RocketFish Video Gaming Accessories RF GDS013 User Guide

2
3
Insert the DC car adapter into a  
Using the earbuds  
Nintendo® DSi™ Starter Kit  
standard 12V DC car cigarette lighter  
or accessory socket. Make sure that  
the plug is fully inserted into the socket.  
The charge indicator LED on your  
console turns orange while recharging,  
then turns off when fully charged.  
When your console is fully charged,  
unplug the car charger and disconnect  
it from your game console. Make sure  
that you pull on the charger housing,  
not the power cord itself.  
With the earbud headphones, you can  
more easily hear game sounds, without  
disturbing others.  
Welcome  
Congratulations on your purchase of another high-quality Rocketfish Gaming  
product. This starter kit can make your gaming more trouble-free and fun, and  
it can help your Nintendo® DSi™ game console last longer, too! All Rocketfish  
Gaming products are designed for years of trouble-free performance.  
Insert the earbud’s plug into the  
headphone connector on your  
console.  
Warning: Make sure that the volume is turned  
down before connecting the earbuds.  
Otherwise, you may damage your hearing.  
Package contents  
Using your stylus and lanyard  
Your new stylus, with an attached  
lanyard, is perfect for replacing the  
original stylus, if it gets lost or damaged.  
The lanyard makes it easy to remove  
and hold onto the stylus.  
Applying the screen and camera shields  
Shields provide a tough, durable, transparent surface, while keeping the LCD  
screens and camera lens clean and unscratched.  
1
Clean the screens before installing  
the screen shields.  
DC car adapter (1)  
Screen shields (2)  
Camera lens shield (2)  
Stylus (2)  
Clear play-thru case (1)  
2
Remove the adhesive backing from  
the screen shield and carefully  
attach it to the screen.  
Use any straight , rounded edge to  
smooth bubbles out of the shield  
from one side to the other.  
Carefully attach the camera lens  
shield to the camera lenses on the  
interior and exterior of the DSi.  
To attach a lanyard to a stylus:  
1
Feed one end of the lanyard  
through the lanyard hole in the  
stylus.  
3
4
2
Feed the other end of the lanyard  
through the lanyard loop that was  
fed through the hole, then pull to tighten.  
Stylus lanyards (2)  
Earbud headphones (1 set)  
USB cable (1)  
Quick Setup Guide (1)  
Using the USB car charger  
1
Connect the DC car adapter to your Nintendo  
DSi using the included USB cable. Make sure  
that both plugs are facing the correct direction  
before you insert them into the connectors, or  
you may damage the connector’s pins.  
Installing the clear play-thru case  
The play-thru case’s cover helps  
to protect your console from dirt,  
scratches, and damage from drops.  
It also allows complete access to all  
controls, the touch screen, and the  
stylus.  
90-day limited warranty  
© 2009 Best Buy Enterprise Services, Inc.  
All rights reserved. ROCKETFISH is a trademark of Best Buy Enterprise Services, Inc.  
Registered in some countries. All other products and brand names are trademarks of their  
respective owners.  
Caution: Make sure that the plug is facing the correct  
direction before you connect it to your console, or you  
may damage the connector’s pins.  
Carefully slide your game console  
into the case.  
ENGLISH 09-0118  
 
RF-GDS013  
QUICK SETUP GUIDE  

PYLE Audio TV Mount PSW101CM User Guide
Renesas Computer Hardware H8SX 1658R User Guide
Roland Electronic Keyboard HP 7 3 User Guide
Rosewill Computer Hardware RC212 User Guide
Rowenta Hair Clippers HC080 User Guide
Saeco Coffee Makers Espresso Maker Aroma User Guide
Samsung DVD Player DVD C631P User Guide
Samsung Flat Panel Television HPN5039 User Guide
Samsung Telephone SP C802R User Guide
Schumacher Battery Charger 1010 2 PE User Guide