LX Series Heavy Duty Steel Exit Sign LX
Page 1 of 1
AC Only or Emergency Operation Steel Exit Sign with LED Illumination
The LX Series is constructed of heavy duty 20 gauge steel with a white powder coat finish standard. Illumination is accomplished with long lasting, high out-
put LEDs for long service life.
6.8”
4.8”
17.3 cm
12.2 cm
2.0”
5.1 cm
7.8”
19.9 cm
12.5”
31.8 cm
2.5”
6.4 cm
Complete Fixture consists of base exit sign. Select options and accessories below.
How to Specify:
LX
W
SERIES
Battery
# OF
FACES
LETTER
COLOR
HOUSING
COLOR
W = White
LX = LX Series Heavy
A = AC Only
1 = Single
R = Red
Duty Steel Exit Sign
N = Emergency Operation
2 = Double
U = Universal
G = Green
Features
Options
1. Illumination: Illumination is accomplished with long lasting, high output
Light Emitting Diodes (LEDs). LEDs and support electronics have an expected
life of 25 years.
2CKT1 = Two circuit, 120 VAC
2CKT2 = Two circuit, 277 VAC
SD = Self-Diagnostics
2. Housing: Constructed of 20 gauge steel. Suitable for ceiling, end and
surface mount applications. Includes universal stencil with field selectable
chevrons. White housing is standard.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Emergency operation version includes a charging system
complete with low voltage disconnect, AC lockout, brownout protection, AC
indicator lamp and test switch.
BF = Buzzer/Flasher (emergency operation only)*
BZ = Audible Buzzer (emergency operation only)*
EX = Special Input Transformer (specify voltage & frequency)
FA = 24V Fire Alarm Interface*
FL = Emergency Flasher
SW = Special Wording (per face charge, one-time artwork setup charge will apply)
* Not available with self-diagnostics (SD) option
4. Battery: Maintenance free, sealed nickel cadmium battery has an estimated
service life of 10 years, and an operating temperature range of 20°F (-7°C) to
95°F (35°C).
Accessories
XCKITW = Canopy Kit, white finish
5. Self-Diagnostics: Self-diagnostics option includes a fault indicator LED and
microprocessor circuitry that automatically indicates battery and charger sta-
tus. An automatic monthly test assists user in meeting requirements of NFPA
31-1.
6. Input Power Requirements (at 120 VAC):
AC Only
DCKCE06 = DC Conversion Kit, 6 VDC, 5.4 watt lamps
DCKCE22 = DC Conversion Kit, 12 VDC, 5.5 watt lamps
XPKIT12W = Pendant Kit, 12”, white finish (consult factory for pendant lengths in excess of 12”)
WG4 = Wireguard for Exit Wall Mounting
WG10 = Wireguard for Exit End Mounting
Red = .046A (120 VAC), .020A (277 VAC)
Green = .033A (120 VAC), .014A (277 VAC)
Self-Powered
Red = .090A (120 VAC), .039A (277 VAC)
Job Information
Type:
Green = .090A (120 VAC), .039A (277 VAC)
7. Warranty: Electronics: 3 years; Battery: 5 years full, 5 years pro-rata
Job Name:
Cat. No.:
Code Compliance
UL 924 listed, UL Damp Location Listing optional.
National Electrical Code (NEC), NFPA70 and NFPA101 life safety codes; and
OSHA safety code illumination standards.
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|