RCA Stereo System RS2768i User Guide

THE LIGHTNING FLASH AND ARROWHEAD  
WITHIN THE TRIANGLE IS WARNING  
SIGN ALERTING YOU OF "DANGEROUS  
VOLTAGE" INSIDE THE PRODUCT.  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
FCC information  
For your safety  
R e o r i e n t o r r e l o c a t e t h e  
receiving antenna.  
A
This device complies with part 15 of  
the FCC Rules. Operation is subject  
to the following two conditions: (1)  
This device may not cause harmful  
interference, and (2) this device must  
accept any interference received,  
including interference that may  
cause undesired operation.  
The AC power plug is polarized (one  
blade is wider than the other) and  
only fits into AC power outlets one  
way. If the plug won’t go into the  
outlet completely, turn the plug  
over and try to insert it the other  
way. If it still won’t fit, contact  
a qualified electrician to change  
the outlet, or use a different one.  
Do not attempt to bypass this  
safety feature.  
IMPORTANT SAFETY INSTRUCTIONS  
Increase the separation between  
the equipment and receiver.  
Connect the equipment into an  
outlet on a circuit different from  
that to which the receiver is  
connected.  
C o n s u l t t h e d e a l e r o r a n  
experienced radio/TV technician  
for help.  
Some of the following information  
safety. If the provided plug does  
not fit into your outlet, consult  
an electrician for replacement of  
the obsolete outlet.  
Protect the power cord from  
being walked on or pinched  
particularly at plugs, convenience  
receptacles, and the point where  
they exit from the apparatus.  
has been damaged in any way,  
THE EXCLAMATION POINT WITHIN THE  
TRIANGLE IS A WARNING SIGN ALERTING  
YOU OF IMPORTANT INSTRUCTIONS  
ACCOMPANYING THE PRODUCT.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
may not apply to your particular  
product; however, as with any  
electronic product, precautions  
s h o u l d b e o b s e r v e d d u r i n g  
handling and use.  
Read these instructions.  
Keep these instructions.  
such as power-supply cord or  
plug is damaged, liquid has been  
spilled or objects have fallen into  
the apparatus, the apparatus has  
been exposed to rain or moisture,  
does not operate normally, or has  
been dropped.  
USER MANUAL  
RS2768i  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR  
BACK). NO USERSERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
WARNING: TO PREVENT FIRE OR  
ELECTRICAL SHOCK HAZARD, DO  
NOT EXPOSE THIS PRODUCT TO RAIN  
OR MOISTURE.  
CAUTION: USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE  
O F PRO CEDU RES OTHER THA N  
THOSE SPECIFIED MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
CAUTION: DANGER OF EXPLOSION  
I F B AT T E R Y I S I N C O R R E C T LY  
REPLACED. REPLACE ONLY WITH  
THE SAME OR EQUIVALENT TYPE.  
This equipment has been tested and  
found to comply with the limits for  
a Class B digital device, pursuant  
to part 15 of the FCC Rules. These  
limits are designed to provide  
reasonable protection against  
harmful interference in a residential  
installation. This equipment  
generates, uses and can radiate  
radio frequency energy and, if not  
installed and used in accordance  
with the instructions, may cause  
harmful interference to radio  
communications. However, there is  
no guarantee that interference will  
not occur in a particular installation.  
If this equipment does cause harmful  
interference to radio or television  
reception, which can be determined  
by turning the equipment off and  
on, the user is encouraged to try to  
correct the interference by one or  
more of the following measures:  
Caution:  
Heed all warnings.  
WARNING: Changes or modifications  
to this unit not expressly approved by  
the party responsible for compliance  
could void the user's authority to  
operate the equipment.  
CAUTION: TO PREVENT ELECTRIC  
SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
Follow all instructions.  
Do not use this apparatus near  
water.  
Only use attachments/accessories A D D I T I O N A L S A F E T Y  
This product utilizes a laser. Use  
of controls or adjustments or  
performance of procedures other  
than those specified may result in  
hazardous radiation exposure. Do  
not open covers and do not repair  
yourself. Refer servicing to qualified  
personnel.  
specified by the manufacturer.  
Use only with the cart, stand,  
t r i p o d , b r a c k e t , o r t a b l e  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/apparatus  
combination to avoid injury  
from tip-over.  
INFORMATION  
Apparatus shall not be exposed  
to dripping or splashing and no  
objects filled with liquids, such  
as vases, shall be placed on the  
apparatus.  
Clean only with dry cloth.  
Do not block any ventilation  
openings. Install in accordance  
w i t h t h e m a n u f a c t u r e r s  
instructions.  
Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including amplifiers)  
that produce heat.  
Do not defeat the safety  
purpose of the polarized  
or grounding-type plug. A  
polarized plug has two blades  
with one wider than the other.  
A grounding type plug has two  
blades and a third grounding  
prong. The wide blade or the  
third prong is provided for your  
Technical information  
Product: 5 Disc Audio System  
Brand: RCA  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Always leave sufficient space  
a r o u n d t h e p r o d u c t f o r  
ventilation. Do not place  
product in or on a bed, rug, in  
a bookcase or cabinet that may  
prevent air flow through vent  
openings.  
Model: RS2768i  
WARNING: MAINS PLUG IS USED Power Supply: 120V ~ 60Hz  
AS DISCONNECT DEVICE AND IT  
SHOULD REMAIN READILY OPERABLE  
DURING INTENDED USE. IN ORDER  
T O D I S C O N N E C T T H E M A I N S  
PLUG FROM MAINS COMPLETELY,  
T H E M A I N S P L U G S H O U L D B E  
DISCONNECTED FROM THE MAINS  
SOCKET OUTLET COMPLETELY.  
Power Consumption: 240 Watts  
CLASS 1 LASER PRODUCT  
This Audio System has  
earned the ENERGY  
STAR.  
Service information  
This product should be serviced  
only by those specially trained in  
appropriate servicing techniques.  
For instructions on how to obtain  
service, refer to the warranty in-  
cluded in this Guide.  
Do not place lighted candles,  
cigarettes, cigars, etc. on the  
product.  
Connect power cord only to AC  
power source as marked on the  
product.  
Portable Cart Warning  
Unplug this apparatus during  
lightning storms or when unused  
for long periods of time.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
It's important to read this instruction prior to using your new product  
for the first time.  
This product contains a low  
power laser device.  
Care should be taken so that  
objects do not fall into the product.  
-1-  
-2-  
-3-  
-4-  
IMPORTANT SAFETY INSTRUCTIONS  
Important Information  
Getting Started  
Getting Started  
General Controls  
Do not attempt to disassemble the cabinet. This product does not  
contain customer serviceable components.  
Main plug is used as disconnect device and it should remain readily operable  
during intended use. In order to disconnect the apparatus from the mains  
completely, the mains plug should be disconnected from the mains socket  
outlet completely.  
Using FM and AM antennas  
Before you use your audio system, Each speaker has a black/red wire  
Connecting speakers  
CLOCK – To show time and  
enter clock setting mode.  
Precautions  
Headset safety  
Unpacking the system  
Installation  
To ensure sufficient ventilation,  
keep the spacing shown below  
free from other surfaces:  
Main Unit  
This compact disc player uses  
a laser to read the music on  
the disc. The laser mechanism  
corresponds to the cartridge  
and stylus of a record player.  
A l t h o u g h t h i s p r o d u c t  
incorporates a laser pick-  
up lens, it is completely safe  
when operated according to  
directions.  
Have a Blast-Just Not  
You should have the following:  
you’ll want to make sure both  
the FM and AM antennas are po-  
sitioned properly. Uncoil the FM  
antenna at the back of the unit,  
making sure it is fully extended  
(you may even want to tape it to  
the wall behind the unit if pos-  
sible, the higher the better).  
and a black/purple wire. When  
connecting the speakers, match  
the red/purple wires to the red/  
purple jacks and the black wires  
to the black jacks on the main  
unit.  
in your eardrums!  
M a k e s u r e y o u  
one main unit (with 2 speak-  
ers)  
TIMER – To turn the timer on/  
off; press and hold to enter the  
timer setting mode.  
5
C
D
C
H
A
N
G
E
R
CLOCK  
DIMMER  
DEMO  
TIMER  
SLEEP  
turn down the volume on  
the unit before you put on  
headphones. Increase the  
volume to the desired level  
only after headphone are in  
place.  
Do not play your headset at  
high volume. Hearing experts  
warn against extended high-  
volume play.  
one remote control  
one AM loop antenna  
one user manual  
4”  
4”  
DISC SKIP  
IF YOUR PRODUCT OPERATES ON BATTERIES, adhere to the  
following precautions:  
AUTO  
PROG BAND  
DIMMER•DEMO – To turn the  
feature demonstration on or off;  
to adjust display brightness.  
SOURCE  
4”  
4”  
A. Do not mix old and new batteries.  
B. Do not mix alkaline, standard (carbon-zinc), or rechargeable (NiCd,  
NiMH, etc) batteries.  
C. Any battery may leak electrolyte or explode if disposed of in fire or  
an attempt is made to charge a battery not intended to be recharged.  
D. Discard leaky batteries immediately. Leaking batteries can cause skin burns  
or other personal injury. When discarding batteries, be sure to dispose of them  
in the proper manner, according to your state/provincial and local regulations.  
E. Battery shall not be exposed to excessive heat such as sunshine, fire  
or the like.  
2”  
PROGRAM  
1
2
Connections  
Back view  
1. AM loop antenna jack  
2. FM pigtail antenna  
3. Speaker jacks  
PLA  
Y
EQ  
MODE  
You’ll also need to connect the AM  
antenna loop to the back of the  
unit if you listen to AM stations.  
Rotate the AM loop antenna for  
better reception.  
SLEEP – To select the time  
interval in minutes before the  
unit turns off.  
SHUTTLE  
Discs rotate at high speed  
inside the player. Do not use  
damaged, warped, or cracked  
discs.  
BASS  
Side view  
Front view  
Push speaker  
terminal tab  
down to insert  
wire.  
Release tab to  
lock wire in the  
terminal.  
If you experience ringing in  
your ears, reduce volume or  
discontinue use.  
You should use with extreme  
c a u t i o n o r t e m p o r a r i l y  
discontinue use in potentially  
hazardous situations.  
To open or close the disc tray.  
Do not touch the pick-up  
lens which is located inside  
the disc compartment. To  
keep dust from collecting  
on the pick-up lens, do not  
leave the compartment door  
open for an extended period  
of time. If the lens becomes  
dirty, clean it with a soft  
brush, or use an air blower  
brush designed for camera  
lenses.  
AM loop antenna  
(included)  
DISC SKIP – To skip to the next  
CD in the tray in CD mode.  
Speaker  
Speaker  
ON/STANDBY – To turn power on  
or off (STANDBY mode).  
NOTE: Make sure the insulation  
is completely removed from the  
ends of the speaker wires at all  
connection points.  
(R)  
(L)  
VOLUME – To increase/decrease  
the volume.  
AUTO PROG•BAND – To toggle  
between AM and FM. Also used  
to auto-preset radio stations in  
FM mode.  
Red & Black  
Red & Black Purple &  
Black  
Purple & Black  
Even if your headset is an  
open-air designed to let you  
to hear outside sounds, do  
not turn up the volume so  
high that you are unable to  
hear what is around you.  
Excessive sound pressure from  
earphones and headphone  
can cause hearing loss.  
/
– To tune radio frequency;  
to skip CD track; to fast search  
through the CD.  
SOURCE – To select among CD  
player, TUNER, iPod, LINE IN and  
AUX sources.  
– To play or pause CD.  
– To stop CD playback.  
PROGRAM – To enter program  
mode for CD and tuner.  
-5-  
-6-  
-7-  
-8-  
-9-  
General Controls  
General Controls  
Display  
Clock and Timer  
Clock and timer  
Sound Features  
PRESET  
previous or next preset stations  
in tuner mode.  
/
To select the  
FM ST. – To switch between FM output.  
CD tray status:  
Lights when loaded  
Flashes for the current disc  
Animates when playing  
the desired volume level.  
7. Press TIMER to save settings.  
Remote control  
Setting the clock  
1. Press and hold CLOCK until  
the hour flashes on the  
display.  
Setting the timer  
Bass boost  
Press BASS to turn on/off  
boosting the bass frequency. The  
BASS icon lights on the display  
on and off modes.  
For RADIO timer, tune in to a  
desired station.  
For CD timer, insert a CD into  
the unit.  
SHUFFLE – To turn on/off  
LINE IN/ AUX – To select the random playback.  
Source indication  
Activating the timer  
Tap TIMER to turn on/off the when it is activated.  
For iPod timer, insert your timer. The timer is active when  
SHUFFLE To turn on/off  
random playback.  
external sound input from LINE  
IN/ AUX IN jacks.  
MENU – To display iPod menu;  
and return to previous menu.  
2. Press  
/
to set the hour  
and then press CLOCK to  
shift to minute digits.  
Muting audio  
PLAY MODE – To cycle between  
different play mode.  
DISC SKIP – To skip to next CD in  
CD mode.  
iPod into the connector.  
the clock icon  
is lit.  
SELECT – To confirm iPod menu  
lists.  
Press  
on the remote control  
3. P r e s s  
minute.  
/
t o s e t t h e 1. Press and hold TIMER until  
to cut or restore the sound.  
ON (timer on time) appears  
with the hour flashing.  
2. For setting time, press  
to set the hour and then  
press TIMER to shift to the  
minute digits.  
Sleep mode  
You can select the time interval in  
minutes before the unit turns off  
automatically.  
LINE IN Ø3.5mm jack for  
external audio sources.  
VOL+ / VOL– – To increase/  
decrease the volume.  
4. Press CLOCK to save settings.  
INTRO – To turn INTRO mode on  
or off to play the first 10 seconds  
Using preset equalizer curves  
/
Press EQ on the unit to select  
among FLAT, ROCK, POP, JAZZ,  
CLASSIC and CUSTOM. The dis-  
play shows your selection briefly.  
AUX IN•L/R – Jacks for external  
audio sources.  
– To play and pause the of each track.  
current CD.  
When system is  
ON, you can tap  
CLOCK to display  
the current time – it will  
display time for about 2  
seconds.  
When the system is OFF  
(standby), the display will  
turn off to save power.  
Playback  
mode  
status  
Folder navigation mode  
Radio bands  
1. Press SLEEP to select among  
OFF, 120, 90, 60, 45, 30, 15, 10  
and 5 minutes. The sleep icon  
lights on the display when  
sleep mode is activated.  
2. When sleep is activated, press  
SLEEP once to view remaining  
sleep time. Press SLEEP again  
when the remaining sleep  
time is displayed to change  
the sleep time.  
PRESET – To select previous  
3. P r e s s  
minute.  
/
t o s e t t h e  
BASS – To turn BASS on or off.  
PREV/ ,NEXT/ – To tune radio / next tuner preset station; to  
frequency; to skip CD track; to navigate the iPod menu list.  
BASS – bass boost activated  
Timer activated  
Creating a Custom Curve  
1. Press EQ on the unit to select  
the CUSTOM mode.  
EQ To select the equalizer  
presets.  
– To turn power on or off  
(STANDBY mode).  
PROG – program playback mode STEREO – FM stereo mode acti-  
4. Press TIMER to change to  
OFF (timer off time) with  
hour flashing. Repeat steps  
2 & 3 for timer off time  
setting.  
fast search through the CD.  
SLEEP – To select the time  
activated  
vated  
OPEN/CLOSE – To open and interval in minutes before the  
SLEEP – sleep mode activated  
EQ – preset equalizer activated  
J a c k f o r c o n n e c t i n g  
CD – To select the CD player.  
2. While CUSTOM is displayed,  
close CD disc tray.  
unit turns off.  
Display brightness  
headphones  
press  
/
to cycle among  
Product Demonstration mode  
Press DIMMER•DEMO to turn  
on/off demonstration mode. The  
demonstration scrolls through all  
display operations.  
TUNER – To select the tuner and  
change the radio band.  
1. Press and hold DIMMER•DEMO  
for more than 2 seconds.  
2. While “DIM” is displayed,  
p r e s s D I M M E R • D E M O  
repeatedly to select the  
desired level (DIM 1–3).  
STOP – To stop playing CD.  
the displayed BASS and TREB  
range levels.  
3 . W h i l e B A S S o r T R E B i s  
displayed, adjust the volume  
to set the associated gain  
between -10 - +10.  
5. Press TIMER to select the  
The remote control  
must be inserted with  
2 AAA” batteries  
prior to use.  
source. Press  
/
to select  
PLAY MODE – To cycle between  
different play mode.  
INFO – To select among disc  
display information.  
among TUNER, CD or iPod.  
6. P r e s s TIMER t o s e t t h e  
volume. Adjust the timer  
Sleep is automatically de-  
activated when the unit is  
turned off.  
– To mute and restore audio  
iPod – To select iPod playback.  
volume by  
/
to select  
4. Press EQ to exit.  
-10-  
-11-  
-12-  
 
-13-  
-14-  

RCA Camcorder CC6263 User Guide
RCA Flat Panel Television L46WD250 User Guide
Redring Plumbing Product 550S User Guide
Renesas Computer Hardware SH2 7137 User Guide
Rolls Stereo Receiver RDB109 User Guide
RuggedCom Switch m2200 User Guide
Ryobi Cordless Saw R10631 User Guide
Ryobi Trimmer PLT3043S User Guide
Salter Housewares Scale instruction manual User Guide
Sanyo Digital Camera VCC PN9575P User Guide