INTRODUCTION
Thank you for your purchase of the SLC19 Stereo Level Control.
The SLC19 is a simple device designed to control stereo line-level
audio signals such as those connected to powered speakers, com-
puter speakers, microphones, or anywhere an inline level control is
desired.
WARRANTY INFO
ranty information and registration.
l o r t n o C l e v e L o e r e t S 9 C 1 S L
LEFT: 1/4” TRS and XLR Input jack.
LEVEL: Adjusts the level of the signals at the Left and Right Input
jacks.
RIGHT: 1/4” TRS and XLR Input jack.
MUTE: When pressed in, the signals are all muted.
The SLC19 is a simple device designed to control
balanced stereo line-level audio signals such as
those connected to powered speakers, computer
speakers, microphones, or anywhere an inline
REAR PANEL
LEFT: 1/4” TRS and XLR Output jack.
RIGHT: 1/4” TRS and XLR Output jack.
WARNING: DO NOT CONNECT THE SLC19 IN REVERSE.
VERIFY THAT THE SLC19 INPUTS ARE CONNECTED TO THE
LINE-LEVEL OUTPUTS OF THE DEVICE TO BE CONTROLLED.
ALSO - DO NOT CONNECT THE SLC19 TO ANY SPEAKER-
LEVEL OR POWERED SIGNAL. DOING SO WILL DAMAGE THE
UNIT.
• Dual 1/4” TRS Inputs and Outputs
• Dual balanced XLR Inputs and Outputs
SCHEMATIC
Rolls Corporation
Salt Lake City, UT
1/06
|