Q See Home Security System QT17DVR4C User Guide

MODEL QT17DVR4C  
Digital Peripheral Solutions Inc  
8015 Ecrystal Drive  
Q- SEE Tech Support  
IN USA  
Anaheim, CA 92807  
1- 714- 998- 3440  
MON ITOR :9am- 5pm PST  
TEL:1- 899- 998- 3440  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
Ma in s p e cific a t io n s for t h e sys t e m  
Ca m e ra S p ecifica t io n  
17'' 4:3 TFT/ LCD  
Tube  
Video Input  
Four Channels Independent Input 1.0Vp- p, 75Ω BN C  
1.0Vp- p, 75 BNC,  
Two Channels PAL/ NTSC output  
Multiple Video Signal  
Ω
Ca me ra Fe a tures  
Video Output  
One Channel VGA display interface output  
Any Single picture, built- in quad display  
1/ 3" Color C CD  
Video  
Video Display  
Video Standard  
PAL system 25 frames/ second CCIR 625 lines 50 fields  
NTSC system 30 frames/ second CC IR625 lines 50 fields  
R esolution 420 TV Lines  
Weatherproof  
R eal time recording resources, one or four channels play  
backward can be realized at the same timeone or four  
channels monitoring, network real time monitoring  
System R esources  
12 IR LEDS for Night vision  
Audio Input  
Two channels independent input 600Ω R CA  
Audio Output  
Two channels independent output 600Ω R CA  
Basic Output Gain  
Distortion Plus Noise  
R ecording Solutions  
Audio Compression  
O perating Language  
O perating Interface  
Password control  
Audio  
1.0- 2.2V  
- 30dB  
Volume and Image are Synchronized  
MPEG- 1 LAYER 2  
English  
S ys te m  
OSD menu  
Password for operators and administrators  
Image Compression  
/ Fixed bit streams  
MPEG- 4 Changeable bit streams  
H D1 format  
Single picture:  
pixels)  
Image format  
704×576  
6.25- 250Kbyte/ s  
Video code rate  
22.5M- 900Mbyte/ hour  
Video volume taken in H.D.  
Digita l  
P roce s s ing  
a nd  
real time monitoring  
704 576 pixels  
×
Play backward 352×288 Pixels  
704×576 pixelsVGA output  
R esolution  
S tora ge  
ISO14496  
Video current standard  
Audio current standard  
ISO11172  
24Kbyte/ s  
Audio code rate  
86.4Mbyte/ hour  
Audio volume taken in H.D  
One IDE hard disk, support H.D. with big volume of  
200G or more  
Internal Storage  
Image quality  
8 levels for adjusting1- 8 levels  
Date read and write way  
Full duplex  
- e1-  
- e22-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
HDD S ta tus  
HDD  
Status  
Capacity  
160G  
Free_Space  
128,125MB  
039,000MB  
000,000MB  
000,000MB  
1
2
3
4
Video R ecord  
Sleep  
CAUTION  
040G  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
N one  
000G  
N one  
000G  
Return  
CAUTION:TO REDUCE THE RISK OF ELECTRIC  
SHOCK,DO NOT REMOVE THE BACK.  
NO USER SERVICEABLE PARTS  
will enter into inquiry machine information interface, this interface will display current software  
version and MAC address information.  
INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL  
Search Menu  
All R ecord  
Log  
Graphic Sym bol Explanation  
R ecord Status  
HDD Status  
Machine Info  
Exit  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the  
user to the presence of uninsulated 'dangerous coltage' within the product's enclosure that may  
be of sufficient magnitude to constitute a risk of electric shock to persons.  
Version: 6214C- A- 01.000  
The exclamation point withinan equilateral triangle is intended to alert the user to the presence  
of important operating and maintenance (servicing) instructions in the literature accompanying  
the appliance  
MAC Address: 000.111.111.111.110  
R eturn  
Software Version: display machine type, software type, panel information and version information;  
MAC address: pressing [EN TER ] key or inputting digit according to need can setup.  
Warning - To Prevent Fire Or Shock Hazard, Do Not Expose This Monitor  
To Rain Or Moisture.  
Note: only s upe r us er ca n hold cha nging MAC a ddre s s a uthority;  
This Product Must Be Earthed.  
4.5 Exit  
Product Specification Is Subject To Change Without Notice.  
Moving cursor to thisselection item, and pressing [EN TER] key to confirm will exit to inquiry menu,  
and exit to monitoring image.  
- e21-  
- e2-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
IMPORTANT S AFEGUARDS  
4.3 Vid e o Re co rd S t a t us .  
Caution  
Search Menu  
All R ecord  
Log  
This equipment isto be opened by ONLY a qualified serviceperson. There are no user  
serviceable parts inside. Opening this equipment may expose to dangerous voltage and  
other risks. Incorrect re- assembly of this equipment may result in electric shock.  
R ecord Status  
HDD Status  
Machine Info  
Exit  
All the safety and operating instructions should be read before the appliance is operated.  
All operating and use instructions should be followed.  
1. Read lnstructions:  
2. Follow lnstructions:  
3. Cleaning:  
Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners  
or aerosol cleaners. Use a damp cloth for cleaning.  
Channel Status  
Mode Status  
F_Pic Idle  
Q
1
Frame Alarm Motion Detect  
25 close close  
Do not use this monitor near water, for example, near a bathtub, wash bowl, kitchen  
sink, laundry tub, in a wet basement, swimming pool, or any other wet surface.  
4. Water and Moisture:  
5. Accessories:  
R eturn  
Do not place this monitor on an uneven surface. The monitor may fall, causing  
serious injury to a child or adult, and serious damage to the appliance. Use only  
with a cart, stand, tripod, bracket, or table recommended by supplier, or sold  
with the monitor.  
Slots and openings in the cabinet are provided for ventilation to ensure reliable  
operation of the monitor and to protect it from overheating, and these openings  
should never be blocked by placing the monitor on a bed, sofa, rug, or other  
similar surfaces. This monitor should never be placed near or over a radiator or  
heat register. This monitor should not be placed in a built- in installation such as  
a bookcase or rack unless proper ventilation is provided or supplier instructions  
have been adhered to.  
6. Ventilation:  
1) Mode: Displays current image video recording mode, : Single mode, dual mode, quad image.  
2) Status: video record/ sleep two status  
3) Image quality: display video record data image quality  
4) Frame rate: display video record frame rate information  
5) Alarm: setting alarm/ cancel alarm two status, start alarm video record, will be setting alarm,  
instead, will be cancel alarm  
6) Motion detection: turn on/ turn off.  
Never push objects of any kind into this monitor through openings as they may  
touch dangerous voltage points or short- out parts that would result in a fire or  
electric shock. Never spill liquid of any kind on the monitor.  
7. Object and Liquid  
Entry:  
4.4 Hard Disk S t a tu s  
Moving cursor to [Hard Disk Status] item, and pressing [ENTER ] key will enter into inquiry  
hard disk status interface, this interface will display current hard disk status, including hard  
disk's space and free space.  
Do not attempt to repair this monitor yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer to qualified service personnel.  
8. Repair(Servicing):  
Search Menu  
All R ecord  
Log  
Please consult the manufacturer for the replacement parts.  
9. Replacem ent Parts:  
10. Safety Check:  
Upon completion of any service or repair to this monitor, ask the service  
technician to perform safety checks to determine that the monitor isin proper  
operating condition.  
R ecord Status  
HDD Status  
Machine Info  
Exit  
The safety and operating instructions should be retained for future reference.  
11. Retain Instructions:  
- e3-  
- e20-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
4.2 Lo g  
Ch a p t e r 1 S u rve y o f Pro d u ct s  
Moving cursor to [LOG] item, and pressing [ENTER ] key will enter into inquiry log interface  
1.1 Pro d u ct s S u rve y  
The equipment isa kind of small channels digital monitoring products which is specially designed for  
Input date and type of the log  
Type: All Event  
security industry. It adoptsthe embedded processor and operating system and also integrates the  
most advanced technologies in IT field, such as using MPEG- 4 video and audio compressing /  
decompressing, recording by hard disk with big volume, TC P/ IP network and other technologies.  
The code solidity in FLASH has changed the traditional mode of Monitor with DVR . It integrates  
the Monitor with DVR instead which not only is more convenient for users to operate but also  
makes the system more stable and convenient for maintenance.  
Date : 2006- - 04- - 28- - 23- - 30  
Start  
R eturn  
Format: includes all events recording mode, alarm mode, motion detection and operation mode;  
According to the need select check time and click start.  
1.2 Pro d u ct s Pro pe rt ie s  
1. All Events: R ecord all system operation and alarm record;  
l
Adopting the high- speed embedded micro- controller and also real time operating system, the  
system has a super- high stability, high durability, without crash phenomenon and also easy for  
maintenance.  
2. Alarm Events: [ENTER ] key will enter into check alarm log interface. Thisinterface will display the  
alarm situation that happened recently. Moving cursor to "up" and "down" place, and pressing  
[ENTER ] key to turn over page. Alarm log will record exact alarm time in case of Video Loss/ Place  
Setting/ Password Error.  
l
l
Easy Installation and use.  
Log Search: All Event  
Two levels of password protection from administrator and user guarantees the safety of the  
system.  
04- - 02- - 15- - 30,  
04- - 02- - 15- - 30,  
04- - 02- - 15- - 30,  
Video Loss 1  
Place Alarm  
Video Loss 2  
l
l
The system adopts the OSD graphical interfaces, which is more convenient for users  
to follow.  
R eturn Page Up Page Down  
The video compression adopts the pure hardware MPEG- 4 Changeable stream or MPEG- 4 fixed  
streamsupporting the HD1 and CIF resolution recording in each channel, the frame rate for  
recording is adjustable, with high sharpness but super- low hard disk space used.  
Motion De te ction: Temporarily no record, same as in alarm mode;  
Ope ra tion Affa ir: moving cursor to [Operation Log] item, and pressing [ENTER ] key into inquiry  
operation log interface. This interface display recently happen operation situation:  
l
l
Adopts FAT32 format to store, and can take one unit IDE hard disc upto 300GB.  
Log Search: Operation Affair  
For channels video input, two channels video output, one channel VGA output; Two channels  
audio input, two channels audio output and one USB Port.  
04- - 02- - 15- - 30  
04- - 02- - 15- - 30  
04- - 02- - 15- - 31  
04- - 02- - 15- - 35  
Manual Video R ecord  
R estart  
Pan/ Tilt Control  
Parameter Change  
l
Three channels  
input, one channel linkage  
output and one channel troubles  
alarm  
alarm  
output.  
alarm  
R eturn Page Up Page Down  
l
l
R eal time monitoring and playback in single picture mode, dual mode or quad mode  
The system supports turning on and off the machine automatically. In case of power outage,  
it resumes recording automatically once the power is restored. Alarm will go off automatically  
when no video signal is being received. This eliminates the need to monitor the system frequently.  
Moving cursor to "up" and "down" place, and pressing [ENTER ] key to turn over page, so can check  
its record page by page.  
- e19-  
- e4-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
4.1 All Re co rd  
l
Manual R ecording, time recording, alarm recording, motion detection recording saves the hard  
disc space ensuring effective usage of the hard drive space for longer periods of time.  
Moving cursor to [All R ecord] item, and pressing [ENTER ] key will enter into All R ecord interface:  
Mode : moving cursor upon this selection item, and pressing [ENTER ] key can select different video  
record format to inquiry (All video record/ Timing video record/ Alarm Video record)  
Da te Time : Move cursor to this selection , and press [ENTER ] key or directly input the date and time,  
based on the recording date and time you want to playback; N o press [STAR T] to see the available  
recording for that duration. If there is no record found, it will say "No R ecord"  
l
l
Motion detection recording function, can setup more than 192 detecting areas independently.  
The system supports pre- alarm recording and alarm prolong recording guarantees, which  
guarantees the integrity of alarm recording equipment.  
l
Equipped With×2、×4times fast forward/ fast backward play functions and ×1/ 2、×1/ 4、  
×1/ 8 times speed slow motion backward play, pause and frame play and others play control  
functions.  
2006- - 04- - 02 All R ecord  
01 02 03 04 05 06 07 08 09 10 11  
12 13 14 15 16 17 18 19 20 21 22  
U P DN 23 24 25 26 27 28 29 30 31  
N o R ecord  
l
l
l
l
The system supports PAL/ NTSC systemshence this system can be used universally.  
R eturn  
individually  
Brightness, contrast, Color and Tint can be setup  
for each channel.  
Perfect alarm log and operating log facilitatesconvenient analysis and searching.  
When selected date has video record, it will display below interface  
R J- 45 universal network telecom interfacenetwork transmitting ways include ADSLISDN、  
LAN and CAN and so on;  
2006- - 04- - 02 All R ecord  
01 02 03 04 05 06 07 08 09 10 11  
12 13 14 15 16 17 18 19 20 21 22  
T
l
he included client software facilitates the long- distance monitoring and playback on net,  
and supports TCP/ IPUDP/ IP and many other net transport protocols.  
UP DN  
23 24 25 26 27 28 29 30 31  
1 00000000 08: 00 - 09: 00 A 25  
1 00000000 09: 00 - 10: 00 R 25  
1 00000000 10: 00 - 11: 00 R 25  
R eturn  
l
R S- 485 interface equipped with the system can be used to control P/ T/ Z cameras with various  
decode protocols .  
l
VGA output has 720×4801280×720 and 1920×1080 R esolution modes, better quality picture  
could be attained by adopting progressive scanning.  
You can also scroll through other dates during the month to view the recording. If the date is in  
yellow color it means that there is a recording for that particular day. Press [ENTER ] to view  
the available recording for that day.  
l
l
Supporting IDE hard disk material backup.  
Equipped with USB2.0 interface to the system,which could be used for backup to your PC or  
laptop directly from the DVR hard drive .  
2006- - 04- - 02 All R ecord  
01 02 03 04 05 06 07 08 09 10 11  
12 13 14 15 16 17 18 19 20 21 22  
UP DN 23 24 25 26 27 28 29 30 31  
1 00000000 08: 00 - 09: 00 A 25  
1 00000000 09: 00 - 10: 00 R 25  
1 00000000 10: 00 - 11: 00 R 25  
Return  
- e5-  
- e18-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
CBR: Denotes fixed code flow'scoding format, this coding format shows, image quality is  
invariable, but image quality can change according to moving object's scale inside, the larger the  
moving object occupied in image's scale, the worse the image quality  
Me ss a ge Sound S witch: When setting is turn on, hard disk error and password input error,  
machine buzzer will sound.  
Ch a p t er 2 Sys t e m In s t a lla t ion  
2.1 Hard Driv e In st a lla t io n  
Note: please set the hard disc to "Master"mode when connecting to the DVR .  
La ngua ge s etting: Moving cursor to this item and pressing [ENTER ] key can switch Chinese and  
English interface.  
2.2 In te rfa c es o n Ba ck Pa n e l  
P e ak s e gment s etting: Moving cursor to this item and pressing [ENTER ] key can enter into  
corresponding interface.  
P a cking time: Moving cursor upon this item and pressing [EN TER ] key to adjust, can select  
30, 45 and 60 minutes packing time.  
US B 2.0 s etting: Moving cursor upon this item and pressing [ENTER ] key to confirm will turn  
on USB interface  
Ins truction: After turning on USE 2.0 setting you can connect to PC computer (PC computer  
only need USB 2.0 interface), and backup the files on your PC. O nce you select USB2.0 function  
[R eturn], machine will restart.  
EXIT  
3.3.9Th e "  
" ke y  
Move the mouse to the topic of "EXIT" and press enter to save settings and back to the setting menu and  
return the monitor TV screen.  
VIDEO IN 14 Video Input  
VIDEO OUT 12 Video Output  
3.4 S u m m a ry o f o t h e r fu n ct io n s  
US B One Channel USB terminal input  
3.4.1 An a lo g fu n ct io n  
NET O ne Channel NET terminal Input  
When the system is in the single screen mode, the user can adjust the picture quality  
AUDIO IN O ne Channel left/ O ne Channel right audio input  
Brightne s s : press the analog key on the remote control, the screen will show "Brightness" on  
the top right hand corner . Press "- " or "+ " to adjust the brightness as desired.  
S a turation: Press the "Analog" key for second time and "Saturation" appears on the top right  
hand corner. Press "- " or "+ " to adjust the saturation as desired.  
AUDIO OUT O ne Channel left/ one Channel right audio output  
VGA One Channel VGA terminal input  
ALARM  
Contras t de gree : Press the "Analog" key for third time and "Contrast" appearson the top  
right hand corner. Press "- " or "+" to adjust the contrast as desired.  
1
2
Alarm output  
Alarm output  
Ground wire  
Hue : Press the "Analog" key for the fourth time and "Hue" appears on the top right hand  
corner. Press "- " or "+ " to adjust the color as desired.  
After running system, by pressing [Check] key will enter into inquiry menu, screen will display  
main menu, pressing direction key to select wanted check item, and press [EN TER ] key enter  
into this item.  
1
Alarm input  
Alarm input  
Alarm input  
1
2
3
4
5
6
7
8
9
2
3
Search Menu  
All R ecord  
Log  
Ground wire  
B
A
485  
R ecord Status  
HDD Status  
Machine Info  
Exit  
485  
- e17-  
- e6-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
3.3.6 Ne t Pa ra m e t e r  
Cha p t e r 3 S ys te m Op e ra t in g Man u a l  
Move the cursor to the net parameter and pressenter to get into the system's net interface setting.  
See picture below:  
3.1 In s t ru ct io n s for fro n t p a n el a n d re m o t e co n tro l u n it  
3.1.1 Fro n t Pa n e l  
a). IP a ddres s : Press enter or manually type numbers on the IP address line.  
b). S ub- ne t Ma s k: Moving cursor upon this selection item and pressing [ENTER ] key or input  
number directly, set host IP address correctly according to host local LAN  
c). De fa ult Ga te way: setting according to IP address  
POWER  
H.D.  
ALA RM  
NET  
IR  
d). Ba ndwith: Thisfeature can be used to set the speed of transfer of data over the network  
Buttons on front panel and their functions:  
Indicating light area  
3.3.7 Sys t e m In fo rm a t io n  
(n e e d s cre e n sh o t )  
NETIndica ting light for ne twork  
Moving cursor over [System information] and pressing [ENTER ] key enter into system  
information setting interface.  
When network connection is ok, it displays green, and when data is transferring it flashes.  
ALARMIndica ting light for a la rm  
The alarm light will be on once the alarm is started  
3.3.8 Ba s ic p a ra m e t e r  
no matter what kind of alarm it is for)  
H.D. Indica ting light for Ha rd Disk  
The light turns on when Hard Disk reads and writes the data.  
P OWER Indicating light for powe r  
Ba s ic S e ttings  
R ecord Settings:  
Buiz Settings:  
Setup  
The power is on if the light turns red  
Close  
Buttons a rea  
Language Settings:  
Fastigium Settings:  
R ecordbag Settings:  
USB Settings:  
English  
O pen  
Me nu ope ra ting buttons  
UP Directional button;  
Down Directional button;  
Left Directional button;  
R ight Directional button  
30 minute  
Setup  
Video Spot Settings:  
05 Second  
【 】button for confirmation,choosing the menu items, and press this button to enter into  
the selected sub- menuPressing this button can display the real time of the system  
when playing back the recording;  
Moving cursor to [Basic parameter] item (bottom color of character change to white means being  
selected) and pressing [ENTER ] key enter to this item selection setting interface:  
Afte r ente ring into s ub- me nu, move curs or up and down to s croll through the s ub  
me nu.  
Fu n ct ion al Bu tt o n s Area  
【 】Button Main Menu, used for setting each parameters of the system.  
Play the existing recording on the hard drive;  
【 】Button  
【 】Button  
Checking the menu buttons, used for checking recorded information on the hard disc;  
Video recording parameter setting: Moving cursor upon this item and pressing [ENTER ] key takes  
you to the corresponding interface.  
【 】Button Exit buttonexit from the current operating menu to last selected menu  
Button: R ecording button,four channels manual recording can be started at the same time  
when the screen is in built- in quad mode, dual views manual recording can be started  
when the screen is under two channels surveillance state; Single channel Manual  
recording can be started when the monitor is under single channel surveillance state  
【 】  
Image quality: Divided into "1- 8" different parameters. Press[Enter] to change this parameter  
The smaller the digit, the better the image quality.  
, it can divide into "251206" three  
Frames per second: When system has been set to PAL format  
Button:  
Button:  
Button:  
recording  
2 and 4 times;  
For stopping the recording button and the  
manual  
1508"three ranks.  
ranks, when system has been set to NTSC format, it can divide into "30  
Fast R ewind button, at speed of ×  
×
Moving cursor upon this item and pressing [ENTER] key will change its parameter.  
Play f  
fast forward button  
ast forward of the recorded picture at speed of ×2  
Format: Moving cursor upon thisitem and pressing [ENTER ] key can switch system's video record  
times;  
and ×4  
: VBR CBR .  
coding format  
Button:  
Press this button continuously to see the picture frame by frame;  
VBR: Denotes changeable code flow's coding format, this coding format shows, image quality is  
invariable, but data code flow's size can change according to moving object's scale inside, the larger  
the moving object occupied in image's scale, the larger the code flow.  
Button:  
between  
mode;  
built- in quad, dual and single picture  
Used for switching  
:
in the following order  
Channel 1 Channel 2 Channel 3 Channel 4 Dual Views (Channel 1-  
Channel 2) Dual Views (Channel 3- Channel 4) Built- in quad Channel1  
- e7-  
- e16-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
3.1.2 Re m ot e Con t ro l Un it  
3.3.5 Ho u s in g s e t t in g  
Moving cursor upon [Pan/ Tilt setting] and pressing [ENTER ] key can enter into quad channel  
LOGI N/ LOCK  
POWER ON  
Pan/ Tilt port setting interface  
PLAYBACK  
QUAD  
1
4
7
2
5
3
6
9
A. Channel: Denotes system's channel number.  
PARAMET ER  
ANAL OG  
8
+
0
B. Protocol: Denotes the communication protocol between system and decoder. Moving cursor  
to this selection item and pressing [EN TER] key can make selection among different protocol  
(Pe1co- D/ P/ 09- 15/ Dscp/ FastDome/ PIH1016- 1017/ JECFastD/ R M110/ Neocam) Selected  
protocol must match to the protocol of decoder, only can it control front equipment correctly.  
C. Baud rate: Denotes communication speed between system and decoder. Moving cursor to this  
item selection and pressing [ENTER ] key can make selection among different baud rate  
(1200/ 2400/ 4800/ 9600), selected baud rate must match decoder's baud rate, only can it control  
front equipment correctly.  
ZOOM+  
ZOOM-  
FO CUS+  
FO CUS-  
EXI  
T
AUTO  
RECALL PRESET SWI TCH  
PLAY  
SLOW  
REV  
CF  
FWD  
NET  
RECORD  
STOP  
SET UP  
F1  
F 2  
F3  
F4  
D. Pan/ Tilt code: Moving cursor upon this selection item and pressing [EN TER ] can make  
selection among different Pan/ Tilt serial number (01- 63), system's 01 code number match  
Bu t t o n s o n Re m o t e Co n t ro l Un it a n d t h e ir fu n ct io n s :  
Digital Buttons Are a  
to decoder's first address code, that is address code "01"  
E. After setting up all item selection, move cursor to [R ETUR N] and press [ENTER ] key will  
Button:  
when under the  
0- 9】  
Digital buttonsused for using digit input or video switch  
built- in quad state, press 1234 digit buttons mean to switch the picture  
return toprevious menu, and save Pan/ Tilt parameter setting.  
output to the first, second, third and forth channel video single picture  
Attention: Pan/ Tilt protocol, baud rate, Pan/ Tilt serial number three items must be in  
accordance with outer Pan/ Tilt (quick ball) setting parameter.  
Button:  
Adjusting various parameters  
+】、【-  
Me nu Ope rating Buttons Are a  
Pan / Tilt operation: After setting Pan/ Tilt parameter correctly, press [F2] key on remote  
control under single monitoring state, the top left corner of screen will display "Pan/ Tilt control"  
character, temporarily, we can operate this channel's Pan/ Tilt by using press [F2] key on remote  
control and panel.  
UP Directional button;  
DOWN Directional button;  
LEFT Directional button;  
R IGHT Directional button;  
button:  
, and press this button to enter  
ENTER  
for confirmationchoosing the menu items  
【 】、【 】  
【 】、【 】  
Ke y: Lensup and down motion, display character: up and down;  
into the selected sub- menuPressing this button can display the real time  
Ke y: Lensleft and right motion, display character: Pan/ Tilt left and right;  
of the system when playing back the recording  
】、【  
Cha nge time s +  
Cha nge time - Key: Adjust image far and near extent, display character:  
P la tform control function buttons  
- Button:  
Change times + and change times - ;  
】、【  
ZOOM+ZOOM  
Adjust the distance of the picture  
- Button:  
APERTURE+】、APERTURE  
Adjust the brightness of the picture  
Ape rture - Ke y: Adjust image bright and dark extent, display character:  
Aperture +  
- Button:  
Adjust the sharpness of the picture  
FOCUS +】、【FOCUS  
Aperture + and aperture - ;  
Button:  
Control automatically  
AUTO】  
RECALL  
PRES ET  
SWITCH  
Focus +】、【Focus - Ke y: Adjust image clarity extent, display character: Focus + and focus - ;  
Button:  
Button:  
Button:  
standby button in control of platform  
Automa tic Ke y: signifies automatic control, display character: Automatic  
, standby button;  
Preset control on platform  
Trans fe r Ke y: Pan/ Tilt transfer control, display character: transfer 00, back key;  
control on some assistant switch  
P re- s e t Ke y: Pan/ Tilt preset control, display character: preset 00, back key.  
P la y function buttons  
Was he r switch/Light Ke y:  
Washer switch and light assistant switch control, display character:  
Button:  
PLAY】  
Play the the recording on the hard drive  
Washer switch;  
Button1/ 2、×1/ 4、×1/ 8 timesor press  
SLOW】  
Play the images slowlyat speed of ×  
Pressing [F2] and [Pan/ Tilt] once more will exit Pan/ Tilt operation, and return to single image  
monitoring state; Switch monitoring image and pressing [F2] key can enter into another channel  
Pan/ Tilt operation.  
play button to return to normal playing speed  
Button:  
PAUS E/S ETP  
Press one time to Pause the picture ,and then presscontinuously,  
picture will be displayed frame by frame, press Play button to  
Wa rning 1: When operating Pan/ Tilt function, system can't startup manual video recording  
function.  
return to normal speed of playing.  
Play fast forward of the playback pictureat the speed of×  
Button:  
2、×4 timespress  
FWD】  
Wa rning 2: When operating Pan/ Tilt function, once system startup video record (timing or  
alarm startup), temporarily can't affect Pan/ Tilt operation.  
Troubles hooting: When Pan/ Tilt doesn't operate normally, Please check R S- 485 (see "Alarm  
Port lead line definition") and Pan/ Tilt parameter  
P lay Button to return to the normal speed of playing  
Buttonat speed of×2、×4 timespress  
REV】  
Play fast backward of the playback pictures  
P la y Button to return the normal speed of playing  
- e15-  
- e8-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
e).Dela y the ala rm output: Under the alarm recording mode, the system is communicating the  
alarm output signal with the alarm output end point automatically after moving the testing  
signal has received the alarm signal from the I/ O . Delay the alarm output means delaying the  
continuous time of the alarm's output signal.  
Othe r function buttons  
POWER/ONButtonfor turning on and off the machineStandby and start);  
LOG IN/LOCKButtonget the operating rights, to type in the password and lock operation;  
PLAYBACKButtonFor reviewing the recording, log, state of hard disc,information of  
software edition and so on;  
f). I/O a la rm output: Two choices are open or close. When system has received the alarm signal  
from the I/ O, it will alarm from the output end point. When system has not received the alarm  
signal from the I/ O , it will not alarm from the output end point.  
QUADButtonFor switching pictures between built- in quad, dual views and single picture;  
Order of Display: Channel1 Channel 2 Channel 3 Channel 4 Dual views  
(Channel 1- Channel 2) Dual views(Channel3- Channel 4) Built- in  
quad Channel 1  
g).Motion alarm output the same as the above.  
If you do not do the setting for each channel, it means invalid channel and that channel can't record  
video, you can till see the image under monitoring if the channel has image signal But the system will  
not prompt the alarm message if the image signal of this TV screen is lost.  
ANALOGButtondisplay the brightness, contrast, colour and tint, adjusting its parameters  
together with the adjustment of+- buttonThis operation need  
to be performed only when under single picture mode and thischannel should be  
under non- recording state);  
EXITButtonExit buttonexit from the operating menu to last selected menu directly.  
CFButtonEnter into the standby menu for recording material, copy the material in hard disk  
to the outward connected memory devicehardware with CF card connector  
is needed)  
3.3.4 Wo rk S e t u p  
Re cord S e tup  
LANGUAGEButtonEnter into ''language selection''menu directly to setup the language.  
NETButtonStandby button;  
Channel  
Schedule  
Setup  
Area- Set  
Setup  
1
2
3
4
RECORDButtonStart the manual recording in single, dual or quad mode  
STOPButtonStop the manual recordingoperating way is the same with that forre cording】  
button);  
Setup  
Setup  
Setup  
Setup  
Setup  
Setup  
SETUPButtonWhen login the system normally, press this function button to enter into the  
menu setting of the system;  
R eturn  
F1ButtonFor pick time play on the recorded pictures;  
F2ButtonPressthis button to enter into the control menu of platform when under the single  
channel picture.  
The content of the Work Set order includes scheduling recording for each channel and the setting  
up of area for each channel for motion detection.  
Press left, right, up and down buttons can do recording adjustment to platform camera;  
P re s sZoom+】、【Zoom- ButtonAdjust the distance of the picture;  
Pre s sApe rture +Ape rture - ButtonAdjust the brightness of the picture;  
Pre s sFocus +】、【Focus - ButtonAdjust the sharpness of the picture;  
Pre s sAs s is tantButtonControl on some assistant switch;  
Pre s sAutoButtonControl automatically;  
The spe cific ope ra tion of e a ch function is give n be low:  
A.  
Setting the re cording time : Press Setup for each channel under "Schedule" to setup the day  
(Mon- Sun), Time of recording Ist Segment, recording mode(Time, Alarm or motion) Time  
of recording 2nd Segment, type of recording mode. There are 2 segments of recording to  
accommodate the change in date. For example, if you start recording at 11:30pm on Monday,  
the Ist set will be 11:30pm to 11:59pm and the second set will be 12:00am to 11:  
S urve y area s e tting: The picture above is showing that the whole screen is composed of  
192 small areas. The blue color represents the area that has not been selected; the been purple  
represents the area that has been selected; blue color the operating method is once getting into  
the setting interface; the purple small square will be flickering between two colors alternatively  
which are purple and blue.  
Pre s sEve ntButtonstandby button in control of platform;  
Pre s sP re s e tButtonPreset control on platform, standby button;  
Press again the F2button or Exitbutton to exit the  
B.  
setting for the platform control menu;  
F3ButtonStandby Button.  
F4Buttonswitch between the monitor and VGA output;  
Ope ra ting waysPress F4button in remote control unit to switch between  
output of monitor and output of display when under monitoring. Its order is: output  
of monitor VGA 1 VGA 2 VGA 3There are three states for VGA output,  
which can be adopted for different VGA standard.  
If you press [Enter] The small purple square will change its color to two colors which are purple  
and blue and it will be flickering alternatively.  
- e9-  
- e14-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
3.3.2 CHANNEL S ETU P  
3.2 S ys t e m o n / o ff  
3.2.1 Sy s t e m S t a rt  
Channel setup setting includes channel name, screen display, clock insert,  
TV screen cover, etc  
When supplying power to DVR normally, the system enters into stand- by statethe indicating  
light of the powerred led is on permanently)。  
When press theon/ offbutton in the remote control unitthe system is startedpictures  
displayed in the screen are built- in quad imagesthe digit showed in each picture means its video  
input channel N o. the real time will be displayed at the top center of the screen.  
Channel Setup  
CH  
1
Title C H Name Time InSert  
Mask  
Close  
Close  
Close  
Close  
CH View  
Open  
Open  
Open  
Open  
Open  
Down  
Down  
Down  
Down  
Note : If time recording has be e n setup in this ma chine (or a t high peak pe riod),  
a nd powe r is just conne cte d during this period, then the machine will s ta rt and e nte r  
into multi- pictures s ta te dire ctly without ne e ding to pre s son/offbutton again to sta rt  
the ma chine .  
2
Open  
3
Open  
4
Open  
If the re is no dis pla y of vide o input cha nnel No in the s cre en a nd the re a l time for the  
s ys te m, plea s e pre s sENTERbutton on the remote control unit or panel, and the channel  
numbers will be displayed on the screen  
R eturn  
a). Channel: Enter the channel number. If it has a X symbol in front of the channel number code,  
it indicates invalid channel.  
If the hard disc has not been installed before turning on the machine, or the hard disc is not  
detected by the machine after turning it on, the monitor with hard disc will set off the alarm,  
Please log in the system to turn off the alarm.  
Note: For each channel, it means the channel can't record video. However, you can still see the  
channel image under monitoring if the channel has image signal. But, the system will not prompt  
the alarm message if the image signal of this TV screen has lost.  
3.2.2 Sy s t e m Lo g in  
b). Title: Name of the channel. Enter the title of the camera location. Move the cursor to thistopic  
and press enter and enter the channel title. When you have finished, press enter.  
c). Screen Display: Two choices are switch on or switch off. If switch on is selected, it will show the  
channel title while monitoring. If selecting switch off, it will not show channel title while  
monitoring.  
Note :  
P re - delive ry code for this e quipme nt is000the de fa ult pa s s word for  
a dministra tor is 88888888a nd it is 00000000 for us e r. Adminis trator  
ha s a ll the ope rating rights . In orde r to make s ure the s a fe running of the  
s ys te m, administra tors should cha nge its code a nd de fa ult pa s s word of the  
ma chine imme dia te ly.  
d). Time Insert: There are three choices for users, up, down or close. Press Enter to make your selection.  
When option up is selected, the time will be displayed on top of the screen, when option Down is  
selected, the time will be displayed at the bottom of the screen. If the option Closed is selected,  
the time will not be displayed on the screen.  
When the host machine is starteduser can only operate the system when logged in. If there is  
no activity within 100 seconds after logging in, the system will enter into lock state!  
When the machine is just started or under lock up state, press theLogin/LockButton on  
R emote Control Unitthe login interface in the screen will appear, type in the code of the  
machinePre- delivery setup''000''),and then type in the passwordpassword for  
administrator or operator of this machine.  
e). Mask: Two choices for users are switch on or switch off. You can press enter for any changes.  
TV mask used for covering the part of channel which is not to be recorded.  
f). Channel View: Two choices for users are open or close. Open keeps the channel open for viewing  
and close blocks the image from viewing.  
If correct user's password is typed inthe monitor will show '' Password Correct'' message on  
the screen, and then after [R eturn] for confirmationusers can operate each items within  
the permitted field(the default password for user is00000000.  
3.3.3 Alarm Setting  
If correct administrator's password is typed inthe monitor will show Password C orrect  
''  
''  
a). Te rminal: 1, 2, 3,  
4 respectively represent 4 outer I/ O alarm input ports.  
message on the screenand then after [R eturn] for confirmationadministrator can perform  
b). Ope n  
Two choices are open or close. Open indicates the system has received the input alarm signals  
all the operations in the machineThe default password for administrator is88888888)。  
from the I/ O end points. Close indicates the system has not received the input alarm signals.  
/ shortclosed circuit and open circuit.  
C). inputting wa y: Two choices areclose  
option to turn on / off alarm for each channel  
Users have the  
The re a re two pa ss word ma nage me nt- one for a dministra tor a nd a nothe r for us er,  
Note:  
diffe re nt ope ra ting ra nge will be pe rmitte d by inputting diffe rent pa ss word.  
d).  
Dela y a la rm recording: Under the alarm recording condition, the system receives the alarm signal  
from I/ O. The system recording video is according to the time length which the user has already  
set up. The system will stop recording video automatically when it has reached the end of its set time  
since it has not received the alarm signal from the new I/ O .  
- e13-  
- e10-  
PDF created with pdfFactory trial version www.pdffactory.com  
 
LCD WITH BUILT- IN DVR USER MANUAL  
LCD WITH BUILT- IN DVR USER MANUAL  
3.2.3 S ys t e m On a nd Off  
More the Arrow ke y to e a ch s ub- me nu a nd pres s e nte r for s e tting.  
a). Time : When you have adjusted the year, month and day, the time will appeared automatically.  
Move the cursor where you want to make the changes and press enter for adjusting or type in  
the numbers using the remote control.  
on/ offbutton in the  
When the system is under monitoring state, please press twice of the  
remote  
system will change into standby state from  
control unit if you want to turn off the systemThe  
running state when it is offIf you want to restart the system  
the remote control.  
, please press the on/ offbutton  
on  
b). Machine 's s e ria l numbe r: Scope of input number is from ''000'' to ''999''. Machine's serial  
number is already preset to ''000'' when the machine leaves the factory. You need to input  
this number when the system is running.  
If the system is under recording state, turn off or unplug power chord, and then turn on the power to  
make the machine enter into standby state , the machine will start automatically, the recorded files  
will redisplay its chapters.  
c). Machine s addre s s : Enter manually the machine address here. Machine address could be the  
address of the place being monitored thru this system. Move the cursor to the "address" line  
and press enter to be able to enter the address and press enter again when finished. Use the  
remote control to enter the numbers and letters. The number keys could be used for letters  
similar to the keys on a standard telephone. For example "2" represents 2abc and likewise.  
Note: The length input wordsshould be 8 characters or 4 words.  
Note: The turn off ope ration ca n be a ls o be done whe n ma chine is under re cording a nd  
pla ying s ta te .  
3.3 Pro p e rt ie s S e t u p o f t h e s ys t e m  
d). HDD overwrite : You have two options "O pen" & "Close" When "Open" is selected, it will  
allow recording continuously even after the hard drive is full and video will be recording in  
FIFO (First- in- first- O ut) format; When "Close" is selected, it will stop the recording  
function once the hard drive is full.  
When the system is running, press s e tupbutton to e nte r into the OSD main g me nu ma na ge d  
、 、  
to go to the desired menuPressEN TERto enter into each menu, and will be explained  
the next section  
directional buttons on the  
'' remote control unit  
by host ma chine , move the ''  
by one  
.
Vide o Sys te m: The video system can be changed from NTSC to PAL and vice versa using the left  
e).  
and right arrow keys on the remote.  
f). Modify the a dministrator P IN code: Please press enter to get into the setting interface of the  
administrator pin code! You can press the number keys on the remote control to enter the new  
pin code .Please note that only the administrator has the authority to change the pin code.  
g). Opera tor pin code : Press enter to get into the setting interface of the controller's pin code.  
You can press the number key on the remote control to make any pin code corrections. Press the  
Enter key to save this setting.  
3.3.1 S ys t e m S e t u p  
(the color of the characters turns to blue with  
Move the cursor to the position ofSystem setup  
fter entering into  
while bottom)PressENTERbutton to enter into its setting interface  
A
.
the sub- menuhighlight the items with cursor keysto change the value  
S ys te m s et t in g s  
Note: Please memorize your pin code and save it in a secure place to avoid it getting into the  
wrong hands.  
h). HDD format: Use this function to format the Hard drive.  
Time: 2006- - 03- - 30. 09:33:08 Friday  
My Number 000  
Warning: All the data on the Hard drive will be lost.  
i). Default Se tup: This function will reset the system to factory settings  
j). EXIT: This function takes you back to the Main Menu.  
My Address:  
HDD Overwrite: O pen  
System : PAL  
NTSC  
Password Enable: Yes No  
Admin- Pwd- Modify O perate- Pwd- Modifd  
HDD Formal  
Default Setup  
R eturn  
- e11-  
- e12-  
PDF created with pdfFactory trial version www.pdffactory.com  
 

QMotions Games Baseball game User Guide
Radio Shack Answering Machine TAD 1026 User Guide
Radio Shack Cell Phone CT 400 User Guide
RocketFish Noise Reduction Machine RF HTS120 User Guide
RocketFish Surge Protector RF HTS100 User Guide
Rockford Fosgate Car Speaker RFB 1082 User Guide
Ryobi Pole Saw P560 User Guide
Samsung Blu ray Player BDF7500 User Guide
Sanyo Camcorder VPC HD2000 User Guide
Sears Refrigerator 46 71052 User Guide