Renesas Starter Kit for 7542
Quick Start
LCD module
E8a header
Application Board Interface
Reset switch
LCD module
connector
Application Board Interface
E8a emulator
User LEDs
Analog adjust
User switches
Voltage Conversion Board
(for QzROM microcontroller)
D007294_11_S01_V03
25. On the Project Generator Information window: Click <OK>.
The project that is created has two configurations. The Release configuration can be used for the final release code
version. The Debug configuration allows modifications to the configuration for debugging.
26. Select the Debug build configuration in the left hand drop down list on the toolbar.
27. Click on the “Build” icon to compile, assemble and link the project.
4. Programming and Debug
28. Ensure the “Session740_E8a_SYSTEM” session in the right hand drop down list on the toolbar is selected.
29. Click the <Connect> button on the debug toolbar.
30. The “Emulator Setting” dialog will be shown. Select the
correct MCU group and device type (e.g. 7542 Group and
M37542F8_RSK for RSKM37542).
31. Select “Erase Flash and Connect”.
32. If the E8a is to provide power to the CPU board, select
“Power Target from Emulator” and choose the “5.0V” option.
Otherwise connect a 5V centre positive supply.
33. Click <OK>.
34. Accept any dialog warning that an older version of E8a firmware is necessary to work with the application. Allow
download of firmware to complete, this may take several seconds.
The connection to the Renesas Starter Kit will be completed and will activate the debugger buttons on the
High-performance Embedded Workshop toolbar.
35. Right click on the download module listed in the left
hand pane and select “Download”.
The code will be downloaded to the microcontroller.
This may take several seconds.
36. Click the <Reset Go> button.
The code will run and you will see the LEDs flash on the board.
37. Click the <Stop> button.
The code will stop and the source code will be opened at the current program counter.
5. Next Step
After you have completed this quick start procedure, please review the tutorial code and sample code that came with
the kit. You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu.
The tutorials will help you understand the device and development process using Renesas Development Tools.
The Hardware manual supplied with this kit is current at the time of publication. Please check for any updates to the
device manual from the Renesas website at: www.renesas.com/renesas_starter_kits
6. Support
Online technical support and information is available at: www.renesas.com/renesas_starter_kits
Technical Contact Details
America:
Europe:
Japan:
Note on Autoupdate: The Autoupdater is configured to automatically add itself to the Startup folder in the Windows
Start Menu and use the registry defaults for access to the web. After restarting the machine the Icon will appear in
the System Tray next to the clock. To change the settings or access Autoupdate simply right-click on the icon and
use the menu that appears.
© Renesas Solutions Corporation. 2007.
© Renesas Technology Europe Ltd. 2007.
© Renesas Technology Corporation. 2007.
D007294_11_S01_V03
|