PYLE Audio TV Mount PSW771 User Guide

Part 5-Addjustingg display and using cord management  
Route cords along articulating arms using cord management clips(7).  
Articulating arms can be adjusted to position display into desired location.  
Use wrench to tighten and loosen the tension screw. Do not overtighten  
and do not loosen to the point the screws come out.  
INSTALLATION GUIDE  
Item No.::PSW771  
8
9
7
Thank you for choosing our product  
Pyle Audio  
TV size range: 32"~50"  
1600 63rd st , Brooklyn, NY, 11204  
Maximum weight capacity: 40 kg /88lbs  
Adjustable angle: 0°12°  
(718)236-8000  
Warning  
This product contains small items that could be a choking hazard if swallowed. Keep  
these items away from young children!  
www.pyleaudio.com  
1.Make sure these instructions are read and completely understood before attempting  
installation. If you are unsure of any part of this installation, contact a professional  
installer for assistance.  
MADE IN CHINA  
CAUTION  
2.The wall or mounting surface must be capable of supporting the combined weight of  
the mount and the display; otherwise the structure must be reinforced.  
3.Safety gear and proper tools must be used. A minimum of two people are required  
for this installation. Failure to use safety gear can result in property damage, serious  
injury or death.  
This product was designed to be installed on wood stud walls and solid concrete walls.  
Before installing make sure the supporting surface will support the combined load of the  
equipment and hardware. Never exceed the Maximum Load Capacity. This product is  
intended for indoor use only. Use of this product outdoors could lead to product failure or  
personal injury.  
-8-  
 
Part 1aa-Wood SStud Moouunting  
Part 2bb-Attaacching brracketts to scrreen wiith reccessed back  
Use wall plate(1) as a template, make sure it is level, and mark four mounting  
holes along the center lines of the wood studs. Drill four 3/16(5mm)dia.  
holes 2(50mm) deep. Level wall plate(1) and attach to wall with four long  
bolts(J) and four washers(L). Tighten screws firmly. Do not overtighten.  
Center brackets vertically on back of screen. Select the medium(F or G) or  
large(H) screws. Attach brackets to screen using four selected screws,four  
square washers(I) and four spacers(M) at the top and bottom of each bracket.  
Tighten screws firmly. Do not overtighten.  
Square washer(I)  
M
I
Large hole for  
M8 screws  
F-H  
Medium hole for  
M5 and M6 screws  
Stud finder  
2(50mm)  
Wood stud  
3/16(5mm)  
L
J
-3-  
-6-  
 
Part 2aa-Attaacching Brracketts To Scrreen Wiith Flaat Back  
Part 1b--Concrette Wall MMoounting  
Center brackets vertically on back of screen. Select the small(A or B),  
medium(C or D) or large(E) screws. Attach brackets to screen using four  
selected screws and four square washers(I) at the top and bottom of each  
bracket. Tighten screws firmly. Do not overtighten.  
Level wall plate and use wall as a template to mark four holes. Drill four  
3/8(10mm) dia. holes 2(50mm) deep. Insert four anchors(K) into holes  
and secure wall plate with four long bolts(J) and four washers(L). Tighten  
bolts firmly. Do not overtighten.  
Square washer(I)  
I
Large hole for  
M8 screws  
2(50mm)  
A-E  
Medium hole for  
M5 and M6 screws  
Φ3/8(10mm)  
Small hole for  
M4 screws  
Concrete Wall  
K
L
J
-5-  
-4-  
 

QSC Audio Speaker System SC 312X User Guide
Radio Shack Speaker 21 549 User Guide
Radio Shack TV Antenna VU 210XR User Guide
RBH Sound Speaker MC 616 User Guide
Rolls TV Cables DB14 User Guide
Rosen Entertainment Systems DVD Player CV6821 User Guide
Rosewill Network Card RNX G1 G1W User Guide
Samsung Air Conditioner MH026FNCA User Guide
Samsung Router CYSWR1100 User Guide
Samsung Security Camera SCC B5366 User Guide