RF-P2USB3 USB 3.0 PCI Express Card
General description
Congratulations on your purchase of the RF-P2USB3 dual-port USB 3.0 PCI
Express Card adapter. The USB Express Card is ideal for external storage
devices, digital cameras, web cams, networking, video devices, card readers,
external DVD writers, MP3 players, and all other USB devices.
Package contents
Express card components
•
•
USB 3.0 PCI Express Card
Driver CD
• Short backplate
Quick Setup Guide
•
Edge view
Side view
Minimum system requirements
•
PCI Express-enabled system with an available PCI Express slot.
(Recommend PCI Express 2.0)
USB 3.0 ports
•
Windows® XP, Windows® Vista, or Windows® 7
Installing the hardware
1 Turn off your computer and unplug the power cord and all cables.
2 Remove your computer’s case cover. See your computer’s user guide for
information about removing the cover.
3 Locate an available PCI Express slot, remove the screw that secures the
backplate (the small piece of metal that covers the opening for the PCI
card on the back panel of your computer), and then remove the
backplate. If you are using slim desktop computers, change to short
backplate.
USB 3.0 ports
4 Carefully insert the adapter into the PCIe x1 slot, seating it firmly into the
slot. Do not touch the metal connector on the adapter.
5 Connect an available floppy 4-pin power plug from your PC’s power
supply to the adapter card’s 4-pin power connector.
4-pin power
connector
PCIe
slot × 1
PCIe
slot × 16
4-pin floppy Power
PCI slot × 16
power plug supply
Quick Setup Guide
|