EIA /TIA 568B
Wire Color
Orange/White
Orange
The Kramer WP-306 Wall Plate
PIN
1
Congratulations on purchasing your Kramer WP-306 Wall Plate which is ideal for
boardrooms and presentation rooms.
2
3
4
5
6
7
8
Green/White
Blue
The WP-306 is a single-gang wall plate insert.
Blue/White
Green
WP-306 Wall Plate US Version
Brown/White
Brown
Pair 1
Pair 2
Pair 3
Pair 4
4 and 5
1 and 2
3 and 6
7 and 8
Figure 2: RJ-45 Pinout (U.S.)
WP-306 Wall Plate EU/UK Versions
Destination England and the rest
Destination Belgium and Germany
of Europe (excluding Belgium and
Germany)
Rear panel view
Figure 1: WP-306 Wall Plate US Version Front and Rear View
Table 1: WP-306 Wall Plate US Version Front and Rear Features
#
Feature
Function
1
ON LED
Lights red when receiving power (when no signal is detected); lights
green when receiving a signal
2
3
HDMI IN Connector
Connect to the HDMI digital source
IR OUT 3.5mm Mini Connector
Connect to a machine via an IR Emitter. Note, that the IR output is
only compatible with the SV-552
Figure 3: WP-306 Wall Plate EU/UK Version Front and Rear Views
Table 2: WP-306 Wall Plate EU/UK Version Front and Rear Features
4
5
RJ-45 Connector
Connect to the SV-552 Processor/Controller. Note that the WP-306
requires BC-DGKat524 or BC-DGKat-623 cable for connection
DC IN Power Connector
Connect to the 12V power supply (supplied free)
#
Feature
Function
1
ON LED
Lights red when receiving power (when no signal is
detected); lights green when receiving a signal
Wiring the Twisted Pair RJ-45 Connector
2
3
HDMI IN Connector
Connect to the HDMI digital source
The US versions of the wall plates are equipped with RJ-45 terminals. Figure 2 defines the
STP pinout using a straight pin to pin cable with RJ-45 connectors. For STP cable, cable
shielding must be connected/soldered to the connector shield.
IR OUT 3.5mm Mini Connector
Connect to a machine via an IR Emitter. Note, that the IR
output is only compatible with the SV-552
4
Terminal Block
Connect to SV-552. Note that the WP-306 requires
BC-DGKat524 or BC-DGKat-623 cable for connection
Note: For cabling WP-306 wall plates, use either Kramer BCP-DGKat524 or
BCP-DGKat623 STP cables.
5
6
GROUND Connection
Ring tongue terminal and grounding screw
Connect to the 12V power supply (included)
GND +12V 2-pin Power Terminal Block
