ROLLS RM65 6 x 4 MIXER
The new ROLLS RM65 6 x 4 mixer is a breakthrough in size/performance for
an audio mixer, it is a full function 6 channel mixer in a single space 19" rack
chassis. It is intended for sound reinforcement, studio, choir, and other
applications where high channel to size ratio is desirable. The RM65 is in-
tended for professional applications and has socketed IC's, double sided
circuit board and painted steel chassis. It has 6 XLR microphone and 6 1/4"
line inputs. The mic inputs have individual 36V phantom power switches and
input gain trims located on the rear panel.
ꢀEATURES
• 0ull function 6 channel console mixer in 1 rack space
• 6 XLR mike inputs and 6 1/4" line input jack
• 36 Volt Phantom Power
• Individual phantom power switches for each XLR
• Input gain trim control for each mic input
• Clip indicators for each channel
• Monitor, effects send and Pan pots on each channel
• Treble and Bass tone controls for each channel
• R & L Master volumes and 0X Return master channel
• Standard 19" x 1.75 EIA rack chassis
SPECIꢀICATIONS
Input Impedance:
600 W balanced
50K W unbalanced (1/4")
50 W TRS Balanced
-15 dBV XLR 600 W
+18 dBV 1/4"
Output Impedance:
Max Input Level:
Phase Shift:
< 10 deg. 20 Hz - 20 kHz
XLR and 1/4"
36 Volts DC
1/4" main balanced +17 dB max
1/4" monitor +17 dB max
1/4" 0X send
Input Connectors:
Phantom Power:
Outputs:
Max Gain:
(Mains)
(Monitor)
60 dB mic
26 dB line
55 dB
20 dB treb, bass cut/boost, 400 Hz center
106 dB
Tone controls:
Max S/N Ratio:
THD
< .003%
IMD (SMPTE)
CMRR
Power
Weight:
Size:
< .003%
52 dB
120 VAC 50-60 Hz, 15 W
7 lbs (3KG)
19" x 1.75" x 6.5" (48cm x 4.5cm x 17cm)
ROLLS Coporation 8/97
5143 South Main Street, Salt Lake City, UT, 84107
(801) 263-9053 FAX (801) 263-9068
|