Samsung Digital Camera C4203P User Guide

220X POWER ZOOM CAMERA  
SCC-C4201(P), C4203(P),  
C4301(P), C4303(P)  
E
D
F
Owner’s Instructions  
Gebrauchsanleitung  
Guide d’utilisation  
Guía del usuario  
Istruzioni per l’uso  
Es  
I
220x P  
o
w
er Zoom  
LO  
W LIGHT  
C
D
IG  
IT  
A
L
O
LO  
R
C
A
M
ER  
A
Part : AB68-00366A  
Printed in Korea  
Be sure to read the "Safety Precautions" in this manual  
to ensure correct use and operation of this product.  
 
Contents  
Cautions  
1. Overview.............................................................5  
2. Part Names and Functions ...............................6  
3. Installation........................................................ 8  
1. Do not drop objects on the product or apply strong  
shock to it. Keep away from a location subject to  
excessive vibration or magnetic interference.  
Checking the Package Contents ....................... 8  
Preparing the Cables ........................................ 9  
Connecting the Cables .................................... 10  
2. Do not install in a location subject to high  
temperature, low temperature, or high humidity.  
(Doing so may cause fire or electrical shock.)  
E
4. Navigating the Setup Menu........................... 12  
3. Avoid a location which is exposed to direct sunlight,  
or near heat sources such as heaters or radiators.  
(Neglecting to do so may result in a risk of fire.)  
Structure of the Setup Menu ........................... 12  
- CAMERA ID................................................... 16  
- IRIS................................................................ 17  
- BLC................................................................ 17  
- ALC ............................................................... 17  
- MANU............................................................ 18  
- SHUTTER...................................................... 19  
- AGC (MOTION)............................................. 20  
- WHITE BAL ................................................... 21  
- SPECIAL ....................................................... 22  
- AUTO FOCUS............................................... 24  
- MOTION DET................................................ 24  
- PRESET ........................................................ 25  
- COLOR/ BW.................................................. 26  
- EXIT............................................................... 28  
4. If you want to relocate the already installed product,  
be sure to turn off the power before moving or  
reinstalling it.  
5. Install in a well-ventilated location.  
6. Remove the power plug from the outlet when there  
is a lightning storm. (Neglecting to do so may cause  
fire or damage to the product.)  
5. Specifications ............................................... 29  
6. Others ............................................................ 33  
3
4
 
Overview  
1
Part Names and Functions  
2
This camera is a high performance surveillance camera that  
provides a maximum of 220x zoom surveillance capability  
with its 22x optical zoom lens and digital zoom IC.  
It is a multifunction camera that is equipped with all of the  
key features of the existing surveillance cameras :  
G
Day & Night function (SCC-C4203(P), C4303(P)) that  
ensures sharp and clear images even at night.  
E
220x Power Zoom  
LOW LIGHT  
DIGITAL COLOR CAMERA  
G
Low - Light Surveillance function that enables image  
capture even under extremely low light conditions.  
SET-UP button  
G
White Balance function that provides accurate color  
rendition under any light conditions.  
G
BLC function that enables effective back light  
compensation even under a spotlight or a very bright  
incident light.  
Instead of “POWER”, “DC IN”  
is writtern in  
SCC-C4201(P)/4203(P).  
Instead of “POWER”, “PWR  
IN” and instead of “GND”,  
“DC12&AC24V” is writtern in  
SCC-C4301(P)/4303(P).  
G
Auto Focus function that automatically tracks and focuses  
on the moving subject.  
REMOTE  
RS-485  
POWER  
G
RS485/ Wired remote control function.  
Broadcast System  
G
SCC-C4201/ C4203/ C4301/ C4303 : NTSC System  
SCC-C4201P/ C4203P/ C4301P/ C4303P : PAL System  
SET-UP button  
G
The function of the SET-UP button varies depending on  
whether you are currently in Normal Operation mode (i.e.,  
the Setup Menu is not displayed) or Setup Menu mode.  
Power System/Power Consumption  
G
SCC-C4201(P), C4203(P) : DC 12V/5.0W  
G
SCC-C4301(P), C4303(P) : AC 24V, DC 12V/5.5W  
In Normal Operation Mode  
- UP/ DOWN buttons : Use as the ZOOM Tele button  
and the ZOOM Wide button respectively.  
- LEFT/ RIGHT buttons : Use as the FOCUS Near  
button and the FOCUS Far button respectively.  
- SET- UP button: Use to enter the Setup Menu.  
Hold the SET- UP button for longer than 3 seconds to  
enter the Setup Menu.  
5
6
 
In Setup Menu Mode  
Installation  
3
- UP/ DOWN buttons: Use to move the cursor up or down.  
- LEFT/ RIGHT buttons: Use to move the cursor left or  
right, or to sequentially view the values that can be  
assigned to a parameter.  
Before Installation  
- ENTER button: Use to select a Sub Menu item, and to  
accept the current value.  
Checking the Package Contents  
Make sure that the following accessories are included in  
the package.  
ZOOM/ FOCUS REMOTE terminals  
E
Use to control ZOOM/ FOCUS from an external controller.  
Depending on the input conditions, the terminals can be  
set to 4 different modes.  
(Operating Voltage Range : +3V ~+13V, -3V~-13V)  
Near  
-6V  
+6V  
-6V  
Item  
Tele  
-6V  
-6V  
+6V  
+6V  
Wide  
+6V  
+6V  
-6V  
Code  
Far  
+6V  
-6V  
+6V  
-6V  
A
B
220x  
DIGIT  
P
C
D
o
wer Zoom  
LO  
W
LIGHT  
AL COLOR CAMERA  
+6V  
-6V  
Caution : In the event of a simultaneous input of RS485 and  
wired remote control signal, whichever was input first  
will be activated.  
SCC-C4201(P),C4203(P),  
C4301(P),C4303(P)  
User's Guide  
(For a camera with the ROM version 1.2 or above,  
please refer to page 33.)  
ALARM OUT terminal  
An alarm signal is output from this terminal when the  
MOTION DET mode is activated or BW mode is activated.  
(Open Collector DC24V 40mA Max)  
:
VIDEO OUT terminal  
Connect the monitor's VIDEO IN. The video signal from  
the camera is transmitted to the monitor via this terminal.  
Mount Adapter  
Screw (2)  
Terminal Block  
RS485 terminal  
RS485 remote control terminal.  
Power LED  
Lights when power is on.  
POWER IN terminal  
Plug in the power adapter here.  
7
8
 
Preparing the Cables  
Connecting the Cables  
To install and use the camera, first prepare the following  
cables.  
1. Connect one end of the BNC cable to the VIDEO OUT.  
2. Connect the other end of the BNC cable to the VIDEO IN  
of the monitor.  
The requirements for the power adapter, which connects to  
the camera's POWER IN terminal, are as follows:  
G
SCC-C4201(P), SCC-C4203(P) : DC12V 600mA  
SCC-C4301(P), SCC-C4303(P) : AC24V 300mA  
G
E
DC12V 600mA  
Video terminals on the back  
of the monitor  
BNC cable  
REMOTE  
RS-485  
POWER  
3. Plug in the power adapter. Use a "minus" screwdriver to  
connect one part of the power adapter, which consists of two  
lines, to the POWER terminal of the camera as follows :  
Video Cable  
Use a BNC cable, such as the one shown below, to connect  
the camera's VIDEO OUT to the monitor.  
POWER SELECTION switch  
underneath the power adapte  
POWER SELECTION  
REMOTE  
RS-485  
POWER  
switch underneath the  
power adapte  
9
10  
 
Navigating the Setup Menu  
4
4. Determine the type of power supply and set the POWER  
SELECTION switch accordingly. Next, plug the power  
adapter into a wall outlet.  
In this chapter, we will take a look at the menu system of the  
SCC-C4201(P), C4203(P), C4301(P), and C4303(P). First,  
we will take a look at the structure of the Setup Menu and  
then describe the functions of each menu item in the menu.  
The requirements for the power adapter for each model are  
as follows:  
Structure of the Setup Menu  
G
SCC-C4201(P), SCC-C4203(P) : DC12V 600mA  
SCC-C4301(P), SCC-C4303(P) : AC24V 300mA  
E
G
G
Structure of the Setup Menu of the SCC-C4201(P)  
DC12V 600mA  
CAMERA ID  
IRIS  
OFF/ON...  
5. If the camera operates normally, the following screen will  
be displayed for 5 seconds and then disappears.  
ALC.../MANU...  
OFF/1/100(1/120) ~ 1/10K  
/AUTO X2~X128/FIX X2~X128  
SHUTTER  
SAMSUNG PROTOCOL  
ADDR : 0  
TYPE : RS-485, HALF  
BAUD : 9600  
AGC  
OFF/LOW/HIGH  
S.S/SLOW/NORMAL/FAST/F.F  
ATW/AWC/MANU...  
...  
MOTION  
WHITE BAL  
SPECIAL  
LENS CHECK : OK!  
LANGUAGE  
CTRL TYPE  
RS-485  
ENGLISH  
A/B/C/D  
...  
6. The requirements for RS485 control is as follows :  
G
Signaling Speed: 9600 bps  
PIP  
OFF/ON...  
OFF/ON  
OFF/X2 ~ X10  
+/-  
G
Data Bit : 8 bits  
MIRROR  
G
Stop Bit : 1 bit  
D-ZOOM  
G
Parity Bit : none  
POSI/NEGA  
ZOOM SPEED  
1/2/3/4  
----I----  
DETAIL(0)  
RET  
AUTO FOCUS  
MOTION DET  
PRESET  
AF/MF/ONEAF  
OFF/ON...  
...  
EXIT  
QUIT/SAVE/PRESET  
11  
12  
 
Structure of the Setup Menu  
G
G
Structure of the Setup Menu of the SCC-C4301(P)  
Structure of the Setup Menu of the SCC-C4203(P)  
CAMERA ID  
IRIS  
OFF/ON...  
CAMERA ID  
IRIS  
OFF/ON...  
ALC.../MANU...  
ALC.../MANU...  
OFF/1/100(1/120) ~ 1/10K  
/AUTO X2~X128/FIX X2~X128  
OFF/1/100(1/120) ~ 1/10K  
/AUTO X2~X128/FIX X2~X128  
SHUTTER  
SHUTTER  
E
AGC  
OFF/LOW/HIGH  
S.S/SLOW/NORMAL/FAST/F.F  
ATW/AWC/MANU...  
...  
AGC  
OFF/LOW/HIGH  
S.S/SLOW/NORMAL/FAST/F.F  
ATW/AWC/MANU...  
...  
MOTION  
WHITE BAL  
SPECIAL  
MOTION  
WHITE BAL  
SPECIAL  
LANGUAGE  
CTRL TYPE  
RS-485  
ENGLISH  
LANGUAGE  
ENGLISH  
A/B/C/D  
...  
V-SYNC  
INT/LINE...  
A/B/C/D  
...  
CTRL TYPE  
RS-485  
PIP  
OFF/ON...  
OFF/ON  
OFF/X2 ~ X10  
+/-  
MIRROR  
D-ZOOM  
POSI/NEGA  
ZOOM SPEED  
DETAIL(0)  
RET  
PIP  
OFF/ON...  
OFF/ON  
OFF/X2 ~ X10  
+/-  
MIRROR  
D-ZOOM  
POSI/NEGA  
ZOOM SPEED  
DETAIL(0)  
RET  
1/2/3/4  
----I----  
1/2/3/4  
----I----  
AUTO FOCUS  
MOTION DET  
PRESET  
AF/MF/ONEAF  
OFF/ON...  
AUTO FOCUS  
MOTION DET  
PRESET  
AF/MF/ONEAF  
...  
OFF/ON...  
COLOR/BW  
EXIT  
COLOR/BW/AUTO...  
QUIT/SAVE/PRESET  
...  
EXIT  
QUIT/SAVE/PRESET  
13  
14  
 
(SET UP)  
(SET UP)  
CAMERA ID  
IRIS  
SHUTTER  
AGC  
Structure of the Setup Menu  
CAMERA ID  
OFF  
OFF  
ALC...  
OFF  
LOW  
ATW  
...  
IRIS  
SHUTTER  
AGC  
ALC...  
OFF  
LOW  
ATW  
...  
ONEAF  
OFF  
G
Structure of the Setup Menu of the SCC-C4303(P)  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
COLOR/BW  
EXIT  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
ONEAF  
OFF  
...  
CAMERA ID  
IRIS  
OFF/ON...  
...  
COLOR  
QUIT  
EXIT  
QUIT  
ALC.../MANU...  
OFF/1/100(1/120) ~ 1/10K  
/AUTO X2~X128/FIX X2~X128  
[SCC-C4201(P),SCC-C4301(P)]  
[SCC-C4203(P),SCC-C4303(P)]  
SHUTTER  
E
AGC  
OFF/LOW/HIGH  
S.S/SLOW/NORMAL/FAST/F.F  
ATW/AWC/MANU...  
...  
The COLOR/BW option is available only with the  
SCC-C4203(P) and C4303(P).  
MOTION  
WHITE BAL  
SPECIAL  
CAMERA ID  
LANGUAGE  
V-SYNC  
ENGLISH  
In the CAMERA ID menu, you can assign an ID to the camera  
that appears on the monitor screen. If you select ON...  
for CAMERA ID and press the ENTER button, a screen from  
which you can assign a camera ID will appear.  
INT/LINE...  
A/B/C/D  
...  
CTRL TYPE  
RS-485  
You can use alphanumeric characters and a few special  
characters that are displayed on the screen to assign a  
maximum of 20 characters for the CAMERA ID.  
You can use the LOCATION option to place the camera ID  
anywhere on the screen.  
PIP  
OFF/ON...  
OFF/ON  
OFF/X2 ~ X10  
+/-  
MIRROR  
D-ZOOM  
POSI/NEGA  
ZOOM SPEED  
DETAIL(0)  
RET  
1/2/3/4  
----I----  
(SET UP)  
(CAMERA ID)  
CAMERA ID  
IRIS  
ON...  
ALC...  
OFF  
A B C D E F G H  
M N O P Q R S T U V W X  
I
J
K
L
SHUTTER  
AGC  
LOW  
ATW  
...  
ONEAF  
OFF  
Y Z  
:
0
!
1
-
2
+
3
*
4
(
5
)
6
/
7
8
9
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
AUTO FOCUS  
MOTION DET  
PRESET  
AF/MF/ONEAF  
Press the  
ENTER  
button.  
SP  
SP  
LOCATION...  
RET  
OFF/ON...  
...  
...  
COLOR/BW  
EXIT  
COLOR  
QUIT  
ZOOM.CAMERA.........  
COLOR/BW  
EXIT  
COLOR/BW/AUTO...  
QUIT/SAVE/PRESET  
15  
16  
 
If you set the AREA option to USER and press the ENTER  
button, you can customize the area to which the BLC function  
will be applied. You can specify the size of the area by using  
the UP, DOWN, LEFT, and RIGHT buttons. After setting the  
size of the area, press the ENTER button. The specified area  
will start flashing. Then, you can use the UP, DOWN, LEFT  
and RIGHT buttons to specify the location of the area.  
Use the ENTER button and the UP, DOWN, LEFT and  
RIGHT buttons to specify the size of the area and to position  
the area. Press the ENTER button again to exit the AREA  
setting menu.  
IRIS  
The level of video output to the monitor can be controlled by  
the iris lens according to the intensity of the incoming light.  
This product is equipped with an iris lens. In the ALC (Auto  
Light Compensation) menu, you can set the video output  
level. In the MANU menu, you can manually set the opening  
and closing of the iris.  
BLC (Option in the ALC Menu)  
E
If you use an ordinary camera when a strong light source,  
such as a spot light, is shining from behind the subject, the  
subject will appear dark on the monitor because of the back  
light. For the SCC-C4201(P), C4203(P), C4301(P), and  
C4303(P), appropriately set the BLC in the ALC menu to  
solve the back -light problem and have a clear picture even  
under a spotlight or a very bright incident light.  
SIZE  
SIZE  
Use the UP,  
DOWN,  
©
©
LEFT, and  
RIGHT  
buttons.  
ALC  
POSITION  
POSITION  
If you select ALC for IRIS and press the ENTER button, a  
screen from which you can set the video output level and BLC  
will appear. In the LEVEL option, you can use the LEFT/  
RIGHT buttons to set the video output level. If you set the  
BLC to ON, the BLC function will be applied to the screen  
area specified in the AREA option. The AREA option can be  
set to either PRESET or USER to specify the screen area to  
which the BLC function will be applied. If you set the AREA  
option to PRESET, the BLC function will be applied to the  
area specified at the time of factory shipment.  
MANU  
If you select MANU for IRIS and press the ENTER button, a  
screen from which you can manually adjust the iris to a  
desired level will appear. In the LEVEL option, you can use  
the LEFT/ RIGHT buttons to set the manual opening and  
closing of the iris.  
(SET UP)  
(MANUAL)  
CAMERA ID  
IRIS  
SHUTTER  
AGC  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
OFF  
(SET UP)  
(ALC)  
MANU...  
OFF  
LOW  
ATW  
...  
ONEAF  
OFF  
...  
CAMERA ID  
IRIS  
OFF  
ALC...  
OFF  
SHUTTER  
AGC  
LOW  
ATW  
...  
ONEAF  
OFF  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
Press the  
ENTER  
button.  
Press the  
ENTER  
button.  
AREA  
BLC  
LEVEL  
RET  
PRESET...  
OFF  
( 0) ----I----  
LEVEL ( 00) ----I----  
RET  
COLOR/BW  
EXIT  
COLOR  
QUIT  
...  
COLOR/BW  
EXIT  
COLOR  
QUIT  
17  
18  
 
SHUTTER  
AGC (MOTION)  
In the AGC (Automatic Gain Control) option, you can specify  
whether to automatically control the GAIN when the obtained  
video is below a certain level of brightness because it was  
recorded under insufficient lighting. To automatically control  
the GAIN, set the AGC option to LOW or HIGH. Otherwise,  
set it to OFF. If the you set the AGC option to LOW, the  
maximum GAIN of the AGC will be set to low, and if set to  
HIGH, the maximum GAIN will be set to high.  
In the SHUTTER option, you can specify the speeds of the  
high-speed electronic shutter, auto low-speed shutter, and fix  
low-speed shutter. The high - speed electronic shutter  
supports 7 shutter speeds from 1/100 seconds to 1/10K  
seconds, and the auto low-speed shutter and fix low-speed  
shutter support 12 shutter speeds from 2x to 128x  
respectively. The low-speed shutter allows you to set the  
shutter speed to a slow setting to obtain a clearer video  
when shooting in dark lighting conditions. Select an auto  
low -speed shutter in order to have the camera detect the  
amount of light and automatically set the shutter speed to a  
slow setting according to the degree of darkness. Select an  
item that starts with "FIX" to specify the shutter speed  
yourself. The numbers that immediately follow the "AUTO"  
and "FIX" indicate the number of accumulated fields.  
The higher the field number, the slower the shutter speed.  
Accordingly, a still picture will be sharper. In the case of  
video, an image captured of an object will be blurry.  
If the SHUTTER option is set to an auto low-speed, the AGC  
option will change to the MOTION option. In the MOTION  
option, use the LEFT and RIGHT buttons to select from S.S,  
SLOW, NORMAL, FAST, and F.F.  
E
(SET UP)  
CAMERA ID  
IRIS  
SHUTTER  
MOTION  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
OFF  
ALC...  
AUTOX4  
NORMAL  
ATW  
...  
ONEAF  
OFF  
...  
COLOR/BW  
EXIT  
COLOR  
QUIT  
(SET UP)  
S.S : Select to maximally enhance the resolution of a still  
image by increasing the lowest value of AGC GAIN and  
the scale of low speed shutter to their maximum.  
(This is used mainly to monitor almost still objects in dark  
places.)  
SLOW : Select to enhance the resolution of a still image  
as much as possible by increasing a low value of AGC  
GAIN and the scale of low speed shutter. (This is used  
mainly to monitor objects that make a small movement in  
dark places.)  
CAMERA ID  
IRIS  
OFF  
ALC...  
OFF  
SHUTTER  
AGC  
LOW  
ATW  
...  
ONEAF  
OFF  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
...  
COLOR/BW  
EXIT  
COLOR  
QUIT  
NORMAL : Select to display the normal picture with a  
medium value of AGC GAIN and the scale of normal  
speed shutter. (This is used mainly to monitor moving  
objects in dark places.)  
FAST : Select to focus on the moving objects by  
decreasing a high value of AGC GAIN and the scale of  
normal speed shutter. (This is used mainly to monitor  
objects showing active movements in dark places.)  
SHUTTER  
©OFF © 1/100(1/120) © 1/250 © 1/500 © 1/1000 © 1/2000 ©  
1/4000 © 1/10K © OFF © AUTOX2 © AUTOX4 © AUTOX6 ©  
AUTOX8 © AUTOX12 © AUTOX16 © AUTOX24 © AUTOX32  
© AUTOX48 © AUTOX64 © AUTOX96 © AUTOX128 © OFF  
© FIXX2 © FIXX4 © FIXX6 © FIXX8 © FIXX12 © FIXX16 ©  
FIXX24 © FIXX32 © FIXX48 © FIXX64 © FIXX96 © FIXX128  
F.F : Select to focus on the moving objects by  
decreasing the highest value of AGC GAIN and the scale  
of low speed shutter to their minimum. (This is used  
mainly to monitor fast moving objects in dark places.)  
19  
20  
 
WHITE BAL  
SPECIAL  
You can manually adjust the LANGUAGE, V-SYNC, CTRL TYPE,  
RS485, PIP, MIRROR, D-ZOOM, POSI/ NEGA, ZOOM SPEED,  
and DETAIL.  
In the WHITE BAL option, you can set the White Balance  
function, which enables you to see the white color correctly  
under illumination of any color temperature. If you set the  
WHITE BAL option to ATW, the camera will continuously  
monitor changes in the ambient color temperature and  
automatically set the White Balance according to the color  
temperature. If you set the WHITE BAL option to AWC, place  
a piece of white paper in front of the camera, and press the  
ENTER button, the Auto White Balance Control will be  
activated just once to set the color temperature and this  
value will be maintained.  
The V-SYNC option is available only with the SCC-C4301(P)  
and C4303(P).  
If you press the ENTER button while in "---" is shown, the  
SPECIAL screen from which you can set the special functions  
will appear. When activating each function, use the LEFT and  
RIGHT buttons to set the desired item.  
E
(SET UP)  
CAMERA ID  
IRIS  
SHUTTER  
AGC  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
COLOR/BW  
EXIT  
(SPECIAL)  
LANGUAGE  
V-SYNC  
CTRL TYPE  
RS-485  
OFF  
ALC...  
OFF  
LOW  
ATW  
...  
ONEAF  
OFF  
ENGLISH  
INT  
A
If you set the WHITE BAL option to MANUAL, you can  
customize the white balance to take into account the current  
lighting condition.  
...  
PIP  
OFF  
OFF  
OFF  
+
MIRROR  
D-ZOOM  
POSI/NEGA  
ZOOM SPEED  
DETAIL  
Press the  
ENTER  
button.  
3200°K : Select to set the color temperature to 3200°K.  
...  
3
COLOR  
QUIT  
(0) ----I--  
RET  
5600°K : Select to set the color temperature to 5600°K.  
USER : Select to set the color temperature by selecting  
V - SYNC : Specify the vertical synchronization method that  
appropriate values from the RED and BLUE  
graphs.  
will be used by the SCC-C4301(P) and C4303(P).  
There are 2 types of vertical synchronization signal that the  
camera supports : INT mode in which the signal is generated  
by the camera's internal clock and LINE mode which sets the  
vertical synchronization by the external power frequency. If  
you select LINE and press ENTER button, the LL-PHASE  
screen from which you can adjust the phase of LINE LOCK  
will appear. You can specify the desired phase level in the  
PHASE option.  
MANU : If you select the MANU option and press the  
ENTER button, a screen from which you can manually select  
the white balance will appear. In the PRESET option, use the  
LEFT and RIGHT buttons to select 3200°K, 5600°K, or  
USER.  
(SET UP)  
(AWB/MANU)  
(SPECIAL)  
(LL-PHASE)  
CAMERA ID  
IRIS  
OFF  
ALC...  
OFF  
LANGUAGE  
V-SYNC  
CTRL TYPE  
RS-485  
ENGLISH  
LINE...  
A
SHUTTER  
AGC  
LOW  
MANU...  
...  
ONEAF  
OFF  
...  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
PIP  
OFF  
OFF  
OFF  
+
MIRROR  
D-ZOOM  
POSI/NEGA  
ZOOM SPEED  
DETAIL  
Press the  
ENTER  
button.  
Press the  
ENTER  
button.  
PRESET OFF(USER)..  
RED  
BLUE  
RET  
(-2C) ---I----  
(-5B) -I------  
...  
3
COLOR/BW  
EXIT  
COLOR  
QUIT  
PHASE (0)  
RET  
----|----  
(0) ----I--  
RET  
If you are using DC power supply, it will work only in INT mode.  
For LINE mode operation, use the AC power adapter (50Hz).  
21  
22  
 
CTRL TYPE : You can select the A, B, C, or D mode  
depending on the input of the wired remote control terminal.  
(See page 7.)  
AUTO FOCUS  
In the AUTO FOCUS option, you can specify the Focus  
method to AF, MF, or ONEAF.  
RS-485 : It sets up ADDRESS, PROTOCOL, and BAUD  
RATE of RS-485 communication.  
(BAUD RATE: 2400bps, 4800bps, 9600bps, 19200bps, 38400bps)  
AF : Focuses automatically by continuously monitoring the  
screen in AUTO FOCUS mode. It does not process the  
FOCUS button input because it focuses automatically  
during ZOOM.  
Caution : A communication error may occur if you connect  
more than one camera set with an identical address.  
MF : You can manually adjust  
the focus.  
(SET UP)  
CAMERA ID  
IRIS  
OFF  
ALC...  
OFF  
LOW  
ATW  
...  
AF  
OFF  
...  
E
PIP : This is the Picture in Picture feature. It will show a  
SHUTTER  
AGC  
ONEAF : Focuses about 5  
seconds only when ZOOM is  
moved Wide to Tele. It is same  
as MF mode while in STOP  
mode, and same as AF mode  
after ZOOM Tele.  
screen reduced by 1/16 of the main screen only when  
operating the Digital Zoom. If you set the PIP option to ON  
and press the ENTER button, you can use the UP, DOWN,  
LEFT, and RIGHT buttons to set the PIP position.  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
COLOR/BW  
EXIT  
COLOR  
QUIT  
* The PIP feature does not work in a low speed shutter mode.  
The MIRROR feature does not work on the PIP window  
.
(SPECIAL)  
EANGUAGE  
V-SYNC  
CTRL TYPE  
RS-485  
ENGLISH  
LINE...  
A
MOTION DET  
In the MOTION DET option, you can set the Motion  
Detection function, motion detection sensitivity, and the  
motion detection area. If you set the Motion Detection  
function, you can detect an intruder's movement and check it  
through the monitor and the ALARM OUT terminal.  
...  
PIP  
ON  
OFF  
OFF  
+
PIP  
MIRROR  
D-ZOOM  
POSI/NEGA  
ZOOM SPEED  
DETAIL  
Press the  
ENTER  
button.  
3
(0) ----I--  
RET  
If you set ALARM which is located under COLOR/BW  
AUTO menu to ON while MOTION DET remains ON, the  
ALARM output port can not send any motion.  
MIRROR : Horizontally flips the video output signal.  
D-ZOOM : Sets the magnification of the Digital Zoom.  
The magnification level can be set to up to 10x.  
POSI/ NEGA : Outputs the video output signal normally or  
inversely.  
ZOOM SPEED : In the ZOOM SPEED option, use the  
LEFT and RIGHT buttons to set the speed as follows:  
(SET UP)  
(MOTION DET)  
CAMERA ID  
OFF  
IRIS  
SHUTTER  
AGC  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
COLOR/BW  
EXIT  
ALC...  
OFF  
LOW  
ATW  
...  
ONEAF  
ON...  
...  
COLOR  
QUIT  
1 : Takes about 17 seconds from 1 x to 22 x magnification (slowest speed).  
2 : Takes about 10 seconds from 1 x to 22 x magnification (slow speed).  
3 : Takes about 6 seconds from 1 x to 22 x magnification (fast speed).  
4 : Takes about 3 seconds from 1 x to 22 x magnification (fastest speed).  
Press the  
ENTER  
button.  
AREA  
SENSITIVITY  
RET  
PRESET...  
MEDIUM  
DETAIL: Adjusts the sharpness.  
23  
24  
 
If you select ON and press the ENTER button, the MOTION  
DET screen will come up. You can set the AREA to which the  
Motion Detection function will be applied to either PRESET or  
USER. If you set the AREA option to PRESET, the Motion  
Detection function will be applied to the areas preset as factory  
defaults. If you set the AREA option to USER and press the  
ENTER button, you can change the area size and position and  
select the area where you want to apply the Motion Detection  
function. You can specify the size of the area by using the UP,  
DOWN, LEFT, and RIGHT buttons. If the area is not flashing,  
press the ENTER button. When the area starts flashing, use the  
UP, DOWN, LEFT and RIGHT buttons to specify the location of  
the area. Use the ENTER button and the UP, DOWN, LEFT,  
and RIGHT buttons to specify the size of the area and to  
position the area. Press the ENTER button again to exit the  
AREA setting menu. You can use the SENSITIVITY option to  
set the motion detection sensitivity. The higher the setting, the  
more sensitive the motion detection.  
(PRESET MAP)  
PRESET NO. 0  
0
H
1
2
3
8
13  
18  
23  
28  
4
9
14  
19  
24  
29  
RET  
OFF  
5
6
7
POSITION SET  
PRESET ID  
...  
ON...  
10  
15  
20  
25  
30  
11  
16  
21  
26  
31  
12  
17  
22  
27  
Press the  
ENTER  
button.  
HOME RETURN  
EXIT  
QUIT  
EXIT  
QUIT  
If you select a preset number and press the ENTER button, a screen  
that looks as above will appear.  
E
POSITION SET : Select to store the ZOOM and FOCUS  
positions.  
PRESET ID : Select to set an ID for the PRESET position,  
as you did with Camera ID.  
The HOME RETURN function is available with a camera  
with the ROM version 1.2 or above. For instruction on the  
use of this function, please refer to page 33.  
SIZE  
SIZE  
Use the UP,  
DOWN,  
©
©
LEFT, and  
RIGHT  
COLOR / BW  
buttons.  
The COLOR / BW option is available only with the SCC-C4203(P)  
and C4303(P).  
POSITION  
POSITION  
In the COLOR / BW option, you can set the IR (infrared) Filter to ON or  
OFF. In the BW mode, the IR Filter is turned OFF and the level of  
sensitivity is increased to a level comparable to a black and white  
camera. In the COLOR mode, on the other hand, the IR Filter is turned  
ON and the screen turns normal, as the level of sensitivity is decreased.  
PRESET  
(SET UP)  
CAMERA ID  
IRIS  
SHUTTER  
AGC  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
COLOR/BW  
EXIT  
(PRESET MAP)  
OFF  
ALC...  
OFF  
LOW  
ATW  
...  
ONEAF  
OFF  
0
H
1
2
3
8
13  
18  
23  
28  
4
9
14  
19  
24  
29  
RET  
OFF  
5
6
7
10  
15  
20  
25  
30  
11  
16  
21  
26  
31  
12  
17  
22  
27  
COLOR : The IR Filter is ON and the screen is normal.  
Press the  
ENTER  
button.  
BW : The IR Filter is OFF and the screen is black and  
...  
HOME RETURN  
white. (Sensitivity to low light is increased to a level  
comparable to a black and white camera.)  
COLOR  
QUIT  
EXIT  
QUIT  
AUTO : Select to automatically switch between the COLOR  
mode and BW mode depending on the amount of light.  
You can store up to 128 ZOOM and FOCUS positions with the  
PRESET. You can use the PRESET function when you connect  
the SSC-1000 to the RS-485.  
25  
26  
 
In low light conditions, the IR Filter is turned OFF and the  
sensitivity to low light is increased by switching to the BW  
mode, but in bright light conditions, the IR Filter is turned  
ON and the sensitivity is decreased by switching to the  
COLOR mode. If you select AUTO and press the ENTER  
button, a screen from which you can set the ALARM  
ON/OFF, BURST ON / OFF, BW LEVEL and DWELL TIME  
will appear.  
EXIT  
The EXIT option is used to quit the Setup Menu mode and  
return to the Normal Operation mode.  
QUIT : Select to ignore any changes you have made and  
restore the previously saved settings.  
SAVE : Select to save the settings that have been  
changed so far.  
-
-
ALARM ON : It sends out signals through the ALARM output  
port in the BW mode.  
ALARM OFF : The ALARM output port is synchronized with  
the MOTION DET finction regardiess of the COLOR/BW  
mode.  
PRESET : Select to ignore any changes you have made  
and restore the factory default settings.  
E
-
-
-
BURST ON : The color burst signal is output together with  
black and white composite video signal.  
BURST OFF : The color burst signal is not output.  
LEVEL : You can set the brightness level that changes from  
COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and  
HIGH.  
DWELL TIME : Set the HOLDING time for switching between  
COLOR and BW mode depending the changes in the amount  
of light. You can set the HOLDING time to 10sec (S), 30sec,  
60sec, or 300sec( L).  
In AUTO mode, AGC will operates in high speed mode, and  
you cannot change it manually, as it is indicated by "---".  
(SET UP)  
(BW SETUP)  
CAMERA ID  
IRIS  
SHUTTER  
AGC  
OFF  
ALC...  
OFF  
---  
WHITE BAL  
SPECIAL  
AUTO FOCUS  
MOTION DET  
PRESET  
COLOR/BW  
EXIT  
ATW  
...  
ONEAF  
OFF  
...  
Press the  
ENTER  
button.  
ALARM  
BURST  
LEVEL  
DWELL TIME  
RET  
OFF  
ON  
MEDIUM  
S--|----L  
AUTO...  
QUIT  
Caution : If you use an infrared light source while in AUTO  
mode, AUTO switching malfunction and camera  
AF malfunction may occur.  
27  
28  
 
Specifications  
5
SCC-C4201/C4203  
SCC-C4201P/C4203P  
Item  
Product Type  
Description  
- 22x Zoom Camera  
Remark  
Item  
Description  
- 22x Zoom Camera  
- DC 12V 10%  
Remark  
Product Type  
Power Supply Voltage  
Power Consumption  
Broadcast System  
Imaging Device  
Power Supply Voltage  
Power Consumption  
Broadcast System  
Imaging Device  
Effective Pixe  
- DC 12V 10%  
- 5.0 W  
- 5.0 W  
- NTSC Standard Color System  
- 1/4 inch IT CCD  
- 768(H) x 494 (V)  
- 525 Line, 2:1 Interlace  
- PAL Standard Color System  
- 1/4 inch IT CCD  
E
Effective Pixe  
- 752 (H) X 582 (V)  
- 625 Line, 2:1 Interlace  
Scanning Method  
Scanning Method  
- Horizontal : 15,734 Hz (INT)  
- Vertical : 59.94 Hz (INT)  
- Horizontal : 15,625 Hz(INT)  
- Vertical : 50 Hz(INT)  
Line Frequency  
Line Frequency  
Synchronization Method  
Resolution  
- INT Only  
Synchronization Method  
Resolution  
- INT Only  
- 480 TV Lines  
- 52dB(AGC OFF)  
- 480 TV Lines  
- 52dB(AGC OFF)  
S/N Ratio  
S/N Ratio  
- 0.3Lux(SENS UP X4)  
(0.01Lux)  
- B/W(SCC-C4203):0.4Lux  
(0.003Lux)  
- 0.3Lux(SENS UP X4)  
(0.01Lux)  
- B/W(SCC-C4203P):0.4Lux  
(0.003Lux)  
Minimum Scene Illumination  
Minimum Scene Illumination  
- ATW/ AWC/ Manual Mode  
(3200°K, 5600°K, R/B Gain Control)  
- ATW/ AWC/ Manual Mode  
(3200°K, 5600°K, R/B Gain Control)  
White Balance  
Signal Output  
White Balance  
Signal Output  
- Composite Video Out : 1.0 Vp-p  
75ohms/BNC  
- Composite Video Out : 1.0 Vp-p  
75ohms/BNC  
- 22x Zoom Lens in a single unit  
- Focal length : 3.6 to 79.2 mm  
- Aperture : F1.6(Wide), F3.8(Tele)  
- IR Filter On/Off (SCC-C4203 Only)  
- 22x Zoom Lens in a single unit  
- Focal length : 3.6 to 79.2 mm  
- Aperture : F1.6(Wide), F3.8(Tele)  
- IR Filter On/Off (SCC-C4203P Only)  
Lens  
Lens  
- Off, 1/100, 1/250, 1/500, 1/1K, 1/2K,  
1/4K, /10K sec  
- Off, 1/120, 1/250, 1/500, 1/1K, 1/2K,  
1/4K, /10K sec  
Electronic Shutter  
Electronic Shutter  
Back Light Compensation  
Sense Up  
- Off / On (Area Setting)  
Back Light Compensation  
Sense Up  
- Off / On (Area Setting)  
- Off/Auto 2x~128x/Fix 2x~128x  
- Off / On (x10), PIP  
- Off/Auto 2x~128x/Fix 2x~128x  
- Off / On (x10), PIP  
Digital Zoom  
Digital Zoom  
Motion Detection  
- Off / On (Area / Sensitivity Setting)  
Motion Detection  
- Off / On (Area / Sensitivity Setting)  
Operating Temperature  
and Humidity  
Operating Temperature  
and Humidity  
- 14°F ~ +122°F, ~90 %  
- 14°F ~122°F, ~90 %  
Dimensions  
Weight  
- 59.5 x 60.5 x 109.5mm  
- 375g  
Dimensions  
Weight  
- 59.5 x 60.5 x 109.5mm  
- 375g  
29  
30  
 
Specifications  
SCC-C4301/C4303  
SCC-C4301P/C4303P  
Item  
Product Type  
Description  
- 22x Zoom Camera  
Remark  
Item  
Description  
- 22x Zoom Camera  
Remark  
Product Type  
Power Supply Voltage  
Power Consumption  
Broadcast System  
Imaging Device  
Power Supply Voltage  
Power Consumption  
Broadcast System  
Imaging Device  
Effective Pixe  
- AC 24V (60Hz) or DC 12V 10%  
- 5.5W  
- AC 24V (50Hz) or DC 12V 10%  
- 5.5W  
- NTSC Standard Color System  
- 1/4 inch IT CCD  
- PAL Standard Color System  
- 1/4 inch IT CCD  
E
- 768(H) X 494(V)  
Effective Pixe  
- 752(H) X 582(V)  
Scanning Method  
- 525 Line, 2:1 Interlace  
Scanning Method  
- 625 Line, 2:1 Interlace  
-
Horizontal : 15,734 Hz(INT), 15,750 Hz(L/L)  
-
Horizontal : 15,625 Hz(INT), 15,625 Hz(L/L)  
Line Frequency  
Line Frequency  
- Vertical : 59.94 Hz(INT), 60 Hz(L/L)  
- Vertical : 50 Hz(INT), 50 Hz(L/L)  
Synchronization Method  
Resolution  
- INT / Line Lock  
Synchronization Method  
Resolution  
- INT / Line Lock  
- 480 TV Lines  
- 480 TV Lines  
S/N Ratio  
- 52dB(AGC OFF)  
S/N Ratio  
- 52dB(AGC OFF)  
- 0.3Lux(SENS UP X4)  
(0.01Lux)  
- B/W(SCC-C4303):0.4Lux  
(0.003Lux)  
- 0.3Lux(SENS UP X4)  
(0.01Lux)  
- B/W(SCC-C4303P):0.4Lux  
(0.003Lux)  
Minimum Scene Illumination  
Minimum Scene Illumination  
- ATW/ AWC/ Manual Mode  
(3200°K, 5600°K, R/B Gain Control)  
- ATW/ AWC/ Manual Mode  
(3200°K, 5600°K, R/B Gain Control)  
White Balance  
Signal Output  
White Balance  
Signal Output  
- Composite Video Out : 1.0 Vp-p  
75ohms/BNC  
- Composite Video Out : 1.0 Vp-p  
75ohms/BNC  
- 22x Zoom Lens in a single unit  
- Focal length : 3.6 to 79.2 mm  
- Aperture : F1.6(Wide), F3.8(Tele)  
- IR Filter On / Off (SCC-C4303 Only)  
- 22x Zoom Lens in a single unit  
- Focal length : 3.6 to 79.2 mm  
- Aperture : F1.6(Wide),F3.8(Tele)  
- IR Filter On/ Off (SCC-C4303P Only)  
Lens  
Lens  
- Off, 1/100, 1/250, 1/500, 1/1K, 1/2K,  
1/4K, /10K sec  
- Off, 1/120, 1/250, 1/500, 1/1K, 1/2K,  
1/4K, /10K sec  
Electronic Shutter  
Electronic Shutter  
Back Light Compensation  
Sense Up  
- Off / On (Area Setting)  
Back Light Compensation  
Sense Up  
- Off / On (Area Setting)  
- Off/Auto 2x~128x/Fix 2x~128x  
- Off / On (x10), PIP  
- Off/Auto 2x~128x/Fix 2x~128x  
- Off / On (x10), PIP  
Digital Zoom  
Digital Zoom  
Motion Detection  
- Off / On (Area / Sensitivity Setting)  
Motion Detection  
- Off / On (Area / Sensitivity Setting)  
Operating Temperature  
and Humidity  
Operating Temperature  
and Humidity  
- 14°F ~122°F, ~90 %  
- 14°F ~122°F, ~90 %  
Dimensions  
Weight  
- 59.5 x 60.5 x 143mm  
- 500g  
Dimensions  
Weight  
- 59.5 x 60.5 x 143mm  
- 500g  
31  
32  
 
Others  
6
1 : With the menu "off", if voltage is applied for shorter than 2  
seconds, the AF function will be activated, and if voltage is  
applied for longer than 2 seconds, the menu will be "on".  
With the menu "on", if voltage is applied, the ENTER  
function will be activated.  
ZOOM/FOCUS Remote Terminals  
These terminals are to activate the ZOOM/FOCUS,  
MENU CONTROL, HOME RETURN, and AF functions  
by using an external controller. They could be set to one  
of four modes depending on the input condition: A, B, C,  
and D. (SPECIAL - CTRL TYPE)  
2 : If voltage is applied for longer than 2 seconds, the  
camera will return to the specified home position  
(PRESET 0).  
(Operating Voltage Range : +3V~+13V, -3V~-13V)  
E
1) If voltage is applied to either the ZOOM or FOCUS  
terminal, but not both  
HOME RETURN  
Function*1 TELE (Up) WIDE (Down) NEAR (Left) FAR (Right)  
If no keys are pressed for a period of time, the camera will  
automatically return to the specified home position.  
The home position is set to PRESET 0. If the position of  
PRESET 0 has not been saved, the HOME RETURN  
function will not work.  
Code  
ZOOM Terminal  
FOCUS Terminal  
A
-6V  
+6V  
+6V  
-6V  
-6V  
-6V  
+6V  
-6V  
+6V  
-6V  
+6V  
-6V  
B
C
D
-6V  
+6V  
+6V  
+6V  
Setting the Home Return Time  
1: In MENU OFF, these are used to control the  
ZOOM/FOCUS function, and in MENU ON, these  
are used as the UP, DOWN, LEFT, and RIGHT  
keys  
OFF © 1 MIN © 2 MIN © 3 MIN~60 MIN © 2HOUR ©  
©
3HOUR ~12HOUR  
2) If voltage is applied to the ZOOM and FOCUS  
terminals at the same time  
ENTER/AF*1  
HOME RETURN*2  
Function  
Code  
ZOOM Terminal FOCUS Terminal ZOOM Terminal FOCUS Terminal  
A
B
C
D
-6V  
-6V  
-6V  
+6V  
-6V  
+6V  
+6V  
-6V  
-6V  
+6V  
-6V  
+6V  
-6V  
+6V  
+6V  
+6V  
33  
34  
 
Memo  
Memo  
 

Ricoh Printer CL3000 User Guide
Roland Scanner LPX 1200 User Guide
Royal Sovereign Air Conditioner ARP 9409 User Guide
Runco Flat Panel Television XP 50DHD, XP 50DHDxa, XP 65DHD, XP 65DHDxa, XP 103DHD User Guide
Samsung Computer Drive BG68 01525A User Guide
Samsung CRT Television TXN 2030F User Guide
Samsung Laptop R19 User Guide
Schneider Electric Network Card AP9635 User Guide
Schwinn Exercise Bike 123 User Guide
Sears Home Gym 831285780 User Guide