Samsung CRT Television AA68 03992B 00 User Guide

Connection Panel (depending on the model)  
Front (or Side) Panel  
COLOR TELEVISION  
The product color and shape may vary depending on the  
model.  
CL2ꢀZ43/2ꢀZ45/2ꢀZ47/2ꢀZ50/21AM0  
2ꢀZ57/2ꢀZ58/21A750/2ꢀAE0/2ꢀAF0  
CT2ꢀZ43/2ꢀZ45/2ꢀZ47/2ꢀZ50/21AM0  
2ꢀZ57/2ꢀZ58/21A750/2ꢀAE0/2ꢀAF0  
1
1
2
Rear Jack  
2
3
1
4
Owner’s Instructions  
2
3
3
Before operating, please read this manual thoroughly,  
and retain it for future reference.  
Record your Model and Serial number.  
1
1
2
3
▪ Model __________ ▪ Serial No. __________  
4
2
3
1
2
1
2
3
Audio input  
Video inpout  
Headphone jack  
Control Panel (depending on the model)  
The product colour and shape may vary depending on the  
model.  
1
2
4
Front (or Side) Panel  
1
2
Please be sure to match the colour coded input terminals  
and cable jacks.  
Whenever you connect an audio or video system to your  
television, ensure that all elements are switched off.  
Please be sure to match the color coded input terminals  
and cable jacks.  
Connecting to the RCA Input  
1
2
3
4
5
6
On-screen menu display  
Volume adjustment  
Channel selection  
Remote control sensor  
Standby indicator  
Power on/off  
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for  
equipment, such as a camcorder, video disc player, or video  
game device.  
1 Audio/Video Output Jacks  
Connect to the audio/video input jacks of a recording VCR.  
Connecting to the Headphones  
The 3 (headphone) jack is used for watching a television  
programme without disturbing the other people in the room.  
Prolonged use of headphones at a high volume may damage  
your hearing.  
2 Audio/Video Input Jacks  
Connect to the audio/video output jacks of VCRs, DVD players  
and similar devices.  
You can use the 3 buttons to switch the TV on when it is  
in standby mode depending on the model.  
The 2 and 3 buttons also have the same function as the  
◄/►/▲/▼ buttons on the remote control.  
If the remote control no longer works or you have  
misplaced it, you can use the controls on the panel of the  
television.  
3 Component Video Input Jacks (Y, PB, PR)  
Connect to the Component video outputs of a DVD or DTV  
set-top box. 480i video signal input is available.  
When using the Component Video input, connect audio jacks  
to “AV IN 2 (AUDIO-L/R)”.  
When both the front (or side) AV and rear connectors are  
connected to external equipment, the front (or side) AV  
receives priority.  
4 ANT IN  
Connect to an antenna or to a cable TV system.  
English - ꢀ  
AA68-03992B-00  
 
Setup - Plug & Play (depending on the model)  
Input - Source List (depending on the model)  
Source List  
When the TV is initially powered on, several basic customer  
settings proceed automatically and subsequently.  
The following settings are available.  
5
6
After all available channels  
are stored, the “Clock Set”  
is displayed.  
Press the ◄ or ► button to  
move to the hour or minute.  
Set the clock by pressing  
the ▲ or ▼ button.  
Source List  
You can switch between  
viewing signal from  
connected equipment, such  
as a VCR, DVD, set-top  
box, and the TV source  
(broadcast or cable).  
TV  
AVꢀ  
AV2  
Component  
Plug & Play  
Clock Set  
ꢀ2 : 00 am  
Press the POWER button on  
the remote control.  
Move  
Enter  
Skip  
Adjust  
Plug & Play  
The “Start Plug & Play.” is  
displayed. Press the ENTER  
button, then the “Check  
Move  
Enter  
Return  
Start Plug & Play.  
OK  
Press the SOURCE  
button on the remote control repeatedly to select the  
desired signal source.  
When you have finished,  
press the MENU button.  
The “Enjoy your watching.”  
is displayed.  
Enter  
Exit  
antenna input.” is displayed.  
Enjoy your watching.  
OK  
2
3
Press the ▲ or ▼ button to  
select the language, then  
press the ENTER button. The  
message “Check antenna  
input” is displayed.  
Plug & Play  
Plug & Play feature  
only work in the TV  
mode.  
Language  
English  
Español  
Português  
Français  
Move  
Enter  
Skip  
Re-setting the Plug & Play  
Method:  
MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play)   
ENTER  
Make sure that the antenna  
is connected to the TV.  
Press the ENTER button,  
then the “Auto Program” is  
displayed.  
Plug & Play  
Check antenna input.  
OK  
Setup  
Enter  
Skip  
Plug & Play  
Language  
Time  
: English  
: Off  
Caption  
Child Lock  
Blue Screen : On  
Plug & Play  
4
Press the ENTER button  
to start. The TV begins  
memorizing all available  
channels. Press the ENTER  
button to stop.  
Auto Program  
Air 3  
Move  
Enter  
Return  
3%  
Stop  
Enter  
Skip  
continued...  
English - 3  
 
Channel - Memorizing the Channels  
Channel - Fine Tune  
Sleep Timer  
Your TV can memorize and store all of the available channels  
for both “off-air” (antenna) and cable channels. After the  
The Fine Tuning function lets  
you manually adjust the TV’s  
tuner if you have difficulty tuning  
channels.  
Adjust the fine tuning by pressing  
the ◄ or ► button.  
To store the fine tuning setting  
in the TV’s memory, press the  
ENTER button.  
You can select a time period of  
between 30 and 180 minutes  
after which the TV automatically  
switches to standby mode.  
Press the SLEEP button on the  
remote control repeatedly until the  
appropriate time interval appears  
(any of the preset values from “30  
Min.” to “180 Min.”).  
Fine Tune  
Reset  
available channels are memorized, use the CH  
and CH  
P 3  
0
buttons to scan through the channels.  
This eliminates the need to change channels by entering the  
channel digits. There are three steps for memorizing channels:  
“Air/Cable”, “Auto Program” and “Add/Delete”.  
Move  
Adjust  
Save  
Return  
30 Min.  
Channel  
Air/Cable  
To reset the fine tuning to “0”, select ”Reset” by pressing the  
▲ or ▼ button, then press the ENTER button.  
Air/Cable  
:Air  
Before your TV can begin  
memorizing the available  
channels, you must specify  
the type of signal source  
that is connected to the TV  
(i.e., an antenna or a cable  
system).  
Auto Program  
Add/Delete  
Fine Tune  
Move  
Adjust  
Return  
Select “Air” or “Cable” by pressing the ◄ or ► button.  
Auto Program  
Search  
Setup - Time  
Setup - Caption (depending on the model)  
All available channels are  
automatically stored in  
Air 3  
Time  
3%  
Your TV decodes and displays  
the closed captions that are  
broadcast with certain TV shows.  
These captions are usually  
subtitles for the hearing impaired  
or foreign-language translations.  
All VCRs record the closed  
caption signal from TV programs,  
so home-recorded video tapes  
also provide closed captions. Most pre-recorded commercial  
video tapes provide closed captions as well. Check for the  
closed caption symbol in your TV schedule and on the tape’s  
packaging: CC .  
memory when channels are  
selected by the direct tuning  
function.  
Press the ENTER button  
at any time to interrupt the  
memorization process.  
Clock  
Setting the clock is  
Setup  
Clock  
-- : -- am  
-- : -- am Off  
-- : -- am Off  
Plug & Play  
Language  
Time  
Caption  
Child Lock  
Blue Screen : On  
On Timer  
Off Timer  
Stop  
: English  
: On  
necessary in order to use the  
various timer features of the  
TV. Also, you can check the  
time while watching the TV.  
(Just press the INFO button.)  
Enter  
Return  
Move  
Enter  
Return  
Move  
Enter  
Return  
Add/Delete  
Add/Delete  
You can add or delete  
a channel to display the  
channels you want only. To  
use the “Add/Delete” function,  
first run Auto Program.  
Select “Deleted” or “Added”  
by pressing the ENTER  
button.  
On Timer / Off Timer  
You can set the On/Off timers so that the TV will switch on  
▲ More  
2
3
4
5
6
: Added  
: Deleted  
: Deleted  
: Deleted  
: Deleted  
or off automatically at the time you select.  
You must set the clock first.  
▼ More  
Move  
Enter  
Return  
Auto Power Off  
Caption: On/Off  
You can activate or deactivate the “Caption” function.  
When you set the timer “On”, the TV will eventually turn  
off, if no controls are operated for 3 hours after the TV was  
turned on by timer. This function is only available in timer  
“On” mode and prevents overheating or leakages, which  
may occur if a TV is on for too long.  
Misspellings and unusual characters sometimes occur  
during closed caption transmissions, especially those of  
live events. There may be a small delay before captions  
appear when you change channels. These are not  
malfunctions of the TV.  
English - 4  
 
Setup - Child Lock  
Setup - Language / Blue Screen  
Picture - Mode  
(depending on the model)  
This feature allows you to  
Child Lock  
Mode:  
Child Lock  
Channel  
Lock  
: On  
: P ꢀꢀ  
: ?  
prevent unauthorized users,  
such as children, from watching  
unsuitable programmes by  
muting out video and audio. Child  
Lock cannot be released using  
front (or side) panel buttons.  
Only remote control can release  
Dynamic / Standard / Movie  
/ Custom  
You can select the type  
of picture which best  
corresponds to your viewing  
requirements.  
Mode  
Dynamic  
Language  
Mode  
:
:
:
:
:
:
Setup  
Contrast  
Brightness  
Sharpness  
Color  
ꢀ00  
50  
75  
It is variable depending on  
the model. When you start  
using the television for the  
first time, you must select the  
language which will be used  
for displaying menus and  
indications.  
Plug&Play  
Language  
Time  
: English  
: Off  
50  
R 50  
Caption  
Tint  
G 50  
: Coolꢀ  
Child Lock  
Blue Screen  
Colour Tone  
Move  
Enter  
Return  
: On  
Reset  
Move  
Enter  
Return  
the Child Lock setting, so keep the remote control away from  
children.  
Move  
Enter  
Return  
Contrast / Brightness /  
Sharpness / Color / Tint  
(NTSC only)  
The TV has several settings which allow you to control the  
picture quality.  
Child Lock : On/Off  
Blue Screen  
You can activate or deactivate the Child Lock function.  
Channel : Channel number to be locked.  
Lock : When press the ENTER button, the “Locked” is  
displayed.  
If no signal is being received or the signal is very weak,  
a blue screen automatically replaces the noisy picture  
background. If you wish to continue viewing the poor  
picture, you must set the Blue Screen to Off.  
Color Tone: Cool2 / Coolꢀ / Normal / Warmꢀ / Warm2  
You can change the color of the entire screen according to  
your preference.  
If any channel is locked, you can not access to the  
“Channel” and “Child Lock” menu by using the control  
buttons on the TV panel (the “Not Available” is displayed  
in the “Child Lock” menu). You can access by using the  
remote control only.  
Reset  
You can retum to the factory defaults.  
The reset function is set for each mode (Dynamic,  
Standard, Movie, or Custom).  
Picture - Digital NR / DNIe Jr  
(depending on the model)  
R.Surf Feature (depending on the model)  
This feature allows you to set  
the TV to return to a particular  
channel after a certain amount of  
time. For example, you may be  
watching a channel when  
Picture  
Dynamic  
Digital NR  
Mode  
Digital NR  
DNIe Jr  
:
:
:
If the signal received by  
the television is weak, you  
can activate this feature  
to reduce any static and  
ghosting that may appear on  
the screen.  
Off  
Off  
commercials start. You can set  
Surf  
00: 29  
the R.Surf to “5 minutes”, then  
switch channels. After minutes,  
the TV will return to the original  
channel.  
Move  
Enter  
Exit  
DNIe Jr  
If the signal received by the television is weak, you can  
activate this feature to reduce any static and ghosting that  
may appear on the screen.  
Press the R.SURF button on the remote control repeatedly to  
set the timer in thirty second intervals, up to five minutes.  
English - 5  
 
Sound - Mode / Adjust / Auto Volume /  
Troubleshooting  
Cleaning and Maintaining Your TV  
Turbo Sound (depending on the model)  
If the TV seems to have a problem, first try this list of possible  
problems and solutions. If none of these troubleshooting tips  
apply, then call your nearest Samsung authorized service center.  
Please follow the guidelines to get the maximum performance  
from your TV.  
Mode : Standard / Music /  
Movie / Speech / Custom  
You can select the type of  
special sound effect to be  
used when watching a given  
broadcast.  
Sound  
Mode  
Adjust  
Auto Volume  
Turbo Sound  
: Custom  
Placement  
Poor picture.  
: Off  
: Off  
Do not Place the TV near extremely hot, cold, humid or  
dusty places.  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Do not place TV near appliances with electric motor that  
create magnetic fields, such as vacuum cleaners.  
Keep the ventilation openings clear; do not place TV on a  
soft surface, such as cloth or paper.  
Move  
Adjust  
Return  
Poor sound quality.  
Adjust : Bass / Treble / Balance  
The television has several settings which allow you to  
control the sound quality.  
Place the TV in a vertical position only.  
Try another channel.  
Adjust the antenna.  
Liquids  
Do not handle liquids near or on the TV. Liquid that spills  
If you make any changes to these settings, the sound  
mode is automatically switched to “Custom”.  
No picture or sound.  
into it can cause serious damage.  
Try another channel.  
Auto Volume  
Press the SOURCE button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
Make sure the MUTE button is off.  
Cabinet  
Each broadcasting station has its own signal conditions,  
and so it is not easy to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is low.  
Never open the cabinet or touch the parts inside.  
Wipe your TV with a clean, dry cloth. Never use water,  
cleaning fluids, wax or chemicals.  
Do not put heavy objects on top of the cabinet.  
No color, wrong colors or tints.  
Temperature  
If your TV suddenly move from a cold to a warm place,  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
Turbo Sound  
This feature suitably emphasizes both higher and lower  
bands of sound (and includes other effects). You can enjoy  
more magnificent and dynamic sound when watching  
music, movie, or other channels.  
unplug the power cord and allow at least two hours for  
moisture that may have formed inside the unit to dry  
completely.  
Picture rolls vertically.  
Adjust the antenna.  
Check all wire connections.  
If you are using a VCR, check the tracking.  
Using Your TV in Another Country  
If you plan to take the TV with you to a foreign country  
please be aware of a different television systems that  
are in use around the world. A TV designed for one  
system may not work properly with another system due to  
differences in the TV channel frequencies.  
The TV operates erratically.  
Unplug the TV for 30 seconds, then try operating it again.  
Your remote control does not operate your TV.  
Make sure the remote has batteries.  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Note: Main plug serves as the disconnect device during  
servicing and shall be readily operable.  
Sound - MTS (Multi-channel Television Sound)  
(depending on the model)  
Check that the batteries are drained.  
The TV won’t turn on.  
Depending on the particular  
program being broadcast,  
you cannot listen to “Mono” or  
“Stereo”.  
AV  
Mono  
Make sure the wall outlet is working.  
Make sure the TV is plugged in.  
Make sure the remote has batteries.  
Only when the TV is set in AV  
mode, press the MTS button on  
the remote control repeatedly  
to select “Stereo”, “Mono”, or  
“SAP(Secondary Audio Program).  
Remote control malfunctions  
Replace the remote control batteries.  
Clean the upper edge of the remote control (transmission  
window).  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Check that the batteries are drained.  
English - 6  
 
OSD Map  
: It is variable depending on the model.  
Important Warranty Information  
Regarding Television Format Viewing  
Input  
– Source List ✽  
– TV / AVꢀ / AV2 / Component  
Standard screen format televisions (4:3, the aspect ratio of the  
screen width to height) are primarily designed to view standard  
format full-motion video. The images displayed on them should  
primarily be in the standard 4:3 ratio format and constantly  
moving. Displaying stationary graphics and images on screen,  
such as the dark top and bottom letterbox bars (wide screen  
pictures), should be limited to no more than 15% of the total  
television viewing per week.  
Picture  
– Mode  
– Mode  
Contrast  
Brightness  
Sharpness  
Color  
Tint (NTSC only)  
Color Tone  
Reset  
– Off / On  
– Off / On  
– Dynamic / Standard / Movie / Custom  
– Cool2 / Coolꢀ / Normal / Warmꢀ / Warm2  
Wide screen format televisions (16:9, the aspect ratio of  
the screen width to height) are primarily designed to view  
wide screen format full-motion video. The images displayed  
on them should primarily be in the wide screen 16:9 ratio  
format, or expanded to fill the screen if your model offers this  
feature, and constantly moving. Displaying stationary graphics  
and images on screen, such as the dark side-bars on non-  
expanded standard format television video and programming,  
should be limited to no more than 15% of the total television  
viewing per week.  
– Digital NR  
– DNIe Jr ✽  
Sound ✽  
– Mode  
– Adjust  
– Auto Volume  
– Turbo Sound  
– Standard / Music / Movie / Speech / Custom  
– Bass / Treble / Balance  
-
Off/On  
– Off / On  
Additionally, viewing other stationary images and text such as  
stock market reports, video game displays, station logos, web  
sites or computer graphics and patterns, should be limited as  
described above for all televisions. Displaying any stationary  
images that exceed the above guidelines can cause  
uneven aging of picture tubes (CRTs) that leave subtle,  
but permanent burned-in ghost images in the television  
picture. To avoid this, vary the programming and images,  
and primarily display full screen moving images, not  
stationary patterns or dark bars. On television models that  
offer picture sizing features, use these controls to view the  
different formats as a full screen picture.  
Channel  
Setup  
– Air/Cable  
– Air / Cable  
– Auto Program  
– Add/Delete  
– Fine Tune  
– Added / Deleted  
– Plug & Play  
– Language ✽  
– Time  
– English / Español / Portugues / Français  
– Clock  
– On Timer  
– Off Timer  
– Off/On  
– Child Lock  
– Channel  
– Lock  
– Caption ✽  
– Child Lock  
Be careful in the selection and duration of television formats  
used for viewing. Uneven CRT aging as a result of format  
selection and use, as well as other burned-in images, is not  
covered by your Samsung limited warranty.  
– Blue Screen  
– Off / On  
Viewing screen size : 508mm  
English - 7  
 
This page is intentionally  
left blank.  
 

QSC Audio Stereo Amplifier GX3 300 User Guide
Quantum Tool Storage 241 User Guide
Radica Games Snowshoes 74023 User Guide
Razor Mobility Scooter Bistro 15130640 User Guide
RCA Flat Panel Television PHD50300 User Guide
RCA Marine Battery AH630R User Guide
Reliable Network Router DL 04 User Guide
Samsung Graphics Tablet SAMSUNG SM T337A User Guide
Sceptre Technologies Flat Panel Television Sceptre X42 User Guide
Scientific Atlanta Network Card DPR300 Series User Guide