Rowenta Iron DZ5020 User Guide

GB  
D
F
I
SP  
P
RF  
GR  
UA  
mod. DZ5020  
 
fig. 1  
fig. 2  
fig. 5  
fig. 8  
fig. 11  
fig. 3  
fig. 4  
fig. 6  
NO  
OK  
fig. 9  
fig. 7  
NO  
OK  
fig. 10  
fig. 12  
 
fig. 13  
fig. 16  
fig. 19  
fig. 14  
fig. 15  
fig. 17  
fig. 18  
NO  
fig. 20  
 
З праски витiкає  
вода.  
Занадто часте натискання  
кнопки парового удару.  
Робiть бiльшi iнтервали мiж  
натисканнями кнопки.  
Використовується  
дистильована/демiнералiзов  
ана або пом’якшена вода.  
Використовуйте тiльки необроблену  
воду з-пiд крана або наполовину  
розводьте воду з-пiд крана  
дистильованою/ демiнералiзованою  
водою. Виконайте процедуру Self Clean  
(самоочищення), а потiм почистiть  
праску.  
Пiдошва брудна або Використання крохмалю.  
забарвлена в  
коричневий колiр i  
Розпилюйте крохмаль тiльки на  
зворотний бiк тканини, що прасується, а  
пiсля використання крохмалю очищайте  
праску.  
може бруднити  
бiлизну.  
Виставте бiльш високу температуру.  
Температура пiдошви  
занадто низька.  
Якщо вам не вдається визначити причину виникнення проблеми,  
зв’яжiться з уповноваженим сервiс-центром фiрми "Ровента".  
Адреси наведенi в доданому перелiку сервiс-центрiв.  
Номери телефонiв для консультацiй наведенi на першiй сторiнцi цiєї  
iнструкцiї.  
Іншi поради  
i
примiтки ви зможете знайти на нашiй веб-сторiнцi:  
Можуть бути внесенi змiни!  
75  
 
DESCRIPTION  
1
2
Spray nozzle  
Filling inlet  
(with slide-button opening)  
Variable steam control  
7
8
9
Handle  
Thermostat control light*  
Temperature control dial  
3
10 LED display*  
a
b
c
Dry ironing  
Steam max. position  
Self Clean  
a
b
c
Yellow LED  
Green LED  
Red LED  
*
GB  
d
Auto-off LED  
d
Autosteam  
*
11 Water tank  
12 Maximum water level  
indicator  
4
Spray button  
5
6
Shot of steam button  
Cord  
13 Soleplate  
SAFETY INSTRUCTIONS  
This appliance complies with the technical rules and standards for  
safety currently in force (Electromagnetic Compatibility, Low  
Voltage, Environment).  
The appliance may only be connected to alternating current as  
specified on the rating plate. Only safe extension leads should be  
used.  
An electrical appliance is not a toy. Use and store the appliance out  
of reach of children. Do not let the supply cord hang down.  
Do not leave the appliance unattended while it is connected to the  
mains supply.  
Electrical appliances generate high temperatures. Always use the  
handle and warn other users of the potential dangers (e.g. escaping  
steam or hot water, especially when ironing vertically).  
Never direct steam at persons or animals, never treat clothing  
which is being worn.  
Always unplug the appliance before filling or emptying the water  
tank; before leaving the room (even for a short time); before  
cleaning the appliance and after use.  
Never unplug the appliance by tugging on the cord.Do not immerse  
the appliance in water.  
An electrical appliance should not be used if:  
– the appliance is not functioning correctly;  
– the appliance, the supply cord or the cord protector is damaged;  
– the appliance has been dropped;  
* depending on model  
3
 
– the appliance is obviously leaking. In these cases the appliance  
should be returned to an approved Rowenta Customer Service  
Centre for repair. (See enclosed Service Centre addresses.) Repairs  
to electrical appliances may only be carried out by specialists.  
Improperly carried out repairs can cause serious danger to users.  
To avoid danger to users, a defective or damaged supply cord may  
only be replaced by an authorised Rowenta Customers Service  
Centre .  
This product has been designed for domestic use only.  
Any commercial use, inappropriate use or failure to comply  
with the instructions, the manufacturer accepts no responsibility  
and the guarantee will not apply.  
Environment protection first !  
Your appliance contains valuable materials which can  
be recovered or recycled. Leave it at a local civic waste  
collection point.  
Keep these instructions  
BEFORE USE  
1 • Unpacking  
Take the iron out of the box and remove all the stickers.  
IMPORTANT Before doing anything else, remove the soleplate  
protector (fig.1)!  
2 • What water may be used ?  
Your iron has been designed to operate using untreated tap water up  
to 17° dH (German water hardness). If in doubt, check with your local  
water authority. However, if your water is very hard, you can mix  
50% untreated tap water with 50% distilled or demineralised water.  
IMPORTANT Heat concentrates the elements contained in  
water during evaporation.The types of water listed below  
contain organic waste or mineral elements that can cause  
spitting, brown staining or premature wear of the appliance:-  
water from clothes dryers, scented or softened water, water  
from refrigerators, batteries or air conditioners, pure distilled  
4
 
or demineralised water or rain water should not be used in  
your iron. Also do not use boiled, filtered or bottled water.  
3 • Using for the first time  
Plug in the iron (fig.2) and set the temperature control dial (fig.3)  
to ••• to heat the appliance.  
A little smoke and a slight smell may be emitted, but this is only  
temporary.  
Unplug the iron (fig.4) and fill the water tank (§ 4 Filling the  
water tank).  
To remove any impurities in the iron's steam chamber, unplug the  
iron and hold it over a sink horizontally. Push the steam control into  
the Self Clean position : steam will now begin to build up.  
After a few seconds water will emerge from the soleplate,  
rinsing any impurities out of the steam chamber (fig.5).  
Move the steam control to steam  
position after approx.  
1 minute. Plug in the iron and allow the iron to heat up again.  
Wait until the remaining water has evaporated. Unplug from the  
mains and allow the iron to fully cool down.  
USE  
4 • Filling the water tank  
IMPORTANT Before filling the water tank, unplug the iron and  
set the steam control to dry position  
.
Tilt the iron. Open the filling inlet (fig.6). Pour in water up to the  
max mark (fig.7). Close the filler inlet (fig.8) and return the iron to  
the horizontal.  
5 • Setting the temperature  
Set the iron temperature to suit the type of material using the  
temperature control dial (fig.3).  
Temperature control*:The temperature control light indicates that  
the soleplate is heating up. When the temperature control light goes  
off (fig.9), the set temperature is reached and you can begin ironing.  
* depending on model  
5
 
Temperature  
control  
Ironing label  
Fabric  
Synthetic fibres, e.g.  
viscose, polyester…  
Silk, wool  
••  
Cotton, linen  
•••  
Electronic temperature control*:The traffic lights tell you whether  
the soleplate is at the selected temperature (fig.10).  
The soleplate is still too cold for the selected  
material.  
YELLOW  
The soleplate is at the right temperature for the selected  
material.  
GREEN  
RED  
The soleplate is still too hot for the selected material.  
The automatic electronic cut-out* is active.  
AUTO- OFF  
IMPORTANT The iron takes longer to cool down than to heat  
up. We recommend that you start with fabrics to be ironed at  
a low temperature. For mixed fabrics set the temperature for  
the most delicate fabric.  
TIP Always spray starch onto the reverse side of the fabric to  
be ironed.  
6 • Dry ironing  
Set the variable steam control to  
(fig.11) and set the  
temperature to suit the type of material (care points •, ••, •••).  
7 • Steam ironing  
You can steam iron from temperature setting •• upwards.  
Steam function*The steam quantity can be set to between no  
steam (minimum steam quantity) and  
(maximum steam  
quantity) (fig.12). We recommend setting to maximum steam  
* depending on model  
6
 
quantity  
only when the iron is at temperature setting •••.  
(fig.13) and  
Auto Steam function* Set the steam button to  
the steam quantity will adjust automatically to the soleplate  
temperature.  
8 • Shot of steam  
(from temperature setting •• upwards)  
IMPORTANT Leave an interval of 4 seconds between each shot  
and wait until the flow of steam is finished before standing the  
iron on its heel.  
Press the shot of steam button  
to generate a powerful jet of  
steam and remove stubborn creases (fig.14).  
9 • Vertical shot of steam  
(from temperature setting •• upwards)  
TIP Hold the iron 10 to 20 centimetres away from the garment  
to avoid burning delicate fabrics.  
Hold the iron to the vertical and press the shot of steam button  
(
fig.15) to remove creases from suits, jackets, skirts, hanging  
curtains etc.  
IMPORTANT Never direct the steam at persons or animals!  
10 • Spray  
Press the spray button  
to dampen stubborn creases (fig.16).  
11 • Anti-Drip system*  
It prevents water escaping from the soleplate when the temperature  
is too low.  
12 • Automatic electronic 3-position cut-out*  
If, although switched on, the appliance is not moved, it will  
automatically switch off and the auto off light will blink after the  
following intervals:  
- After 30 sec., if the iron is left standing on the soleplate or lying on  
its side .  
- After 8 mins., if the iron is left standing on its heel.  
To switch the iron back on, move the iron gently.  
* depending on model  
7
 
AFTER USE  
13 • Emptying  
Unplug the iron (fig.4), pour away remaining water (fig.17) and set  
steam control to  
.
Open and close the steam control several times (fig.18) to prevent  
the valve hole into the steam chamber from scaling or blocking up.  
14 • Storing  
Allow the appliance to cool down before storing the iron standing  
on its heel (fig.19).  
IMPORTANT Do not wind the cord around the hot soleplate.  
Never store your iron placed down on the soleplate (fig.20).  
MAINTENANCE AND CLEANING  
IMPORTANT Unplug and allow the iron to fully cool down  
before maintenance and cleaning.  
15 • Anti-scale system  
Your iron contains an anti-scale cartridge to reduce scale deposits.  
This considerably prolongs the operational life of your iron.  
The anti-scale cartridge is an integral part of the water tank  
and does not need to be replaced.  
16 • Self Clean function  
(prolongs the life of the iron)  
The Self Clean function flushes dirt and scale particles out of the  
steam chamber.  
IMPORTANT Do not use descaling agents, as these damage  
the lining of the steam chamber and so may impair the steam  
function.  
Fill the water tank with tap untreated water up to the max mark and  
heat the iron to the ••• temperature. Unplug the iron and hold it  
over a sink horizontally. Hold the steam control into the Self Clean  
position (fig.5) : steam will now begin to build up. After a few  
seconds water will emerge from the soleplate, rinsing dirt and scale  
particles out of the steam chamber.  
8
 
Move the steam control to position after approx. 1 minute.  
Plug in the iron and allow the iron to heat up again. Wait until the  
remaining water has evaporated. Unplug from the mains and allow  
the iron to fully cool down.  
When cool, the soleplate can be wiped with a damp cloth.  
TIP Use the Self Clean function approx. every 2 weeks.  
If the water is very hard, clean the iron weekly.  
17 • Cleaning the iron  
When the appliance has cooled down, wipe it down with a damp  
cloth or sponge, as required.  
Remove the dirt from the soleplate with a damp cloth or sponge.  
IMPORTANT Do not use sharp or abrasive cleaning agents or  
objects to clean soleplate and other parts of the iron.  
If the appliance has been standing unused for long periods,  
use the Self Clean function (see § 16).  
PROBLEMS?  
Problems Cause  
Solution  
The iron is  
No mains supply.  
Check that the mains plug is properly  
inserted or try plugging the iron into a  
different socket.  
plugged in, but  
the soleplate of  
the iron  
remains cold.  
Temperature control Set the temperature control to a  
set too low.  
higher temperature.  
The automatic  
electronic cut-out* is  
active.  
Move your iron.  
Thermostat  
This is normal.  
When the thermostat control light* or  
the yellow led* goes on and off the  
iron is heating up. As soon as the  
thermostat control light* goes off or  
the green led* lights up the set  
control light* or  
the yellow led*  
goes on and off.  
temperature has been reached.  
* depending on model  
 
9
None or too  
little steam is  
being emitted.  
Steam control set on  
dry position  
Turn the steam control to the  
required setting area.  
.
Not enough water in  
the water tank.  
Fill the water tank.  
Anti-Drip* is active  
11).  
Wait for the soleplate to reach  
the correct temperature.  
Residues in the steam  
chamber or on the  
soleplate.  
Use the Self Clean function then  
clean your iron.  
Brown streaks  
come through  
the holes inthe  
soleplate and  
stain the linen.  
Use of chemical  
descaling agents.  
Do not add any descaling agents  
to the water in the water tank.  
Use the Self Clean function and  
clean your iron.  
Fabric fibres have  
accumulated in the  
holes of the soleplate  
and are burning.  
Clean the soleplate with a  
non-metallic sponge.  
Vacuum the holes of the  
soleplate from time to time.  
Your linen is not rinsed Ensure linen is rinsed thoroughly  
sufficiently or you have to remove any soap deposits or  
ironed a new garment  
before washing it.  
chemicals on new garments  
which may be sucked by the  
iron.  
Use of starch.  
Always spray starch onto the  
reverse side of the fabric to be  
ironed and clean your iron  
soleplate.  
Pure distilled /  
demine-ralised or  
softened water is  
being used.  
Only use untreated tap water or  
mix half tap water with half  
distilled/demineralised water.  
Use the Self Clean function and  
clean your iron.  
Overuse of shot of  
steam button.  
Allow more time between each  
shot.  
Iron is leaking.  
Soleplate temperature  
too low .  
Set the temperature control to a  
higher temperature.  
If you are unable to trace the cause of the fault, contact an official Rowenta  
Customer Service Centre.The addresses are shown in the enclosed service  
centre address list. Helplines listed at the front of this leaflet.  
Subject to modifications !  
* depending on model  
10  
 
1103899452  
 

Radio Shack Answering Machine TAD 779 User Guide
RCA Dishwasher PSD3420ZBB User Guide
Roadmaster Speaker System RTS2000T User Guide
Rosewill Garage Door Opener RHRC 12001 User Guide
Samson Automobile Parts EB 8331 1 EN User Guide
Samsung DVD Player DVD C631P User Guide
Samsung DVR 1650D User Guide
Samsung Flat Panel Television LE15S5 User Guide
Seagate Flat Panel Television ST12450W WD User Guide
Sennheiser Headphones HDA 200 User Guide