SECO LARM USA DVR DR 104Q User Guide

DR-1 Series  
H.264 Pentaplex Network DVR  
Quick Setup Guide*  
DR-116Q shown  
No. of Channels  
4
Pictures Per Second  
DR-104Q  
DR-108Q  
DR-116Q  
120  
240  
240  
8
16  
Easy recording and setup.  
BNC and VGA outputs.  
Remote LAN and Web viewing.  
iPhone/Smart phone compatible.  
Per-event recording and search.  
Programmable motion detection.  
Multi-channel audio recording.  
Free DDNS server.  
*For more installation tips, consult the User’s Manual on the CMS Software CD included with this product,  
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.  
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Front Panel:  
1
2
3
4
5
6
7
8
ENFORCER®  
REC  
IR  
H.264  
16 Channel  
DOME  
IRIS OPEN FOCUS (+)  
TELE  
16 Channel  
ESC  
1
2
3
4
5
6
7
8
ZOOM/  
ENTER  
MODE  
SEQ  
MENU  
PLAY/STOP FREEZE  
EZ COPY  
SEARCH  
9
10  
11  
12  
13  
14  
15  
16  
IRIS CLOSE FOCUS (-)  
WIDE  
Multi-functional Keypad  
18  
17 15 13 11  
16 14 12 10  
9
DR-116Q shown.  
Front panel feature descriptions:  
1. Press any button to view the corresponding channel in full mode on the main  
screen. Press MODE (14) to return to other views.  
2. Channel selection keys are used as a keypad to input numbers when entering  
Channel  
selection  
buttons  
1
passwords, etc.  
3. In PTZ Mode, press Channel 1 to enter the Set/Go preset menu. Press  
Channel 2 to show or hide the PTZ settings menu.  
2
3
4
5
6
7
Power LED  
Alarm LED  
Network LED  
Record LED  
IR sensor  
ON when DVR power is on.  
ON during any alarm event.  
ON when the Ethernet connection is transmitting.  
ON when recording is in progress.  
Receives commands from the IR Remote.  
Cancels the current operation or returns to the previous menu or screen.  
Escape  
1. Moves the viewable screen area when using zoom.  
2. Moves the cursor when navigating menus.  
8
Arrow buttons  
Zoom/Enter  
1. Toggles 2x Zoom ON/OFF for present/last channel when viewing the main screen.  
2. Chooses the selected menu or confirms the present setting.  
9
1. Enters the system menu.  
2. PTZ function: Zooms in to enlarge a certain area.  
1. Opens the search menu to search for recorded video by date/time or event.  
2. PTZ function: Zooms out to show a larger area.  
1. Activates the Sequence feature when viewing the main screen.  
2. PTZ function: Changes focus to a closer point.  
1. Freezes the current view when viewing the main screen.  
2. PTZ function: Changes focus to a farther point.  
1. Selects full-screen or multiple-window display.  
2. PTZ Function: Opens camera iris.  
10  
11  
12  
13  
14  
15  
Menu/Tele  
Search/Wide  
Seq/Focus (+)  
Freeze/Focus (-)  
Mode/Iris Open  
Play/Stop /  
Iris Close  
1. Plays or stops the video when viewing recorded material.  
2. PTZ Function: Closes camera iris.  
16  
17  
18  
Dome  
EZ Copy  
USB 2.0 Port  
Enters PTZ control mode.  
Marks start and end time when exporting video.  
Provides connection point for USB flash drive, mouse, or other USB device.  
SECO-LARM U.S.A., Inc  
3
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Rear Panel:  
DR-104Q:  
1
3
5
9
11  
12  
2
4
6
10  
DR-108Q / DR-116Q: (DR-116Q shown)  
1
3
10  
8
7
9
11 12  
2
4
6
5
Rear panel feature descriptions:  
1
LAN 10/100M (RJ-45) Use a Cat5e/6 cable to connect the DVR to a Local Area Network for remote access.  
Provides connection point for a PS2-compatible USB mouse.  
PS2-Compatible  
2
Note: PS2-compatible USB port does not support USB mice, flash drives, or  
USB Port  
other USB devices.  
3
4
VGA Output  
Allows the DVR to output to a computer monitor or other VGA device.  
Allows the DVR to connect to alarm I/O and other RS-485 devices.  
Alarm I/O Input  
Video Out /  
Main Monitor  
Audio Out/  
Main Audio  
5
6
Allows the DVR to output a video signal to a security monitor using a coaxial cable.  
Allows the DVR to output an audio signal to an audio device using an RCA cable.  
Allows the DVR to output a video signal to a secondary monitor using a  
coaxial cable. (DR-108Q and DR-116Q)  
Allows the DVR to output an audio signal to a secondary audio input device using an  
RCA cable. (DR-108Q and DR-116Q)  
7
8
Call Monitor  
Call Audio  
9
Video Input  
Audio Input  
Provides a connection point for video streams from cameras using coaxial cables.  
Provides a connection point for audio sources.  
10  
11  
12  
Power Jack  
Ground Screw  
Connect a 12VDC power source.  
Connect to earth ground to prevent electrical damage to DVR.  
4
SECO-LARM U.S.A., Inc  
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Getting Started:  
Connections:  
1. Connect cameras to the BNC channel inputs on the rear of the device.  
2. Connect a VGA-capable display to the VGA port on the rear of the device.  
3. If connection to a Call Monitor is desired, connect via the BNC port marked Call Monitor Out  
on the rear of the device.  
4. If network access to the DVR is desired, connect the DVR to a Local Area Network (LAN)  
using a Cat5e/6 cable with an RJ-45 connector.  
5. If using a mouse to operate the DVR On-Screen Display, connect a standard USB mouse  
via the USB port on the front of the device. For PS2-compatible USB mice, connect to the  
PS2-compatible USB port on the rear of the device.  
6. When all connections have been made, plug the included power adapter into a 110~240 VAC  
power outlet. Connect the adapter to the power input on the rear of the device.  
Note: To avoid possibility of data loss, never unplug the adapter before properly shutting  
down the device. For more information see the section Shutting Down the DVR on page 11.  
Initial System Setup:  
1. To enter the system menu, press MENU on the devices front panel or remote control, or if  
using a mouse, right click when viewing the main screen and select the Menu icon  
2. Enter the administrator username and password.  
.
IMPORTANT: FOR SECURITY PURPOSES, CHANGE THE PASSWORD IMMEDIATELY  
AFTER ENTERING THE MENU FOR THE FIRST TIME. FAILURE TO DO SO MAY  
SERIOUSLY COMPROMISE THE SECURITY OF THE SYSTEM.  
Note: Default username: admin Default password: 1234.  
Note: Username is case sensitive.  
3. To change the system password:  
a. Enter the system menu following steps 1 and 2 above.  
b. Select the System Setup icon  
a mouse to left click the icon.  
c. Select User Management.  
using the left/right buttons and press ENTER, or use  
d. For the first account, admin, select Edit in the column marked PWD. Enter a new 4~8  
digit password. Note: admin account ID cannot be changed. Choose a password that is  
memorable but not easily guessed by others.  
e. For the second account, user, select Edit in the column marked ID. Enter a new name, if  
desired. When finished select OK. Next, select Edit in the column marked PWD. Enter a  
new 4~8 digit password as described in part d. above.  
f. By default there are only two user accounts active. If other accounts are added, be sure  
to change the password to ensure the security of the system. See the Users Manual  
section 3.2.1 User Management for details on how to add and edit user accounts.  
SECO-LARM U.S.A., Inc  
5
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Continued from page 5  
4. To adjust the time and date:  
Note: Changes to time and date settings may cause inconsistency or data loss in previously  
recorded material. Back up all data before making changes. For more information on how  
to back up data, please see Exporting Video on pg. 11 of this guide.  
a. Enter the system menu and select System Setup  
.
b. Select Date/Time.  
c. Select Date. The year will flash. Press the up/down arrows on the device front panel or  
remote control, or scroll up and down with the mouse scroll wheel. Repeat for month and  
day settings.  
d. Select Time. Adjust the time in the same manner as described in part c. above.  
e. Select Time Zone. Adjust the time difference to match the UTC (Coordinated Universal  
Time) offset in your area. For example, Los Angeles is 8 hours behind UTC, so the UTC  
offset is -8:00.  
f. For other features such as Daylight Saving Time and Network Time Protocol please see  
the Users Manual section 3.4 System Date / Time Setting.  
5. To adjust the system language:  
a. Enter the system menu and select System Setup  
.
b. Select Language. Press the up/down arrows on the device front panel or remote control,  
or scroll up and down with the mouse scroll wheel. The language will change immediately.  
Press ENTER or left click to confirm your selection, or press ESC or right click to keep the  
previous language setting. There are 23 different language options.  
Basic Network Setup:  
1. Enter the system menu and select System Setup  
network via an Ethernet cable.  
. Be sure the DVR is connected to a  
2. Select Network Setup.  
a. Select LAN Select. If the DVR connects to a local area network, choose LAN (default).  
b. If the DVR connects directly to the internet, choose PPPoE. PPPoE users must configure  
the following options: PPPoE Account, PPPoE Password, and PPPoE Max Idle.  
c. If a connection to a network is not desired, choose None. The DVR will still record data.  
d. If a connection to a network is desired, it may be necessary to adjust LAN settings via the  
LAN Setup menu (Network SetupLAN Setup). Contact your network administrator for  
details about your network.  
e. To connect to a network based on DHCP, set the DHCP to ON. The IP address, Netmask,  
Gateway, and DNS setting will be retrieved from network servers.  
f. For non-DHCP users, set DHCP to OFF. Enter an IP address, Netmask, Gateway, and  
DNS settings. This information may be obtained from the network service provider.  
3. Press ENTER or left click to confirm your selections, or press ESC or right click to cancel.  
6
SECO-LARM U.S.A., Inc  
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Connecting a PTZ (Pan / Tilt / Zoom) Camera  
Note: For pin configurations, please see Pin Connection for Alarm I/O & RS-485 and Audio In  
on page 12 of this guide.  
1. Make sure the RS-485 connector from the PTZ camera is configured correctly. See pg. 12.  
2. Connect the PTZ camera’s RS-485 cable to the DVR’s Alarm I/O input.  
3. Press MENU to access the OSD main menu and select Camera Setup.  
a. Select Dome Protocol to choose the corresponding protocol.  
b. Select Dome ID to choose an ID number. The ID number must match the ID address  
defined by the PTZ camera.  
4. Select System Setup  
from the OSD main menu, and then select RS485 Setup to  
configure the RS-485 parameters.  
5. For instructions on how to control the PTZ camera’s functions, please see the User’s Manual  
section 4.5 Dome Control.  
Viewing:  
The main screen shows live data from cameras connected to the DVR.  
1. Display Modeswhen viewing the main screen, scan through the modes by pressing the MODE  
button on the front panel/remote. Using the mouse, right click when viewing the main screen and  
choose . See each mode description below for further instructions.  
a. Full screenshows one channel. Access this view by pressing a channel button on the front  
panel/remote, or left clicking any channel image (left click to return to all-channel view).  
b. Tile 2x2Channels 1~4 will display first, followed by 5~8, 9~12 and 13~16. Using the  
mouse, right click the main screen and choose . Repeat to choose the next set of  
channels. (No. of channels available depends of the model).  
c. Tile 3x3 (DR-108Q and DR-116Q only)DR-108Q will display all channels 1~8. DR-116Q  
will display channels 1~9 first, followed by 8~16. Using the mouse, right click the main  
screen and choose . Repeat to choose the next set of channels.  
d. Tile 4x4 (DR-116Q)shows all 16 channels. Using the mouse, right click the main screen  
and choose  
.
e. SequenceDVR will automatically cycle through the channels.  
i. Press the SEQ button on the front panel/remote. Using the mouse, right click the main  
screen and choose  
.
ii. The DVR will scan through all channels using the current display mode. For example, in  
the Full Screen mode, the DVR will scan through each channel in full screen. In Tile 4x4  
mode, the DVR will scan through channels, displaying 4 at a time (1~4, 5~8, etc).  
2. Freezefreezes images on the present screen. From the main screen, press FREEZE on the  
front panel/remote. Using the mouse, right click the main screen and choose  
.
3. Quick Zoomzooms the screen 2x.  
a. When viewing the main screen press ENTER on the front panel/remote. Using the mouse,  
right click the main screen and choose . Press ENTER or right click to zoom out.  
SECO-LARM U.S.A., Inc  
7
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Continued from page 7  
b. For Full Screen mode, present channel will zoom. For other modes, the last selected  
channel will zoom.  
c. Pan up/down/left/right using the front panel/remote or onscreen (for mouse) arrow buttons.  
4. Certain icons will appear on screen while in any display mode. Please refer to the following  
chart for descriptions:  
Icon Description  
The DVR is in playback mode.  
On-Screen Position  
Lower left-hand corner  
Upper right-hand corner  
Upper right-hand corner  
Bottom and centered  
A user is not logged in.  
The number displayed is the user’s authority level.  
The DVR is key locked.  
Recording:  
By default, the DVR will record any data received from cameras connected to it. The following  
provides instructions for making basic adjustments to the record settings. See the Users Manual  
section 3.5 Record Schedule / Quality Settings for more details.  
1. Enter the system menu by pressing MENU on the front panel/remote or by right clicking the  
main screen and choosing . Enter a username and password if necessary. User account  
must have sufficient system authority to adjust recording settings. See the Users Manual  
section 3.2.1 User Management for details on how to edit user accounts.  
2. Choose Record Setup . The default setting is PresetBest Quality.  
3. The recording options are:  
720x480@30PPS4 (6KB/P5), 720x240@60PPS4 (4KB/P5), 360x240@120PPS4 (2KB/P5)  
720x480@30PPS4 (22KB/P5), 720x240@60PPS4 (12KB/P5), 360x240@120PPS4 (6KB/P5)  
720x480@30PPS4 (14KB/P5), 720x240@60PPS4 (8KB/P5), 360x240@120PPS4 (4KB/P5)  
2KB/P5  
3KB/P5  
4KB/P5  
Extended  
Best Quality  
Standard  
128Kbps DSL  
256Kbps DSL  
512Kbps DSL  
ezRecord  
Activates ezRecord function and ezRecord menu (Record Setup option 5)  
Activates event-only recording. DVR will record only when an event is detected.  
Disables presets. Use this setting when Per Camera Config is required.  
Event Only  
OFF  
4Pictures Per Second  
5Picture  
4. To configure recording on a per camera basis, set Preset Config to OFF. Each channel can  
be configured to record at a certain quality for certain time periods or events. For detailed  
information please see the Users Manual section 3.5.4 Per Camera Configuration.  
Searching  
1. To search playback data, press the SEARCH button on the front panel or remote, or right click  
the main screen and choose  
.
2. There are three different search modes from which to choose:  
Search by Time  
Select From: to start playing from earliest recorded video.  
8
SECO-LARM U.S.A., Inc  
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Select End: to start playing from latest recorded video.  
Continued from page 8  
At Select, choose a date and time to from which to start playing video.  
Select or click the play icon to begin playback from the selected start point.  
Calendar Search  
Select Calendar Search from the SEARCH menu.  
Choose the year and month you wish to view.  
Choose a day on the calendar and press ENTER. Days shown in light gray on the  
calendar are those for which recorded data is available.  
Press right/left keys to choose a playback start point or choose Select to manually choose  
a start time. Times where data was recorded will show in yellow in the Search By Time  
section.  
Select or click the play icon to begin playback from the selected start point.  
Search by Event  
Select the channel or channels you wish to view.  
Events from the selected channel or channels will be listed.  
Select an event record.  
Note: The event list will only display 1,024 events. Events are added on a first-in first-out  
basis. For more information about setting up event recording, please refer to the User’s  
Manual section 3.6 Event Settings.  
Remote Viewing:  
The DVR provides full access to live and recorded data, DVR settings, and export features via  
the Windows Internet Explorer Internet browser.  
1. Ensure the DVR is connected to the local area network. Note the DVR’s IP address via System  
MenuSystem SetupLAN SetupIP. If using other network options see the User’s Manual  
section 5 Remote Monitoring Software or consult your network’s administrator.  
2. On a computer with access to the local area network, open Internet Explorer and enter the  
DVR IP address in the following format (where w.x.y.z is the IP address as noted in step 1):  
http://w.x.y.z/  
Note: When entering the IP address, enter exactly as shown in LAN Setup.  
Note: The default port used is 80. If changed, be sure to add it after the IP. For example:  
3. The browser will load the remote viewing software and prompt for a username and password.  
4. The first time the software loads, two ActiveX controls will be installed.  
5. Usernames and passwords are the same as those for accessing the DVR on screen display.  
Note: Your browser may require additional setup. If the remote viewing software does not load,  
please consult the Users Manual section 5 Remote Monitoring Software.  
6. The remote playback interface is as shown on the following page.  
SECO-LARM U.S.A., Inc  
9
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Continued from page 9  
Ch1  
Ch5  
Ch9  
Ch13  
Ch2  
Ch3  
Ch4  
Remote™  
2
2010/05/01 PM 12:00:00  
1
8
3
1
2
4
6
8
4
5
6
7
3
5
Ch6  
Ch7  
Ch8  
7
9
10  
12  
14  
16  
11  
13  
15  
High Speed  
Ch10  
Ch14  
Ch11  
Ch15  
Ch12  
Ch16  
9
10  
13  
15  
17  
19  
11  
12  
100%  
4:3  
14  
16  
18  
Remote Viewing Software Interface Descriptions  
1
2
3
4
Channel images with channel numbers  
Current date and time  
Sound ON/OFF  
11  
Screen size  
12  
13  
14  
Download DVR Player software  
Live View (show live video streams)  
Playback (opens playback menu)  
Quick Record (press once to assign file and  
start recording, press again to stop recording)  
5
6
7
4-channel view  
9-channel view  
16-channel view  
15  
16  
17  
18  
19  
Settings (opens settings menu)  
Search by event  
Snapshot (captures current view)  
Show 4:3 aspect ratio  
Device status  
8
9
10  
Channel selection (shows fullscreen view)  
Bandwidth selection  
Dual streaming  
Mobile Viewing:  
If the DVR is connected to the Internet, mobile devices with Java-capable Internet browsers  
(including the iPhone) can be used to view live data.  
1. In the mobile device web browser, enter the IP address of the DVR. Consult your network  
administrator for further information.  
2. A window will display requesting a username and password. These are the same as those  
used to access the DVR via other means.  
3. Once connected, a live stream from Channel 1 will be displayed along with the date and time.  
4. Use the drop-down menu to select streams from other channels.  
5. Be sure to log out when finished viewing to allow the next user to log in.  
6. For more detailed instructions, see User’s Manual section 6 iPhone and Smart  
Phone Monitoring.  
10  
SECO-LARM U.S.A., Inc  
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Playback:  
1. Playback is stopped and started by pressing the PLAY/STOP button on the front panel or  
remote, or by right clicking the main screen and choosing  
.
2. Playback will start from wherever the previously displayed recording was stopped.  
3. Use the MODE, PLAY/STOP, FREEZE and ZOOM buttons to adjust playback. Using the  
mouse, right click and select  
,
,
or respectively.  
4. When playback is paused, pressing the right/left buttons will advance/reverse by one frame.  
Using the mouse, scrolling up or down will advance/reverse respectively.  
5. Change the playback speed using the right/left arrow buttons or scroll up and down with a  
mouse. Playback can be sped up or slowed down by up to 32x its original speed. Current  
playback speed is displayed in the lower left-hand corner of the screen.  
6. To return to live view, press PLAY/STOP.  
Note: The system menu cannot be accessed while in Play or Freeze mode. First return to live  
view to access the system menu.  
Exporting Video:  
The DR-1 series offers a fast, simple and convenient export function.  
1. Connect a USB flash drive or other storage device via the USB port on the front of the DVR.  
2. Play back the desired recorded data. Mark the export start point by pressing the COPY button  
C
on the front panel or remote, or right click the main screen and choosing  
.
3. Continue playback until you reach the desired end point. If needed, increase playback speed  
as explained in Playback on page 11 of this guide. Mark the export end point by pressing the  
C
COPY button on the front panel or remote, or right click the main screen and choosing  
.
4. The DVR will prompt the user to confirm the data for export. Export may take up to an hour.  
5. Data exported is in .drv format and can be viewed using the built-in remote viewing software.  
Please refer to the Users Manual.  
Note: A copy of the video player software will be added to the export device.  
Shutting Down the DVR:  
1. Enter the system menu by pressing MENU on the front panel/remote or right clicking the main  
screen and choosing  
.
2. Enter the Shutdown menu and choose Power Off, or use a mouse to click Execute.  
SECO-LARM U.S.A., Inc  
11  
 
ENFORCER DR-1 Series DVR Quick Setup Guide  
Pin Connection for Alarm I/O & RS-485, and Audio In:  
Alarm I/O & RS-485:  
DR-104Q:  
Pin Connection  
Pin Connection  
Pin Connection  
Pin Connection  
1
2
3
4
Alarm Out Open  
Alarm Out COM  
RS-485 D+  
5
6
7
8
Alarm In 1  
Alarm In 2  
Alarm In 3  
Alarm In 4  
9
Alarm Out Close  
GND  
GND  
13  
14  
15  
GND  
GND  
GND  
10  
11  
12  
RS-485 D-  
GND  
DR-108Q and DR-116Q:  
Pin Connection  
Pin Connection  
Pin Connection  
1
2
3
4
5
6
7
8
9
Alarm Out Open  
Alarm Out COM  
RS-485 D+  
RS-485 D-  
Reserved  
Alarm In 1  
Alarm In 2  
Alarm In 3  
10  
11  
12  
13  
14  
15  
16  
17  
18  
Alarm In 5  
Alarm In 6  
Alarm In 7  
Alarm In 8  
Alarm Out Close  
Reserved  
19  
20  
21  
22  
23  
24  
25  
Alarm In 10 (DR-116Q)  
Alarm In 11 (DR-116Q)  
Alarm In 12 (DR-116Q)  
Alarm In 13 (DR-116Q)  
Alarm In 14 (DR-116Q)  
Alarm In 15 (DR-116Q)  
Alarm In 16 (DR-116Q)  
Reserved  
Reserved  
Alarm In 4  
Alarm In 9 (DR-116Q)  
Audio In (DR-108Q and DR-116Q only):  
Pin Connection  
Pin  
10  
11  
12  
13  
14  
15  
16  
17  
18  
Connection  
Pin Connection  
1
2
3
4
5
6
7
8
9
Audio 1  
Audio 3  
Audio 5  
Audio 7  
GND  
GND  
GND  
Reserved  
Audio 2  
Audio 4  
Audio 6  
Audio 8  
Audio 10 (DR-116Q)  
19  
20  
21  
22  
23  
24  
25  
Audio 12 (DR-116Q)  
Audio 14 (DR-116Q)  
Audio 16 (DR-116Q)  
GND  
Audio 9 (DR-116Q)  
Audio 11 (DR-116Q  
Audio 13 (DR-116Q)  
Audio 15 (DR-116Q)  
GND  
GND  
GND  
Reserved  
IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national, state, and  
local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for  
the use of this product in violation of any current laws or statutes.  
WARRANTY: This SECO-LARM DVR is warranted against defects in material and workmanship while used in normal service for  
a period of three (3) years from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the  
repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.  
For full warranty information, please refer to the warranty card included with this product.  
NOTICE  
The information and specifications printed in this guide are current at the time of publication. However, the SECO-LARM policy is  
one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without  
notice. SECO-LARM is also not responsible for misprints or typographical errors.  
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,  
without the written permission of SECO-LARM.  
SECO-LARM U.S.A., Inc.  
16842 Millikan Avenue, Irvine, CA 92606  
Tel: 800-662-0800/ 949-261-2999 Fax: 949-261-7326  
PIUDS1  
mi-DR1_1005.docx  
12  
SECO-LARM U.S.A., Inc  
 

PYLE Audio Speaker PLBASS8 User Guide
Radio Shack Car Stereo System PLXR5 User Guide
Remington Styling Iron S 1004 User Guide
Rheem Water Heater 260 Litre User Guide
Saint Gobain Vidros Heat Pump PFD1 User Guide
Samson Computer Monitor AURO3 User Guide
Samsung Flat Panel Television LE22A455C1D User Guide
Samsung Printer ML 3470 User Guide
Sanyo DVR DSR 2108 User Guide
Sears Exercise Bike 831216411 User Guide