HOT WATER STORAGE TANKS
NON-CODE
80 AND 115 GALLONS
APPLICATION
Thetankcanbeinstalledwheneverthedemandutilizesstoredwaterfrom80to115gallonsormore. Whetherinstalled
individually or as several tanks in parallel, this tank can provide 80% draw without an appreciable temperature
decreaseinsingletemperatureapplication.
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Available in 80 and 115 gallon sizes
150 PSI maximum working pressure
Twomagnesiumanodes
Meets ASHRAE 90.1
LosAngelesCityapprovalapplicationno. M-880057
Insulatedandjacketed
R-16valueinsulation
Foaminsulation
Five-yearlimitedwarranty
Labelsforeachopening
Largedrainvalve
80 gallon tank illustrated
CONSTRUCTIONCODE
•
•
Steel Jacket - Complete unit is enclosed in baked
enamel steel jacket. With minimum care, the jacket
will remain attractive and colorful for years.
Tank Openings - Circulating tank connections and
hotwateroutletsare2”NPT. Otheropeningsarefor
TandPvalve,tankstat,thermometeranddrainport.
(3/4"NPTDrainvalvestandard)
•
Storage Tank - The tanks are lined with a double
coating of a high-temperature glass formula. It is
built for long life under any water conditions. Two
magnesium anode rods are factory installed.
R-FoamInsulation-Rigidpolyurethanefoaminsu-
lation for improved economy and fuel savings. The
insulation is R-16 value and complies to ASHRAE
90.1.
•
•
Labels-Openingsareindividuallylabeled
for easy identification.
SAMPLESPECIFICATION
The hot water storage tank shall be a Raypak __________ gallon factory insulated and jacketed tank.
Thetankshallhaveadoublecoatingofahightemperatureglassliningandbeequippedwithtwo(2)magnesiumanode
rods. The tank shall be constructed and designed for 150 PSI working pressure.
Thetanksshallbeinsulatedwithrigidpolyurethanefoamthatcompletelysurroundsthetankandshallbeenclosed
inabakedenamelsteeljacket. ThetankinsulationmustbeR-16valueandmustmeetorexceedASHRAEstandard
90.1. The tank shall be covered by a five (5) year limited warranty against corrosion.
CatalogNo.:4000.20-I
Effective:03-15-08
Replaces:12-28-07
|