CIS-169
April 1995
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
Wind off
Remove Film
3
1
Shutter Button
Thumbwheel
• Check the frame counter window.
• X’s must be visible.
• Use tool to bend cover back and remove film.
• If not, grip camera, press shutter button, and
turn thumbwheel untill film is fully rewound.
Open Film Door
Remove Battery
2
4
Opened Camera with film and battery removed.
Exposed Film
Battery
• Insert special tool into end slot (as shown).
• Repeat the same steps at opposite end of
camera to remove battery.
• Place in recycle bin.
• Return to Kodak for recycling.
5
CAUTION: This camera body
contains a high voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.
CAUTION: To avoid injury, use tool
carefully.
©Eastman Kodak Company, 1996
|