Remington Electric Shaver R 9190 User Guide

CS27661_R-9170_series_IB_r1 9/1/05 11:01AM Page1  
®
®
MC  
Use and  
Care Guide  
R-9190  
R-9290  
 
CS27661_R-9170_series_IB_r1 9/1/05 11:01AM Page4  
Product Features  
Which model is yours?  
Shaver Parts  
Indicator lights  
Quick  
charge  
Worldwide  
voltage  
(A) Head guard  
(B) Head & cutter assembly  
(C) On/off button  
(D) Percentage of charge 6 LEDs  
(R-9290)  
Power  
system  
Run  
time  
Fuel  
Charging  
Low  
battery  
(B)  
R-9190  
Cord/cordless  
Cord/cordless  
60 min  
60 min  
x
x
x
x
x
x
R-9290  
x
(E) Trimmer button  
(F) Cleaning brush  
(G) Storage pouch  
(H) Charger  
R-9190  
Charging indicator  
(blue)  
Low-charge  
indicator (red)  
(C)  
R-9290  
Full battery gauge  
(H)  
(D)  
(A)  
(E)  
Easy-View®Trimmer  
(G)  
(F)  
4
5
 
CS27661_R-9170_series_IB_r1 9/1/05 11:01AM Page6  
How To Use  
Always keep the protective head guard on  
the cutter head and keep the trimmer in  
the off”position when the shaver is not in  
use. The head guard must be put on with  
the rear tab to the back of the shaver.  
Make sure your face is  
clean and dry before  
starting.  
To Trim  
Getting a Close, Comfortable  
®
To use the Easy-View  
Shave  
pop-up trimmer, simply  
push the trimmer button  
up. The trimmer will pop-  
up for use. Hold the shaver as shown in the  
illustration. To conserve battery energy (on  
rechargeable shavers only), it is recommend-  
ed to use the trimmer only when needed for  
trimming. When through using, push the  
trimmer button downward to lock into the off  
position.  
Congratulations on your purchase of  
a premium Remington® shaver. The  
Titanium MicroFlex® 800 has  
Revolutionary Titanium Shaving  
Technology.  
To Shave  
Push the on/off button to  
activate the shaver for  
shaving.  
The Best Technique  
It’s simple to get a great shave from your new  
shaver. Here are a few tips for getting the  
closest shave possible:  
®
The MicroFlex needs no  
adjustments to the heads  
or cutters before you  
shave. The floating heads  
will automatically adjust to  
Trim Sideburns  
Always use a clean, dry  
shaver. Make sure that the  
cutter head assembly is in  
the locked position.  
Simply touch the comb-  
edge of the trimmer to the  
desired line for neat, clean  
sideburns.  
the contours of your face.  
It is not necessary to apply pressure while  
shavinglet the shaver glide lightly on your  
skin. This gentle touch makes shaving easier  
and helps avoid possible skin irritation.  
Trim Mustache  
Wait at least 15 minutes  
Hold shaver at desired trim  
line for a quick, easy,  
professional trim. The  
trimmer can also be used  
to trim the upper edge of  
your mustache.  
12  
6
after getting up before  
shaving, to ensure the face  
is free of puffiness that  
may be present from  
sleeping.  
9
3
Use short, circular strokes.  
Use your free hand to  
stretch your skin. This  
encourages your whiskers  
to stand out, making it  
easier for them to enter  
the cutting chamber.  
7
6
 
CS27661_R-9170_series_IB_r1 9/1/05 11:01AM Page8  
Usage Tips  
Before using read the important safety  
instruction section in front of the manual.  
Model R-9190  
Troubleshooting:  
Worldwide Voltage  
A blue indicator light shows charging. A red  
low-battery indicator illuminates to show when  
the shaver needs recharging. This also  
indicates approximately 5 minutes of shaving  
time left when indicator first comes on.  
(all MicroFlex® models)  
If your R-9190/9290 shaver battery is  
completely dis-charged or the shaver has  
not been used for an extended period of  
time, the shaver may not start when  
operated using the cord. If this condition  
occurs, charge the shaver for approxi-  
mately five minutes before shaving.  
Your cord/cordless shaver should not be  
used strictly as a cord-operated shaver,  
as continued cord only use will result in  
reduction of battery life.  
You can take your shaver with you when you  
travel to just about anywhere in the world.  
Your shaver features worldwide automatic  
dual voltage conversion providing AC current  
between 100-240 volts AC, 50-60 Hz. Just  
plug it in to the local outlet (you may need  
an adapter plug) and use as usual. Your  
shaver will convert automatically to the local  
current requirements.  
Charging  
Prior to using your shaver for the first time,  
put it on charge for 24 hours.  
Model R-9290  
To charge your shaver:  
A blue lighted fuel gauge displays the amount  
of charge remaining in 20% increments.  
When only 20% of the charge remains, the  
recharge red warning light illuminates.  
Make sure your shaver is turned off.  
Connect the cord to the shaver and then  
the charging adapter to the electric outlet.  
A charging indicator light will come on.  
Your shaver cannot be overcharged, so you  
can leave it plugged in and charging  
between shaves.  
In order to preserve the life of the batter-  
ies, they should be fully discharged every  
six months and then fully charged for 24  
hours.  
Use only the charging adapter supplied  
with the shaver.  
Special feature allows you to run the  
shaver directly off the cord. Your shaver  
will not recharge while you are shaving,  
so after shaving directly from the cord,  
turn the unit off and set aside to charge.  
Provides up to two weeks worth of shaving  
after a one hour charge or a single shave  
after five minutes of charging.  
9
8
 
CS27661_R-9170_series_IB_r1 9/1/05 11:01 AM Page 10  
Cleaning & Maintenance  
at a time to  
prevent mixing cutter  
components. (These  
should be kept as  
sets). After cleaning,  
place cutter retainer  
Cleaning your shaver  
When is it time to replace your heads  
and cutters?  
TO ASSURE OPTIMAL PERFORMANCE, IT IS  
RECOMMENDED THAT YOU CLEAN YOUR  
SHAVER AFTER EACH USE. The cutting system  
of this shaver was designed to be cleaned by  
rinsing under warm running water or by  
It is very important to replace your heads and cutters  
when necessary to insure a close, comfortable shave  
without irritation. We recommend they be replaced  
every 12 months. Here are some signs of head and  
cutter wear, indicating that replacement is needed.  
assembly in the hair  
brushing.  
pocket, and secure  
®
by turning center  
knob approximately  
1/4 turn clockwise.  
Cleaning your Remington branded shaver is  
easy.  
Open the hair pocket by pressing the release  
button and rotating away from the body of  
Irritation  
As the heads get excessively worn there may be some  
skin irritation. This would be especially noticed when  
applying after shave lotion.  
Caution: Never put the shaver completely  
under water. Do not use any aggressive  
the shaver. You  
may blow out the  
cleansing agent as this may destroy the  
stubble thoroughly,  
shaver coatings.  
To clean and lubricate your shaver’s cut-  
or rinse the shaver  
head in water.  
Pulling  
®
ters and head assembly, apply Remington  
Shaver Saver® (SP-4) Lubricant. The lubri-  
cant helps remove hair clippings while  
reducing wear. A quick spray after each  
shave keeps your shaver operating at peak  
performance.  
When the cutters wear you may feel a sense of pulling  
and a loss of closeness when you shave. This is an  
indication that it is time to replace your heads and  
cutters.  
Rinse both sides of  
the head assembly.  
At Least Once a Week:  
For more complete cleaning, remove the  
cutter retainer assembly from the hair  
pocket by turning the center knob  
approximately 1/4 turn  
counter clockwise.  
Hold cutter retainer  
assembly as shown,  
and remove head by  
The replacement part for this shaver is model #SP-21. U.S.  
residents: To order, contact us at 800-736-4648, visit us at  
www.remington-products.com or visit your local retailer.  
Caution: Do not remove or replace the head  
assembly while shaver is running or plugged  
into an electrical outlet as it may cause  
damage to the unit’s cutters.  
Canadian residents: For any shaver accessory requirements, please  
call (800) 268-6531 or write: Remington Products  
(Canada) Inc., P.O. Box 601, Postal Station T,Dept. A-100,  
3019 Dufferin St., Toronto, Ontario, Canada M6B3T7.  
Worn or damaged parts should be  
turning approximately  
1/8 turn in the direc-  
tion shown. Brush  
®
replaced with Remington branded  
replacement parts only.  
clean both the head  
and the cutter. Reassemble head to cutter  
retainer assembly by aligning and turning  
head 1/8 turn in the opposite direction.  
Repeat this process for each of the 3  
heads. Clean each head and cutter set one  
10  
11  
 
CS27661_R-9170_series_IB_r1 9/1/05 11:01 AM Page 12  
Performance Guarantee  
Warranty  
This warranty does not cover products  
100-240 VAC 50/60 Hz  
Performance Guarantee  
Warranty Service  
damaged by the following:  
Accident, misuse, abuse or alteration of it  
Spectrum Brands, Inc. Money-Back Offer  
In the U.S. and Canada, service is provided  
by authorized service dealers. For the  
address of your nearest authorized service  
dealer, contact us at 800-736-4648 (in U.S.),  
800-268-0425 (in Canada), visit our website  
your local Yellow Pages under "Shaver-  
Electric-Repair."  
REMINGTON, MICROFLEX, EASY VIEW and  
SHAVER SAVER are trademarks of ROVCAL,  
INC.  
If within 30 days after you have purchased  
®
your Remington brand product, you are not  
Servicing by unauthorized persons  
Use with unauthorized accessories  
Connecting it to incorrect current and  
voltage  
Any other conditions beyond our control  
No responsibility, obligations, or liability  
is assumed for the installation or  
maintenance of this product.  
satisfied with it and would like a refund, just  
return it, together with the sales receipt, to the  
retailer from whom it was purchased.  
Spectrum Brands, Inc. will reimburse all  
retailers who accept such appliances within  
30 days from date of purchase. If you have  
any questions regarding this money-back  
guarantee, please call 800-736-4648 in the  
U.S. or 800-268-0425 in Canada.  
© 2005 ROVCAL, INC.  
07/05 Job #CS27661  
U.S. Patent D447,284 and Patents Pending.  
Spectrum Brands, Inc.  
800-736-4648  
Rayovac Canada  
800-268-0425  
KEEP ORIGINAL SALES RECEIPT AS PROOF  
OF PURCHASE FOR WARRANTY PURPOSES.  
SPECTRUM BRANDS, INC. SHALL NOT BE  
RESPONSIBLE FOR ANY INCIDENTAL,  
Full Two-Year Warranty  
Spectrum Brands, Inc. is a global consumer  
products company with a diverse portfolio of  
SPECIAL OR CONSEQUENTIAL DAMAGES  
RESULTING FROM THE USE OF THIS PROD-  
UCT. ALL IMPLIED WARRANTIES INCLUDING  
BUT NOT LIMITED TO IMPLIED WARRANTIES  
OF FITNESS AND MERCHANTABILITY, ARE  
LIMITED IN DURATION TO TWO YEARS  
FROM DATE OF ORIGINAL PURCHASE.  
Questions or comments:  
Call 800-736-4648 in U.S. or  
800-268-0425 in Canada.  
MADE IN CHINA  
T22-17154  
®
world-class brands, including Remington -  
branded electric shavers. Spectrum Brands,  
Inc. warrants that this product is free from  
defect in material and workmanship for two  
years after its original purchase date—except  
for damage as specified below and these parts  
meant to be replaced during  
This warranty gives you specific legal  
rights, and you may also have other rights  
that vary from state to state or province to  
province. Some states do not allow the  
exclusion or limitation of incidental or  
consequential damages, or limitations on  
how long an implied warranty lasts, so the  
above limitations and exclusions may not  
apply to you.  
regular maintenance:  
SHAVERS: head assembly  
If the product should become defective within  
the warranty period, Spectrum Brands, Inc. will  
repair it or elect to replace it free of charge.  
We will return your product, shipping charges  
prepaid, if you do the following within two  
years of the purchase date:  
1. Return the complete product in person  
or by mail, postage paid, to Customer  
Service, Spectrum Brands, Inc., 601  
Rayovac Dr., Madison, WI 53711  
U.S. residents:  
To order shaver accessories contact  
us at 800-736-4648, visit us at  
visit your local retailer.  
2. Include the original purchase receipt  
with the product.  
Canadian residents:  
3. Include a description of the problem  
or defect.  
To order shaver accessories, please  
call 800-268-0425 or visit us at  
4. Do not return the product to the store that  
sold it to you.  
12  
13  
 
CS27661_R-9170_series_IB_r1 9/1/05 11:01 AM Page 14  
®
 

PYLE Audio Stereo System FWM352 User Guide
Q Logic Router ISR6152 User Guide
Radio Shack Car Video System PLRDVD7 User Guide
Reliable Carpet Cleaner i700A User Guide
Rio Audio MP3 Player Mp3 Player Model Chiba User Guide
Rotel Car Speaker RDV 995 User Guide
Saitek Video Game Controller P990 User Guide
Samson Speaker System L1212 User Guide
Samsung Blu ray Player BD C5500 User Guide
Sears Cordless Drill 1032313 User Guide