General setting  
3) Check to agree to the terms and conditions,  
and then tap <Next>.  
2-4. VIEWING LIVE VIDEO  
5) Create the <Camera password> and  
<Camera Name>, and then tap <Add>.  
1.  
CONNECTING THE CAMERA TO YOUR ROUTER  
1) Tap <General setting>.  
1) Tap on the camera icon [ ] to view live  
Create camera password using alphanumeric  
characters between 1 to 8 without any space.  
Example : q1  
video.  
4) Enter the required information and Tap  
SNH-1010N English  
Quick Start  
Guide  
1) Connect the power adapter to the camera.  
2) Configure the basic camera settings.  
Tap on the arrow icon [ ] for camera  
options.  
<Register>.  
Camera Name : Camera name is used to easily  
identify the camera when you have more than one.  
i.e., Living room, Kitchen, Bedroom.  
ID : Create user ID using letters, numbers and  
periods between 8-14 characters.  
6) Tap <Go To Camera List>.  
2) Connect the network cable to  
the camera and your network  
router.  
PW : Create password using letters and numbers  
except colons and commas between 8-14  
characters.  
If there is a camera to register additionally, tap  
Event Alarm : Specify whether to trigger the alarm  
or not, and specify the sensitivity.  
The higher the sensitivity is, the subtler motion/  
audio events will be detected.  
<Register new camera>.  
2) Enter the <Camera password> for the  
camera selected. This is the same camera  
password you created at the time you  
registered the camera.  
Thank you for purchasing the Samsung  
SmartCam WiFi Home Security Camera.  
Follow the simple steps in this guide  
to set up and start using your new  
SmartCam.  
Confirm Password : Checks whether your password is entered correctly.  
Name : Enter your name.  
Connect one end of the enclosed network cable to your camera and the  
other to an open port on your router. Once setup is compete, you will no  
longer need the network cable and the camera will connect to your WiFi  
network.  
2-3. CONNECTING CAMERA TO WI-FI NETWORK  
Night Vision : Set the IR lighting.  
Check <Night Vision> to set the camera to switch to the night vision  
mode automatically.  
E-mail : Email address is used to recover your account password.  
Check the <SAVE> option to save the  
camera password. Within 20 seconds, it will  
start streaming.  
1) From the camera list, tap on the [ ] for  
cameraoptions.  
Audio : Adjust the volume of the built-in microphone and speaker of the  
camera as appropriate.  
If you have any questions or need help  
installing your new product please contact  
our free technical support.  
3) The camera bootup will take about 1  
minute then the camera status LED  
will change from red to white.  
2-2. ADDING YOUR CAMERA  
2) Tap on <Setup> icon.  
Video loading time will vary depending on your  
internet connection.  
3) Configure the notification.  
1) Log-in.  
Telephone : 1-877-349-3149  
3) Enter the camera password you created for  
J If your WiFi router supports WPS feature, refer to the user manual to connect  
Push Notification : Check to receive push notification  
to your phone.  
9am - 9pm EST, Monday - Friday  
this camera and Tap <OK>.  
via WPS button.  
Related manual can be downloaded from  
The SmartCam webpage and mobile menu may be subject to change  
without prior notice.  
2) Tap <Add Camera>.  
YouTube : Tap [ ] to enter your YouTube account  
information to upload 30 video clips to your YouTube  
account when event is detected.  
4) Tap the <Network setting>.  
3) Select the camera found and tap <next>.  
PHONE  
2-1. SETTING UP YOUR ACCOUNT FROM MOBILE  
When your smartphone is connected to the same  
5) Turn WiFi on.  
XXXXXXXXXXXXXXX  
Picasa : Tap [ ] to enter your Picasa account  
information to upload a picture to your Picasa  
account when event is detected.  
WiFi network as the camera, it will automatically  
search for the camera.  
Download the Samsung Smartcam App on to your  
UNPACKING  
2-5. CAMERA SETUP  
Android phone or your iPhone.  
6) Select your WiFi network and enter your WiFi  
network password.  
Make sure all following items are in the packaging:  
Search keywords for the application: “Samsung  
SmartCam”, “Smartcam”, “SAMSUNG TECHWIN”,  
TECHWIN”.  
Tap the <Setup> icon to  
configure a camera to be  
monitored.  
4) Tap <Apply>.  
Other WiFi Networks : Enter the SSID name and  
password to connect to the network.  
Time setting  
1) Run the downloaded application.  
7) Tap <OK> and unplug the network cable from the camera and  
the router.  
1) Tap <Time setting>.  
2) Tap <Sign up here>.  
Double Sided  
Tape  
Warranty Card /  
GPL License  
Camera  
Adapter  
Network Cable  
Bracket  
Quick Guide X3  
The WiFi status LED will become steady white once the camera is  
connected to the Wireless Access Point. (may take up to 30sec).  
You can now unplug and place the camera anywhere within your wireless  
network range. If the camera LED did not turn solid white, please contact  
our tech support at 1-877-349-3149.  
4) If the camera is not  
detected, please enter  
the camera serial  
2) Set the cameras clock.  
J Please keep the packaging  
Time Zone : Select your region.  
number manually.  
You will need the serial number that on the side of the  
packaging to register the camera.  
Summer Time : Check this option if you live in a  
country or region where DST(Daylight Saving Time)  
is applied.  
Tap on [ ] for more  
information.  
8) Tap <Back> and select <Live> to see the video.  
PT01-001489A  
 

RAD Data comm Network Card IPmux 11 User Guide
Radio Shack Cassette Player 14 1132 User Guide
Radio Shack Cordless Telephone ET 905 User Guide
Radio Shack Headphones 12 928 User Guide
RCA Home Theater System RT151 User Guide
RCA MP3 Player MC5102 MC5104 User Guide
Rosewill Network Card RC304 E User Guide
Samsung Blu ray Player BDF5900 User Guide
Samsung CRT Television CL21M21MQ User Guide
Sanyo DVR SRT 600P User Guide