External Enclosure for
3.5" SATA to USB + eSATA
RX81US-HT35B-BLK
User Manual
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Available Interfaces
USB 2.0 + e-SERIAL ATA
Protection of DC adapter
a. Primary (Input) Protection
The input power line will be fused with a fuse 2.0A, 250 VAC.
b. Secondary (Output) protection
b.1. Over Current (OC) Protection
When an internal fault occurs, or an external fault is applied to the
power, such that an overload or short circuit is applied to the
output, the power will be shutdown. Power latch is not allowed.
b.2 Over Voltage (OV) Protection
If an over-voltage fault occurs on the adapter output, the power
will shutdown.
b.3 Short Circuit Protection
The power will protect itself, and shut down, if a short circuit is
placed between DC return and the output. This condition will
cause no damage to the power. Power latch is not allowed.
2
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Package Contents
z 3.5 inch external enclosure
z Driver Disk
z Installation Guide
z AC adapter
z USB cable
z eSATA cable
z Footstand
z Screw Kit
FEATURE
z Standard USB 2.0 high speed transfer rate.
z Support Serial ATA. (USB + e-SATA)
z Aluminum HDD frame for easy installation.
z Crystal acrylic casing with blue & green LED illumination.
z Suitable for all 3.5" SATA HDD.
z All aluminum, to enhance heat dissipation.
z Crystal footstand for vertical style.
z Plug and play / hot swappable.
z OS support Windows 98SE/ME/2000/XP/Vista/Mac OS 8.6
above.
3
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Technical Specifications
Bus
USB v 2.0 / eSATA
Interfaces:
USB 2.0 = 480 Mbps
Data Speeds
eSATA = 3.0 Gbps (NCQ Support)
Connectors
SATA
USB B receptacle / eSATA connectors
Compliant with SATA I / II with NCQ
support
Standard
LED
Power On / Access
AC Adapter 12V 2A
100V ~240V full range
208 (D)*128 (W)*36(H) mm
0.84Kg
Power Supply
AC Input
Dimensions
Weight:
Certification
CE
4
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Installation Guide
1. Pull the bottom (as fig.1) to release the HDD tray.
2. Fix the HDD by screws after HDD located with the connecter.
5
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
3. Aims at trail and pull in the tray into external box.
4. After connect USB / SATA and Power cable, HDD will appear
the relativity.
Attention:
z Make sure your PCI Host Card is installed correctly
z If required, update your OS (win 2000 to SP4, Win xp to SP1a)
z Only one interface at the time can be used (combo model)
6
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Driver Installation:
Windows 98SE
z After plug the external box into, the system will remind you
there is a new hardware of USB Storage Adapter add into.
z Design the driver of the safe path (in the driver), the system will
active the installation automatically.
z After for a while, click "My Computer", USB HDD will appear the
relativity on the PC.
Windows ME/2000/XP/Vista
The system already provided support for the software.
MAC OS 8.6/9.x/above
OS 8.6 edition:
z The Driver is the “GeneUSBIDE_05E3_0702.sit” under the
catalogue of the MAC, copy the document to the tope a table
and clicks the document out, and then it will occur
the document of the driver automatically.
z Please copy the driver document to the system folder of the PC.
-- (System Folder) -(extensions).
z Connect with the USB HDD
OS 9.X edition:
The system already provides support for the software.
7
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
The divided partition of the external HDD
Win 98SE/ME SYSTEM
FDISK is command that doing the divided partition to HDD, The
step of how to divided partition from the HDD by using FDISK as
follows:
z Plug the cable of USB into PC, and be sure that the PC has
identified HDD.
z Execute "FDISK" under the model of COMMAND.
z After enter the FDISK program [If the FDISK program does not
work, please restart your PC again (don't plug out the USB
HDD) then it will be work]. Firstly select "The fifth item" -- select
the USB HDD you want to divided partition for, then just see
the illustration as follows: Then just follow the instruction to
divided partition for the HDD of USB.
Windows 2000/XP/Vista
Plug the HDD into your system, it will appear the hot plug a play.
Just click “Control Panel”/ “manage tool” / “computer
management” / “Disk management”. All the disk connects to the
PC will appear on the chart, as well as the state of the HDD. Find
out the HDD and click the right bottom of the mouse under the
state of chart, just follow the step. Take a look of the icon on the
bottom.
Mac OS
Mac OS9.2 and earlier version does not support creating partition
on an external HDD. For your new HDD, you need to purchase
additional 3rd party software to creating your HDD partition.
For Mac OS X, use the Disk Utility to format and divided partitions
on your external disk.
• Select “Disk Utilities” in the utilities folder.
• Choose your external drive and format it.
8
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
Notice: If you want your ENCLOSURE on a Windows as well as on
your Mac OS, we recommend you to use a PC to format the drive.
Choose FAT32 format and do not change anything on the partition
or format on your Mac, otherwise the Windows OS can not be able
to recognize the enclosure.
To remove the device:
For Windows 98SE Users
Before you remove your device please wait for “Access LED” on
reader stops blinking to prevent data loss.
For Windows ME/2000/XP/Vista Users
Please double-click the icon
box will appear.
on the system tray. A dialog
Double-click the Generic USB Storage Device to remove the
device for preventing from data loss.
Mac OS
You can remove the cable of USB after putting the icon of USB
HDD on the desktop into the trash can.
9
External Enclosure For 3.5” SATA to USB + eSATA
User Manual
FAQ
How to solve it if you can’t use the Mobile Disk under some
OS:
It doesn’t support any USB device under the WIN95 and NT4 OS,
so that can’t use the Mobile Disk.
After formatting can PC use in the MAC?
If use the Mobile Disk in the PC, can just format directly. If the PC
& MAC cannot be in common use, you can use the MACOPEN
software (download from the Internet) in the PC, format to the
MAC model. If you used the MO storage before, you must familiar
and have more experience about it because MO storage has the
same problem when doing the format.
Why I can not see the drive?
If you can not see the drive, make sure the jumper settings of your
hard drive is “master”.
Thank you for purchasing a quality Rosewill Product.
and future support for your product.
10
|