Salton Coffeemaker JVPM1B User Guide

READ AND SAVE THESE INSTRUCTIONS  
Pod Coffee Maker  
 
ADDITIONAL IMPORTANT  
SAFEGUARDS  
WARNING: This appliance generates heat and escaping steam  
during use. Use proper precautions to prevent the risk of burns,  
fires, or other injury to persons or damage to property.  
• All users of this appliance must read and understand this  
Owner’s Manual before operating or cleaning this appliance.  
• The cord to this appliance should be plugged into a 120V AC  
electrical outlet only.  
• Use water only in this appliance! Do not put any other liquids or  
food products in this appliance. Do not mix or add anything to the  
water placed in this appliance, except as instructed in the User  
Maintenance Instructions to clean the appliance.  
• DO NOT attempt to move an appliance containing hot liquids.  
Allow appliance to cool completely before moving.  
• Keep appliance at least 4 inches away from walls or other objects  
during operation. Do not place any objects on top of appliance  
while it is operating. Place the appliance on a surface that is  
resistant to heat.  
• If this appliance begins to malfunction during use, immediately  
unplug the cord. Do not use or attempt to repair the malfunc-  
tioning appliance.  
• If this appliance falls or accidentally becomes immersed in water  
or any other liquid, unplug immediately. Do not reach into the  
water! Do not use this appliance after it has fallen into or  
has become immersed in water. Contact Consumer Service  
for examination and repair.  
• Do not leave this appliance unattended during use.  
• Always use fresh, cool water in your coffee maker. Warm water  
or other liquids, except as listed in cleaning section, may cause  
damage to the appliance.  
 
3
POLARIZED PLUG: This appliance has a polarized plug, (one  
blade is wider than the other). To reduce the risk of electric shock,  
this plug is intended to fit into a polarized outlet only one way. If  
the plug does not fit fully in the outlet, reverse the plug. If it still does  
not fit, contact a qualified electrician. Do not attempt to modify the  
plug in any way.  
SHORT CORD INSTRUCTIONS: A short power supply cord is pro-  
vided to reduce the risk resulting from becoming entangled in or  
tripping over a longer cord.  
Do not use an extension cord with this product.  
ELECTRIC POWER: If the electric circuit is overloaded with other  
appliances, your appliance may not operate properly. It should be  
operated on a separate electrical circuit from other appliances.  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER-  
SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE BY  
AUTHORIZED SERVICE PERSONNEL ONLY.  
CAUTION: To prevent Plasticizers from migrating from the finish of  
the countertop or tabletop or other furniture, place NON-PLASTIC  
coasters or placemats between the appliance and the finish of the  
countertop or tabletop.  
Failure to do so may cause the finish to darken, permanent  
blemishes may occur or stains can appear.  
 
4
Your product may vary slightly from illustration.  
Parts Identification  
Pod  
(To order, see page 14.)  
Lever  
Pod Holder  
(P/N 31159B,  
31159W)  
Lid  
Water  
Diffuser  
Pod Chamber  
(P/N 31163)  
Adjustable Brew Spout  
Water  
(P/N 31156B, 31156W)  
Tank  
(P/N 31160)  
Drip Tray  
(P/N 31157)  
Over Flow Tray  
(P/N 31158B,  
31158W)  
Base  
Control Panel  
FIGURE 1  
Power Light/  
Indicator Button  
5-ounce Serving  
8-ounce Serving  
FIGURE 2  
 
5
Before UsingYour  
Pod Coffee Maker  
Become familiar with all parts of the appliance.  
Keep your Pod Coffee Maker clean  
Clean and descale your Pod Coffee Maker on a regular basis. See  
“Cleaning and Descaling”, pages 11-12. We recommend cleaning  
the Water Tank and the Adjustable Brew Spout as well as the Pod  
Holder and Pod Chamber, before using for the first time. Turn on  
the machine for a full cycle using water only by following steps 1-9.  
IMPORTANT: THE MACHINE WILL NOT FILTER COFFEE UNLESS  
THE PUMP HAS BEEN PRIMED.  
1. Remove the Water Tank by pulling out and then up to remove  
from the Base, see Figure 3.  
FIGURE 3  
 
6
2. Fill the Water Tank with fresh water up to the ‘Max’ line, and fit  
back into the Base (down and in) until it “snaps” into place, see  
Figure 4.  
FIGURE 4  
3. Lift Lid by pulling out on the Lever.Top will pop up. Push back so  
Lid is in fully raised position, see Figure 5.  
FIGURE 5  
4. Place the Adjustable Brew Spout inside the coffee maker.  
 
7
5. Make sure the mouth of the Pod Chamber is inside the Adjustable  
Brew Spout. Do not place a coffee pod in chamber. See Figure 6.  
FIGURE 6  
6. Place the Pod Holder so it sits securely on top of the Pod  
Chamber, see Figure 7.  
FIGURE 7  
7. To close the Lid, press down firmly on the top of the Lid and  
hold in place while pushing the Lever back so it is flush with the  
Lid and locks into place, see Figure 7.  
8. Place a cup or mug below the Adjustable Brew Spout to collect  
the water.  
NOTE: Adjustable Brew Spout is always in “relaxed” position  
unless forced up by a tall mug.  
 
8
9. Press the Power Light/Indicator Button to turn power on, then  
simultaneously press the 5-Ounce Serving and 8-Ounce Serving  
Buttons, see Figure 8.  
FIGURE 8  
The water from the WaterTank will cycle through the coffee maker.  
NOTE: If unit goes unused for 3 or more days, please repeat  
above process (steps 1-9).  
CAUTION: Do not immerse cord, plug or machine in water or  
other liquid.  
Brewing Coffee  
CAUTION: Before Brewing in your coffee maker for the first  
time, complete the steps listed under “Before Using Your Pod  
Coffee Maker” on pages 6-9 to ensure your machine functions  
properly.  
1. Fill the Water Tank with water up to the ‘MAX’ line. Never pour  
other liquids such as milk or hot water into the Water Tank. A  
full tank will yield about 7 5-oz. servings or 4 8-oz. servings of  
coffee.  
2. Press the Power Light/Indicator Button.The indicator light will  
flash while the water heats up. Heating will take approximately  
12 minutes.  
3. To open the Lid, place one finger behind Lever and pull out.  
Gently raise Lid to open position.  
4. Place the Adjustable Brew Spout inside the coffee maker.  
5. Place the empty Pod Holder inside the Pod Chamber, see  
Figure 7.  
 
9
6. Place one coffee pod inside the Pod Holder. Press lightly on the  
coffee pod to make sure it sits evenly in the Pod Holder. See  
Figures 9 and 10 for correct pod insertion.  
CAUTION: Use only pre-measured coffee pods in your Pod  
correct  
incorrect  
FIGURE 9  
FIGURE 10  
Coffee Maker. The use of loose ground coffee may result in  
inferior coffee, cause overflow and could possibly damage the  
machine.  
CAUTION: Never use torn coffee pods as this could clog the  
machine and damage it. Each coffee pod is pre-portioned with  
the optimal amount of coffee required per cup.  
7. To close the Lid, press down firmly on the top of the Lid and hold  
in place while pushing the Lever back so it is flush with the Lid  
and locks into place.  
8. Place a mug or cup under the Adjustable Brew Spout. The cup  
should hold at least 7 to 10 ounces, depending on your  
selection.  
9. When the indicator light stops flashing, the coffee maker is  
ready to use. If the indicator light flashes at rapid intervals, see  
Troubleshooting on page 13.  
10. Select the amount of coffee you wish to brew: either a 5 ounce  
serving or an 8 ounce serving.The machine will begin the brew-  
ing process. At the beginning of the brewing cycle, a small amount  
of water is dispersed to pre-moisten the pod to ensure full extrac-  
tion. Following a short pause, the machine will brew for about 50  
seconds. You can manually stop the brewing process at any  
time by pressing the Power Button.  
CAUTION: Dripping may occur between brewing cycles.  
11. Dispose of the coffee pod after use by removing the Pod Holder  
from the Pod Chamber and emptying it. Do not use a pod more  
than once. Repeated use may cause the pod to burst and result  
in weak and inferior coffee.  
Note: Regular rinsing of the Pod Holder will optimize the flavor of  
the beverage.  
 
10  
You may leave your coffee maker on if you intend to brew another  
cup of coffee.The coffee maker will turn off automatically after one  
hour.  
Helpful Hints for Brewing  
Fresh Water  
For optimal results, use fresh water daily. If you haven’t used your  
machine for a few days, follow steps 1-9 in section “Before Using  
Your Pod Coffee Maker” on pages 6-9.  
Note: If Water Tank becomes dry for 3 or more days, you must re-  
prime the pump. See “Before Using Your Pod Coffee Maker,”  
steps 1-9.  
Coffee Pods  
Remember to remove pods after use. If a pod is left inside the  
machine for some time, remove it and wash the Pod Holder before  
attempting to brew coffee.  
Use only pre-measured coffee pods in your Pod Coffee Maker.  
The use of loose ground coffee may result in inferior coffee, cause  
overflow and could possibly damage the machine.  
Never use torn coffee pods as this could clog the machine and dam-  
age it. Each coffee pod is pre-portioned with the optimal amount of  
coffee required per cup.  
Care and Cleaning  
CAUTION: Do not immerse cord, plug or machine in water or other liquid.  
1. Always unplug the appliance before cleaning.  
2. Clean the outer surface of the unit and the Water Diffuser with a  
damp cloth.  
3. Remove the Pod Holder, Pod Chamber and Adjustable Brew  
Spout.  
 
11  
4. Remove the Drip Tray and Overflow Tray, see Figure 11.  
FIGURE 11  
5. Clean the Water Tank, Pod Holder, Pod Chamber, Adjustable  
Brew Spout, Drip Tray and Overflow Tray with hot water. If nec-  
essary, use a little dish soap.  
Note: The Pod Holder, the Drip Tray, Overflow Tray and the  
Adjustable Brew Spout may be washed in the dishwasher (top  
shelf only).The top part of the tank can be removed for thorough  
cleaning. Do not place the Water Tank in the dishwasher.  
6. Rinse all parts with fresh water after cleaning.  
Note: Do not try to dry the inside of the Removable Water Tank  
with a cloth because this could leave a residue of lint and may  
clog your coffee maker.  
Descaling  
Regular descaling will extend the service life of your machine and  
ensure optimal results over time.  
1. Follow the instructions given in “Before Using Your Pod Coffee  
Maker,” pages 6-9, replacing one fourth of the water with  
white vinegar.  
2. Brew 3, 8-oz. cups using empty Pod Holder (follow the Brewing  
Instructions on page 9.)  
3. Remove Water Tank, Pod Holder, Pod Chamber and Adjustable  
Brew Spout and wash thoroughly.  
4. Repeat instructions in step 2 up to four times in order to flush  
vinegar residue. Empty Water Tank and refill with fresh water  
after each cycle.  
Note:You may also use a cleaner designed for automatic drip  
coffee makers. Simply follow the instructions as stated on the  
package.  
 
12  
Troubleshooting  
Should a problem occur, you may be able to find an answer in the  
text below. If the text proves unhelpful or if you require further  
information, please contact Consumer Service.  
1. The coffee is too weak.  
Check the following:  
• the pod is placed properly in the Pod Holder.You may need  
to lightly press it down into the holder.  
correct  
incorrect  
FIGURE 12  
• you have selected the correct button according to the number  
of ounces and strength desired. Use one coffee pod for either  
one 5-ounce, bold European serving, or an 8-ounce serving  
of American-style coffee.  
• you are using a fresh coffee pod.  
2. The coffee is too strong.  
Check that you have selected the correct button. Use the  
8-ounce button for less robust coffee.  
3. There is less water than normal used during brew cycle.  
Tank may be empty. Refill and brew again.  
• Descale appliance. See “Descaling,page 12.  
4. Water drips from the coffee maker.  
Note: Some water may drip between cycles, this is normal.  
If dripping seems excessive, check the following:  
• the Pod Holder must be placed properly within the Pod Cham-  
ber and the Lever locked into position.  
• the Water Tank must not be filled above the ‘MAX’ line.  
• the Pod Holder may be clogged. Rinse under tap water to  
unclog the screen. If necessary, you may also use a scrubbing  
brush or a pin to unclog holes.  
• the pod must be properly placed so it sits evenly in the holder.  
Lightly tap it down into the holder. See Figure 9.  
• some water droplets on your countertop are normal and may  
be caused by the filling and replacing of the Water Tank.  
 
13  
5. The indicator light is flashing.  
A flashing indicator light means the machine is heating. This  
normally lasts for 12-2 minutes. If indicator light is flashing  
rapidly (more than a second apart), see #6 below.  
If the indicator light flashes continually for more than 4 minutes,  
contact Consumer Service.  
6. The indicator light keeps flashing at rapid intervals.  
Check the following:  
• the Water Tank must be inserted properly inside the coffee  
maker.  
• there must be enough water in the Water Tank. Fill the Water  
Tank to the “Max” fill line.  
• the appliance may require cleaning. See “Before Using Your  
Pod Coffee Maker”, pages 6-9.  
• room temperature must be above 40°F.  
7. The Lid will not open.  
Turn coffee maker off. Unplug coffee maker. Wait for appliance  
to cool completely (about 30 minutes) and try opening Lid  
again. Clean all removable parts (Adjustable Brew Spout, Pod  
Holder, Pod Chamber) as described on pages 11-12.  
For any other problem please contact Consumer Service,  
1-800-577-1557 or email us at [email protected].  
To Order Coffee Pods  
It’s easy to order pods. Just log onto our dedicated website,  
To order by phone, call toll-free, 1-800-577-1557.  
Coffee pods are also available at Target and other retail outlets that  
carry the Pod Coffee Maker.  
 
14  
IMPORTANT NOTICE  
If any parts are missing or defective,  
DO NOT return this product.  
Please call our Customer Service Department for assistance.  
800-577-1557 Monday - Friday 9:00 am - 5:00 pm CST  
Thank You  
LIMITED ONEYEAR WARRANTY  
Warranty: This product is warranted by Salton, Inc. to be free from defects  
in materials or workmanship for a period of (1) year from the original purchase  
date. This product warranty covers only the original consumer purchaser of  
the product.  
Warranty Coverage: This warranty is void if the product has been damaged by  
accident in shipment, unreasonable use, misuse, neglect, improper service,  
commercial use, repairs by unauthorized personnel, normal wear and tear,  
improper assembly, installation or maintenance abuse or other causes not aris-  
ing out of defects in materials or workmanship.This warranty is effective only if  
the product is purchased and operated in the USA, and does not extend to  
any unit which has been used in violation of written instructions furnished with  
the product, or to units which have been altered or modified, or to damage to  
products or parts thereof which have had the serial number removed, altered,  
defaced or rendered illegible.  
Implied Warranties: ANY IMPLIED WARRANTIES WHICH THE PUR-  
CHASER MAY HAVE ARE LIMITED IN DURATION TO ONE (1)YEAR FROM  
THE DATE OF PURCHASE. Some states do not allow limitations on how long  
an implied warranty lasts, so the above limitation may not apply to you.  
Warranty Performance: During the above one-year warranty period, a prod-  
uct with a defect will be either repaired or replaced with a reconditioned com-  
parable model (at our option) when the product is returned to the Repair Center,  
or the purchase price refunded.The repaired or replacement product will be in  
warranty for the balance of the one-year warranty period and an additional one-  
month period. No charge will be made for such repair or replacement.  
Service and Repair: Should the appliance malfunction, you should first call  
toll-free 1-800-577-1557 between the hours of 9:00 am and 5:00 pm Central  
Standard Time and ask for CONSUMER SERVICE stating that you are a con-  
sumer with a problem. Please refer to model number JVPM1B or JVPM1W when  
you call.  
In-Warranty Service (USA): For an appliance covered under the warranty  
period, no charge is made for service or postage. Call for return authorization  
1-800-577-1557.  
 
15  
Out-of-Warranty Service: A flat rate charge by model is made for out-of-war-  
ranty service. Include $12.00 (U.S.) for return shipping and handling. We will  
notify you by mail of the amount of the charge for service and require you to  
pay in advance for the repair or replacement.  
For products purchased in the USA, but used in Canada:You may return  
the product insured, packaged with sufficient protection, and postage and  
insurance prepaid to the USA address listed below. Please note that all cus-  
toms duty / brokerage fees, if any, must be paid by you and we will require you  
to pay the cost of customs duty / brokerage fees to us in advance of our per-  
forming any service.  
Risk During Shipment: We cannot assume responsibility for loss or dam-  
age during incoming shipment. For your protection, carefully package the  
product for shipment and insure it with the carrier. Be sure to enclose the fol-  
lowing items with your appliance: any accessories related to your problem,  
your full return address and daytime phone number, a note describing the  
problem you experienced, a copy of your sales receipt or other proof of pur-  
chase to determine warranty status. C.O.D. shipments cannot be accepted.  
To return appliance, ship to:  
To contact us, please write to, call or email:  
Attn: Repair Center  
Salton, Inc.  
708 South Missouri Street  
Macon, MO 63552  
Salton, Inc.  
P.O. Box 6916  
Columbia, MO 65205-6916  
1-800-577-1557  
Limitation of Remedies: No representative or person is authorized to  
assume for Salton, Inc. any other liability in connection with the sale of our  
products. There shall be no claims for defects or failure of performance or  
product failure under any theory of tort, contract or commercial law including,  
but not limited to negligence, gross negligence, strict liability, breach of war-  
ranty and breach of contract. Repair, replacement or refund shall be the sole  
remedy of the purchaser under this warranty, and in no event shall Salton, Inc.  
be liable for any incidental or consequential damages, losses or expenses.  
Some states do not allow the exclusion or limitation of incidental or conse-  
quential damages, so the above limitation or exclusion may not apply to you.  
Legal Rights: This warranty gives you specific legal rights, and you may also  
have other rights which vary from state to state.  
For more information on Salton products:  
© 2004 Salton, Inc.  
All Rights Reserved  
P/N 67601  
Printed in China  
 

Q See Security Camera QSDT304C2 User Guide
Quatech Server 80211B G User Guide
RCA Portable Speaker RP 7983 User Guide
Ricoh Printer GX7000 User Guide
Rosewill Switch RHUB 200 User Guide
Samsung Cell Phone A640 User Guide
Sanyo Cell Phone SCP 6600 User Guide
Sanyo Vacuum Cleaner SC JS2B User Guide
Sears Portable Generator 20071987 User Guide
SECO LARM USA Door E 941SA 1K2PQ User Guide