Samsung CRT Television CL29K40PQ, CL29K40MQ, CL29M40MQ User Guide

Connection Panel(depending on the model)  
COLOR TELEVISION  
CL29K40PQ/CL29K40MQ/CL29M40MQ  
The product color and shape may vary depending on  
the model.  
Rear Jack  
Side Jack  
Œ
Œ
´
¨
Owner’s Instructions  
Before operating, please read this manual thoroughly,  
´
ˇ
ˇ
and retain it for future reference.  
ˇ
Register your product at  
Control Panel(depending on the model)  
Whenever you connect an audio or video system to your  
TV, ensure that all elements are switched off. Please be  
sure to match the color coded input terminals and cable  
jacks.  
Please be sure to match the color coded input terminals  
and cable jacks.  
When both the side and rear jacks (AV IN 2) are  
connected to external equipment, the side receives  
priority.  
The product color and shape may vary depending on  
the model.  
Front Panel  
Œ Audio/Video Output Jacks  
Œ S-Video Input Jack  
Connect to the audio/video input jacks of a recording VCR.  
Connect an S-Video signal from a camcorder or video game.  
´ Audio/Video Input Jacks  
´ Video Input Jack  
Connect to the audio/video output jacks of VCRs, DVD  
players and similar devices.  
Connect a video signal from a camcorder or video game.  
ˇ Component Video Input Jacks (Y, PB, PR)  
ˇ Audio Input Jacks  
Œ On-screen menu display  
´ Volume adjustment  
¨ Channel selection  
¨ Remote control sensor  
ˆ Indicator (Standby or Timer)  
Ø Power on/off  
Connect to the Component video outputs of a DVD or DTV  
set-top box. 480i video signal input is available.  
When using the Component Video input, connect audio jacks  
to “AV IN 2 (AUDIO-L/R)”.  
Connect audio signals from a camcorder or video game.  
¨ VHF/UHF  
Connect to an antenna or to a cable TV system.  
The ´ and ˇ buttons also have the same function as the  
œ///buttons on the remote control.  
If the remote control no longer works or you have  
misplaced it, you can use the controls on the panel of the  
TV.  
AA68-03858A-03  
English - 1  
 
5
6
After all available  
Setup - Plug & Play  
Input -  
Source List / Edit Name  
(depending on the model)  
Plug & Play  
channels are stored, the  
“Clock Set” is displayed.  
Press the œ or button  
to move to the hour or  
minute. Set the clock by  
pressing the or button.  
Clock Set  
Move  
-- : -- am  
When the TV is initially powered on, several basic  
customer settings proceed automatically and  
subsequently.  
Enter  
Skip  
Source List  
Source List  
The following settings are available.  
TV  
AV1  
AV2  
S-Video  
Component  
You can switch between  
viewing signal from  
connected equipment,  
such as a VCR, DVD,  
----  
----  
----  
----  
1
Press the POWER  
button on the remote  
control.  
Plug & Play  
When you have  
Start Plug & Play  
OK  
finished, press the  
MENU button. The  
“Enjoy your watching.”  
is displayed.  
Move  
Enter  
Return  
set-top box, and the TV  
source (broadcast or  
cable).  
The “Start Plug & Play”  
is displayed. Press the  
ENTER button, then the  
“Language” is displayed.  
Enjoy your watching.  
OK  
Enter  
Exit  
Press the SOURCE button on the remote  
control repeatedly to select the desired signal  
source.  
Plug & Play feature  
doesn’t work in the AV mode.  
2
3
4
Press the or button  
to select the desired  
language, then press the  
ENTER button. The  
“Check antenna input.” is  
displayed.  
Plug & Play  
Language  
Edit Name  
Setup  
Re-setting the Plug &  
Play  
Method: MENU /†  
(Setup) ENTER /†  
(Plug & Play) ENTER  
You can give a name to  
the external source.  
Edit Name  
English  
Plug & Play  
Language  
Time  
Español  
Português  
Français  
: English  
AV1  
AV2  
S-Video  
Component  
----  
----  
VCR
DVD
Caption  
Child Lock  
Blue Screen  
Melody  
Cable S  
T
B
: Off  
: On  
Move  
Enter  
Skip  
Sat. STB  
AV Receiver  
DVD Receiver  
Demonstration  
Move Enter  
Return  
Move  
Enter  
Return  
Make sure that the  
antenna is connected to  
the TV. Press the  
ENTER button, then the  
“Auto Program” is  
displayed.  
Plug & Play  
Check antenna input.  
OK  
Enter  
Skip  
Press the ENTER button  
to start. The TV begins  
memorizing all available  
channels. Press the  
Plug & Play  
Auto Program  
Air 3  
3%  
Stop  
ENTER button to stop.  
Enter  
Skip  
English - 3  
 
Channel - Memorizing the Channels  
Channel - FineTune  
Setup -Time  
Time  
Clock  
Your TV can memorize and store all of the available  
channels for both “off-air” (antenna) and cable  
channels. After the available channels are memorized,  
The Fine Tuning function lets  
you manually adjust the TV’s  
tuner if you have difficulty  
tuning channels.  
Clock  
--  
:
-- am  
Fine Tune  
Reset  
Setting the clock is  
Sleep Timer  
On Timer  
Off Timer  
On Timer Channel  
On Timer Volume  
: Off  
:
:
--  
--  
-- am Off  
-- am Off  
3  
1
necessary in order to use  
the various timer features  
of the TV. Also, you can  
check the time while  
watching the TV. (Just  
press the INFO button.)  
:
:
3
10  
use the CH and CH  
channels.  
buttons to scan through the  
Move  
Adjust  
Adjust the fine tuning by  
pressing the œ or button.  
Return  
Move  
Enter  
Return  
This eliminates the need to change channels by  
entering the channel digits. There are three steps for  
memorizing channels: “Air/Cable”, “Auto Program”  
and “Add/Delete”.  
To store the fine tuning setting in the TV’s memory,  
press the MENU button.  
Sleep Timer  
To reset the fine tuning to “0”, select ”Reset” by  
pressing the or button, then press the ENTER  
button.  
You can select a time period of between 30 and  
180 minutes after which the TV automatically  
switches to standby mode.  
Air/Cable  
Before your TV can begin  
memorizing the available  
channels, you must  
specify the type of signal  
source that is connected  
to the TV (i.e., an  
Channel  
Air/Cable  
Auto Program  
Add/Delete  
Fine Tune  
Name  
:
Air  
Cable  
Press the SLEEP button on the remote  
control repeatedly until the appropriate time  
interval appears (any of the preset values  
from “30 Min.” to “180 Min.”).  
LNA  
: Off  
Channel - Name  
Move  
Enter  
Return  
Use this feature to assign an  
easy-to-remember label to  
any channel (i.e., “CBS”,  
“ESPN”, “PBS2”, “CNN1”,  
etc.). A label consists of four  
fields, where each field is a  
letter (A~Z), a number (0~9),  
Name  
antenna or a cable  
system).  
On Timer / Off Timer  
More  
2
3
4
5
6
:
:
:
:
:
A
You can set the On/Off timers so that the TV will  
switch on or off automatically at the time you  
select.  
- - - -  
- - - -  
- - - -  
- - - -  
Select “Air” or “Cable” by pressing the or †  
button.  
More  
You must set the clock first.  
Move  
Adjust  
Return  
Auto Program  
On Timer Channel  
All available channels are  
Search  
-, or a blank. When the INFO button is pressed, the  
channel label will appear next to the channel number.  
The preferred channel can be set for when the  
timer automatically turns on the TV.  
automatically stored in  
memory when channels  
Air 3  
3%  
are selected by the direct  
tuning function.  
Stop  
On Timer Volume  
Enter  
Return  
The preferred volume can be set for when the  
timer automatically turns on the TV.  
Press the ENTER button  
at any time to interrupt  
the memorization process.  
Channel - LNA (depending on the model)  
When a weak broadcast  
signal causes an unclear,  
noisy picture, the “LNA”  
feature improves the picture  
quality by setting to “On”. If  
you experience noise on a  
certain channel, set the  
Channel  
Auto Power Off  
Air/Cable  
Auto Program  
Add/Delete  
Fine Tune  
Name  
: Air  
When you set the timer “On”, the TV will  
eventually turn off, if no controls are operated for  
3 hours after the TV was turned on by timer. This  
function is only available in timer “On” mode and  
prevents overheating or leakages, which may  
occur if a TV is on for too long.  
Add/Delete  
You can add or delete a  
channel to display the  
channels you want only.  
To use the Add/Delete  
function, first run Auto  
Program.  
Add/Delete  
Off  
LNA  
:
On  
More  
2
3
4
5
6
: Deleted  
: Added
: Deleted  
: Deleted  
: Deleted  
Move  
Enter  
Return  
More  
“LNA” to “On” or “Off” for this channel, to obtain the  
optimum picture.  
Move  
Enter  
Return  
Select “Deleted” or  
“Added” by pressing the  
or button.  
English - 4  
 
Setup - Caption  
Setup - Child Lock (depending on the model)  
Setup -  
Language / Blue Screen /  
Melody / Demonstration  
Caption  
Child Lock  
Your TV decodes and  
This feature allows you to  
prevent unauthorized users,  
such as children, from  
Caption  
Mode  
Channel  
Field  
: On  
Child Lock  
Channel  
Lock  
: On  
: 11  
: ?  
displays the closed captions  
that are broadcast with  
certain TV shows. These  
captions are usually subtitles  
for the hearing impaired or  
foreign-language  
translations. All VCRs record the closed caption signal  
from TV programs, so home-recorded video tapes  
also provide closed captions. Most pre-recorded  
commercial video tapes provide closed captions as  
well. Check for the closed caption symbol in your TV  
: Caption  
: 1  
: 1  
Setup  
Language  
watching unsuitable  
Plug & Play  
Language  
Time  
When you start using the  
TV for the first time, you  
must select the language  
which will be used for  
displaying menus and  
indications.  
: English  
programs by muting out  
video and audio. Child Lock  
cannot be released using  
Move  
Enter  
Return  
Move  
Enter  
Return  
Caption  
Child Lock  
Blue Screen  
Melody  
: Off  
: On  
Demonstration  
front panel buttons. Only remote control can release  
the Child Lock setting, so keep the remote control  
away from children.  
Move Enter  
Return  
Blue Screen  
Child Lock: On/Off  
If no signal is being received or the signal is very  
weak, a blue screen automatically replaces the  
noisy picture background. If you wish to continue  
viewing the poor picture, you must set the “Blue  
Screen” to “Off”.  
schedule and on the tape’s packaging:  
.
You can activate or deactivate the Child Lock  
function.  
Caption: On/Off  
You can activate or deactivate the Caption  
function.  
Channel: Channel number to be locked.  
Press the CAPTION button on the remote  
control repeatedly to select “On” or “Off”.  
Lock: When press the ENTER button, the  
Melody  
“Locked” is displayed.  
You can hear melody sound when the TV is  
powered on or off.  
Mode  
If any channel is locked, you can not access to  
the “Channel” and “Child Lock” menu by using  
the control buttons on the TV panel (the “Not  
Available” is displayed in the “Child Lock” menu).  
You can access by using the remote control only.  
-
In “Caption” mode, captions appear at the  
Demonstration  
bottom of the screen, and they usually cover  
only a small portion of the picture.  
In “Text” mode, information unrelated to the  
program, such as news or weather, is  
displayed. Text often covers a large portion of  
the screen.  
To become familiar with the various menus  
provided by the TV, you can view the in built  
demonstration.  
-
Each of the menu options is displayed in turn.  
When you wish to stop the demonstration, press  
any button on the remote control.  
Channel / Field  
Depending on the particular broadcast, it might be  
necessary to make changes to “Channel” and  
“Field”.  
Different channels and fields display different  
information: Field 2 carries additional information  
that supplements the information in Field 1.  
(For example, Channel 1 may have subtitles in  
English, while Channel 2 has subtitles in Spanish.)  
Misspellings and unusual characters sometimes  
occur during closed caption transmissions,  
especially those of live events. There may be a  
small delay before captions appear when you  
change channels. These are not malfunctions of  
the TV.  
English - 5  
 
Color Tone: Cool2/Cool1/Normal/Warm1/Warm2  
You can change the color of the entire screen  
according to your preference.  
R.Surf Feature  
Picture - PIP (depending on the model)  
This feature allows you to  
set the TV to return to a  
particular channel after a  
certain amount of time. For  
example, you may be  
watching a channel when  
commercials start. You can  
set the R.Surf to “5 minutes”, then switch channels.  
After minutes, the TV will return to the original  
channel.  
You can display a sub picture within the main picture  
of TV program or external A/V devices such as VCR  
or DVD.  
In this way you can watch TV program or monitor the  
video input from any connected devices while  
watching TV or other video input.  
Reset  
The previously adjusted picture settings will be  
reset to the factory defaults.  
Surf  
00: 29  
Size: Normal/Zoom  
You can select the picture size which best  
corresponds to your viewing requirements.  
PIP  
PIP: On/Off (Œ)  
PIP  
Source  
Swap  
Size  
Position  
Channel  
: On  
: AV1  
You can activate or  
deactivate the PIP  
function.  
Press the P.SIZE button on the remote control  
to change the picture size.  
: Large  
:
: 3  
Press the R.SURF button repeatedly to set the timer  
in thirty second intervals, up to five minutes.  
If the PIP is activated  
(On) when the  
Digital NR  
Move  
Enter  
Return  
If the signal received by the TV is weak, you can  
activate this feature to reduce any static and  
ghosting that may appear on the screen.  
picture size is set to  
“Zoom” mode, the picture size is automatically  
converted into “Normal” mode. However, you  
can select “Zoom” after activating the PIP.  
You can hear only the sound of the main  
picture while the PIP is activated.  
The PIP function is not available in  
“Component” mode.  
Picture -  
DNIe Jr (Digital Natural Image engine Junior)  
(depending on the model)  
Mode / Custom /  
ColorTone / Size /  
Digital NR / DNIe Jr / Tilt  
This feature bring you more detailed image with  
detail enhancement, contrast enhancement and  
white enhancement. New image compensation  
algorithm gives brighter, clearer, much detailed  
image to you.  
DNIe Jr technology will fit every signals into your  
eyes.  
Picture  
Mode:  
Source  
You can select a source of the sub-picture.  
Mode  
Size  
Digital NR  
DNIe Jr  
Tilt  
: Dynamic  
: Normal  
: Off  
: On  
: 0  
Dynamic/Standard  
Movie/Custom  
You can select the type of  
picture which best  
corresponds to your  
viewing requirements.  
PIP  
Swap (´)  
You can interchange the main picture and the sub-  
picture.  
Move  
Enter  
Return  
Tilt (depending on the model)  
If you find that the picture received is slightly tilted  
to one side, you can adjust the tilt setting.  
Mode  
Press the P.MODE  
Mode  
: Dynamic  
Size: Small/Large  
Contrast  
Brightness  
Sharpness  
Color  
:
:
:
:
100  
50  
75  
button on the remote  
control to select one  
of the standard  
You can select a size of the sub-picture.  
50  
Tint  
: G 50 R 50  
: Cool1  
Color Tone  
Reset  
Position:  
/
/
/
picture settings.  
Move  
Enter  
Return  
You can select a position of the sub-picture.  
Contrast/Brightness/  
Channel (ˇ)  
Sharpness/Color/Tint  
You can select a channel of the sub-picture only  
when the “Source” is set to “TV”.  
The TV has several settings which allow you to  
control the picture quality.  
Easy functions of the  
remote control  
English - 6  
 
Turbo Plus  
Your remote control does not operate your TV.  
Make sure the remote has batteries.  
Check that the “+” and “-” ends of the batteries  
are inserted correctly.  
Sound -  
This feature emphasizes the bass and treble  
frequencies to add fullness to the sound.  
Mode / Equalizer / MTS  
Auto Volume / Pseudo Stereo /  
Turbo Plus  
Press the TURBO button on the remote  
control repeatedly to select “On” or “Off”.  
Check that the batteries are drained.  
The TV won’t turn on.  
Sound  
Mode: Standard/Music/  
Make sure the wall outlet is working.  
Make sure the TV is plugged in.  
Make sure the remote has batteries.  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Custom  
Movie/Speech/Custom  
Troubleshooting  
: Stereo  
: Off  
: Off  
You can select the type of  
special sound effect to be  
: Off  
If the TV seems to have a problem, first try this list of  
possible problems and solutions. If none of these  
troubleshooting tips apply, then call your nearest  
Samsung authorized service center.  
used when watching a  
Remote control malfunctions  
given broadcast.  
Move  
Enter  
Return  
Replace the remote control batteries.  
Clean the upper edge of the remote control  
(transmission window).  
Press the S.MODE  
button on the remote control to select one of  
the standard sound settings.  
Poor picture.  
Check that the “+” and “-” ends of the batteries  
are inserted correctly.  
Check that the batteries are drained.  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Equalizer  
The TV has several settings which allow you to  
control the sound quality.  
If you make any changes to these settings,  
the sound mode is automatically switched to  
“Custom”.  
Poor sound quality.  
Try another channel.  
Adjust the antenna.  
MTS (Multi-channel Television Sound)  
Depending on the particular program being  
broadcast, you can listen to Mono, Stereo, or SAP.  
No picture or sound.  
Try another channel.  
Press the TV/VIDEO button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
Make sure the MUTE button is off.  
Press the MTS button on the remote control  
repeatedly to select “Stereo”, “Mono”, or  
“SAP” (Secondary Audio Program).  
Auto Volume  
No color, wrong colors or tints.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
Each broadcasting station has its own signal  
conditions, and so it is not easy to adjust the  
volume every time the channel is changed. This  
feature lets you automatically adjust the volume of  
the desired channel by lowering the sound output  
when the modulation signal is high or by raising  
the sound output when the modulation signal is  
low.  
Picture rolls vertically.  
Adjust the antenna.  
Check all wire connections.  
If you are using a VCR, check the tracking.  
The TV operates erratically.  
Unplug the TV for 30 seconds, then try operating  
it again.  
Pseudo Stereo  
This feature converts a monaural sound signal into  
two identical left and right channels. Once the  
“Pseudo Stereo” is set to “On” or “Off”, the setting  
applies to the sound effects such as “Standard”,  
“Music”, “Movie” and “Speech”.  
English - 7  
 
OSD Map  
Important Warranty Information  
RegardingTelevision Format Viewing  
: It is variable depending on the model.  
Input  
-
-
Source List  
Edit Name  
-
VCR / DVD / Cable STB / Sat. STB / AV Receiver / DVD Receiver / Game /  
Camcorder / DVD Combo  
Standard screen format televisions (4:3, the aspect  
ratio of the screen width to height) are primarily  
designed to view standard format full-motion video.  
The images displayed on them should primarily be in  
the standard 4:3 ratio format and constantly moving.  
Displaying stationary graphics and images on screen,  
such as the dark top and bottom letterbox bars (wide  
screen pictures), should be limited to no more than  
15% of the total television viewing per week.  
Picture  
-
Mode  
-
-
-
-
Dynamic / Standard / Movie / Custom  
Contrast / Brightness / Sharpness / Color / Tint  
Color Tone  
Reset  
-
Cool2 / Cool1 / Normal / Warm1 / Warm2  
-
-
-
-
-
Size  
Digital NR  
-
-
Off / On  
Off / On  
DNIe Jr  
Tilt  
PIP  
-
-
-
-
-
-
PIP  
-
Off / On  
Wide screen format televisions (16:9, the aspect ratio  
of the screen width to height) are primarily designed  
to view wide screen format full-motion video. The  
images displayed on them should primarily be in the  
wide screen 16:9 ratio format, or expanded to fill the  
screen if your model offers this feature, and constantly  
moving. Displaying stationary graphics and images on  
screen, such as the dark side-bars on non-expanded  
standard format television video and programming,  
should be limited to no more than 15% of the total  
television viewing per week.  
Source  
Swap  
Size  
Position  
Channel  
Sound  
Channel  
Setup  
-
-
-
-
-
-
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
-
Standard / Music / Movie / Speech / Custom  
-
-
-
-
Mono / Stereo / SAP  
Off / On  
Off / On  
Off / On  
Additionally, viewing other stationary images and text  
such as stock market reports, video game displays,  
station logos, web sites or computer graphics and  
patterns, should be limited as described above for all  
televisions. Displaying any stationary images that  
exceed the above guidelines can cause uneven  
aging of picture tubes (CRTs) that leave subtle,  
but permanent burned-in ghost images in the  
television picture. To avoid this, vary the  
programming and images, and primarily display  
full screen moving images, not stationary  
patterns or dark bars. On television models that  
offer picture sizing features, use these controls to  
view the different formats as a full screen picture.  
-
-
-
-
-
-
Air/Cable  
Auto Program  
Add/Delete  
Fine Tune  
Name  
-
-
Air / Cable  
Added / Deleted  
LNA  
-
Off / On  
-
-
-
Plug & Play  
Language  
Time  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
English / Español / Português / Français  
Clock  
Sleep Timer  
On Timer  
Off Timer  
On Timer Channel  
On Timer Volume  
Caption  
Mode  
Channel  
Field  
Child Lock  
Channel  
Lock  
-
-
Caption  
-
-
-
-
-
Off / On  
Caption / Text  
1 / 2  
Be careful in the selection and duration of television  
formats used for viewing. Uneven CRT aging as a  
result of format selection and use, as well as other  
burned-in images, is not covered by your Samsung  
limited warranty.  
1 / 2  
Child Lock  
Off / On  
-
-
-
Blue Screen  
Melody  
Demonstration  
Off / On  
Off / On  
English - 8  
 

PYLE Audio Speaker PSS4 User Guide
Quantum Mobility Aid Access Ramp User Guide
Raymarine GPS Receiver ST4000+ User Guide
Ricoh Photo Printer MP C4000 User Guide
Russound Speaker SP5502 User Guide
Ryobi Cordless Drill CDI 1803M User Guide
Ryobi Grinder BGH615 User Guide
Ryobi Trimmer 704r User Guide
Samsung Cell Phone 07202010 User Guide
Satco Products Indoor Furnishings HID Lamps User Guide