v5.0 (1.0.5.0) (EN_E_F)
English
user manual
guide de l’utilisateur
manual de usuario
Product registration
RC142
Thank you for purchasing an RCA product. We pride ourselves on the quality and
reliability of all our electronic products but if you ever need service or have a question,
PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the
unlikely event a safety notification is required under the Federal Consumer Safety Act.
Register Online at: WWW.RCAAUDIOVIDEO.COM. Click on Product Registration
and Fill Out the Brief Questionnaire.
Aux
Beep
Beep
Music
Alarm
Sleep
1
PM
Alarm
FM
2
Some of the following information may not apply to your
particular product; however, as with any electronic product,
precautions should be observed during handling and use.
USB CHARGING CLOCK RADIO
Enregisregistro del productotrement du produit
Gracias por comprar un producto RCA. Nos enorgullece la calidad y fiabilidad de todos
nuestros productos electrónicos, pero si alguna vez necesita servicios técnicos o si tiene
alguna pregunta, nuestro personal de atención al cliente está a su disposición para
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
ayudarle. Comuníquese con nosotros en www.rcaaudiovideo.com. REGISTRO DE COMPRA: El registro en línea nos permitirá
comunicarnos con usted en el caso de tener que enviarle algún aviso de seguridad en virtud de la Ley Federal de Seguridad
del Consumidor. Registre el producto en línea en: WWW.RCAAUDIOVIDEO.COM. Haga clic en Registro del producto y
responda al cuestionario.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
•
•
Enregistrement du produit
Merci d’avoir acheté un produit RCA. Nous sommes fiers de la qualité et de la fiabilité de tous nos produits électroniques,
mais en cas de nécessité de réparation ou pour toute question, le personnel de notre service clientèle est prêt à vous aider.
Contactez-nous sur www.rcaaudiovideo.com. ENREGISTREMENT D’ACHAT: Enregistrer votre produit en ligne nous permettra
de communiquer avec vous pour tout avis de sécurité au sujet du produit en vertu du Federal Consumer Safety Act (Loi fédérale
de protection du consommateur). Enregistrez votre produit en ligne sur: WWW.RCAAUDIOVIDEO.COM. Cliquez sur
Enregistrement produit et remplissez le court questionnaire.
•
•
•
Use only with the cart, stand,
]
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
EN/E/F
It is important to read this user manual prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su equipo.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
Portable Cart Warning
•
Unplug this apparatus during lightning storms or when
FCC Information
Before you begin
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
Power failure indicator
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
unused for long periods of time.
and do not puncture.
If you have not installed the two AA batteries in the product,
or the batteries run out while AC/DC adaptor is disconnected,
all the settings (clock and alarm) will be lost. After AC/
DC adaptor is reconnected, the Digital Display will flash to
indicate that power was interrupted and you should readjust
the time settings.
•
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
•
Non-rechargeable batteries, such as alkaline batteries,
may leak if left in your product for a long period of
time. Remove the batteries from the product if you
are not going to use it for a month or more.
If your product uses more than one battery, do not
mix types and make sure they are inserted correctly.
Mixing types or inserting incorrectly may cause them
to leak.
Changes or modifications not expressly approved by VOXX
Accessories Corporation could void the user’s authority to
operate the equipment.
•
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
Alkaline (1.5V) battery is recommended.
Carbon-zinc battery may be used but
memory holding time will be substantially
reduced. Memory holding time for a fresh
alkaline battery is approximately 8 hours (if alarm
is not operated) which should take care of short,
nuisance-type AC power failures. To preserve battery
life, the unit should remain plugged into an AC
outlet. As the battery gets older, its voltage drops and
memory may be lost. Be sure to replace the battery
periodically. Battery should be removed if the unit will
be stored for more than one month. A leaky battery
can badly damage the clock radio.
ADDITIONAL SAFETY INFORMATION
•
•
Discard any leaky or deformed battery immediately.
They may cause skin burns or other personal injury.
Please help to protect the environment by recycling or
disposing of batteries according to federal, state, and
local regulations.
•
•
•
•
The AC/DC adapter supplied with this product is
intended to be correctly oriented in a vertical or floor
mount position.
Do not use unauthorized chargers or power adapters.
Use only chargers or power adapters that came with
your product or that is listed in the user’s guide.
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Always leave sufficient space around the product for
ventilation. Do not place product in or on a bed, rug,
in a bookcase or cabinet that may prevent air flow
through vent openings.
CAN ICES-3 (B)/NMB-3 (B)
WARNING: The battery (battery or batteries or battery
pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
Before you begin
Plugging in for power
•
Connect the supplied power adaptor to the unit’s Power
jack, and connect the other end to a convenient wall
outlet.
Ecology
Help protect the environment - we recommend that you
dispose of used batteries by putting them into specially
designed receptacles.
•
Once connected with power, the clock flashes. Refer to
the Clock section for instructions on properly setting the
Clock.
•
•
•
•
•
Do not place lighted candles, cigarettes, cigars, etc. on
the product.
Care should be taken so that objects do not fall into the
product.
Do not attempt to disassemble the cabinet. This product
does not contain customer serviceable components.
The marking information is located at the bottom of
apparatus.
To be completely disconnect the power input, the AC/
DC adaptor of apparatus shall be disconnected from the
mains.
AC/DC adaptor is a disconnect device. The AC/DC
adaptor should not be obstructed OR should be easily
accessed during intended use.
The ventilation should not be impeded by covering
the ventilation openings with items such as newspaper,
table-cloths, curtains etc.
Electrical power information
AC/DC Adaptor:
Input: 100 - 240 V ~ AC 50/60 Hz
Output: 5.0 V---DC 1.2A
General controls
Battery back-up operation
•
•
•
•
This clock radio is equipped with a timekeeping system
that can be powered with two AA batteries (not
included). The power failure protection circuit will not
operate unless the batteries are installed.
When normal household power is interrupted or AC/
DC adaptor is unplugged, the battery will power the
clock radio to keep track of time and alarm settings
programmed into memory.
When the battery backup functions, the digital display
will not light, however, the alarm will still sound during
power interruption if the remaining battery power is
adequate.
Back view
USB – To charge your cell phone or other USB powered
electronic devices
FCC Information
DC IN – Plug in for power
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
•
•
Normal operation will resume after AC power is
restored so you will not have to reset the time or the
alarm.
•
•
•
No naked flame sources such as lighted candled should
be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
To install the battery:
1. Remove battery compartment door (located at the
bottom of the radio) by applying thumb pressure to the
tab on battery door and then lift the door out and off
the cabinet.
The use of apparatus in moderate climates.
Important battery precautions
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
Any battery may present a risk of fire, explosion, or
chemical burn if abused. Do not try to charge a battery
that is not intended to be recharged, do not incinerate,
2. Connect two AA batteries (not included) to the
Download from Www.Somanuals.com. AllcMonanencutoarlpsluSg.earch And Download.
3. Replace the compartment door.
Clock
Alarm function
General controls
Setting clock manually
SmartSnoozeTM
Right view
Setting alarm time and Selecting alarm source
1. Press and hold Set Alarm 1/ Set Alarm 2 to select
ALARM 1 or ALARM 2 setting mode.
1. Press and hold Set Time to enter the clock setting
mode.
•
This operation allows extra sleep time when the alarm
sounds. The alarm can be turned off temporarily by
pressing SNOOZE or any one of the SmartSnoozeTM
buttons until the snooze period is over.
AUX IN – Auxiliary input jack
2. Press HOUR+ and MINUTE+ to set the alarm time.
2. Press HOUR+ and MINUTE+ to adjust the time.
•
•
•
Press and hold to decrease or increase the time value
quickly.
The digits flash on the display in alarm time setting
mode.
The clock is in 12 hour format. The AM or PM indicator
will light to show the current time.
•
•
•
Press and hold to adjust the time value quickly.
The digits on the display flash in clock setting mode.
The clock is in 12 hour format. The AM or PM
indicator will illuminate to indicate the current time
setting.
•
•
SmartSnoozeTM buttons include: ON/FM/AUX,
TUNE-/HOUR+ and TUNE+/MINUTE+
Snooze function may be used repeatedly for up to 2
hours. After this, the alarm will turn off until the next
alarm conditions are met.
3. Press Set Time again to save the time setting.
Set Time
/
Store Preset
Press and hold
Set Alarm
VOL
1
Set Alarm
VOL
2
3. Press Set Alarm 1/ Set Alarm 2 again to save the time
setting.
4. Press Set Alarm 1/ Set Alarm 2 repeatedly to select
SLEEP RECALL
ALARM MODE
BEEP MUSIC OFF
/
/
Radio
Using the Radio
ON
TUNE
HOUR
TUNE
MINUTE
OFF
your choice of alarm source (Beep
/ Music
/ Off).
SNOOZE
BRIGHTNESS
FM/AUX
Sleep function
In sleep mode, the audio playback will turn off
automatically after a specified time (up to 2 hours).
The corresponding alarm setting icon will light when
alarm is set to activate.
Press the ON button to turn on the radio. Press the OFF
button to turn off the radio. To display the current station
that the radio is tuned to, press TUNE +/- quickly.
Top view
If wake to Music is selected, the alarm will
playback the last tuned radio station when it
goes off.
1. Press SLEEP to activate the sleep countdown timer.
2. Press SLEEP repeatedly to cycle through the available
durations for Sleep Mode (90min, 80min, 70min ...
10min or OFF). The maximum time is 90 minutes.
3. To view remaining time in sleep mode, press and hold
SLEEP.
SLEEP – Activate sleep function.
Press TUNE +/- to adjust the radio frequency with reference
to the tuning dial scale. Press and hold TUNE +/- for two
seconds to automatically search for the next available station.
The tuner will pause on each found station for one second
until the TUNE +/- is released and scanning is completed.
RECALL/Set Time/Store Preset – Press to recall a stored
radio station. Press and hold to set time. When the radio is
on, press and hold to store the current radio station.
Wake to alarm
The unit is equipped with GRAD-U-WAKE. The alarm volume
will increase gradually to its maximum in about 30 to 45
seconds.
Switching Audio Source
4. To cancel the sleep function, press OFF.
VOL -/ Set Alarm 1 – Press to toggle alarm 1 wake mode
(beep, radio, or off). Press and hold to set alarm 1. When
FM or AUX is on, press to decrease volume.
Press FM/AUX to select between FM and auxiliary source.
Ways to turn off alarm
•
To silence the alarm function momentarily, press
SNOOZE. The alarm or radio will activate again
when the snooze period (9 minutes) is over. (see
SmartSnoozeTM section for more info)
Station presets
To store a station preset:
VOL +/ Set Alarm 2 – Press to toggle alarm 2 wake mode
(beep, radio, or off). Press and hold to set alarm 2. When
FM or AUX is on, press to increase volume.
1. Tune to a radio station.
2. Press and hold Store Preset. Preset location P01
flashes on the display. Press VOL +/- to select desired
preset number, then press Store Preset again to save
the station to that preset. This unit can store up to 10
stations. Your presets are stored one by one from P01
to P10.
•
To turn off the alarm, press OFF. The alarm will activate
again the next day.
ON/FM/AUX – Turn audio playback on. Select FM or AUX
mode.
•
To disable the alarm function completely, press Set
Alarm 1/ Set Alarm 2 repeatedly until no alarm mode
icon shows on the display.
TUNE - / HOUR + – Adjust radio frequency and clock time.
To recall a preset station:
SNOOZE/BRIGHTNESS – Turn off the wake function
momentarily (9 minutes); turn off the current sleep timer.
Select display brightness (Hi or Lo).
1. In radio mode, press RECALL.
The current preset station number shows on the display.
2. Press RECALL repeatedly to select a desired preset
station.
TUNE + / MINUTE + – Adjust radio frequency and clock
time.
Built-in AFC
The Built In Automatic Frequency Control (AFC) helps to
reduce drift on FM reception and keeps the radio locked in
on the FM station to which it is tuned.
OFF – Turn FM or AUX audio off. Turn off the alarm.
This unit is equipped with an FM antenna at the back. Uncoil
the antenna to its full length for best reception. Tape the
end of the antenna onto the wall if possible to improve
reception.
Warranty information
Auxiliary source
1. Connect your auxiliary source (e.g. mp3 player) to the
AUX input jack on the right side of the unit with an
audio cable (not included).
2. Turn on your auxiliary source (mp3 player, smartphone,
etc).
3. Press FM/AUX to listen to auxiliary source. The AUX
indicator on the front will turn on. Press FM/AUX
again to switch back to listen to the radio, or press
OFF to turn off audio playback.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal
rights and you may also have other rights which vary from
state to state.
12 Month Limited Warranty
Applies to RCA Clock Radios
VOXX Accessories Corporation (the Company) warrants to
the original retail purchaser of this product that should
this product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced with reconditioned
product (at the Company’s option) without charge for parts
and repair labor.
Recommendations before returning your product for a
warranty claim:
•
Properly pack your unit. Include any remotes, memory
cards, cables, etc. which were originally provided with
the product. However DO NOT return any removable
batteries, even if batteries were included with the
original purchase. We recommend using the original
carton and packing materials. Ship to the address shown
below.
Note that product will be returned with factory default
settings. Consumer will be responsible to restore any
personal preference settings.
To obtain repair or replacement within the terms of this
Warranty, the product is to be delivered with proof of
warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to the Company at the
address shown below.
Brightness control
Press BRIGHTNESS to switch between Hi (high) or Lo (low)
to adjust the brightness of the display.
•
This Warranty does not extend to the elimination of
externally generated static or noise, to correction of antenna
problems, loss/interruptions of broafast or internet service,
to costs incurred for installation, removal or reinstallation of
product, to corruptions caused by computer viruses, spyware
or other malware, to loss of media, files, data or content,
or to damage to tapes, discs, removable memory devices or
cards, speakers, accessories, computers, computer peripherals,
other media players, home networks or vehicle electrical
systems.
Voxx Return Center,
c/o Genco ATC,
700 Commerce Parkway West Drive,
Suite C,
Greenwood, IN 46143
USB charging
Use the USB charging port to charge your smartphone or to
power USB powered devices such as a USB type lamp or fan.
1-800-645-4994
For Canada Customers, please ship to:
Voxx Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 14,
Mississuaga, Ontario
L5T 3A5
This Warranty does not apply to any product or part thereof
which, in the opinion of the Company, has suffered or
been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal or
defacement of the factory serial number/bar code label(s).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY
PURCHASER FOR THE PRODUCT.
your cell
phone
USB cable (not
included)
This Warranty is in lieu of all other express warranties or
liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.
ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS
FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY. No person or representative is authorized to
assume for the Company any liability other than expressed
herein in connection with the sale of this product.
To connect your cell phone for charging:
Use a USB cable (not included) to connect your cell phone
to the USB connector of the unit. Your cell phone should
start charging.
Charging function may not be supported for
all phones or electronic devices.
|