MC SERIES
OWNERS MANUAL
I N T R O D U C T I O N
ongratulations on your purchase of the RBH MC Series Theater
loudspeaker system! Your speakers are the result of many years of
research and development dedicated to producing high quality products for
home audio and audio/video systems.
This manual contains features, setup recommendations and specifications for
RBH MC Series loudspeaker systems. We recommend that you thoroughly
read through the material contained in this manual before connecting your
loudspeakers. This will insure that you have a good understanding of how to
setup your speakers for optimum performance.
B R E A K I N P E R I O D
lan on giving your speakers 10-15 hours of playing time to adequately
break in. As the speakers break in, the driver suspension will loosen
up. The result will be an increase in low frequency response, improved definition,
clarity and detail.
1
F E A T U R E S
t the heart of our MC Series loudspeaker system is a proprietary aluminum
cone bass/midrange driver (speaker). The unique aluminum cone material
combines stiffness, low mass, and self damping properties in a manner that allows
virtually uncolored presentation of program material. A powerful magnet, extended
voice coil and bumped back plate give the bass/midrange driver high excursion
capability,whichensuresaccuratedynamicreproduction. The drivers are shielded
by using a steel cup and an additional magnet to cancel any stray magnetic field
that many cause interference with video equipment such as tube televisions.
For high frequencies, a proprietary aluminum dome tweeter was developed.
This tweeter uses Ferro Fluid® liquid cooling allowing the tweeter to handle
greater power while retaining detail and accuracy.
Steep acoustic slope crossovers are used to integrate drivers. A polyswitch,
or current limiting device, is used in the crossover to prevent damage to
the tweeter if overdriven.
Resonance Damping Alloy Baffle technology will dampen
cabinet vibrations and minimize tweeter diffraction, all while giving a visually
pleasing look to the speaker.
Cabinets are constructed of MDF. Front baffles are extra thick to prevent
any excess acoustic radiation and have a narrow profile to minimize cabinet
diffraction. Large oversized binding posts ensure a good electrical contact.
Sophisticated computer modeling and measurement techniques are used
extensively in the RBH loudspeaker design process.
2
SETUP SUGGESTIONS
hen attaching speaker wire to the terminals, we suggest removing the
black and red plastic protective inserts. To do this, loosen the binder from
the post by twisting counter-clockwise until the binder is removed completely
from the post. Remove the plastic inserts by pulling straight out, then replace
the binder to the post and twist clockwise. A hole is provided in the post to allow
for speaker wire to slide into, then the binder is tightened until the wire is secure.
Remember to strip the insulation from the wire prior to inserting into the post.
In order to extract the best possible sound from your speaker system, it is
important to determine where the speakers will sound best in your listening
room. Room reflections from the floor, ceiling and side walls influence the
balance, imaging and overall sonic quality at the listening position. We
suggest that you experiment with speaker placement to determine which
location offers the best overall sound. The diagram on page 5 should be
used as a general guide when setting up a home theater system and follows
the descriptions in the following paragraphs. Some speakers shown in the
diagram will not always be applicable to your individual system.
The model MC-6CT comes with stabilizing feet. To install, place each foot
so that the center hole of the foot is over each pilot hole on the bottom of
the cabinet. Use the supplied screws to attach, noticing that the pilot hole is
drilled on an angle. This is done so that the foot will be pulled in tight against
the speaker cabinet. Install either the supplied spike or rubber mount as
necessary into the threaded insert.
3
SETUP SUGGESTIONS CONTINUED
s a starting point, we recommend placing your left and right MAIN
speakers at least 15 inches from the back wall and 7 feet apart from
each other. The distance from the listening position to each speaker
should be close to the distance that separates the two main speakers.
Angling the speakers inward towards the listening position may give a
more spacious and realistic sound stage.
The CENTER channel speaker should be placed in the center between both
left and right main speakers. Often this positioning dictates placing the speaker
either directly above or below a television monitor. Since all MC Series prod-
ucts are video shielded, the center speaker may be placed close to a television
without cause for concern. If using an MC-414C, the speaker may be in a
horizontal (lying down) or vertical position.
SURROUND* speakersmaybeplacedeitherabove, behindortothesidesofthe
listening position. The listening position should be at the center of both surround
speakers. For best performance you may want to experiment with angling the
surround speakers either towards or away from the listening position.
*There are several different surround formats available. Dolby Pro-Logic, Pro-Logic II, Dolby Digital and
DTS generally have a 5 speaker plus subwoofer requirement. Dolby Digital EX and DTS ES add a center
rear speaker. Please consult your audio/video professional to determine which system is best for you and
how many speakers you will require.
4
Screen
left
front
center
right
front
subwoofer
approximate listening position
left
rear
right
rear
center rear for Dolby
Digital EX and DTS ES
5
TROUBLESHOOTING
Problem
Possible Cause
Remedy
Speaker wire not connected
Make sure wire is connected
at both the speaker and the
amplifier observing polarity
No sound from speakers
Speaker selector on amplifier is
not on
Activate proper selector on
amplifier
Balance control not completely
centered
Place balance control in the
center
No sound from one speaker
Very little bass and/or imaging
Speaker wire not connected
Check all connections at the
amplifier and speakers
Speakers are wired out of phase
Check entire system for proper
polarity and make adjustments
as necessary
C A R E & C L E A N I N G
omaintainspeakerappearance, werecommendanoccasionalapplicationof
furniture grade polish to the wood surface of the cabinet. To clean dust
from the grille cloth, use a vacuum with a brush attachment.
6
S P E C I F I C A T I O N S
MC-4C
85HZ-20KHZ ± 3DB
84DB 1W/1M 50-100
WATTS
1) 1” ALUMINUM DOME TWEETER
1) 4” ALUMINUM CONE MIDWOOFER
3000 HZ
3500 HZ
3000 HZ
3000 HZ
8 OHMS
6 OHMS
8 OHMS
6 OHMS
6 OHMS
8ꢀ"H X 5.ꢁ"W X 7ꢁ"D 7ꢀ LBS.
5ꢁ"H X 14ꢀ"W X 7ꢁ"D 13 LBS.
12ꢀ"H X 7ꢂ"W X 8ꢂ"D 17 LBS.
7ꢂ"H X19ꢀ"W X 8ꢂ"D 24 LBS.
MC-414C 85HZ-20KHZ ± 3DB
88DB 1W/1M 50-120
WATTS
1) 1” ALUMINUM DOME TWEETER
2) 4” ALUMINUM CONE MIDWOOFERS
MC-6C
50HZ-20KHZ ± 3DB
87DB 1W/1M 50-120
WATTS
1) 1” ALUMINUM DOME TWEETER
1) 6 ꢀ” ALUMINUM CONE MIDWOOFER
MC-616C 50HZ-20KHZ ± 3DB
89DB 1W/1M 50-180
WATTS
1) 1” ALUMINUM DOME TWEETER
2) 6 ꢀ” ALUMINUM CONE MIDWOOFERS
MC-6CT
40HZ-20KHZ ± 3DB
87DB 1W/1M 50-200
WATTS
1) 1” ALUMINUM DOME TWEETER
1) 6ꢀ” ALUMINUM CONE MIDWOOFER
2) 6ꢀ" ALUMINUM CONE WOOFERS
100 HZ,
3000 HZ
40"H X 7ꢂ"W X 11ꢀ"D
55 LBS.
7
W A R R A N T Y
our RBH Sound MC Series loudspeaker is covered by a limited
warranty against defects in materials and workmanship for a period
of 5 years from the original date of purchase. This warranty is provided by
the authorized RBH Sound dealer where the loudspeaker was purchased.
Warranty repair will be performed only when your purchase receipt is
presented as proof of ownership and date of purchase. Defective parts
will be repaired or replaced without charge by your dealer’s store or the location
designated by your dealer that is authorized to service RBH products. Charges
for unauthorized service and transportation cost are not reimbursable under
this warranty. This warranty becomes void if the product has been damaged
by alteration, misuse or neglect. The warrantor assumes no liability for
property damage or any other incidental or consequential damage
whatsoever which may result from the failure of this product. Any and
all warranties of merchantability and fitness implied by law are limited
to the duration of this express warranty. Some states do not allow limi-
tations on how long an implied warranty lasts, so the above limitations may
not apply to you. Some states do not allow the exclusion or limitation of in-
cidental or consequential damages, so the above limitation or exclusion may
not apply to you.
8
It is the policy of RBH Sound to continuously incorporate improvements into
products. All specifications are subject to change without notice.
RBH Sound, Inc.
976 N. Marshall Way • Bldg. 2, #4 • Layton, Utah • USA • 84041
Copyright © 2003, RBH Sound, Inc. All Rights Reserved
R E D E F I N I N G T H E W A Y Y O U E X P E R I E N C E S O U N D
|