NETGEAR Network Router DG834GT GTB User Manual

Note: Use one-line filters for connecting additional phones.  
Log in to the DG834GT/GTB  
2
54 Mbps Wireless ADSL Firewall Router DG834GT/GTB  
C
Note: Your computer needs to be configured for DHCP. For help  
with this, see the Reference Manual or tutorials on the 54 Mbps  
Wireless ADSL Firewall Router Resource CD that came with the router.  
Line  
Start Here  
a. Connect to the router by typing http://192.168.0.1 in the  
Before you begin, locate the ADSL configuration information from your  
Internet Service Provider (ISP). Also, if you purchased the  
DG834GT/GTB in a country where a microfilter is not included, you  
must acquire one.  
address field of your Internet browser.  
B
b. When prompted, enter admin for the user name and password  
for the password, both in lower case letters. After logging in, you  
will see the menu below.  
Connect the DG834GT/GTB to the ADSL Line  
1
ADSL signals degrade phone sound quality. Microfilters block such  
problems and are required for each phone or fax. There are two types:  
one-line microfilters; and two-line microfilters which include a built-in  
c. Connect the ADSL port (B) of the DG834GT/GTB to the  
ADSL connector of the two-line filter.  
Note: Improperly connecting a filter to your DG834GT/GTB  
blocks ADSL signals and prevents connecting to the Internet.  
d. Connect the Ethernet cable (C) from a LAN port of your  
DG834GT/GTB to the Ethernet adapter in your computer.  
Note: The unshielded RJ-45 Ethernet cable is supplied for the  
connection of the NETGEAR product to your PC and is not  
intended for connection to the telecommunications network.  
splitter. Sharing a phone outlet with two  
devices requires a splitter.  
If you do not see the menu above, click the Setup Wizard link  
on the upper left of the main menu.  
e.  
Plug in the router and verify the following:  
The power light is lit after applying power to the router.  
The procedure below illustrates using a  
two-line combo microfilter/splitter. You  
can accomplish the same result using a  
Connect to the Internet  
Note: See the Reference Manual on the Resource CD for wireless setup  
steps.  
The ADSL link light is solid green, indicating a link has  
been established to the ADSL network.  
3
Line  
one-line microfilter with a separate phone  
f. Now, turn on your computer and verify the following:  
The local lights are lit for any connected computers.  
line splitter.  
a. Choose your country and language. Click Next to let the Setup  
Wizard detect the type of Internet connection your have.  
a. Insert the filter into the phone outlet  
A
and connect the phone to the phone  
connector (A).  
If software usually logs you in to the Internet, do not run it.  
b. Follow the steps in the Setup Wizard to input the Internet  
configuration parameters from your ISP.  
The Internet Explorer Tools Internet Options Connections page  
should be set to “Never dial a connection.”  
b. Turn off your computer.  
Note: If you were unable to connect to the router, please refer to the  
Troubleshooting Chapter in the Reference Manual on the Resource CD.  
g. Install a filter on each phone device that shares the phone line  
with your router.  
 

Miele Food Warmer EGW2062 User Manual
MTX Audio Stereo Amplifier TA7402 User Manual
National Instruments Computer Hardware PCI 1200 User Manual
NordicTrack Treadmill NTTL11513 User Manual
NuTone Door LA500K User Manual
OEM Systems Speaker System RS 69 User Manual
Oki Automobile Alarm Vehicle Alarm User Manual
Outback Power Systems Welding System FX 2024 T User Manual
Panasonic All in One Printer KXF150 User Manual
Paradyne Network Card HOTWIREt 7984 User Manual