Q See Camcorder QSM5265W Camera User Guide

QSM5265W Camera

Your cameras feature the latest technology to ensure high quality

images and clear pictures. When connecting your cameras for the

ﬁrst time you may notice a very dark video image or no image at all

even though your DVR does not display a “video loss” message.

This is not a defect, but indicates that your cameras must be

“reset” as follows:

Your cameras feature the latest technology to ensure high quality

images and clear pictures. When connecting your cameras for the

ﬁrst time you may notice a very dark video image or no image at all

even though your DVR does not display a “video loss” message.

This is not a defect, but indicates that your cameras must be

“reset” as follows:

1. With your camera(s) still

connected, cover the lens

end of your camera with

your hand or other object

to completely block it.

1. With your camera(s) still

connected, cover the lens

end of your camera with

your hand or other object

to completely block it.

2. Keep the lens blocked

for 10 seconds. You may

2. Keep the lens blocked

for 10 seconds. You may

see a faint red glow from

the infrared LEDs. This

is another indication that

your camera is working

properly.

see a faint red glow from

the infrared LEDs. This

is another indication that

your camera is working

properly.

SECONDS

3. Uncover the front of the

camera and it should now

adjust to the light level and

operate normally.

3. Uncover the front of the

camera and it should now

adjust to the light level and

operate normally.

Q-See.com • support@dpsi-usa.com • 877-998-3440