Kompernass Clock Radio KH 2214 User Manual

KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 1  
UK  
Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum  
ID-Nr.: KH2214.15.16-07/06-V1  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 3  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 4  
KH2214  
ƿ
ƺ Ƹ  
ƹ
¹
ƾ
ƽ
µ
¸
ƻ
Ƽ
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 5  
KH2215  
ƽ
ƿ
¹
ƺ
¸
Ƹ
ƹ
ƾ
µ
ƻ
Ƽ
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 6  
KH2216  
ƿ
ƻ
ƺ Ƹ  
Ƽ
ƹ
¹
µ
¸
ƽ
ƾ
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 7  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 3  
KH 2214 / 2215 / 2216  
Projection clock with Radio  
1. Intended Use  
2. Technical Data  
3. Safety Instructions  
4. Connection  
4
4
4
6
5. Controls  
6
6. Setting the clock  
LED display  
7
7
Projection display  
7
7. Setting the wake-up time  
8. Radio reception  
9. Setting the alarm  
Set the radio alarm  
8
8
8
8
Set the alarm tone  
9
10. Switching off the alarm  
11. Sleep timer  
9
9
12. Cleaning and Care  
13. Disposal  
10  
10  
11  
14. Warranty & Service  
Read the operating instructions carefully before using the appliance for  
the first time and preserve this booklet for later reference. Hand over the  
manual to anyone, whom you pass on the appliance to.  
- 3 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 4  
KH 2214 / 2215 / 2216  
Projection clock with  
Radio  
3. Safety Instructions  
Keep this manual for future refe-  
rence and pass it on with the  
equipment to any future users.  
1. Intended Use  
This appliance is designed for the  
reception of AM / FM radio sta-  
tions. It is indended for domestic  
use. It is not intended for commer-  
cial use.  
a) To avoid risks of electrical  
shock:  
• Make sure that the power cord  
never becomes wet or damp  
during operation. Lay the cord  
such that it does not get clam-  
ped or otherwise damaged. If  
the mains cable is damaged,  
get it replaced by the customer  
service, before using the instru-  
ment again.  
2. Technical Data  
Mains voltage: 230 V / ~50 Hz  
Back-up power: 9 V Battery block  
(type 6LR61) (Not included in the  
scope of delivery)  
Power consumption: 6 W  
Frequency ranges:  
• Do not place candles or other  
open fire sources on the appli-  
ance.  
• Use the clock in dry environ-  
ments only.  
• Make sure that fluids or any  
other objects do not get inside  
the device.  
AM (MW): 530 – 1600 KHz  
FM (UKW): 87.5 - 108 MHZ  
Alarm functions: Radio,Alarm sound  
Operating temperature range:  
+5°... +40°C  
• Position the appliance near the  
wallsocket.Make sure that the  
wall socket is easily accessible  
- 4 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 5  
KH 2214 / 2215 / 2216  
• Do not open or repair the ap-  
pliance casing yourself. In this  
case, the device is not safe and  
the warranty is voided. Repairs  
are to be carried out exclusively  
by a specialist firm or the service  
centre.  
c) Electromagnetic fields  
This device does not cross the per-  
missible limits of electro smog  
within the casing. However, if you  
still have doubts about installing it  
in the bedroom:  
• You will be quite safe if you  
place the appliance about half  
a meter from the bed.  
b) To avoid risks of fire and in-  
juries:  
• Set up the appliance in an  
open and well-ventilated area,  
so that there are no heat  
pockets.  
Never cover the ventilation  
holes.  
• Avoid any additional heat build  
up, e.g. direct sunlight, heaters,  
other devices, etc.  
• Do not allow children or elderly  
persons to play with the appli-  
ance unsupervised, as they are  
not always able to assess the  
possible dangers correctly.  
At this distance, there will be no  
effect even on persons sensitive to  
electromagnetic fields.  
Note: This appliance is equipped  
with non-slip rubber feet. As floor  
surfaces can consist of different  
materials, which are treated with  
the most various cleaning agents,  
it cannot be absolutely guaran-  
teed that these agents do not con-  
tain substances that affect and  
soften the rubber feet. If necessa-  
ry, place the appliance on a non-  
slip base.  
- 5 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 6  
KH 2214 / 2215 / 2216  
4. Connection  
5. Controls  
Before operating the device, make  
sure that it is in perfect condition.  
Do not use it otherwise.  
ƿ Open the battery compartment  
at the back or underneath, and  
insert a 9V battery pack. (Type  
6LR61)  
Ƽ Insert the power plug into the  
power socket.  
Select a socket which is acces-  
sible at any time, so that the  
plug can be quickly pulled out  
in case of any problem.  
TUNING  
FM/AM (Band selector)  
VOLUME (volume control)  
SLEEP (Sleep timer)  
ALARM Set / Off  
SNOOZE  
MIN (LED display)  
HOUR (LED display)  
TIME (time setting LED display)  
µ Function switch ON OFF AUTO  
BUZZ  
¸ Projection On/Off  
¹ FOCUS (for projection)  
Ƹ HOUR (Projection display)  
ƹ MIN (Projection display)  
ƺ TIME (time setting Projection  
display)  
Note: Rechargable batteries can-  
not be charged via the battery  
connection. In case of a long po-  
wer supply failure (several hours),  
you must check and adjust the  
time and alarm time if necessary  
ƻ UKW / FM antenna  
Ƽ Power cord  
ƽ Frequency scale  
ƾ Display  
ƿ Battery compartment  
- 6 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 7  
KH 2214 / 2215 / 2216  
6. Setting the clock  
¹ Adjust the sharpness of the  
projection display by rotating  
the small FOCUS wheel.  
Note: the display is visible only in  
darkness at a distance of more  
than approx. 0.5 m (e.g. on the  
ceiling).  
Separate settings must be made in  
the clock for the LED and projec-  
tion displays.  
a) LED display  
While you keep the TIME key  
pressed:  
Press the HOUR key to set the  
hours.  
Press the MIN key to set the  
minutes.  
If you can see the time display on  
the projected area clearly...  
ƺ while you keep the TIME key  
pressed:  
Ƹ Press the HOUR key to set the  
hours.  
b) Projection display  
ƹ Press the MIN key to set the  
minutes.  
¸ Place the PROJECTION switch  
in the ON position to switch on  
the projection display.  
In case of poor lighting, direct  
the projection beam against a  
wall or a similar surface.  
The set time is automatically  
accepted as soon as the TIME  
button O is released.  
- 7 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 8  
KH 2214 / 2215 / 2216  
7. Setting the wake-up  
time  
Note: To improve the reception of  
radio stations in the UKW/FM fre-  
quency range, point the end of the  
antennaƻ slowly in various direc-  
tions.When you have found a suita-  
ble position for the reception of the  
set radio station, secure the antenna  
ƻ in this position, e.g. with a strip  
of adhesive tape.To receive MW/AM  
radio stations, a fixed receiver an-  
tenna is installed in the appliance.  
For improved reception, alter the po-  
sition of the appliance in radio mode.  
If the time for the LED display is  
set as explained above:  
while you keep the ALARM Set  
/ Off key pressed:  
Press the HOUR key to set the  
hours.  
Press the MIN key to set the  
minutes.  
8. Radio reception  
µ Place the function switch in the  
ON position.  
9. Setting the alarm  
Turn the volume control button  
VOLUME to a medium posi-  
tion.  
Select the radio band on the  
band selector AM/FM.  
Search the desired transmitter  
with the help of TUNING  
control.  
You can wake up to the radio or  
set an alarm sound.  
Once the time for LED display and  
the wake-up time have been set  
as explained above:  
a) Set the radio alarm  
Place the volume control but-  
ton VOLUME at the volume ap-  
propriate to wake you up.  
- 8 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 9  
KH 2214 / 2215 / 2216  
µ Place the function switch in the  
AUTO position. The alarm is  
now switched on. The LED di-  
splay shows a point to the bot-  
tom left ( bottom right for  
11. Sleep timer  
If you would like to listen to the  
radio for a while before going to  
sleep and would like the radio to  
switch off by itself:  
KH2215 ), as an indicator.  
press the SLEEP key.The radio  
will remain on for 59 min.  
You can shorten the time remai-  
ning till switch-off time by ...  
keep the SLEEP key pressed  
and simultaneously adjust the  
remaining time with the  
Min key.  
b) Set the alarm tone  
µ Place the function switch in the  
BUZZ position. The alarm is  
now switched on. The LED di-  
splay shows a point to the bot-  
tom left ( bottom right for  
KH2215 ), as an indicator.  
You can extend the time up to  
switching off by...  
10. Switching off the alarm  
keeping the SLEEP button  
pressed  
Press the SNOOZE key, and the  
alarm repeats after 9 minutes.  
Press the ALARM Set / Off key  
to put the alarm off until the  
next day.  
µ Place the function switch in the  
OFF position to switch off the  
alarm function completely.  
and at the same time adjusting  
the remaining time via the  
HOUR button.  
The sleep timer can be set to a  
maximum time of 1:59 h.  
To stop the SLEEP function and  
switch the radio off...  
Press the SNOOZE key.  
- 9 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 10  
KH 2214 / 2215 / 2216  
12. Cleaning and Care  
13. Disposal  
Warning: Danger of electrical  
shocks.  
• Pull the plug out of the socket  
before cleaning.  
Do not dispose of the  
device in normal dome-  
stic waste.  
• Never open the casing of the  
device. There are no operating  
controls inside.  
Dispose of the device over a regi-  
stered waste disposal firm or  
through your communal waste di-  
sposal facility.  
Clean the instrument only with  
a soft, dry piece of cloth.  
Do not use any cleansing  
agents or solvents. They can  
damage the plastic surfaces.  
Observe the currently valid regula-  
tions. In case of doubt, consult  
your waste disposal facility.  
Battery disposal!  
Batteries may not be disposed of  
with normal domestic waste. All  
consumers are statutorily obliged  
to dispose of batteries at the col-  
lection point in their community/  
district or with the original sup-  
plier.  
The purpose of this obligation is to  
ensure that batteries can be dispo-  
sed of in an environmentally-  
friendly manner.  
Only dispose of batteries when  
they are fully discharged.  
- 10 -  
 
KH2214_2215_2216_IB_UK 12.07.2006 16:21 Uhr Seite 11  
KH 2214 / 2215 / 2216  
14. Warranty & Service  
The warranty conditions and the  
service center address can be  
found on the warranty slip.  
Kompernaß GmbH  
Burgstrasse 21  
44867 Bochum  
- 11 -  
 

Ingersoll Rand Heat Pump 650616 X C User Manual
Ingersoll Rand Heat Pump PM05P X X A02 User Manual
Ingersoll Rand Musical Toy Instrument FA5 User Manual
JVC Camcorder Accessories AA V40EG User Manual
JVC MP3 Player SR VS20U User Manual
Kenwood Stereo Receiver KMM 100 User Manual
King Canada Grinder KC 690L User Manual
KitchenAid Microwave Oven KCMS1655 User Manual
Knoll Stereo Amplifier KES400 User Manual
Kompernass Laminator KH 4418 User Manual